 |
April 19, 2024 |
New Style Industrial DC Servo Motors
Cutsew Comparison of Clutch vs Servo Motors
New style servo motors do not come with motor belts, only for machine and table combinations where the belt length is known. You can measure the circumference of the v belt length needed with a flexible tape measure laid in the grooves between the motor pulley and the hand wheel pulley. Then order the correct length industrial sewing machine belt.
Reliable 6000SM/SYCH Needle Stop Up or Down Positioner Synchronizer for SewQuiet 6000SM Servomotor for Reliable Industrial Sewing Machine/Power Stand*
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Please note: No, our synchronizer does not work on Adler, Pfaff or Consew machines because of the difference in shaft size and diameter compared to Reliable machines we make them for. .
The SYNC synchronizer kit comes with two shoulder screws that are 7MM and 8MM diameter. The screws fit in the end of the upper shaft and hold the hub in place. Remove the existing screw and measure it to be sure of the size, before ordering motor with SYNC or SYNC by itself.
Warning: SYNC does not and will not fit on some older Consew and Singer 31-20 that it cannot be installed on.
Needle stop down is good for turning corners, Needle stop up is better for inserting and removing materials under the foot and needle. John
COMPLETE CONTROL
Pair your industrial sewing machine with the 6000SM synchronizer for precise control of your sewing operation. Will only work on industrial sewing machines that have the handwheel pinned or screwed to the main shaft. Will not work on Singer 20U type machines that have a clutch wheel which allows the handwheel to spin while winding bobbins.
SIMPLE SET-UP
Everything you need to get your synchronizer up and running is supplied in the box.
See Synchronizer on SewQuiet 6000SM Servomotor. From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice. 12-coil technology means more torque and variable speed control will suit all operator levels.
The SYNC synchronizer kit comes with two shoulder screws that are 7MM and 8MM diameter. The screws fit in the end of the upper shaft and hold the hub in place. Remove the existing screw and measure it to be sure of the size, before ordering motor with SYNC or SYNC by itself.
Warning: SYNC does not and will not fit on some older Consew and Singer 31-20 that it cannot be installed on.
Needle stop down is good for turning corners, Needle stop up is better for inserting and removing materials under the foot and needle. John
COMPLETE CONTROL
Pair your industrial sewing machine with the 6000SM synchronizer for precise control of your sewing operation. Will only work on industrial sewing machines that have the handwheel pinned or screwed to the main shaft. Will not work on Singer 20U type machines that have a clutch wheel which allows the handwheel to spin while winding bobbins.
SIMPLE SET-UP
Everything you need to get your synchronizer up and running is supplied in the box.
See Synchronizer on SewQuiet 6000SM Servomotor. From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice. 12-coil technology means more torque and variable speed control will suit all operator levels.
Non-US Warranty: 30 days parts and labor.
Specifications
The Reliable 6000SMSYNCH allows you to stop the needle in various set positions.The 6000SMSYNCH synchronizer is ideal for turning corner stitching or any other applications that require up or down needle positioning.
*Attention Consew Owners!Just a word of caution regarding our synchronizer and the Consew model sewing machines. Our synchronizer comes with 2 size of mounting screws, 7mm & 8mm.
The diameter of the shaft of the hand wheel of the Consew models have changed over the years so it is best to ask the Consew customers of the diameter of the shaft of their machine to make sure that either the 7MM or the 8mm screw will fit. Reliable Note on Consews: Please remove the screw on the hand wheel and measure the diameter of it.
If the diameter is either 7 mm or 8 mm then our synchronizer will fit. If not, it won't fit.
*Unfortunately Consew over the years have changed the diameter of that particular screw size and we would not know which size you have.
The Sync. is not compatible with the Adler 167GK-373
SYNCHRONIZER INSTALLATION INSTRUCTIONS
Sew Quiet instruction booklet.
The inside diameter of the sync. is 22mm.
The ID of the hib is 15mm
The bolts are 7 and 8 mm dia.
Rex RX-400W Electronic DC Servo Motor 110V Replace Clutch Motors on Industrial Sewing Machine Stands for Better Speed Control, More Torque, Less Noise
 37592: Rex RX-400W Electronic DC Servo Motor 110V Replace Clutch Motors on Industrial Sewing Machine Stands for Better Speed Control, More Torque, Less Noise |
Our Price: $129.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Lower consumption of energy with higher output.
- Energy savings between 65-90% when compared to the clutch motor.
- Super high torque, up to 2.7NM, can drive heavy-duty industrial and commercial sewing machines.
- Motor stops immediately on pedal release with counter-clockwise break force.
- Less noise: 35 decibels, much quieter than a clutch motor!
- Less heat: less than 10 degrees centigrade means more comfortable working conditions.
- Less vibration: under .7mm/S2
- Adjustable for clockwise or counter-clockwise operation
- Automatic overload protection
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Consew CSM550-1/220 volt DC Servo Induction Motor for Sewing Machines, 3/4HP, 550W, up to 3450RPM Max, 220V Single Phase
 |
Our Price: $159.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Features of the NEW Consew CSM550-1/220 volt, 550 Watt Electronic DC Servo Induction Motor
- Energy efficient circuitry saves electricity costs
- Quiet operation, silent when in stopped position
- Uses the same mounting holes as a clutch motor
- High Torque D.C. Electronic Servo Motor
- Switch, Cord and Plug included
- Easy to adjust speed with the Control Knob
- Reversible with Switch
- No clutch or brake disc required
- Lightweight: 15.5 lbs. (17 lbs. shipping weight)
- Belt guard, pulley and mounting hardware included
- 110V light adapter
- Vibration Free operation
- Replaces traditional less efficient clutch motors for Saving Energy and therefore costs.
Consew CSM 550-01 Rotary Dial Servo Motor Product Brochure(.PDF)
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Specifications for the NEW Consew CSM550-1/220 volt, 550 Watt Electronic DC Servo Induction Motor-
Model: CSM550-1/220 volt
-
Power: 550 Watts
- 3⁄4 Horsepower
-
Volts: 220 V
-
Amps: 5 A.
-
Freq: 60 Hz
-
Phase: Single
- RPM: 0-3600
Consew CSM550-1 DC Servo Induction Motor for Industrial Sewing Machines, 3/4HP, 550W, up to 3450RPM Variable Speed Limit, 110 volt
 Consew CSM550-1 DC Servo Induction Motor for Industrial Sewing Machines, 3/4HP, 550W, up to 3450RPM Variable Speed Limit, 110 volt |
Our Price: $169.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Features of the NEW Consew CSM550-1, 550 Watt Electronic DC Servo Induction Motor
- Energy efficient circuitry saves electricity costs
- Quiet operation, silent when in stopped position
- Uses the same mounting holes as a clutch motor
- High Torque D.C. Electronic Servo Motor
- Switch, Cord and Plug included
- Easy to adjust speed with the Control Knob
- Reversible with Switch
- No clutch or brake disc required
- Lightweight: 15.5 lbs. (17 lbs. shipping weight)
- Belt guard, pulley and mounting hardware included
- 110V light adapter
- Vibration Free operation
- Also available in 220V (Model CSM550-1/220V)
- Replaces traditional less efficient clutch motors for Saving Energy and therefore costs.
Consew CSM 550-01 Rotary Dial Servo Motor Product Brochure(.PDF)
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Specifications for the NEW Consew CSM550-1, 550 Watt Electronic DC Servo Induction Motor-
Model: CSM550-1
-
Power: 550 Watts
- 3⁄4 Horsepower
-
Volts: 110 V
-
Amps: 5 A.
-
Freq: 60 Hz
-
Phase: Single
- RPM: 0-3600
Techsew SR Speed Reducer Slows Down Handwheel RPM and SPM Stitches Per Minute on Industrial Sewing Machines with Clutch Motors
 39722: Techsew 2700 Speed Reducer Slows Down RPM on Industrial Sewing Machines |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
- 2" and 6" pulley
- New speed reducer- greatly reduces the sewing speed of most industrial sewing machines
- To be installed under sewing machine table, between machine handwheel and motor pulley
- Adds torque and allows you to gear down sewing speed to 1/3 of your machine's rated speed
- Requires installation and local V-belts - may require increasing size of belt slot in table
- Includes speed reducer, and mounting screws
Non-US Warranty: 30 days parts and labor.
Specifications
Adds torque and allows you to gear down sewing speed from 1/3 of your machine's rated speed2" and 6" pulley
May require increasing size of belt slot in table Includes speed reducer, and mounting screws
V belts not included
Note: If you are considering a servo motor replacement for clutch motor to get better control over speed, remember that the slower the speed on the servo motors the less torque you get. It is to be considered when dealing with long arms and some walking foot machines depending on the density of the materials being sewn. Joe
Consew CSM1000 Servo Induction Motor 110V3/4HP 550W 4200RPM, Optional CSM1001 w/$50 Needle Position Synchronizer for Industrial Sewing Machines/Tables
 65514: Consew CSM1000 Servo Induction Motor 110V3/4HP 550W 4200RPM, Optional CSM1001 w/$50 Needle Position Synchronizer for Industrial Sewing Machines/Tables |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
"The CSM1001 should work on all 206RB machines regardless of whether they were made in Japan or China. On some of the older models, the synchronizer will not go directly on the hand wheel. The customer will have to use an adapter that comes with the motor and threads in to the shaft of the machine." Consew
Needle stop down is good for turning corners, Needle stop up is better for inserting and removing materials under the foot and needle.
You can’t add a synchronizer to the CSM1000 to give it needle positioning. You have to select the CSM1001 model motor option which comes with the synchronizer and is programmed for needle positioning
The CSM1000 series of High Torque D.C. Electronic Servo Motors from Premier by Consew includes a number of models.
The CSM1000 is a 3/4 HP (550 Watt) Brushless Servo Motor. Energy Efficient – Saves up to 70% Electricity. Speed: 0–4,200 RPM.
The CSM1001 is a 3/4 HP (550 Watt) Brushless Servo Motor that includes the Needle Positioner (synchronizer)
• No Noise when machine is not running
• No Vibration when machine is not running
• Draws Minimal Electricity when machine is not running
• Uses the same mounting holes as a clutch motor
• Easy to adjust speed & motor direction with buttons
• No clutch disc
• Adjustable belt tightener
• Belt guard, pulley & mounting hardware included
• Light weight Approx. 10 - 12 lbs (5 kgs)
• Starts-up at low speed
• Works well on heavy duty machines
• Models ending in "01" include the Needle Positioner (synchronizer)
(-01 models will run with or without the synchronizer)
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
SEWLINE SLS-2000 Sewing Machine Servo Motor Info and Demo.I recently installed a Sewline SLS-2000 Servo Motor with needle positioner on my Consew 226 and thought I'd post some info on this motor since I couldn't find much when I looked. I'm very happy with it and all its functions and power.
Needle stop down is good for turning corners, Needle stop up is better for inserting and removing materials under the foot and needle.
You can’t add a synchronizer to the CSM1000 to give it needle positioning. You have to select the CSM1001 model motor option which comes with the synchronizer and is programmed for needle positioning
The CSM1000 series of High Torque D.C. Electronic Servo Motors from Premier by Consew includes a number of models.
The CSM1000 is a 3/4 HP (550 Watt) Brushless Servo Motor. Energy Efficient – Saves up to 70% Electricity. Speed: 0–4,200 RPM.
The CSM1001 is a 3/4 HP (550 Watt) Brushless Servo Motor that includes the Needle Positioner (synchronizer)
• No Noise when machine is not running
• No Vibration when machine is not running
• Draws Minimal Electricity when machine is not running
• Uses the same mounting holes as a clutch motor
• Easy to adjust speed & motor direction with buttons
• No clutch disc
• Adjustable belt tightener
• Belt guard, pulley & mounting hardware included
• Light weight Approx. 10 - 12 lbs (5 kgs)
• Starts-up at low speed
• Works well on heavy duty machines
• Models ending in "01" include the Needle Positioner (synchronizer)
(-01 models will run with or without the synchronizer)
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
SEWLINE SLS-2000 Sewing Machine Servo Motor Info and Demo.I recently installed a Sewline SLS-2000 Servo Motor with needle positioner on my Consew 226 and thought I'd post some info on this motor since I couldn't find much when I looked. I'm very happy with it and all its functions and power.
Extended US Warranty: 1 Year Defects in Materials and Workmanship 90 Days Labor
Non-US Warranty: 30 days parts and labor.
Specifications
Generally, we recommend buying a 40V (40 inch v belt) with the CSM1000 on a 206RB-5 machine. ConsewInstruction page on CON-SERV Servo Motor Model CSM1000
Consew CSM2000 Servo Induction Motor 3/4HP550W 4200RPM 220V Optional CSM2001 Model +Needle Position Synchronizer $50 Industrial Sewing Machines/Tables
65514: Consew CSM2000 Servo Induction Motor 3/4HP550W 4200RPM 220V Optional CSM2001 Model +Needle Position Synchronizer $50 Industrial Sewing Machines/Tables |
Our Price: $169.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
"The CSM2000/1 should work on all 206RB machines regardless of whether they were made in Japan or China. On some of the older models, the synchronizer will not go directly on the hand wheel. The customer will have to use an adapter that comes with the motor and threads in to the shaft of the machine." Consew
Needle stop down is good for turning corners, Needle stop up is better for inserting and removing materials under the foot and needle.
You can’t add a synchronizer to the CSM2000 to give it needle positioning. You have to select the CSM2001 model motor option which comes with the synchronizer and is programmed for needle positioning
Other Models 110V Available
The CSM1000 series of High Torque D.C. Electronic Servo Motors from Premier by Consew includes a number of models.
The CSM1000 is a 3/4 HP (550 Watt) Brushless Servo Motor. Energy Efficient – Saves up to 70% Electricity. Speed: 0–4,200 RPM.
The CSM1001 is a 3/4 HP (550 Watt) Brushless Servo Motor that includes the Needle Positioner (synchronizer)
• No Noise when machine is not running
• No Vibration when machine is not running
• Draws Minimal Electricity when machine is not running
• Uses the same mounting holes as a clutch motor
• Easy to adjust speed & motor direction with buttons
• No clutch disc
• Adjustable belt tightener
• Belt guard, pulley & mounting hardware included
• Light weight Approx. 10 - 12 lbs (5 kgs)
• Starts-up at low speed
• Works well on heavy duty machines
• Models ending in "01" include the Needle Positioner (synchronizer)
(-01 models will run with or without the synchronizer)
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
SEWLINE SLS-2000 Sewing Machine Servo Motor Info and Demo.I recently installed a Sewline SLS-2000 Servo Motor with needle positioner on my Consew 226 and thought I'd post some info on this motor since I couldn't find much when I looked. I'm very happy with it and all its functions and power.
Needle stop down is good for turning corners, Needle stop up is better for inserting and removing materials under the foot and needle.
You can’t add a synchronizer to the CSM2000 to give it needle positioning. You have to select the CSM2001 model motor option which comes with the synchronizer and is programmed for needle positioning
Other Models 110V Available
The CSM1000 series of High Torque D.C. Electronic Servo Motors from Premier by Consew includes a number of models.
The CSM1000 is a 3/4 HP (550 Watt) Brushless Servo Motor. Energy Efficient – Saves up to 70% Electricity. Speed: 0–4,200 RPM.
