Product Description




7.5' Drapery Hose is not for garments which use 5.5' Hoses. The longer drapery hose is not as efficient in steam production required for taking wrinkles out of garments.

  • 6" Metal Steam Head with wooden handle attachment for durability
  • 7.5 foot Drapery hose and Extended Rod Set
  • Solid Die-cast outer Housing for Durability
  • All Brass Couplings
  • On/Off Switch
  • 1500 Watt Heating Element
  • 50/60 Hertz Electrical System
  • 304 Stainless Steel Internal Boiler Tank
  • Jiffy metal steam heads are aluminum with a wooden handle for durability.
  • The Norel plastic steam heads and handles are cooler to the touch than metal and wood.
  • Preheat and Steam Settings
  • Auto Shut-off for Safety
  • Preheat time approximately 15 minutes and produces steam within 2 minutes once at preheat temperature
  • Made in USA
  • Holds 1 gallon of water and will steam continuously for 2 hours
  • The J-4000 series has a water level sight gauge that shows the water level.

    Jiffy Steamer World Power Supply Configurations

    Jiffy Comparison Table


    Jiffy Owner's Manual

    Find more about Jiffy Repair Services
  • US Warranty 3 Year Warranty
  • Non-US Warranty: 30 days parts and labor
Specifications
Additional Information:
Please refer to the "How to Steam Guide" (.pdf) for further information on how to use your steamer.


Jiffy World Power Supply Voltage Configurations (click to enlarge)
Other Images

M_13498_j1461 New Incoloy 800 Heating Element in all J-4000 Series Jiffy Steamers

M_34523_2472 Safety Certifications

F.A.Q.

Jiffy Steamer announces new Incoloy 800 Heating Element in all J-4000 Series Jiffy Steamers

Beginning the first of April 2005, Jiffy Steamer Company began installing an Incoloy 800 heating element with individual preheat and steam thermostats that are attached to the end of the 304 grade stainless steel boiler tank in the J-4000 Pro-Line steamers. This product improvement is extremely reliable, and we believe you will appreciate the high quality of this heating system. The fusible link wire, or secondary safety feature in addition to the thermostat control, will be attached above the white preheat thermostat. This product improvement will ensure that this unit will remain the workhorse of the Jiffy Pro-Line Series and will continue to uphold the trust you have put in our company and products.

Question: How do I prevent leaking?

Answer: The steamer must be used in the vertical position only. If the hose is being held correctly and steaming and item in the vertical position, there should be no water droplets. However, as you steam towards the
lower portion of a garment, you will need to extend the hose
periodically to allow any condensation to go back down from the hose
into the steamer base. This will also keep the hose from spitting water
as well. When the head is placed in the rod set hook, be sure that the
holes are faced upward when not in use.

The steamer I ordered doesn't put out the amount of steam I expected. I have a drapery workroom and I can't use it on the table because of the water spitting. Is there a steamer that will work horizontally and vertically? I have a Reliable boiler iron and am looking for that kind of steam. Can I return this steamer and get something better? Beverly
 Jiffy Steamer is intended to be used upright so the steam can rise out of the hose. The steamer, if used horizontally will spit water out. The Jiffy also provides a continuous soft flow of steam, when being used correctly. Jiffy

Comments & Reviews

Michael, California
Thank you so much...I'm very satisfied with my new Jiffy 4000 steamer and the service that I received from AllBrands. I would not hesitate to recommend you to others.

Jiffy Steamer Company,
Please note that this is our commercial model…it takes 15 minutes to reach PREHEAT, then when you are ready to STEAM, simply move the switch to STEAM and you will have warm, moist steam in 2 minutes or less. Jiffy Steamer Company

Related Categories