Product Description

*

AllBrands is an Authorized Juki Dealer and Service Center for any repairs needed including warranty parts, electrical and labor. We give unlimited technical support by email, fax and phone. We service machines in our stores. Mass merchants do not have tech service or repair departments for your equipment. They are unable to help you directly, only referring any operational, mechanical or electronic questions back to the manufacturer instead of taking care of the problems themselves. Manufacturers and customers should expect that any problems you have will be taken care of by the dealer or merchant who sold you the equipment, not by just referring your questions back to the manufacturer.

  • Compared to MO644D and prior models, adds external controls for stitch length and differential feed on right side above the hand wheel, 2 thread adaptor, and safety switch on door that will not run machine unless door is closed

  • Sews High-Speed Stitches on 2-Needle
  • 2/3/4 Thread Overlock
  • Best Built-In Rolled Hem
  • No need to change needle plate
  • Easiest Differential Feed
  • Most Reliable Serger on the market with the least repairs.


    Juki Home Serger Comparison Chart
  • Manufacturer's US warranty 5 Years Mechanical, 2 Years Electrical, 90 Days Adjustments on defects in material or workmanship.
  • Non-US Warranty: To view the warranty for this combo, please view specific warranty information on the individual product pages.
Specifications
  • Sewing Speed: max. 1,500 spm
  • Number of Threads: 2/3/4 threads
  • Needle: household machine size 11 or 14
  • Overlock Width: left needle, 6 mm; right needle, 4 mm; rolled hem, 2 mm
  • Stitch Length: 1 - 4 mm (standard: 2.5 mm); rolled hem, 1.0 - 1.5 mm
  • Differential Feed: 0.7 : 2.0 ratio
  • Tension: industrial type dial / 1 rotation
  • Built-In Rolled Hemming: right (narrow) or left (wide) needle / 2 or 3 thread
  • Flatlock: right (narrow) or left (wide) needle / 2 or 3 thread
  • Universal Presser Foot: tape, ribbon, narrow elastic application
  • Presser Foot Lift: 5 mm
  • Dimensions: 270 mm (w) x 295 mm (h) x 345 mm (d)
  • Weight: 7.0 kg (15 lbs)

Included Accessories
  • Warranty Card
  • Instruction book
  • Parts manual
  • Accessory pack

Comparisons

Juki Pearl MO654DE has automatic self-threading lower looper, adaptor for converting to 2 thread for finer roll hems/flatlock stitching/decorative stitching, and the safety feature of machine not being able to run the machine unless all the doors are closed. So, fingers can't be in the loopers underneath. Otherwise same as Juki 644D which is without the above features. The Juki MO-654DE Overlock/Serger is essentially the same machine as the new Bernina 800DL with lay in tensions and lower looper threader and older Bernette Funlock 007D and 004D all made by Juki in the same factories as the Juki MO600 Series. We prefer the round tension knobs on the Juki brand because they are closer to the needles and loopers, and threads stay in tension longer on the round knobs. Juki is the world's largest manufacturor of industrial sewing machines and sergers. They make Juki and Bernina sergers as well as Singer's top of the line computer sewing and embroidery machines from the XL5000 down.

F.A.Q.

What is the safety feature on the Juki 654DE?
 The safety feature prevents the machine from serging until the doors are closed on the machine.

What types of feet are available?
 2/3 thread converter, blind stitch presser foot, beading presser foot, elasticator presser foot, piping presser foot, gathering presser foot, cording presser foot, snap-on/off presser foot replacement.

Where is the Juki 654 serger made?
 They are made in Shanghai

Which is the best type of serger to buy?

It all depends on how you would use a serger.

If you would only overcast single layers to keep them from raveling, a 3 thread serger would do like Juki MO623: http://www.sewingmachinestore.com/products/abp02533.html

If you seam knits, a 4 thread mock safety stitch is best Like Juki 654DE:
http://www.sewingmachinestore.com/products/abp02506.html

If you seam wovens, the best stitch is a 5 thread safety stitch like Juki 655:
http://www.sewingmachinestore.com/products/abp02531.html

All sergers do roll hems and differential feed, so the difference is how many threads you might use.

Some sergers even have the coverhem stitch with 2 or 3 straight stitches on top and a serger stitch on bottom. Juki has the best of all in the new MO735.

Comments & Reviews

Micaela, New York
I love my Juki serger. The bonus extras - case, thread, needles, presser feet - made it the best value I found during extensive research on the internet, in stores and in talking to seasoned sewers. The customer service was very helpful with talking me through the trouble I had getting stàrted. Replies to questions were prompt and thorough. After a few emails from the company's president and serger teacher and my stitches are beautiful. The illustrations in the video and manual helped make threading quick and easy to learn.

Karen C, Fremont CA
I did a lot of research on the Juki serger before I decided to purchase with your company. This serger is incredibly easy to use and feels of high quality. The availability and pricing of this unit is outstanding from your company and would definitely purchase from your site again. Thanks!

AllBrands.com is an independent dealer not associated with Bernina or Bernette.