The CSM1001 is a 3/4 HP (550 Watt) Brushless Servo Motor that includes the Needle Positioner (synchronizer)
• No Noise when machine is not running
• No Vibration when machine is not running
• Draws Minimal Electricity when machine is not running
• Uses the same mounting holes as a clutch motor
• Easy to adjust speed & motor direction with buttons
• No clutch disc
• Adjustable belt tightener
• Belt guard, pulley & mounting hardware included
• Light weight Approx. 10 - 12 lbs (5 kgs)
• Starts-up at low speed
• Works well on heavy duty machines
• Models ending in "01" include the Needle Positioner (synchronizer)
(-01 models will run with or without the synchronizer)
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
SEWLINE SLS-2000 Sewing Machine Servo Motor Info and Demo.I recently installed a Sewline SLS-2000 Servo Motor with needle positioner on my Consew 226 and thought I'd post some info on this motor since I couldn't find much when I looked. I'm very happy with it and all its functions and power.
Extended US Warranty: 1 Year Defects in Materials and Workmanship 90 Days Labor
Non-US Warranty: 30 days parts and labor.
Yamata FESM550N 3/4HP Variable Speed Servo Motor, Quiet Clutchless Brushless for Industrial Sewing Machine Tables, 15mm Shaft, Max 200-3750RPM,
 11456: Yamata FESM550N 3/4HP Variable Speed Servo Motor, Quiet Clutchless, Brushless |
Our Price: $189.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
There are many configurations of existing clutch motor installations. Some modifications may need to be made to mount the new motor and line up the motor pulley with hand wheel.
The only 550 Watts 3/4 HP Electronic Servo Motor in the market. The FESM-550C/N is quiet, powerful and energy saving. Features an easy to use speed adjustment knob and AMCO shaft, it is perfect for use from High Speed sewing machines to Low Speed Walking Foot machines.
The only 550 Watts 3/4 HP Electronic Servo Motor in the market. The FESM-550C/N is quiet, powerful and energy saving. Features an easy to use speed adjustment knob and AMCO shaft, it is perfect for use from High Speed sewing machines to Low Speed Walking Foot machines.
- LED Powered On/Off Switch
- High Torque D.C. Electronic Servo Motor
- Replacement for standard clutch motors
- Variable Speed with connection to your stand pedal
- Doesn't run unless stand pedal is depressed so is ULTRA QUIET
- The motor is direct, strong and quiet. Comes complete with mounting hardware
- AMCO style shaft for easy pulley exchange
- Easy to use speed adjustment knob
Extended US Warranty: 1 year replacement on defective or missing parts.
Non-US Warranty: 30 days parts and labor.
Specifications
3/4 Horsepower DC110 Volt AC Power Cord
550 Watts (Only One In Market)
0 to 3300 RPM 2 in 1 Motor (High/Low Speed)
FESM-400N (400W) - FESM-550N (550W)
Family Electronic Servo Motor
Watts: FESM-400N - 400 Watts
Watts: FESM-550N - 550 Watts
Power: 110V Single Phase
Rotation: Bi-directional (Through switch)
RPM: 0-3450 RPM
Description: High Torque D.C. Compact Electronic Servo Direct Motor
Adjustment: Easy to ajust FINE TUNE speed adustment dial
Light Socket, Energy Saving, High Torque, Quiet
Shaft: AMCO Shaft - Weight: Approximately 28 Lbs
Available in 400Watts and 550Watts - Compact Design with high torque and low noise.
Changing a Clutch Motor to a Servo Motor. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
Feiyue FESM-550N Electronic Brushless DC Servo Induction Motor and Switch for Sewing Machine Power Stands
Feiyue FESM-550N Electronic Brushless DC Servo Induction Motor for Sewing Machine Power Stands |
Our Price: $179.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Features of the NEW Feiyue FESM-550N , 550 Watt Electronic DC Servo Induction Motor
• Energy efficient circuitry saves electricity costs
• Quiet operation, silent when in stopped position
• Uses the same mounting holes as a clutch motor
• High Torque D.C. Electronic Servo Motor
• Switch, Cord and Plug included
• Easy to adjust speed with the Control Knob
• Reversible with Switch
• No clutch or brake disc required
• Lightweight: 15.5 lbs. (17 lbs. shipping weight)
• Belt guard, pulley and mounting hardware included
• 110V light adapter
• Vibration Free operation
• Also available in 220V (Model CSM550-1/220V)
• Replaces traditional less efficient clutch motors for Saving Energy and therefore costs.
FEATURES of the OLD Feiyue FESM-550 DC Servo Motor, No Longer Available.
• Energy efficient circuitry saves electricity costs
• Quiet operation, silent when in stopped position
• Uses the same mounting holes as a clutch motor
• High Torque D.C. Electronic Servo Motor
• Switch, Cord and Plug included
• Easy to adjust speed with the Control Knob
• Reversible with Switch
• No clutch or brake disc required
• Amco ¾” motor shaft standard
• Lightweight: 30 lbs.
• Belt guard included
• Built-in 6V light socket
• Vibration absorbing rubber motor mounts
• Also available in 220V
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor. The model featured is a HO HSING MJ Series
• Energy efficient circuitry saves electricity costs
• Quiet operation, silent when in stopped position
• Uses the same mounting holes as a clutch motor
• High Torque D.C. Electronic Servo Motor
• Switch, Cord and Plug included
• Easy to adjust speed with the Control Knob
• Reversible with Switch
• No clutch or brake disc required
• Lightweight: 15.5 lbs. (17 lbs. shipping weight)
• Belt guard, pulley and mounting hardware included
• 110V light adapter
• Vibration Free operation
• Also available in 220V (Model CSM550-1/220V)
• Replaces traditional less efficient clutch motors for Saving Energy and therefore costs.
FEATURES of the OLD Feiyue FESM-550 DC Servo Motor, No Longer Available.
• Energy efficient circuitry saves electricity costs
• Quiet operation, silent when in stopped position
• Uses the same mounting holes as a clutch motor
• High Torque D.C. Electronic Servo Motor
• Switch, Cord and Plug included
• Easy to adjust speed with the Control Knob
• Reversible with Switch
• No clutch or brake disc required
• Amco ¾” motor shaft standard
• Lightweight: 30 lbs.
• Belt guard included
• Built-in 6V light socket
• Vibration absorbing rubber motor mounts
• Also available in 220V
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor. The model featured is a HO HSING MJ Series
Non-US Warranty: 30 days parts and labor.
Specifications
Specifications for the NEW Feiyue FESM-550N , 550 Watt Electronic DC Servo Induction MotorMODEL: CSM550-1
POWER: 550 Watts
-3⁄4 Horsepower
VOLTS: 110 V
AMPS: 5 A.
FREQ: 60 Hz
PHASE: SINGLE
RPM: 0-3600
Specifications for the OLD Tacsew FESM-550 DC Servo Motor, No Longer Available.
Voltage (motor) 110 v
Amps / Watts (motor) 550: 550 W / 400: 400 W
Motor Speed (motor) 0 - 3450 RPM
Phase (motor) 1 - phase
Horsepower (motor) Model 550: 3/4HP, Model 400: 1/2 HP
Motor Type Servo
Tacsew FESM-550N : 550 Watts, ¾ Horsepower, 110 V., 1-Phase
Feiyue S20 LockSMITH Longarm Quilting Mach, Phoenix Frame, Built in Bobbin Winder, iPad App, Oil Reservoir, Direct Drive Motor, Auto Needle Positioner
 Feiyue S20 LockSMITH Longarm Quilting Mach, Phoenix Frame, Built in Bobbin Winder, iPad App, Oil Reservoir, Direct Drive Motor, Auto Needle Positioner |
Our Price: $4,999.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Family Sew LockSMITH S20 is an 18" x 8" Long-arm quilting machine. The machine can be set up as a 5' , 10' , or 12' depending on your needs and well the space you have available! Decades ago, we set out to create a sewing machine that would inspire a new generation to fall in love with fabric and thread. We’re proud to introduce the S20 LockSMITH. It is the most advanced, user-friendly sewing machine we have ever built. With its large quilting space and adjustable handle bars, you can sew longer and better than ever before. Its 3000 SPM production speed lets you conquer any fabric or any challenge. If you’re ready for more from your sewing machine, then it’s time for an S20 LockSMITH.
Built in Bobbin Winder
LockSmith Long Arm offers a built-in bobbin winder that winds while you quilt, so your next bobbin is always full and ready. It also features the largest available bobbin capacity, the M-size bobbin.
iPad App (Auto Stitch)
Connect your LockSmith to your iPad (iOS version 9.0 or higher) wirelessly through Bluetooth technology and download the app on the app store to access all the controls and features of your machine.
Oil Reservoir
LockSmith Long Arm requires little maintenance. The oil is self-contained so you no longer have to worry about oil on your quilts or oiling the hook with every bobbin change.
Direct Drive Motor
LockSmith Long Arm provides a more responsive and accurate stitch with less wear on the internal parts of your machine thanks to the all new direct drive motor.
Curved Handlebars
LockSmith Long Arm has Curved front and rear curved handlebars allowing for easy movement of the machine and help to ease tension and tired muscles, making quilting easier.
Auto Needle Positioner
LockSmith Long Arm has the ability to stop in the needle up or needle down position, minimizing bent or broken needles and allowing free movement of the machine.
Built in Bobbin Winder
LockSmith Long Arm offers a built-in bobbin winder that winds while you quilt, so your next bobbin is always full and ready. It also features the largest available bobbin capacity, the M-size bobbin.
iPad App (Auto Stitch)
Connect your LockSmith to your iPad (iOS version 9.0 or higher) wirelessly through Bluetooth technology and download the app on the app store to access all the controls and features of your machine.
Oil Reservoir
LockSmith Long Arm requires little maintenance. The oil is self-contained so you no longer have to worry about oil on your quilts or oiling the hook with every bobbin change.
Direct Drive Motor
LockSmith Long Arm provides a more responsive and accurate stitch with less wear on the internal parts of your machine thanks to the all new direct drive motor.
Curved Handlebars
LockSmith Long Arm has Curved front and rear curved handlebars allowing for easy movement of the machine and help to ease tension and tired muscles, making quilting easier.
Auto Needle Positioner
LockSmith Long Arm has the ability to stop in the needle up or needle down position, minimizing bent or broken needles and allowing free movement of the machine.
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Machine Weight 47 pounds
- Throat Space 18" x 8"
- Actual Quilting Area 15"
- Hook Position Finger
- Centralized Lubrication System
- One Button Operation
- Hopping Foot
- Two-station Needle Positioner w/ Single Stitch
- Ergonomically Designed Handles
- Automatic Hook Lubrication
- Oil Impregnated Bushings
- Specially Designed Vertical Wheels
- Gear / Shaft Power Transfer Gear Driven
- Cast Aluminum Molded Sewing Head
- Double-Capacity "M" Style Bobbin
- Turbo Servo Motor
- Built in Bobbin Winder
- Heavy-duty Top Shaft Bearings and Bushings
- Stitching Speed 3,000 SPM
- State-of-the-art Stitch Regulation Standard / Auto Stitch
- Idle Stitch
- Variable Speed Control
- Built in Diagnostics
Goldstar GBSM-550 Digital Quiet Clutchless Brushless DC Servo Motor for Industrial Table Model Sewing Machines
 41850: Goldstar GBSM-550 Digital Quiet Clutchless Brushless DC Servo Motor |
Our Price: $199.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The GOLDSTAR Brushless Servo Motor is designed to meet almost all basic heavy duty and continuous use requirements of various industrial sewing machines. The motor produces almost no noise, saves energy and is brushless, speed adjustable and durable. It provides a high starting torque even at low speed or from a complete stop.
The GOLDSTAR Brushless Servo Motor uses the same mounting holes as standard clutch motors.
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor. The model featured is a HO HSING MJ Series
The GOLDSTAR Brushless Servo Motor uses the same mounting holes as standard clutch motors.
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor. The model featured is a HO HSING MJ Series
Non-US Warranty: 30 days parts and labor.
Specifications
- High Torque D.C. Electronic Servo Motor
- Energy Efficient- saves up to 70% Electricity
- Easy to adjust speed and reverse motor direction with buttons
- Uses same mounting holes as a clutch motor.
- Switch with light socket and wire included
- No Carbon Brushes Needed
- No Clutch Disc
- Adjustable Belt Tightener
- Belt Guard, Pulley and Mounting Hardware Included
- Light Weight - 10 lbs
- Starts up at low speed
- Works Great with Heavy Duty Machines.
- Vibration Free, Conserves Energy and Silent When Not Running.
- Power: 110V Single Phase
- Rotation: Bi-directional (Through Digital Input)
- RPM: 0-4800 RPM
- AMCO Shaft
- On/Off Power switch on unit
- Electronic Speed Input
- Weight: 10lbs.
The new Gold Start Brushless Servo Motors is to replace or Install on Industrial Sewing machine power stand. It does not came with Table or Foot control.
The speed control is a dial set up on Electronic Box.
Reliable SewQuiet 6000SM Variable Speed Control DC Servo Motor Brushless, 550 Watts, 12 Coil Torque, 110 or 220V Single Phase, On Off & Reverse Switch
 Reliable SewQuiet 6000SM Variable Speed DC Servo Motor 110V |
Our Price: $219.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Please note: No, our synchronizer does not work on Adler, Pfaff or Consew machines because of the difference in shaft size and diameter compared to Reliable machines we make them for. .
Beauty and Brawn
The SewQuiet 6000SM brushless DC servomotor is a modern-day marvel of ingenuity and technology, crafted and designed to exceed your expectations. This is the only servomotor to incorporate a full 12-coil (vs. 6 or 9) design. This provides unparalleled power and torque, the kind of torque that’s needed to work with the toughest materials. And for those looking to add a synchronizer to your motor, it’s now available as a low cost stand-alone option.
Calibrated Control
The SewQuiet 6000SM represents the fourth generation of Reliable’s energy saving servomotor innovation. Precision step-by step stitching for detailed sewing, the ability to plug in a grounded light directly to the rear of the motor, UL/CSA certified electrical components and the total silence that gives the SewQuiet its name… the new 6000SM takes everything we’ve learned about motors over the past 60 years to new heights.
Main Features
• 550W power
• More torque than conventional clutch or servomotors
• Up to 75% energy savings
• Digital speed control
• Clockwise pully rotation (and counterclockwise directions for serger and blind stitch machines)
• Built-in overload protection
• Instruction manual with speed settings included
Includes one 60mm installed pulley
*This is a breakthrough in servomotor technology, the first 12-coil design, the torque is so strong you can't hold the pulley with your hand (more torque even then a clutch motor).
Reliable Newest Model 6000SM Motors are now shipping, 550 Watts, 3/4HP Motor Brushless, No Clutch, Dial RPM Speed Control, Reverse, 2 Overload Fuses, Auxillary Power Outlet
"Step Stitch will give you the stitch by stitch speed control you need. The servo motor variable speed is affected by the torque of the machine mechanics and materials being sewn more than just the torque of the motor. Some machines will have better variable speed control than others depending on the torque of the machine (how easy it is to turn the hand wheel over materials being used). The speed control dial is digital, and cannot be preset to exact stitches per minute, only RPM because of the differences in machines and materials." John Douthat, Owner and Tech
You can set the speed on these motors from 100 rpm up to 3800 rpm in 100 rpm increments.
*Exclusive Electronic Controlled "Step Stitch" Function allows for one stitch at a time sewing by leather workers or anyone who needs stitch by stitch control for small items and turning corners.
More torque at 600W than conventional clutch or servomotors at 400-550W, replacement, for existing clutch motors with no speed control, or undependable dc motors, Up to 75% energy savings!
NO CLUTCH, NO BRUSHES, NO PROBLEM: The SewQuiet 6000SM brushless DC servomotor is designed to operate all light to heavy-duty industrial sewing machines.
The brushless DC servomotor design which has very good torque even at low speeds; uses a laser sensor instead of a traditional mechanical clutch. This design gives the operator a graded acceleration compared to the abrupt type of acceleration common with a clutch motor.
QUIET AND CONTROLLED: With the SewQuiet 6000SM, the noise that is normally associated with sewing motors (clutch and servo) is almost entirely eliminated, creating a more pleasant work environment.
Whether you are an advanced sewer or a beginner, the SewQuiet 6000SM's microprocessor controller gives the user an unparalleled connection to the sewing machine, allowing for speed or detailed work. A "stepping" speed can be achieved which allows for literally, a step by step control of the sewing speed. This makes sewing detailed work much easier.
From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice.
SIMPLE SET-UP
Everything you need to get your Sewquiet up and running is supplied in the box.
Reliable 6000SM Information Sheet (.PDF)
Reliable 6000SM Instruction Manual with Listing of Error Codes (.PDF)
"Installed Sew Quiet on Tacsew 226RB. Seems like unlimited power. I had to turn it down to about 25% to slow it down. It still had tons of torque" 600W vs 400W Clutch, No Belt.
-Seth, AllBrands Mechanic
Roots
Reliable has lived and breathed every aspect of sewing machines since Milton Kahn started the business more than 5 decades ago. Quality control, expert service and advice are just a few of the things that make Reliable the leading commercial sewing and garment care manufacturer in North America.
Sewing machines may not have changed much in the last 25 years, but the motors that drive them have changed dramatically. The Sewquiet 6000SM is a new generation of clutch free motors, with more torque, yet perfectly silent when sitting idle.
Beauty and Brawn
The SewQuiet 6000SM brushless DC servomotor is a modern-day marvel of ingenuity and technology, crafted and designed to exceed your expectations. This is the only servomotor to incorporate a full 12-coil (vs. 6 or 9) design. This provides unparalleled power and torque, the kind of torque that’s needed to work with the toughest materials. And for those looking to add a synchronizer to your motor, it’s now available as a low cost stand-alone option.
Calibrated Control
The SewQuiet 6000SM represents the fourth generation of Reliable’s energy saving servomotor innovation. Precision step-by step stitching for detailed sewing, the ability to plug in a grounded light directly to the rear of the motor, UL/CSA certified electrical components and the total silence that gives the SewQuiet its name… the new 6000SM takes everything we’ve learned about motors over the past 60 years to new heights.
Main Features
• 550W power
• More torque than conventional clutch or servomotors
• Up to 75% energy savings
• Digital speed control
• Clockwise pully rotation (and counterclockwise directions for serger and blind stitch machines)
• Built-in overload protection
• Instruction manual with speed settings included
Includes one 60mm installed pulley
*This is a breakthrough in servomotor technology, the first 12-coil design, the torque is so strong you can't hold the pulley with your hand (more torque even then a clutch motor).
Reliable Newest Model 6000SM Motors are now shipping, 550 Watts, 3/4HP Motor Brushless, No Clutch, Dial RPM Speed Control, Reverse, 2 Overload Fuses, Auxillary Power Outlet
"Step Stitch will give you the stitch by stitch speed control you need. The servo motor variable speed is affected by the torque of the machine mechanics and materials being sewn more than just the torque of the motor. Some machines will have better variable speed control than others depending on the torque of the machine (how easy it is to turn the hand wheel over materials being used). The speed control dial is digital, and cannot be preset to exact stitches per minute, only RPM because of the differences in machines and materials." John Douthat, Owner and Tech
Other Features
You can set the speed on these motors from 100 rpm up to 3800 rpm in 100 rpm increments.
*Exclusive Electronic Controlled "Step Stitch" Function allows for one stitch at a time sewing by leather workers or anyone who needs stitch by stitch control for small items and turning corners.
More torque at 600W than conventional clutch or servomotors at 400-550W, replacement, for existing clutch motors with no speed control, or undependable dc motors, Up to 75% energy savings!
NO CLUTCH, NO BRUSHES, NO PROBLEM: The SewQuiet 6000SM brushless DC servomotor is designed to operate all light to heavy-duty industrial sewing machines.
The brushless DC servomotor design which has very good torque even at low speeds; uses a laser sensor instead of a traditional mechanical clutch. This design gives the operator a graded acceleration compared to the abrupt type of acceleration common with a clutch motor.
QUIET AND CONTROLLED: With the SewQuiet 6000SM, the noise that is normally associated with sewing motors (clutch and servo) is almost entirely eliminated, creating a more pleasant work environment.
Whether you are an advanced sewer or a beginner, the SewQuiet 6000SM's microprocessor controller gives the user an unparalleled connection to the sewing machine, allowing for speed or detailed work. A "stepping" speed can be achieved which allows for literally, a step by step control of the sewing speed. This makes sewing detailed work much easier.
From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice.
SIMPLE SET-UP
Everything you need to get your Sewquiet up and running is supplied in the box.
Reliable 6000SM Information Sheet (.PDF)
Reliable 6000SM Instruction Manual with Listing of Error Codes (.PDF)
"Installed Sew Quiet on Tacsew 226RB. Seems like unlimited power. I had to turn it down to about 25% to slow it down. It still had tons of torque" 600W vs 400W Clutch, No Belt.
-Seth, AllBrands Mechanic
Roots
Reliable has lived and breathed every aspect of sewing machines since Milton Kahn started the business more than 5 decades ago. Quality control, expert service and advice are just a few of the things that make Reliable the leading commercial sewing and garment care manufacturer in North America.
Sewing machines may not have changed much in the last 25 years, but the motors that drive them have changed dramatically. The Sewquiet 6000SM is a new generation of clutch free motors, with more torque, yet perfectly silent when sitting idle.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- The optional Synchronizer will not fit on the Consew 206RB machine.
- Comes in 110v or 220v Standard US Voltage
- 220V Can be special ordered.
- 600W, 3/4 horsepower vs competition's 400W clutch motor or 400-550 conventional dc servo motors
- More torque than conventional 400W clutch or underpowered servomotors
- Up to 75% energy savings
- Digital speed control limiter
- Regular and reverse motor shaft turning directions
- Fused overload protection (Electrical - 120V)
- H.P. - 3/4
- Power - 550-600W
- Power Consumption - 4.5 amps
- Speed Control - Digital
- Pulley Type - Aluminum
- Pulley Size - 60mm
- On-Off Switch - Built-in
- Accessories - Treadle rod mounting hardware, belt guard
- Dimensions - 9.75" x 9" x 6"
- Weight - Net - 7.8 lb - 3.5 kg
- Shipping Dimensions - 13.2" x 11.4" x 8"
- Shipping Weight - 10 lb - 4.5 kg
- Manufacturer's Warranty - Limited 1 year
SewQuiet 6000SM Servomotor. From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice. 12-coil technology means more torque and variable speed control will suit all operator levels.
Consew 206RB Owners!Just a word of caution regarding our optional synchronizer and the Consew model sewing machines. Our synchronizer comes with 2 size of mounting screws, 7mm & 8mm.
The diameter of the shaft of the hand wheel of the Consew models have changed over the years so it is best to ask the Consew customers of the diameter of the shaft of their machine to make sure that either the 7MM or the 8mm screw will fit. Reliable
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
Sew Quiet instruction booklet.
Optional SYNCHRONIZER INSTALLATION INSTRUCTIONS
Reliable SewQuiet 6000SM Variable Speed DC Servo Motor 110V, Step Stitch, 12 Coils, More Torque,Replaces SQ5000, Includes SYCH Needle Stop Positioner*
62972: Reliable SewQuiet 6000SM Variable Speed DC Servo Motor +SYCH Positioner* |
Our Price: $219.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
ETA 3rd week of September 2022,Not Compatible with Pfaff machinesPlease note: No, our synchronizer does not work on Adler, Pfaff or some Consew machines because of the difference in shaft size and diameter compared to Reliable machines we make them for. .
"I installed the 6000sm today. It does exactly what i need it to do. I did set the speed to maximum at 1700. Plenty fast enough for me. The slow speed control is phenomenal! Installation was super simple.
I was able to use the same belt. I love it when a plan comes together!" Gregg G. Baton Rouge 2/21/20.
The SYNC synchronizer kit comes with two shoulder screws that are 7MM and 8MM diameter. The screws fit in the end of the upper shaft and hold the hub in place. Remove the existing screw and measure it to be sure of the size, before ordering motor with SYNC or SYNC by itself. SYNC does not fit on some older Consew and Singer that it cannot be installed on.
Needle stop down is good for turning corners, Needle stop up is better for inserting and removing materials under the foot and needle.
*Pair your 6000SM servo motor with SYCH needle stop position synchronizer for precise control of your sewing operation. SYCH will not fit the some models of older Consew (see below) and Singer (31-20)
Motor is Brushless, Clutchless, with 60mm Pulley, 12 Coil Motor, and Light Plug In Receptacle The 12 coils feature offers more torque and is just as easy or easier to control versus the 9 coils motors.
Beauty and Brawn
The SewQuiet 6000SM brushless DC servomotor is a modern-day marvel of ingenuity and technology, crafted and designed to exceed your expectations. This is the only servomotor to incorporate a full 12-coil (vs. 6 or 9) design. This provides unparalleled power and torque, the kind of torque that’s needed to work with the toughest materials. And for those looking to add a synchronizer to your motor, it’s now available as a low cost stand-alone option.
Calibrated Control
The SewQuiet 6000SM represents the fourth generation of Reliable’s energy saving servomotor innovation. Precision step-by step stitching for detailed sewing, the ability to plug in a grounded light directly to the rear of the motor, UL/CSA certified electrical components and the total silence that gives the SewQuiet its name… the new 6000SM takes everything we’ve learned about motors over the past 60 years to new heights.
Main Features
• 550W power
• More torque than conventional clutch or servomotors
• Up to 75% energy savings
• Digital speed control
• Clockwise and counterclockwise directions
• Built-in overload protection
• Instruction manual with speed settings included
Includes one 60mm installed pulley
This is a breakthrough in servomotor technology, the first 12-coil design, the torque is so strong you can't hold the pulley with your hand (more torque even then a clutch motor).
Reliable Newest Model 6000SM Motors are now shipping, 550 Watts, 3/4HP Motor Brushless, No Clutch, Dial RPM Speed Control, Reverse, 2 Overload Fuses, Auxillary Power Outlet
"Step Stitch will give you the stitch by stitch speed control you need. The servo motor variable speed is affected by the torque of the machine mechanics and materials being sewn more than just the torque of the motor. Some machines will have better variable speed control than others depending on the torque of the machine (how easy it is to turn the hand wheel over materials being used). The speed control dial is digital, and cannot be preset to exact stitches per minute, only RPM because of the differences in machines and materials." John Douthat, Owner and Tech
Other Features
You can set the speed on these motors from 100 rpm up to 3800 rpm in 100 rpm increments.
*Exclusive Electronic Controlled "Step Stitch" Function allows for one stitch at a time sewing by leather workers or anyone who needs stitch by stitch control for small items and turning corners.
More torque at 600W than conventional clutch or servomotors at 400-550W, replacement, for existing clutch motors with no speed control, or undependable dc motors, Up to 75% energy savings!
NO CLUTCH, NO BRUSHES, NO PROBLEM: The SewQuiet 6000SM brushless DC servomotor is designed to operate all light to heavy-duty industrial sewing machines.
The brushless DC servomotor design which has very good torque even at low speeds; uses a laser sensor instead of a traditional mechanical clutch. This design gives the operator a graded acceleration compared to the abrupt type of acceleration common with a clutch motor.
QUIET AND CONTROLLED: With the SewQuiet 6000SM, the noise that is normally associated with sewing motors (clutch and servo) is almost entirely eliminated, creating a more pleasant work environment.
Whether you are an advanced sewer or a beginner, the SewQuiet 6000SM's microprocessor controller gives the user an unparalleled connection to the sewing machine, allowing for speed or detailed work. A "stepping" speed can be achieved which allows for literally, a step by step control of the sewing speed. This makes sewing detailed work much easier.
From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice.
SIMPLE SET-UP
Everything you need to get your Sewquiet up and running is supplied in the box.
Reliable Warranty Information (.PDF)
Reliable 6000SM Information Sheet (.PDF)
Reliable 6000SM Information Sheet and Listing of Error Codes (.PDF)
"Installed Sew Quiet on Tacsew 226RB. Seems like unlimited power. I had to turn it down to about 25% to slow it down. It still had tons of torque" 600W vs 400W Clutch, No Belt. Seth, AllBrands Mechanic
Roots
Reliable has lived and breathed every aspect of sewing machines since Milton Kahn started the business more than 5 decades ago. Quality control, expert service and advice are just a few of the things that make Reliable the leading commercial sewing and garment care manufacturer in North America.
Sewing machines may not have changed much in the last 25 years, but the motors that drive them have changed dramatically. The Sewquiet 6000SM is a new generation of clutch free motors, with more torque, yet perfectly silent when sitting idle.
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
SEWLINE SLS-2000 Sewing Machine Servo Motor Info and Demo.I recently installed a Sewline SLS-2000 Servo Motor with needle positioner on my Consew 226 and thought I'd post some info on this motor since I couldn't find much when I looked. I'm very happy with it and all its functions and power.
"I installed the 6000sm today. It does exactly what i need it to do. I did set the speed to maximum at 1700. Plenty fast enough for me. The slow speed control is phenomenal! Installation was super simple.
I was able to use the same belt. I love it when a plan comes together!" Gregg G. Baton Rouge 2/21/20.
The SYNC synchronizer kit comes with two shoulder screws that are 7MM and 8MM diameter. The screws fit in the end of the upper shaft and hold the hub in place. Remove the existing screw and measure it to be sure of the size, before ordering motor with SYNC or SYNC by itself. SYNC does not fit on some older Consew and Singer that it cannot be installed on.
Needle stop down is good for turning corners, Needle stop up is better for inserting and removing materials under the foot and needle.
*Pair your 6000SM servo motor with SYCH needle stop position synchronizer for precise control of your sewing operation. SYCH will not fit the some models of older Consew (see below) and Singer (31-20)
Motor is Brushless, Clutchless, with 60mm Pulley, 12 Coil Motor, and Light Plug In Receptacle The 12 coils feature offers more torque and is just as easy or easier to control versus the 9 coils motors.
Beauty and Brawn
The SewQuiet 6000SM brushless DC servomotor is a modern-day marvel of ingenuity and technology, crafted and designed to exceed your expectations. This is the only servomotor to incorporate a full 12-coil (vs. 6 or 9) design. This provides unparalleled power and torque, the kind of torque that’s needed to work with the toughest materials. And for those looking to add a synchronizer to your motor, it’s now available as a low cost stand-alone option.
Calibrated Control
The SewQuiet 6000SM represents the fourth generation of Reliable’s energy saving servomotor innovation. Precision step-by step stitching for detailed sewing, the ability to plug in a grounded light directly to the rear of the motor, UL/CSA certified electrical components and the total silence that gives the SewQuiet its name… the new 6000SM takes everything we’ve learned about motors over the past 60 years to new heights.
Main Features
• 550W power
• More torque than conventional clutch or servomotors
• Up to 75% energy savings
• Digital speed control
• Clockwise and counterclockwise directions
• Built-in overload protection
• Instruction manual with speed settings included
Includes one 60mm installed pulley
This is a breakthrough in servomotor technology, the first 12-coil design, the torque is so strong you can't hold the pulley with your hand (more torque even then a clutch motor).
Reliable Newest Model 6000SM Motors are now shipping, 550 Watts, 3/4HP Motor Brushless, No Clutch, Dial RPM Speed Control, Reverse, 2 Overload Fuses, Auxillary Power Outlet
"Step Stitch will give you the stitch by stitch speed control you need. The servo motor variable speed is affected by the torque of the machine mechanics and materials being sewn more than just the torque of the motor. Some machines will have better variable speed control than others depending on the torque of the machine (how easy it is to turn the hand wheel over materials being used). The speed control dial is digital, and cannot be preset to exact stitches per minute, only RPM because of the differences in machines and materials." John Douthat, Owner and Tech
Other Features
You can set the speed on these motors from 100 rpm up to 3800 rpm in 100 rpm increments.
*Exclusive Electronic Controlled "Step Stitch" Function allows for one stitch at a time sewing by leather workers or anyone who needs stitch by stitch control for small items and turning corners.
More torque at 600W than conventional clutch or servomotors at 400-550W, replacement, for existing clutch motors with no speed control, or undependable dc motors, Up to 75% energy savings!
NO CLUTCH, NO BRUSHES, NO PROBLEM: The SewQuiet 6000SM brushless DC servomotor is designed to operate all light to heavy-duty industrial sewing machines.
The brushless DC servomotor design which has very good torque even at low speeds; uses a laser sensor instead of a traditional mechanical clutch. This design gives the operator a graded acceleration compared to the abrupt type of acceleration common with a clutch motor.
QUIET AND CONTROLLED: With the SewQuiet 6000SM, the noise that is normally associated with sewing motors (clutch and servo) is almost entirely eliminated, creating a more pleasant work environment.
Whether you are an advanced sewer or a beginner, the SewQuiet 6000SM's microprocessor controller gives the user an unparalleled connection to the sewing machine, allowing for speed or detailed work. A "stepping" speed can be achieved which allows for literally, a step by step control of the sewing speed. This makes sewing detailed work much easier.
From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice.
SIMPLE SET-UP
Everything you need to get your Sewquiet up and running is supplied in the box.
Reliable Warranty Information (.PDF)
Reliable 6000SM Information Sheet (.PDF)
Reliable 6000SM Information Sheet and Listing of Error Codes (.PDF)
"Installed Sew Quiet on Tacsew 226RB. Seems like unlimited power. I had to turn it down to about 25% to slow it down. It still had tons of torque" 600W vs 400W Clutch, No Belt. Seth, AllBrands Mechanic
Roots
Reliable has lived and breathed every aspect of sewing machines since Milton Kahn started the business more than 5 decades ago. Quality control, expert service and advice are just a few of the things that make Reliable the leading commercial sewing and garment care manufacturer in North America.
Sewing machines may not have changed much in the last 25 years, but the motors that drive them have changed dramatically. The Sewquiet 6000SM is a new generation of clutch free motors, with more torque, yet perfectly silent when sitting idle.
Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
SEWLINE SLS-2000 Sewing Machine Servo Motor Info and Demo.I recently installed a Sewline SLS-2000 Servo Motor with needle positioner on my Consew 226 and thought I'd post some info on this motor since I couldn't find much when I looked. I'm very happy with it and all its functions and power.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Comes in 110v Standard US Voltage or 220V
- 600W, 3/4 horsepower vs competition's 400W clutch motor or 400-550 conventional dc servo motors
- More torque than conventional 400W clutch or underpowered servomotors
- Up to 75% energy savings
- Digital speed control limiter
- Regular and reverse motor shaft turning directions
- Fused overload protection (2)
SewQuiet 6000SM Servomotor. From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice. 12-coil technology means more torque and variable speed control will suit all operator levels.
*Attention Consew Owners!Just a word of caution regarding our synchronizer and the Consew model sewing machines. Our synchronizer comes with 2 size of mounting screws, 7mm & 8mm.
The diameter of the shaft of the hand wheel of the Consew models have changed over the years so it is best to ask the Consew customers of the diameter of the shaft of their machine to make sure that either the 7MM or the 8mm screw will fit. Reliable Note on Consews: Please remove the screw on the hand wheel and measure the diameter of it.
If the diameter is either 7 mm or 8 mm then our synchronizer will fit. If not, it won't fit.
Unfortunately Consew over the years have changed the diameter of that particular screw size and we would not know which size you have.
SYNCHRONIZER INSTALLATION INSTRUCTIONS
Sew Quiet instruction booklet.
The inside diameter of the sync. is 22mm.
The ID of the hib is 15mm
The bolts are 7 and 8 mm dia.
Reliable 2000FR Cordless 14.8V Battery Operated Rechargeable Fabric/Cloth Cutting Machine, DC Motor, 4" Rotary Blade Cuts 1" Height, 5 Speeds, 2Hrs
 Reliable 2000FR 14.8V Cordless 14.8V Battery Operated Rechargeable Fabrics and Cloth Cutting Machine, DC Servo Motor Cuts up to 1" High, 5 Speeds, 2Hr |
Our Price: $279.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Cordless control. The 2000FR’s battery operated powerful servomotor can cut up to a single ply of fabric right up to 1” high, making it a very versatile, lightweight machine. With 5 speed settings, the 2000FR is perfect for sample making or other light-duty operations.
The 2000FR includes two 14.8V lithium batteries and a charger with an optimal 2 hour run time between charging. The 200OFR’s 4.3” high speed steel (HSS) blade is optimal for cutting. With an extra thin base plate and light design, the 2000FR is a pleasure to operate.
The 2000FR includes two 14.8V lithium batteries and a charger with an optimal 2 hour run time between charging. The 200OFR’s 4.3” high speed steel (HSS) blade is optimal for cutting. With an extra thin base plate and light design, the 2000FR is a pleasure to operate.
- Everything Included
- Powerful Servomotor
- Automatic Sharpener
- 14.8V Power
- Cutting capacity 1"
- Extra Thin Base Plate
- Front Blade Safety Guard adjusts to fabric thickness being cut
Non-US Warranty: 30 days parts and labor.
Specifications
ELECTRICAL: 120V - Two 14.8V Lithium Ion BatteriesBLADE SPEED: 5 Speed Settings: 600/800/1000/1200/1400 RPM
CUTTING CAPACITY: 1” 2.5 cm
SHARPENING MECHANISM: Single stone – spring loaded
RUN TIME: 2 Hours
LUBRICATION: Manual
NET WEIGHT: 6.1 lb / 2.8 kg
SHIPPING WEIGHT: 7.85 lb / 2.1 kg
PRODUCT DIMENSIONS: 10” x 4” x 10” / 25.5 x 10 x 25.5 cm
SHIPPING DIMENSIONS: 13.5” x 10.5” x 7.25” / 34 x 26.5 x 18.5 cm
COUNTRY OF ORIGIN: China
WARRANTY: Limited 1 Year
Juki Unassembled Sewing Machine Table, Stand, J7R Servo Motor, 110V or 220V, Reverse Motor Switch for Industrial Sewing Machines.
 8321: Juki Unassembled Industrial Sewing Machine Table, Stand, 1/2HP Power Servo Motor, 110V or 220V, Reverse Motor Switch* |
Our Price: $329.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
These Clutch otor to clockwise or counterclockwise direction for hand wheel rotation. Clockwise is used for blindstitch and serger machines. Counter Clockwise is for All others including straight stitch, zigzag and upholstery)
- Heavy duty adjustable legs
- Durable formica tops for long service and lasting beauty
- Color available: Tan
- Cutout available for most industrial machines
- Stand includes: motor, steel driver, treadle and base, treadle rod, treadle extension,
- These stands do not include: drip pan, knee lifter, thread stand, light, bobbin winder, belt or hinges. These items should be included with the machine head.
125 lbs
Dimensions 48x48x30"
Country of Origin Canada
Ships from NJ
Freight cost $195
$75 additional for "residential" delivery - i.e., you don't have a loading dock or fork lift
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Please review our Freight LTL Shipping PoliciesShips Ground Freight only.
Juki Unassembled Wood Table Top 20x48" & Adjustable Height Metal Stand Only for Juki DDL-6 DDL-7 Industrial Sewing Machine Heads with Motor and Panel
 Industrial Sewing Machine Wood Table Top and Metal Stand without Motor and Panel for Juki-7 Heads, |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Opening size is standard 18.74 x 7" or 7x18-25/32 for Juki DDL sewing machines with or without oil pans.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Superior SV-71 E-Z Servo Motor Brushless, Needle Position Sychronizer 110 or 220V , 90mm Pulley, Replaces Clutch Motors on Industrial Sewing Machines
 The SV-71-110V Servo Motor for Industrial Sewing Machines is more energy efficient than a clutch motor! |
Our Price: $349.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The SV-71-110V Servo Motor for Industrial Sewing Machines is more energy efficient than a clutch motor!
Changing a Clutch Motor to a Servo Motor. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
Changing a Clutch Motor to a Servo Motor. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.
Non-US Warranty: 30 days parts and labor.
Consew KD Unassembled Table, Stand, Variable Speed DC Servo Motor for Industrial Sewing Machine Heads. Specify Brand and Model Number of Your Machine
 86039: Consew KD Table, Stand, Variable Speed Servo Motor/Industrial Sewing Machines |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Heavy duty adjustable K legs
- Durable formica tops for long service and lasting beauty
- Color available: Tan
- Cutout available for most industrial machines
- Stand includes: motor, treadle pedal and base, treadle rod, treadle extension, gooseneck light, on and off switch.
- These stands do not include: drip pan, knee lifter, thread stand, bobbin winder, belt or hinges.
These items are included with the machine head
- Dimensions: 48” length x 20” width x 30” height when set up
Consew Sewing Machine Table Assembly Demonstration
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.Ricoma Unassembled Table Top TT-20U, Stand and Servo Motor for FY20U43 or Singer 20U Industrial Zigzag Sewing Machines and Clones
 79532: Ricoma Unassembled Table Top TT-20U, Stand and Servo Motor for FY20U43 or Singer 20U Industrial Zigzag Sewing Machines and Clones |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Ricoma Unassembled Table Top TT-20U, Stand and Servo Motor for FY20U43 or Singer 20U Industrial Zigzag Sewing Machines and Clones
Non-US Warranty: 30 days parts and labor.
Juki Unassembled Fully Submerged Overlock Serger Table Top, Stand, J7R Servo Motor
 9074: Juki Unassembled Fully Submerged Overlock Serger Table Top, Stand, J7R Servo Motor |
Our Price: $329.99 Prices are subject to change, and only current prices will be honored. Availability: Please contact us for availability. Condition: New In Box |
Features
* Synchrony Bank 6 Months 0% No Interest Financing. Equal Monthly Pay plus any applicable taxes. Apply online. Transaction Code 106 Synchrony will advise you of your maximum amount or full credit that you can use towards purchase.
Note: Picture shows serger in the table, but the machine is not included. You can specify which overlock serger brand and model number you have, but it still may require your adjustments to the table, platform, stand, motor to flush mount machine in the well before using..
Note: Picture shows serger in the table, but the machine is not included. You can specify which overlock serger brand and model number you have, but it still may require your adjustments to the table, platform, stand, motor to flush mount machine in the well before using..
- Fully submerged table (20" x 48") and K-leg stand, plus 1/2h.p. motor included
- Heavy duty adjustable K legs
- Shipped fully assembled
- Durable Formica tops for long service and lasting beauty
- Color available: Tan
- Cutout available for most industrial machines
- 1/2 HP high speed (3,450 r.p.m) and 110 or 220 volt set ups.
- Stand include:motor,servo,steel driver,treadle and base,treadle rod,treadle extension,switch
- These stands do not include: drip pan,knee lifter,thread stand,bobbin winder,belt or hinges.These items are included with the machine head
Non-US Warranty: 30 days parts and labor.
Specifications
Please review our Freight LTL shipping PoliciesConsew Space Saver Pedestal Like Table, Stand, Legs, Servo Motor 110V for Your Cylinder Bed Arm, Machine Head Not Included, No Premade Cut Outs on Top
 101628: Consew Space Saver Table, Stand, Legs, Servo Motor 110V for Cylinder Bed Arm, Feed Off the Arm, and Shoe Patch Industrial Sewing Machines |
Our Price: $649.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Please note that if you order the stand without a machine, the table top will come completely blank and the customer will be responsible for cutting the belt slot, motor holes, and other holes for the machine that they choose to put on it.
- New style! Replaces the older model of space saver table
- Heavy duty adjustable H legs
- Durable formica tops for long service and lasting beauty
- Table top comes blank
- Stand includes: motor, treadle pedal and base, treadle rod, treadle extension, on and off switch.
- These stands do not include: drip pan, knee lifter, thread stand, bobbin winder, belt or hinges. These items should be included with your machine head
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.Juki DDL-8700 Straight Stitch Industrial Sewing Machine, Power Stand 5500SPM Servo Motor, 11"Arm, 1/2"Foot LIft, 5mm Stitch Length, Bonus 100 Needles
 2513: Juki DDL8700 Straight Lockstitch Industrial Sewing Machine, Servo Motor Power Stand |
Our Price: $829.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
11" Arm Space from Needle right to Neck, up to 5500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
- Servo Motor
- Single Needle Lockstitch
- Uses Organ DBx1 Needles same as 16x231
- Up To 5500 Stitches Per Minute
- Fully Automatic Lubrication
- 1/2 Inch Foot Lift By Knee Lever
- 1/4 Inch Foot Lift by Hand Lever
- Maximum 5mm Stitch Length at the longest stitch length setting
- Minimum 6 Stitches Per Inch at the longest stitch length setting.
- Includes Table, Stand, And 1/2hp Motor
- Industrial Sewing Machine for apparel/interior fabrics, not upholstery
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Instruction Book Operating Manual for Juki DDL-8700 Sewing MachineClick HERE for Parts List Manual for Juki DDL-8700 Sewing Machine
- Up to 5500 stitches per minute
- Identical to and replaces DDL-8500 models
- Replaces popular DDL-MS and DDL-888 models, but has more speed
- Single-needle
- Lockstitch
- Maximum foot lift: 13 mm
- Maximum stitch length: 5 mm
- Maximum stitches: 6 stitches per inch.
- Needles: 9-18 DBX1 (16x231) up to size 19
- Sewing Speed max.: 5,500 spm
- Stitch Length max.: 5 mm
- Presser Foot Lift by hand, max.: 5.5 mm; by knee, max. 13 mm
- Needle Bar Stroke 30.7 mm
- Hook: auto-lubricating full rotary hook
- Bedsize 7x18-25/32"
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DDL-8100E Economy Straight Lockstitch Industrial Sewing Machine, Power Stand, Servo Motor, 11" Arm, 1/4-1/2in Foot LIft, 5mm Stitch Length
 Juki DDL-8100 Straight Lockstitch Industrial Sewing Machine/Power Stand, Servo Motor. 4500SPM |
Our Price: $799.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Same as old style DDL8500 DDL8700 w/o any extra accessories other than what is on the machine (bobbin, needle, foot), Includes Power Stand 4500SPM, 11" Arm Space to Right of Needle, 6mm/1/2" Presser Foot LIft, 5mm Stitch Length, 6SPI
The difference is the DDL8100 was built as an economy machine. It was released in Asia and in South America first to compete with lower priced machines from other manufacturers. It is lower speed, not meant for factory applications. It also comes with absolutely no accessories. No extra needles, no extra bobbins, no screwdrivers or other tools. It is a bare bones machine. Juki
11" Arm Space from Needle right to Neck, up to 4500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
The difference is the DDL8100 was built as an economy machine. It was released in Asia and in South America first to compete with lower priced machines from other manufacturers. It is lower speed, not meant for factory applications. It also comes with absolutely no accessories. No extra needles, no extra bobbins, no screwdrivers or other tools. It is a bare bones machine. Juki
11" Arm Space from Needle right to Neck, up to 4500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
- Single Needle Lockstitch
- Uses Organ DBx1 Needles same as 16x231
- Up To 4500 Stitches Per Minute
- Fully Automatic Lubrication
- 1/2 Inch Foot Lift By Knee Lever
- 1/4 Inch Foot Lift by Hand Lever
- Maximum 5mm Stitch Length at the longest stitch length setting
- Minimum 6 Stitches Per Inch at the longest stitch length setting.
- Includes Table, Stand, And 1/2hp Motor
- Industrial Sewing Machine for apparel/interior fabrics, not upholstery
Applications:
• For sewing light to medium-weight materials including
cotton, knits, polyester, nylon, sheer fabrics and denim.
• Suitable for stitching such products as blouses, shirts,
men's, ladies and children's apparel, uniforms, overalls,
lingerie, etc.
Features:
• Sewing mechanism that demonstrates outstanding responsiveness to materials to be sewn.
By thoroughly investigating and modifying the sewing mechanisms in order to achieve low-tension sewing, the machine flexibly responds to various kinds of materials and produces beautiful seams of consistent quality.
• The machine has been designed for reduced vibration and noise and upgraded reliability and durability.
By adopting a machine frame structure designed to obtain optimal balance and upgrade strength and rigidity, the machine runs with reduced vibration and noise.
• The machine has easy-to-operate functions to achieve improved operability.
By providing a presser foot with a higher lift (13mm), a light-touch stitch dial, and other easy-to-operate functions, the burden on the operator is lightened, and productivity is further increased.
The hand pulley has been designed to contain a deep recess to allow the operator to hold the pulley firmly and turn it with ease.
• The machine provided as standard with attachment mounting seats.
The machine is provided as standard with extra attachment mounting seats for attachment of new auxiliary parts in the future. The extremely high durability of the seats ensures an extended service with frequent replacement of attachments.
• The location of the hinge to prevent the sewing material from being caught by the hinge.
The hinge is located as such so as to prevent the material from being caught by it, thereby improving workability.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Instruction Book Operating Manual for Juki DDL-8000 Series Sewing MachinesClick HERE for Parts List Manual for Juki DDL-8000 Series Sewing Machine
- Up to 4500 stitches per minute
- Identical to and replaces DDL-8500 and 8300 models
- Replaces popular DDL-MS and DDL-888 models, but has more speed
- Single-needle
- Lockstitch
- Maximum foot lift: 13 mm
- Maximum stitch length: 5 mm
- Maximum stitches: 6 stitches per inch.
- Needles: 9-18 DBX1 (16x231) up to size 19
- Sewing Speed max.: 4,500 spm
- Stitch Length max.: 5 mm
- Presser Foot Lift by hand, max.: 5.5 mm; by knee, max. 13 mm
- Needle Bar Stroke 30.7 mm
- Hook: auto-lubricating full rotary hook
- Bedsize 7x18-25/32"
Juki DDL-8100e
Speed, Max (S.P.M.) : 4500*
Clearance Under Foot : (5.5 by hand, 13mm by knee)
Needle Bar Stroke : (30.7mm)
Stitch Length, Max. : (5mm)
Needle : DB x 1 (16 x 257) (16 x 230 for leather)
Feed dog : 3-Row
Bobbin - Metal
Hook : Auto-lubricating full-rotary hook
Bed Size : 7" x 18 25/32"
Workspace: 10 1/4"
How to assemble a Juki DDL 8100e industrial sewing machine onto the bench correctly. This video explains how to assemble the Juki 8100e into the bench including bobbin winder, belt guards, setting the knee lift mechanism and sorting out the oil in the oil sump. When we send out our machines we place them on a pallet so this should help any of our customers or other buyers to set up their new or second hand straight stitch machines to get them ready for sewing.Some Items may be different depending on country.
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Gemsy Jiasew CS737D 3 Thread Serger, Direct Drive Built In Servo Motor, KD Submerged Table Top H-Leg Stand, 4mm Stitch Width, 5mm Foot Lift, 650W 110V
 7672: Jiasew Gemsy CS 737F 3 Thread Industrial Serger Overlock Machine/Stand |
Our Price: $749.99 Prices are subject to change, and only current prices will be honored. Availability: ON BACKORDER Condition: New In Box |
Features
There is a 110V 50-60HZ 550W 200-6000rpm Energy Saving Servo Motor inside the CS-737D machine body, all motor control parts are packed inside one carton with the machine, size 47x33x48cm, gross weight 34.4kgs for machine head only. .
- Suitable for overlocking and overedging workpieces of light and medium-weight materials.
- Low sewing tension,neat and beautiful stitch even running with high speed.
- Auto lubricated and excellent performance.
- Applicable to the overedging operation of light and medium materical,moderate,due to its automatic lubricating device,its operates perfectly and smoothly at low sewing tension
- This series of overlock sewing machines is a basic type of overlock machine that concentrates on the basic range of functions. The machines in this series offer better productivity and stable sewing finishes at maximum sewing speeds of 7500 spm. The various parts of the this series of machines have been optimized and standardized to produce a line-up of economical and efficient machines with superlative cost performance
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
Model: GEM737F
-
No.of needles: 1
-
No.of threads: 3
-
Needle gauge: NA
-
Stitch width: 4mm
-
Stitch length: 3.6mm
-
Differential ratio: 0.7-2x
-
Height of presser foot: 5.5mm
-
Needle: DCx27 Sizes #11 to #18, #14 Recommended
-
Motor: 3450 r.p.m. clutch motor
-
Sewing speed: up to 7500 s.p.m. stitches per minute
-
Measurments: 465x323x470mm
- Weight: 33/36kg
Jiasew 747F 2 Needle 3-4 Thread Industrial Overlock Serger Machine, Top Mount Unassembled Table, H Legs Stand, 650W Servo Motor up to 7500SPM
 7675: Jiasew 747F 2 Needle 3-4 Thread Industrial Overlock Serger Machine, Top Mount Unassembled Table, H Legs Stand, 650W Servo Motor up to 7500SPM |
Our Price: $799.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
- Suitable for overlocking and overedging workpieces of light and medium-weight materials.
- Low sewing tension,neat and beautiful stitch even running with high speed.
- Auto lubricated and excellent performance.
- Applicable to the overedging operation of light and medium materical,moderate,due to its automatic lubricating device,its operates perfectly and smoothly at low sewing tension
- This series of overlock sewing machines is a basic type of overlock machine that concentrates on the basic range of functions. The machines in this series offer better productivity and stable sewing finishes at maximum sewing speeds of 7500 spm. The various parts of the this series of machines have been optimized and standardized to produce a line-up of economical and efficient machines with superlative cost performance
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
Model: GEM747F
-
No.of needles: 2
-
No.of threads: 4
-
Needle gauge: 2
-
Stitch width: 4mm
-
Stitch length: 3.6mm
-
Differential ratio: 0.7-2
-
Height of presser foot: 6mm
-
Needle: DCx1 #11-#18
-
Motor: 3450 r.p.m. clutch motor
-
Sewing speed: 7500 s.p.m.
-
Measurments: 465xx323x470
- Weight: 33/36kg
Juki DDL-5550N High Speed Straight Stitch Sewing Machine, 11" Arm, Auto Oil, 5mm Stitch Length, 6/13mm Foot Lift, Table Stand, Servo Motor
 17199: Juki Japan DDL5550N High Speed Straight Lock Stitch Sewing Machine, Stand, Servo Motor |
Our Price: $799.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
-
Brand: Juki
-
Application: For light-medium weight materials
-
Bed Size: 517mm x 178mm
-
Feed Dog: 3-Row
-
Hook: Automatic-lubricating full-rotary hook
-
Max. Sewing Speed: 5500spm (motor 3450RPM)
-
Max. Stitch length: 5mm
-
Thread take-up: Slide Type
- Needle System (at time of delivery): DB x 1(#14)#9
- #18 For JE:134(Nm90)
-
Lubrication: Fully automatic lubrication system by means of plunger pump
-
Lubricating Oil: Juki New Defrix Oil #2(Equivalent to ISO VG32)
-
Lift of Presser Foot by Hand: 5.5 mm
-
Lift of Presser Foot by Knee: 13 mm
-
Weight of Machine Head: 75 LBS.
-
Thread Material: Polyester
- Made In: Japan
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Please click here for DDL-5550,DDL-5530 Instruction Manual (.pdf)Download PDF on Juki DDL5550N Series
Please review our Freight LTL shipping Policies
Techsew 20U53 Straight Stitch +9mm Zigzag Home & Industrial Sewing Machine Like Singer, Consew 20u53, Pfaff 9020 +Assembled Table, Stand, Servo Motor
 96268: Techsew 20U53 Straight Stitch & 9mm Zigzag Home & Industrial Sewing Machine Same as Singer, Consew 20u53 Pfaff 9020 +Table, Stand, DC Servo Motor |
Our Price: $959.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
- The techSew20U53 is the industry standard for light to medium duty zig zag sewing. 20U53's can be found used in homes and schools, for appliqué work and in industrial applications. Also used for sewing canvas, cloth, lace, leather, and vinyls.
- All of the convenience features are standard to make your job easier: reverse feed, built in bobbin winder, and belt guard.
- Sews Zig Zag and Straight Stitch
- Reverse
- ZigZag width and stitch length adjustment
- Includes complete table, adjustable speed 550W Servo motor, thread stand, lamp, bobbin winder, tools
- Includes Limited Lifetime Warranty and free technical support for the life of your machine
- Machine comes inspected, oiled, adjusted and READY TO SEW
Ships Pre-Assembled!
Click here to view this machine's manual (.pdf)
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Techsew 20U53 Zigzag and Straight Stitch Industrial Sewing MachineThe Techsew 20U53 Zigzag Industrial Sewing Machine is designed for sewing light to medium fabrics, denim and lightweight leather.
- Maximum speed – 2,500 rpm
- Stitch length 0-5 mm
- Stitch width – maximum 9 mm
- Presser foot lift by hand 6 mm
- Knee lifter to raise foot or control zig-zag width
- Knee Lever For Presser Foot Or Zig-Zag
- Needle size 135 x 5 #9-18
- Work space 8.18” (208 mm)
- Bed size 15.72” (399 mm)
- Rotating hook – Automatic lubricated hook
- Lubrication – Manual
- North American made table and stand, plus ½ h.p. motor included.
- Single Needle Lockstitch With Reverse
- All-Metal Industrial Rotary Hook
- SS/ZZ Tailoring & Drapery Machine
- Not For Upholstery, Exterior Fabrics or Upholstery Thread
- A needle clamp screw (part #54BH) or Superior 541788 is needed for the following attachments: buttonhole foot, walking foot, and ruffler foot
- Machines of class 20U have been in production for over 20 years
- Perfect straight stitching
- Needle bar frame locking clamp engaged by a quick 1/4 turn of a knob
- Built in bobbin winder
- Hook automatically advances and retards timing according to zig zag width
- Independently adjustable forward and reverse stitch lengths
- Left, Center, Right Needle Positions
- Offers the versatility of medium speed straight stitching, zig-zag stitching, satin stitch embroidery and free-motion work
- Buttonholes produced by means of right, center, and left needle positions
- Zig zag plate, straight stitch plate, and embroidery/darning plate included
- Maximum sewing speed: 2500 SPM
- Maximum stitch length: 5mm
- Maximum stitch width: 9mm
- Presser foot clearance: 1/4" (6.4mm)
- Needle system: 135x5 (DPx5)
- Needle sizes: #14 to #18
- Thread sizes: #27 to #69
- Motor: 550W Servo motor
TECHSEW INDUSTRIAL SEWING MACHINES
Techsew Sewing Machines are built with quality control being our top priority – our machines are made with the most durable materials and set up with the end user in mind. All machines are fully inspected and tested by our certified technicians prior to shipping. We are able to prepare custom setups in order to deliver a machine that is exactly what the customer requires for their production needs.
Reliable 3500SD Straight LockStitch Sewing Machine Drop Feed, Direct Drive Built In DC Servo Motor, 4500RPM, Stand
 Reliable 3500SD Direct Drive Single Needle Sewing Machine, Stand |
Our Price: $999.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Experience the advanced sewing technology of the 3500SD. The energy-saving direct drive technology eliminates the sewing belt and provides precise and adjustable speed control with automatic needle positioning, making sewing easier for beginners and experts alike. The 3500SD’s “drop feed” sewing mechanism is designed for a wide range of light to medium-weight fabrics.
A STITCH IN THE RIGHT DIRECTION
Introducing our newest addition to the sewing machine family - the Direct Drive 3500SD. This single-needle lockstitch machine is perfect for creating fundamental stitches. As the machine sews, the top and bottom threads interlock, ensuring that they stay securely in place within the fabric.
DIRECT-DRIVE MOTOR
The 3500SD features state-of-the-art direct drive motor technology that eliminates the need for a motor belt. No belt = less noise and a smoother, quieter operation.
ENERGY EFFICIENT
Direct drive motors only operate when the foot pedal is engaged, resulting in up to 70% less energy consumption compared to clutch motors.
A HALF STITCH AT A TIME
With a simple press of a button, the 3500SD allows for index (“step”) stitching. Perform a simple half stitch for precision stitch control.
DIGITAL SPEED CONTROL
Full control is at your fingertips. Adjust the speed of the motor right at your fingertip with the built-in control panel.
NEEDLE UP OR NEEDLE DOWN
The 3500SD is equipped with a cutting-edge programmable needle positioner featuring an integrated LED light, allowing you to control the needle's stopping position effortlessly – either up or down. This innovative addition eliminates the need to interrupt your work and manually turn the handwheel. Fast and efficient.
UBERLIGHT™ FLEX LED LIGHT
The perfect add on light is included at no extra charge for the 3500SD making it both, a great sewing machine, and a great value.
SUPERIOR STAND
Others skimp on the stand components, we don’t. We use only 100% plywood in our tabletops (not cheap particle board) and our legs are made from heavy-duty 3/32" steel.
A STITCH IN THE RIGHT DIRECTION
Introducing our newest addition to the sewing machine family - the Direct Drive 3500SD. This single-needle lockstitch machine is perfect for creating fundamental stitches. As the machine sews, the top and bottom threads interlock, ensuring that they stay securely in place within the fabric.
DIRECT-DRIVE MOTOR
The 3500SD features state-of-the-art direct drive motor technology that eliminates the need for a motor belt. No belt = less noise and a smoother, quieter operation.
ENERGY EFFICIENT
Direct drive motors only operate when the foot pedal is engaged, resulting in up to 70% less energy consumption compared to clutch motors.
A HALF STITCH AT A TIME
With a simple press of a button, the 3500SD allows for index (“step”) stitching. Perform a simple half stitch for precision stitch control.
DIGITAL SPEED CONTROL
Full control is at your fingertips. Adjust the speed of the motor right at your fingertip with the built-in control panel.
NEEDLE UP OR NEEDLE DOWN
The 3500SD is equipped with a cutting-edge programmable needle positioner featuring an integrated LED light, allowing you to control the needle's stopping position effortlessly – either up or down. This innovative addition eliminates the need to interrupt your work and manually turn the handwheel. Fast and efficient.
UBERLIGHT™ FLEX LED LIGHT
The perfect add on light is included at no extra charge for the 3500SD making it both, a great sewing machine, and a great value.
SUPERIOR STAND
Others skimp on the stand components, we don’t. We use only 100% plywood in our tabletops (not cheap particle board) and our legs are made from heavy-duty 3/32" steel.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
MAXIMUM SEWING SPEED: 3700 RPMSTITCH LENGTH: 0 - 0.2” / 0-5 mm
NEEDLE BAR STROKE: 1.22” / 31 mm
NEEDLE SYSTEM #: 16 x 257/ #9-18
PRESSURE FOOT LIFT: By hand 0.2” / 5 mm; By knee 0.5” / 13 mm
BOBBIN WINDER: Yes
THREAD CUTTER: No
INDEX STITCHING: Yes
NEEDLE POSITIONER: Yes
STITCH DIAL REGULATOR: Yes
REVERSE LEVER: Yes
HOOK TYPE: Rotary
HEAD DIMENSIONS: 22” x 7” x 10” / 55.8 x 17.8 x 25.4 cm
SHIPPING DIMENSIONS: 48” x 40” x 50” / 121.9 x 101.6 x 127 cm
SHIPPING WEIGHT: 200 lbs / 90.71 kg
LUBRICATION: Automatic
COUNTRY OF ORIGIN: China
WARRANTY: Limited 1 year
Reliable 2300SZ 9mm ZigZag 6mm Straight Stitch Sewing Machine, Direct Drive, Stand, LED, Speed Control, Needle Positioner
 8619: Reliable 2300SZ Direct Drive 9mm ZigZag, 6mm Straight Stitch Sewing Machine, Stand, LED Lamp, Speed Control, Replaces 2200SZ Singer 20U73 Mechanical |
Our Price: $1,099.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval
15.75x7" Flat Bed, Assembled Power Stand, Built in Direct Drive Servo Motor, 6mm or 1/4" Hand Lever for Presser Foot, LCR Needle Positions, Bobbin Winder
*Includes Organ 135x5 100 Interchangable with Singer 20U Type Sewing Machine Needles: 1901, 1955, 135x7, 135x8, DPx5
Exact same mechanical machine as the Singer 20u73 plus electronic speed limit control and needle positioner also with 100 FREE Organ needles. You choose size. Replaces Singer 20u73, 20u53, 20u33, and 20u13 Japan Machines. The 2300SZ replaces the 2200SZ.
The 2300SZ owes its popularity to its versatility and ease of use. It will go from sewing numbers on a team jacket to producing dancewear, to making dress shirts. And because it runs at a slower speed, it will do finer detailed work.
The 2300SZ is the industry standard for light-tomedium duty zig-zag and straight sewing. 2300SZ’s
are used in homes, schools, for appliqué work, and in
industrial applications. The 2300SZ owes its popularity to its versatility and
ease of use. It will go from sewing numbers on a team
jacket, to producing dancewear, to making dress shirts.
And because it runs at a slower speed, it will do finer
detailed work.
FEATURES:
COMPLETE WITH MOTOR 120V, STAND AND LIGHT
15.75x7" Flat Bed, Assembled Power Stand, Built in Direct Drive Servo Motor, 6mm or 1/4" Hand Lever for Presser Foot, LCR Needle Positions, Bobbin Winder
*Includes Organ 135x5 100 Interchangable with Singer 20U Type Sewing Machine Needles: 1901, 1955, 135x7, 135x8, DPx5
Exact same mechanical machine as the Singer 20u73 plus electronic speed limit control and needle positioner also with 100 FREE Organ needles. You choose size. Replaces Singer 20u73, 20u53, 20u33, and 20u13 Japan Machines. The 2300SZ replaces the 2200SZ.
The 2300SZ owes its popularity to its versatility and ease of use. It will go from sewing numbers on a team jacket to producing dancewear, to making dress shirts. And because it runs at a slower speed, it will do finer detailed work.
The 2300SZ is the industry standard for light-tomedium duty zig-zag and straight sewing. 2300SZ’s
are used in homes, schools, for appliqué work, and in
industrial applications. The 2300SZ owes its popularity to its versatility and
ease of use. It will go from sewing numbers on a team
jacket, to producing dancewear, to making dress shirts.
And because it runs at a slower speed, it will do finer
detailed work.
FEATURES:
COMPLETE WITH MOTOR 120V, STAND AND LIGHT
- 2,000 RPM speed operation
- 0-5 mm stitch length
- 9 mm stitch width
- 135 x 5 needle size
- Built in LED light
- Individually sewn off and tested before shipping
Standard features include reverse feed, built-in bobbin winder, belt guard and an accessory kit with extra fittings (bobbins, feed dog, throat plate, edge guide, regular foot, zipper foot and a hemming foot).
All of the convenience features are standard to make your job easier; and of course our trusted reputation for building quality, long lasting equipment.
Best used for:
- Applique
- General zig-zag sewing
Features:
- Link-type feeding mechanismfor smooth operation
- 2,000 maximum rpm
- 0-5 mm stitch length
- 9 mm stitch width
- 135 x 5 needle size
- 8.18" work space
- 15.72" bed size
- Automatic lubricated hook
- North American made table and stand, plus 1/2h.p. motor included
- Hirose All Metal Rotary Hook Assembly, Made in Japan.
Reliable Warranty Information (.PDF)
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Ships LTL Ground freight only No Expedited Methods
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Specifications Reliable 2300SZ SINGLE NEEDLE LOCKSTITCH ZIG-ZAG, DROP FEEDSimilar Singer 20u Manual PDF for reference only
-
Model: 2300SZ
-
Electrical: 110V
-
Stitch length: 0-5 mm
-
Stitch width: 9 mm
-
Pressure foot lift: By hand 6 mm, by Knee Lift Lever 9mm
-
Needle size: 135 x 5 #9-#18
-
Work space: 8.25"
-
Bed size: 15.75"
-
Hook type: Rotary - auto lubricated
-
Lubrication: Manual
-
Dimensions - head: 10" x 22" x 19"
-
Weight - head: 55 lbs
-
Dimensions with stand: 40" x 50" x 51"
-
Shipping weight w/stand: 200 lbs
-
Warranty: RELIABLE™ 1 Year Warranty
SPECIFICATIONS:
MAXIMUM SEWING SPEED 2,000 RPM
STITCH LENGTH 0 – 0.2” 0 – 5 mm
STITCH WIDTH 0.35” 9 mm
NEEDLE BAR STROKE 1.25” 31.8 mm
PRESSURE FOOT LIFT
By hand 0.24”
By knee 0.35”
By hand 6 mm
By knee 9 mm
NEEDLE SYSTEM # 135 x 5
WORK SPACE 8.25” 20.95 cm
BED SIZE 15.75” 40 cm
HOOK TYPE Rotary – auto lubricated
LUBRICATION Manual
STITCH DIAL REGULATOR Yes
REVERSE LEVER Yes
COUNTRY OF ORIGIN China
WARRANTY Limited 1 year
Needle Bar Lock
Zigzag Memory Lock knobs
Juki DDL8700 Fully Assembled Ready To Sew Straight Stitch Sewing Machine, 7x18-25/32" Bedsize, Power Stand,11"Arm,1/2"Foot LIft,5mmSL,6SPI
 32885: Juki DDL-8700 Fully Assembled Ready To Sew Straight Stitch Sewing Machine, Stand, Servo Motor |
Our Price: $1,099.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Fully Assembled Ready to Sew! Complete with Table, Stand, 110V motor and Drawer. Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand with the oil pan installed, belt tension adjusted, belt guard installed, and sewn off, You only have to pour in the oil and set up the thread stand. It ships from Atlanta. John
11" Arm Space from Needle right to Neck, up to 5500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
11" Arm Space from Needle right to Neck, up to 5500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
- Single Needle Lockstitch
- Uses Organ DBx1 Needles same as 16x231
- Up To 5500 Stitches Per Minute
- Fully Automatic Lubrication
- 1/2 Inch Foot Lift By Knee Lever
- 1/4 Inch Foot Lift by Hand Lever
- Maximum 5mm Stitch Length at the longest stitch length setting
- Minimum 6 Stitches Per Inch at the longest stitch length setting.
- Industrial Sewing Machine for apparel and interior fabrics, not upholstery
- Includes Assembled Table, Plywood Top, Metal Stand, 1/2hp Clutch 110V Motor Installed
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Instruction Book Operating Manual for Juki DDL-8700 Sewing MachineClick HERE for Parts List Manual for Juki DDL-8700 Sewing Machine
- Up to 5500 stitches per minute
- Identical to and replaces DDL-8500 models
- Replaces popular DDL-MS and DDL-888 models, but has more speed
- Single-needle
- Lockstitch
- Maximum foot lift: 13 mm
- Maximum stitch length: 5 mm
- Maximum stitches: 6 stitches per inch.
- Needles: 9-18 DBX1 (16x231) up to size 19
- Sewing Speed max: 5,500 spm
- Stitch Length max: 5 mm
- Presser Foot Lift
-by hand, max: 5.5 mm
-by knee, max: 13 mm
- Needle Bar Stroke: 30.7 mm
- Hook: auto-lubricating full rotary hook
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DU1181N Walking Foot Top & Bottom Feed Sewing Machine Head Only, Auto Oil, Knee Lift, 15mm Foot Lift, 9mm Stitch Length, M Bobbin, No Stand/Motor
 101368: Juki DU1181N Walking Foot Top & Bottom Feed Sewing Machine Head Only |
Our Price: $1,299.95 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
ETA within 30 Days! With its powerful top and bottom feed mechanism, the machine smoothly feeds a difficult-to-feed material or a multi-layered part of material without pitch errors, achieving consistent seam quality.
Higher lift of the presser foot
The lift of the presser foot, by the knee lifter, is as high as 15 mm so as to support processes which require a higher lift of the presser foot, such as piping and tape-attaching.
The maximum stitch length is 9mm
With its stitch length being as large as 9 mm, the machine is applicable to a broader range of sewing processes.
The double-capacity hook is provided as standard
The machine comes with a horizontal-axis double capacity hook, not only to decrease the frequency of bobbin thread changing, but also to enable sewing work with increased efficiency.
Automatic lubricating mechanism
A pump-unit type automatic lubricating mechanism dramatically improves maintainability. The oil ammount in the face plate and hook is adjustable.
The top feed mechanism employs a grease tank and oil wick lubrication mechanism.
The machine acchieves low-vibrationa nd low-noise
The machine head is designed to achieve optimum balance, thereby reducing vibration and noise, The machine affords the operator a comfortable working environment.
Excellent operability
The stitch pitch can be adjusted tin both normal and reverse directions.
The height and inclination of the feed dog can be adjusted.
The amount of the alternating vertical movement of the walking foot and presser foot is adjustable in a range from 2 to 5mm according to the height of a multi-layered section of material.
Higher lift of the presser foot
The lift of the presser foot, by the knee lifter, is as high as 15 mm so as to support processes which require a higher lift of the presser foot, such as piping and tape-attaching.
The maximum stitch length is 9mm
With its stitch length being as large as 9 mm, the machine is applicable to a broader range of sewing processes.
The double-capacity hook is provided as standard
The machine comes with a horizontal-axis double capacity hook, not only to decrease the frequency of bobbin thread changing, but also to enable sewing work with increased efficiency.
Automatic lubricating mechanism
A pump-unit type automatic lubricating mechanism dramatically improves maintainability. The oil ammount in the face plate and hook is adjustable.
The top feed mechanism employs a grease tank and oil wick lubrication mechanism.
The machine acchieves low-vibrationa nd low-noise
The machine head is designed to achieve optimum balance, thereby reducing vibration and noise, The machine affords the operator a comfortable working environment.
Excellent operability
The stitch pitch can be adjusted tin both normal and reverse directions.
The height and inclination of the feed dog can be adjusted.
The amount of the alternating vertical movement of the walking foot and presser foot is adjustable in a range from 2 to 5mm according to the height of a multi-layered section of material.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki Japan webpage on DU1181N
Instruction Manual for Juki DU1181N
Parts List for Juki DU1181N
Model name DU-1181N
Max. sewing speed 2,000sti/min
Max. stitch length 9mm
Presser foot By knee: 15mm
Alternating vertical
movement 2～5mm
Needle DP×17 (#21), #14
- #23
Thread #40 - #8, B33
- B92, Nm=90/3
- 30/3
Specifications:
Max. sewing speed 2,000 stitches per minute
Max. stitch length 9mm (forward/backward)
Needle bar stroke 36.5mm
Lift of the presser foot by hand 5.5mm
Lift of the presser foot by knee 15mm
Thread take-up Link type
Alternating vertical movement 2～5mm
Hook Horizontal-axis full-rotary double-capacity hook
Needle (at the time of delivery) DP×17 (#21) #14～#23＊
Thread #40 - #8, B33
- B92, Nm=90/3
- 30/3
Pitch changing method By dial
Knee-lifter mechanism Built on the machine head
Lubrication Automatic
Lubricating oil JUKI MACHINE OIL No.7 (equivalent to ISO VG7)
Distance from needle to machine arm 261mm
Bed size 477mm × 178mm
Weight of the machine head 31kg
Please review our Freight LTL shipping Policies
Reliable 5500SD High Speed Straight Stitch Industrial Sewing Machine, Auto Trim, Back Tack, Control Panel, BuiltIn Direct Drive Servo Motor Stand, LED
 Reliable 5500SD Automatic Thread Trimmer Single Needle Lockstitch Sewing Machine w/ Direct Drive |
Our Price: $1,499.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
The 5500SD is designed to enhance productivity and flexibility. It features an automatic thread trimmer that consistently trims threads of different thicknesses. The machine also has a digital control panel that offers innovative capabilities, such as automatic backtacking, programmable stitch lengths, stitch limiting, and slow start. The 5500SD sewing machine is equipped with Direct Drive technology, eliminating the need for a belt and offering better speed control. It also positions the needle in the down or up position, saving time and making it easier for sewers to achieve professional results. This versatile machine can handle a wide range of light to medium-weight fabrics.
The Secret to Sewing Success? Automatic Thread Cutting!
Incorporate an automatic thread cutter and foot lift into your sewing, and you won't believe the results. This innovative feature streamlines the sewing process, saving both time and money for users. This accelerates production by reducing downtime and speeding up the final results. The automatic thread cutter ensures clean, uniform cuts, promoting the efficiency and professionalism of each sewing project.
THREAD TRIMMING AND AUTOMATIC FOOT LIFT
The automatic thread cutter makes removing your fabric so much faster and easier, saving you time and money. By simply pushing back on the foot pedal, the thread trimmer will engage and cut the thread. It’s that easy and that fast. You are now ready to sew your next piece.
DUAL DIRECT DRIVE MOTOR
The 5500SD uses dual motor technology, introducing the next generation in direct-drive motor performance. Traditional machines with under bed thread trimmer systems use 1 motor, direct drive or servo, for sewing, needle positioning, and thread trimming functions. Using not 1 but 2 motors, the 5500SD separates these functions for a much more efficient, quieter and smoother operation. The dual motor is key to increased efficiency, unmatched precision, and a more productive sewing experience.
A HALF STITCH AT A TIME
With a simple press of a button, the 5500SD allows for index stitching. Perform a simple stitch for precision stitch control.
PROGRAMMABLE SEWING
Full control is at your fingertips. The 5500SD is fully equipped with a variety of convenient features that are specifically designed to make your sewing experience much simpler and faster. Features like Digital Speed Control, Slow Start, Needle Positioner, Programmable Back Tacking, setting your stitch length and much much more…
NEEDLE UP OR NEEDLE DOWN
Are you tired of stopping your work to move the handwheel? The 5500SD includes a programmable needle positioner to stop the needle in the up or down position. This eliminates the need to pause your work and turn the handwheel.
UBERLIGHT™ FLEX LED LIGHT
The perfect add on light is included at no extra charge for the 5500SD making it both, a great sewing machine, and a great value.
SUPERIOR STAND
Others skimp on the stand components, we don’t. We use only 100% plywood in our tabletops (not cheap particle board) and our legs are made from heavy-duty 3/32" steel.
The Secret to Sewing Success? Automatic Thread Cutting!
Incorporate an automatic thread cutter and foot lift into your sewing, and you won't believe the results. This innovative feature streamlines the sewing process, saving both time and money for users. This accelerates production by reducing downtime and speeding up the final results. The automatic thread cutter ensures clean, uniform cuts, promoting the efficiency and professionalism of each sewing project.
THREAD TRIMMING AND AUTOMATIC FOOT LIFT
The automatic thread cutter makes removing your fabric so much faster and easier, saving you time and money. By simply pushing back on the foot pedal, the thread trimmer will engage and cut the thread. It’s that easy and that fast. You are now ready to sew your next piece.
DUAL DIRECT DRIVE MOTOR
The 5500SD uses dual motor technology, introducing the next generation in direct-drive motor performance. Traditional machines with under bed thread trimmer systems use 1 motor, direct drive or servo, for sewing, needle positioning, and thread trimming functions. Using not 1 but 2 motors, the 5500SD separates these functions for a much more efficient, quieter and smoother operation. The dual motor is key to increased efficiency, unmatched precision, and a more productive sewing experience.
A HALF STITCH AT A TIME
With a simple press of a button, the 5500SD allows for index stitching. Perform a simple stitch for precision stitch control.
PROGRAMMABLE SEWING
Full control is at your fingertips. The 5500SD is fully equipped with a variety of convenient features that are specifically designed to make your sewing experience much simpler and faster. Features like Digital Speed Control, Slow Start, Needle Positioner, Programmable Back Tacking, setting your stitch length and much much more…
NEEDLE UP OR NEEDLE DOWN
Are you tired of stopping your work to move the handwheel? The 5500SD includes a programmable needle positioner to stop the needle in the up or down position. This eliminates the need to pause your work and turn the handwheel.
UBERLIGHT™ FLEX LED LIGHT
The perfect add on light is included at no extra charge for the 5500SD making it both, a great sewing machine, and a great value.
SUPERIOR STAND
Others skimp on the stand components, we don’t. We use only 100% plywood in our tabletops (not cheap particle board) and our legs are made from heavy-duty 3/32" steel.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
MAXIMUM SEWING SPEED: 5000 RPMSTITCH LENGTH: 0 - 0.2”/0-5 mm
NEEDLE BAR STROKE: 1.22”/31 mm
NEEDLE SYSTEM #: 16 x 257/ #9-18
PRESSURE FOOT LIFT: By hand 0.2”/5mm, By knee 0.5”/13 mm
AUTOMATIC PRESSER FOOT LIFT: 0.35”/9 mm
BOBBIN WINDER: Yes
THREAD CUTTER: Yes
INDEX STITCHING: Yes
NEEDLE POSITIONER: Yes
STITCH DIAL REGULATOR: Yes
HOOK TYPE: Rotary
LUBRICATION: Automatic
HEAD DIMENSIONS: 23” x 7” x 10”/58.4 x 17.8 x 25.4 cm
SHIPPING DIMENSIONS: 48” x 40” x 50”/121.9 x 101.6 x 127 cm
SHIPPING WEIGHT: 190 lbs/86.18 kg
COUNTRY OF ORIGIN: China
WARRANTY: Limited 1 year
Jiasew GEM600B01 Cylinder Bed 2&3 Needle 1/8&1/4" Top/Bottom Cover Stitch Machine, 7mm Foot Lift, Diff Feed, KD*Power Stand, 6000SPM Servo Motor 550W
 7934: Gemsy GEM600B-01 Cylinder Bed 2&3 Needle, 1/8 & 1/4" Top & Bottom Cover Hem Stitch Interlock Machine, Unassembled Power Stand |
Our Price: $1,299.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
- Excellent automatic lubricating and filtering (interchangeable) system, ensures the max. sewing speed is up to 6,000 s.p.m..
- Micro-adjustable and lever-adjustable differential feeding ratio.
- Push-button type of stitch length regulator, easy operation.
- With needle cooling system and thread lubricating system by silicone supplying units.
- Available to combine with different kinds of attachment and automatic device.
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- MAX. SEWING SPEED : 6,000 S.P.M.
- LIFT OF PRESSER FOOT : 7.0 mm
- DIFFERENTIAL RATIO :0.5-1.3
- NEEDLE GAUGE:
2 NEEDLES : 3.2, 4.0, 4.8, 5.6, 6.4 mm
3 NEEDLES : 5.6, 6.4 mm
- STITCH LENGTH : 1.4-4.4 mm
- NEEDLE BAR STROKE : 31mm
- NEEDLE SYSTEM : UY128GAS
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DU1181N Walking Foot Top and Bottom Feed Sewing Machine, Power Stand, Servo Motor, Auto Oil, up to 15mm Foot Lift and 9mm Stitch Length, Mbobbins
10513: Juki DU1181N Walking Foot Top Bottom Feed Sewing Machine & Power Stand Servo Motor |
Our Price: $1,599.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
With its powerful top and bottom feed mechanism, the machine smoothly feeds a difficult-to-feed material or a multi-layered part of material without pitch errors, achieving consistent seam quality.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Higher lift of the presser foot
The lift of the presser foot, by the knee lifter, is as high as 15 mm so as to support processes which require a higher lift of the presser foot, such as piping and tape-attaching.
The maximum stitch length is 9mm
With its stitch length being as large as 9 mm, the machine is applicable to a broader range of sewing processes.
The double-capacity hook is provided as standard
The machine comes with a horizontal-axis double capacity hook, not only to decrease the frequency of bobbin thread changing, but also to enable sewing work with increased efficiency.
Automatic lubricating mechanism
A pump-unit type automatic lubricating mechanism dramatically improves maintainability. The oil ammount in the face plate and hook is adjustable.
The top feed mechanism employs a grease tank and oil wick lubrication mechanism.
The machine acchieves low-vibrationa nd low-noise
The machine head is designed to achieve optimum balance, thereby reducing vibration and noise, The machine affords the operator a comfortable working environment.
Excellent operability
The stitch pitch can be adjusted tin both normal and reverse directions.
The height and inclination of the feed dog can be adjusted.
The amount of the alternating vertical movement of the walking foot and presser foot is adjustable in a range from 2 to 5mm according to the height of a multi-layered section of material.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
Higher lift of the presser foot
The lift of the presser foot, by the knee lifter, is as high as 15 mm so as to support processes which require a higher lift of the presser foot, such as piping and tape-attaching.
The maximum stitch length is 9mm
With its stitch length being as large as 9 mm, the machine is applicable to a broader range of sewing processes.
The double-capacity hook is provided as standard
The machine comes with a horizontal-axis double capacity hook, not only to decrease the frequency of bobbin thread changing, but also to enable sewing work with increased efficiency.
Automatic lubricating mechanism
A pump-unit type automatic lubricating mechanism dramatically improves maintainability. The oil ammount in the face plate and hook is adjustable.
The top feed mechanism employs a grease tank and oil wick lubrication mechanism.
The machine acchieves low-vibrationa nd low-noise
The machine head is designed to achieve optimum balance, thereby reducing vibration and noise, The machine affords the operator a comfortable working environment.
Excellent operability
The stitch pitch can be adjusted tin both normal and reverse directions.
The height and inclination of the feed dog can be adjusted.
The amount of the alternating vertical movement of the walking foot and presser foot is adjustable in a range from 2 to 5mm according to the height of a multi-layered section of material.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki Japan webpage on DU1181N
Instruction Manual for Juki DU1181N
Parts List for Juki DU1181N
Model name DU-1181N
Max. sewing speed 2,000sti/min
Max. stitch length 9mm
Presser foot By knee: 15mm
Alternating vertical
movement 2～5mm
Needle DP×17 (#21), #14
- #23
Thread #40 - #8, B33
- B92, Nm=90/3
- 30/3
Specifications:
Max. sewing speed 2,000 stitches per minute
Max. stitch length 9mm (forward/backward)
Needle bar stroke 36.5mm
Lift of the presser foot by hand 5.5mm
Lift of the presser foot by knee 15mm
Thread take-up Link type
Alternating vertical movement 2～5mm
Hook Horizontal-axis full-rotary double-capacity hook
Needle (at the time of delivery) DP×17 (#21) #14～#23＊
Thread #40 - #8, B33
- B92, Nm=90/3
- 30/3
Pitch changing method By dial
Knee-lifter mechanism Built on the machine head
Lubrication Automatic
Lubricating oil JUKI MACHINE OIL No.7 (equivalent to ISO VG7)
Distance from needle to machine arm 261mm
Bed size 477mm × 178mm
Weight of the machine head 31kg
Please review our Freight LTL shipping Policies
Techsew 1460 Walking Foot Compound Needle Feed Leather Upholstery Sewing Machine, Reverse, DC Servo Motor Power Stand, Lamp (Replaces TechSew 106)
 65949: Techsew 1460 Walking Foot Needle Feed Sewing Machine, Power Stand, Lamp |
Our Price: $1,695.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
The Techsew 1460 sews light to medium-weight materials such as leather, vinyl, upholstery, synthetics, canvas and various coated and laminated products. It is designed for auto, marine and aviation upholstery, leather goods (belts, vests, leashes, saddle bags, notebook covers, chaps etc), boat covers, awnings, luggage, sports and camping equipment, canvas, orthopedics and more
- Heavy Duty
- Compound Walking Foot
- Reverse Feed
- Large Bobbin
- Large Hook
- Automatic Lubrication System
- Easily lift and lower the presser foot with a knee control.
- Extra-high presser foot lift
- Easy Adjustment of Length of Stitch (2-10mm)
- Presser foot lifts 12mm
- Sews up to 3/8" (9.5mm)
- Uses 135x17 needle system
- New 110V motor (1/2 HP, 1725 RPM)
- Includes complete table, adjustable speed servo motor, thread stand, lamp and all accessories (oil, bobbins, screwdrivers, needles, instruction manual, oil pan, and more...)
Applications:
Designed for stitching such products as auto, boat and furniture upholstery, tarpaulins, covers, sails, tents, camping trailer covers, awnings, umbrellas, tops, bags, luggage, handbags, travelware accessories, sports and camping equipment, wearing apparel, outdoor clothing, canvas shoes, slippers, orthopedic appliances etc.
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
Suggested Thread Sizes: Tex-46, 69, 90, 138, (207 needle only)Presser Foot Clearance: 1/2" (13mm)
Sewing Capacity: 3/8" (10mm)
Maximum Stitch Length: 8mm
Maximum Sewing Speed: 3000SPM
Needle Sizes: #18 to #24
Thread Sizes: #46 to 138
Techsew 550 Servo motor: 550W, 3/4HP, 12 speed settings from 0 to 3450RPM
Features:
- Compound walking-foot (alternating presser feet + needle feed + feed dog) to help feed thick & bulky materials
- Reverse Feed for reinforcing stitches
- Large extra-capacity bobbin
- Easy stitch length adjustment
- High presser foot clearance
- Automatic lubrication system
- Includes Techsew 550W adjustable speed servo motor
- Includes complete table, motor, threadstand, lamp and accessories (oil, bobbins, tools, needles, instruction manual)
- Includes Limited Lifetime Warranty and FREE technical support for the life of your machine
- Machine comes inspected, oiled, adjusted and READY TO SEW
Techsew 1460 Industrial Sewing Machine 3.5 Minute Video
Techsew SK-4 Leather Skiving Machine, Assembled Space Saver Table 33"W, Stand. 550W Servo Motor 1200RPM, Blade Sharpener, Adjustable Skiving Width 2"
 88514: Techsew SK-4 Leather Skiving Machine +Assembled Table, Stand and Servo Motor |
Our Price: $1,734.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
SK-4 will handle up to 7-8oz leather including veg tan . Unfortunately we do not have an eta on the sk-5 unit. TechSew.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
The Techsew SK-4 Leather Skiver is precision designed for edge skiving and whole surface skiving of leather for wallets, leather bags, shoes, boots, chaps, straps and more. It is used to skive and thin out the edges of leather to create clean and consistent ends.
The SK-5 has a more powerful feeding mechanism for skiving much thicker materials. Cost of production is higher on this model. For most people the SK-4 is the more suitable machine, it’s great for leather used in footwear, leather goods, bags, purses etc. The SK-5 is designed for belts, straps, harnesses etc but not for thin leather.
Skives light and medium leather up to 8oz
Up to 2" skiving width
Adjustable skiving width
Integrated blade sharpener
Includes assembled table and adjustable speed servo motor
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
The Techsew SK-4 Leather Skiver is precision designed for edge skiving and whole surface skiving of leather for wallets, leather bags, shoes, boots, chaps, straps and more. It is used to skive and thin out the edges of leather to create clean and consistent ends.
The SK-5 has a more powerful feeding mechanism for skiving much thicker materials. Cost of production is higher on this model. For most people the SK-4 is the more suitable machine, it’s great for leather used in footwear, leather goods, bags, purses etc. The SK-5 is designed for belts, straps, harnesses etc but not for thin leather.
Skives light and medium leather up to 8oz
Up to 2" skiving width
Adjustable skiving width
Integrated blade sharpener
Includes assembled table and adjustable speed servo motor
Extended US Warranty: 90 days adjustments or 30 days replacement on materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
For 8-9oz leather the SK-5 would be the best machine. The SK-4 works best in the range of about 2-3oz to 7-8oz.Features:
- Precision designed for simple and smooth operation
- Built in blade sharpener
- Adjustable skiving width
- Adjustable skiving speed
- Equipped with power stand and variable speed 550W Servo motor
- 1200 RPM Rotating Speed
- Skives light to medium leather up to 8oz
- Up to 2" skiving width
Reliable 7200SB Blind Hem Stitch Hemmer Machine, 6000SM Servo Motor, Needle Positioner, Assembled Power Stand Table, Uber Light Lamp Replaces 7100SB
 Reliable 7200SB Blind Hem Stitch Machine, Servo Motor, Lamp, Stand |
Our Price: $1,799.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Frame drop or plunger drop type? For a new machine, this is the main question. After 35 years in the frame drop camp, we can confirm that the plunger drop system is vastly superior, especially for today's light microfiber fabrics.
The all new 7200SB with direct drive technology is the sewing industry benchmark for excellence when productivity, durability, and stitch quality are your requirements. Skip stitch and adjustable stitch penetration allow you to fine tune from fine silks up to medium weight woolens.
QUALITY YOU CAN COUNT ON
For hemming pants, skirts and dresses, the 7200SB with “thread nipping device” (to allow easier removal of the hemmed fabric) offers the whole package. Direct drive technology, outstanding build quality and reliability.
The all new 7200SB with direct drive technology is the sewing industry benchmark for excellence when productivity, durability, and stitch quality are your requirements. Skip stitch and adjustable stitch penetration allow you to fine tune from fine silks up to medium weight woolens.
QUALITY YOU CAN COUNT ON
For hemming pants, skirts and dresses, the 7200SB with “thread nipping device” (to allow easier removal of the hemmed fabric) offers the whole package. Direct drive technology, outstanding build quality and reliability.
- Direct Drive
- Quick Release & Lock Stitch
- Adjustable Stitch Length
- Adjustable Set Depth
- Uberlight FLEX
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Maximum Sewing Speed 2,500 RPM
- Direct Drive Technology
- Stitch Length 0 - 0.32 in. / 0 – 8 mm
- Cylinder Diameter 2.23 in. / 58 mm
- Presser Foot Lift 0.32 in. / 8 mm
- Needle System #29BBL
- Skip Stitch Function 1:1 – 2:1 True Skip Stitch
- Eye Guard
- Swing-Away Plate
Reliable 7200DB Drapery Blind Stitch Hemmer Machine, Direct Drive 6000SM DCServo Motor, Needle Positioner, Swing Arm, Assembled Stand Table, Uber Lamp
 Reliable 7200DB Drapery Blind Stitch Hemmer Machine, Direct Drive 6000SM DCServo Motor, Needle Positioner, Swing Arm, Assembled Stand Table, Uber Lamp |
Our Price: $2,099.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
ETA in 30 Days! The 7200DB drapery BlindStitch hemming machine is made for drapery workrooms that are sewing medium to heavy weight fabric, with or without blackout. The 7200DB with “thread nipping device” (to allow easier removal of the hemmed fabric) and direct drive technology allows for a smoother sewing operation and ensures the needle stops in the same position. Every time.
The all new 7200DB with direct drive technology is the sewing industry benchmark for excellence when productivity, durability, and stitch quality are your requirements. Skip stitch and adjustable stitch penetration allow you to fine tune from medium to heavier weight fabrics.
MADE FOR THE TOUGHEST FABRICS
Specially set up for drapery hemming, the 7200DB with “thread nipping device” (to allow easier removal of the hemmed fabric) and heavy-duty fittings (perfect for adding black-out material) offers the whole package. Direct drive, outstanding build quality and reliability.
The all new 7200DB with direct drive technology is the sewing industry benchmark for excellence when productivity, durability, and stitch quality are your requirements. Skip stitch and adjustable stitch penetration allow you to fine tune from medium to heavier weight fabrics.
MADE FOR THE TOUGHEST FABRICS
Specially set up for drapery hemming, the 7200DB with “thread nipping device” (to allow easier removal of the hemmed fabric) and heavy-duty fittings (perfect for adding black-out material) offers the whole package. Direct drive, outstanding build quality and reliability.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Maximum Sewing Speed 1,700 RPM
- Direct Drive Technology
- Stitch Length 0 - 0.32” / 0 – 8 mm
- Cylinder Diameter 2.23” / 58 mm
- Presser Foot Lift 0.32” / 8 mm
- Needle System #29 BL
- Skip Stitch Function 1:1 – 2:1 True Skip Stitch
- Protective Eye Guard
- Swing-Away Plate
Reliable 2100IF Flatbead Top and Bottom Coverstitch Interlock Hemming Industrial Sewing Machine, Direct Drive, Differential Feed, Assembled Stand
 Reliable 2100IF Flatbead Coverstitch Interlock and Hemming Knits, Industrial Sewing Machine with Direct Drive and Assembled Stand |
Our Price: $2,299.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Three needle coverstitch sewing machine with direct drive! The 2100IF flatbed coverstitch machine with advanced Direct Drive technology provides the flexibility of using either 2 or 3 needles for hemming, cover seaming as well as collarette work (with optional attachments). Direct Drive means there’s no more belt to replace and you get the most accurate speed control to fit every level of sewer’s needs. With easy to thread looper, no stain seal to trap and prevent oil from leaking, built-in release mechanism to allow for easy removal of the material and an eye and needle guard for your safety.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
MAXIMUM SEWING SPEED: 6,000 RPM
-
MAX STITCH LENGTH: 0.17”/4.4 mm
-
PRESSER FOOT LIFT: 0.25” (with 6.3 mm (with limiter) limiter)
-
NEEDLE SYSTEM #: UY128GAS
-
NEEDLE GUAGE: 0.22” or 0.25” 5.6 or 6.4 mm
-
NEEDLE BAR STROKE: 1.22”/31 mm
-
LUBRICATION: Automatic
- DIRECT DRIVE TECHNOLOGY: Yes
Reliable 3200SN Needle Feed Only Industrial Sewing Machine Replaces, 5/11mm Foot Lift, 4mm SL, Reverse, AutoOil, 6000SM Servo Motor, Stand
 8051: Reliable 3200SN Needle Feed Only Industrial Sewing Machine & Stand |
Our Price: $1,499.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
- Quality is everything when you are sewing, so why settle for puckering on your garments?
- With the 3200SN you won't have to any longer. The needle feed motion of the 3200SN ensures that both the top and the bottom plies will be sewn evenly.
- All of the convenience features are standard to make your job easier: reverse lever, self oiler, and of course, Reliable™'s trusted reputation for building quality, long lasting equipment.
Reliable Warranty Information (.PDF)
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Ships LTL Ground freight only No Expedited Methods
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Model : 3200SN
- Maximum sewing speed (r.p.m.): 5,000
- Stitch length : 0-4 mm
- Needle bar stroke : 31.8 mm
- Presser foot lift
By hand: 5.0 mm
By knee : 11 mm
- Needle size : 16 x 257 #11-#14
- Feed dog : 3 Rows each
- Lubrication : Auto lubricated
- Rotating hook : Auto lubricating hook
SewQuiet 6000SM Servomotor. From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice. 12-coil technology means more torque and variable speed control will suit all operator levels.
Consew 315R2 Single Needle Feed Only Industrial Lockstitch Sewing Machine +Power Stand, 5000SPM, Auto Oil, 9/16" Foot Lift, 7SPI, Light Medium Fabrics
 1420: Consew 315R2 Single Needle Feed Industrial Lockstitch Sewing Machine, Table, Stand, Servo Motor |
Our Price: $1,619.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 5000 Stitches Per Minute
- Clearance Under Foot: 7/32"-Hand
- Clearance Under Foot: 9/16"-Knee
- Needle Bar Stroke:1-7/32"
- Bed Size: 7" x 18 7/8"
- Automatic Lubrication System
- Reverse Feed
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- High speed -5000 S.P.M. for light to medium-weight materials
- 4000 S.P.M. for medium to heavy-weight materials
- Horizontal axis transverse rotary hook
- Synchronized drop and needle feed assures even feeding of slippery and difficult to feed materials
- Fully automatic lubrication with recirculating pump
- For stitching ligth to medium weight fabric, knits, synthetics, vinyl, canvas, denim, coated and laminated materials
- Suitable for attaching pockets to shirts, sewing collars & cuffs, stitching skirts, blouses, dresses, raincoats and general wearing apparel
- Model 315RH - designed for sewing medium to heavy-weight materials
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki MO-6816S-FF6-50H 2 Needle 5 Thread Safety Stitch +Overlock Serger Machine, 6mm Stitch Width, Submerged Power Stand, DC Servo Motor, 100 Needles
 79702: Juki MO-6816S-FF6-50H 2 Needle 5 Thread Serger 6mm Wide, Submerged Power Stand, Servo Motor |
Our Price: $1,799.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Note: None of the parts for new MO-6817 are interchangeable with prior model MO-6716, in case you already have MO-6716. Juki MO6816 is the newest model from a different Juki factory, so none of the parts are interchangeable with MO6716. Otherwise there are no differences in basic functions and capabilities between the two machines. John
The Juki MO-6700S Series is a new and powerful overlock/safety stitch machine that has been developed to offer increased reliability and ease-of-use, while upgrading seam quality at higher sewing speeds. It responds to a wider range of materials and processes to finish high-quality soft-feeling seams.
With the operating noise having been reduced and increased durability ensured, the cost-effective MO-6816S is a leading machine in the new era.
More Juki MO-6816S Features:
Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 7,000rpm.
The newly adopted upper and lower needle bar bushings of the needle bar mechanism improve both the durability and reliability of the needle bar unit. The machine comes standard with a cartridge type oil filter and cooling fan for further improved reliability and durability.
The machine incorporates various mechanisms as standard, such as a differential-feed micro-adjustment mechanism and an external adjustment mechanism for adjusting the feed dog inclination as well as increasing the differential feed ratio, which can be easily adjusted to finish seams that perfectly match the material to be used.
Comfortable operation is all but guaranteed, by a wider area around the needle entry, the adoption as standard of a micro-lifter feature that offers improved responsiveness to materials and provides the operator with upgraded operability, and by the reduction of operating noise and vibration, which has been achieved by designing an optimally balanced machine.
Click HERE for Complete Color Brochure on Juki MO6800 Series Models MO6804, MO6814, MO6816, through MO6843. Not all models are stocked in USA.
Click HERE for Partial Brochure on Juki MO6800 Series Sergers MO6804, MO6814, MO6816. Not all models are stocked in USA.
Click HERE for Parts List on Juki MO6804, MO6814, MO6816
Sew All You Tube Videos on Juki MO6817, MO6716 Overlock and Safety Stitch Serger Machines
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
The MO-6800S Series responds to various kinds of sewing materials and processes, producing delicate and beautiful soft-to-the-touch seams while further reducing operating noise as well as increasing durability. This advanced overlock / safety stitch machine is easier to use and promises superior cost-effectiveness.responsiveness from light- to heavy-weight materials with a lower applied tension.MO-6800S Series
- Model name: MO-6816S
- Stitch type: 2-needle overlock Safety stitching
- Stitch style in the U.S.A.: 516
- Max. sewing speed :7,000rpm
- Stitch length : 1.5
- 4mm
- Needle gauge (mm): 2.0, 3.2, 4.0, 4.8, 4.8+2.0
- Overedging width (mm) : 3.2, 4.0, 4.8, 6.4
- Differential feed ratio :For gathering 1:2(Max. 1:4), For stretching 1:0.7(Max. 1:0.6)
- Needle bar stroke: 24.5mm
- Inclination angle of the needle: 20°
- Needle mechanism: Needle bar method and upper/lower bushing
- Needle: DC27(excluding some subclass model)
- Max. lift of the presser foot :7mm(excluding some subclass model)
- Max. presser foot pressure: 63.7N (6.5kg)
- Stitch adjusting method :By push-button
- Differential-feed adjusting method: By lever (with micro-adjustment)
- Weight of the machine head: 28kg
- Lubrication: Automatic
- Lubricating oil: JUKI Machine Oil 18 (equivalent to ISO VG18)
- Needle cooler: Optional
- Needle thread heat remover: Optional
- Micro-lifter: Provided as standard
Please review our Freight LTL shipping Policies
Yamata 1541S Industrial Single Needle Walking Foot Needle Feed Sewing Machine with Safety Clutch Mechanism and Servo Motor
 82239: Yamata 1541S Walking Foot Needle Feed Safety Clutch, Servo Motor, Stand |
Our Price: $1,799.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Similar to the Juki DNU-1541s , the Yamata 1541S is a single needle machine has a dual tension mechanism, with which the machine can support high tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light to heavy weight materials.
Ideal for medium to heavy-weight materials, such as: leather, leather belts, leather bags, leather wallets, automotive upholstery, furniture upholstery, sails, tents, sports and camping equipment, luggage, umbrellas, etc.
Features
Ideal for medium to heavy-weight materials, such as: leather, leather belts, leather bags, leather wallets, automotive upholstery, furniture upholstery, sails, tents, sports and camping equipment, luggage, umbrellas, etc.
Features
- Single Needle
- Walking Foot
- Adjustable Climbing Device
- Reverse
- Large Bobbin
- New Servo Motor. Assembly required!
- New Table Top
- Table Drawer
- New Table Legs. Assembly required!
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Max. Sewing Speed: 2500 stitches/minuteMax. Stitch Length: 9mm
Unit dimensions (LxWxH): 48 inches by 20 inches by 48 inches
Needle: 135 X 17
Juki DNU-1541S Walking Foot Needle Feed Sewing Machine, Power Stand, Casters, 3/4HP Servo Motor, Safety Clutch, M Bobbins, 9mm Stitch Length
 2515: Juki DNU1541S Walking Foot Needle Feed Sewing Machine, Power Stand, 550W, 3/4HP Servo Motor DNU-1541S |
Our Price: $2,399.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
*Note: The S in Juki DNU1541SN means Safety Clutch for retiming. If the needle hits the foot, plate, hook hard enough to untime so that the hook shaft does not turn with the handwheel, you can hold the silver button down with your left index finger and turn the hand wheel backwards with your right hand to put the macine back into timing of upper and lower shafts.
All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H . Will fit standard cut out.
All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H . Will fit standard cut out.
- Single Needle
- Needle Feed And Walking Foot
- Up to 2500 Stitches Per Minute
- Up to 9 Mm Stitch Length
- Industrial Upholstery Machine
- Safety Clutch Button right of needle plate for Retiming
- Includes Power Stand
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- With its larger needlebar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness
- Alternating vertical movements of the walking foot and presser foot are as large as 6.5 mm
- In addition, the ratio between alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes
- Rectangular feed prevents needle from fraying
- Sews multi-layered parts of a material with consistent stitching pitch while preventing stitch gathering
- When the thread is caught in the hook or any other sewing trouble occurs, the safety mechanism will automatically operate to prevent the machine from being damaged
- Stitch length can be easily selected by the stitch dial
- Includes a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel
- Knee-lifter mechanism is built in the bed which reduces the pressure required to operate facilities setup
- Machine's full open-type top design makes adjusting works easier
- Machine comes with a lubricating mechanism that uses a centralized oil wick which substantially reduces the time and trouble required for oiling the machine
- A walking foot mechanism is built into the machine arm to prevent oil from scattering
- Stitch length: 9 mm
- Needle bar stroke: 36 mm
- Presser foot lift clearance by hand: 9 mm
- Presser foot lift clearance by knee: 16 mm
- Hook type: Horizontal-axis full-rotary double-capacity hook
- Needle: 135 x 17
- Thread: #30
- #5, B46
- B138, Nm=60/3
- 15/3
- Distance from needle to machine arm: 10.3"
- Bed size is 477mm 178mm, or 18.75" x 7" standard flatbed.
- Weight of machine head: 80.47 lbs
- UL Listed
Downloads (.PDF)
• Instruction Manual
• Specifications
• Parts list
• Juki Parts Store for for Price and Availability
• Product Information
TechSew 810 7"H Post Bed Roller Foot Bottom Feed Leather Stitcher Sewing Machine, Servo Motor Power Stand Assembled
 94149: TechSew 810 7"H Post Bed Roller Foot Bottom Feed Leather Stitcher/Stand |
Our Price: $2,499.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
We expect the 810 back in stock by the end of 2021. Once in stock, shipping time would be about 2 weeks.
The Techsew 810 sews light to medium-heavy weight materials such as leather, vinyl, synthetics, canvas and various coated and laminated products. The Wig Dome is easily removed with 2 screws and then the machine can be used for regular sewing.
Designed for stitching such products as stitching and repairing shoes, wallets, belts, purses, and any other light to medium leatherwork. Will easily sew canvas, vinly, denim, patches for caps/hats and other similar products.
The Techsew 810 sews light to medium-heavy weight materials such as leather, vinyl, synthetics, canvas and various coated and laminated products. The Wig Dome is easily removed with 2 screws and then the machine can be used for regular sewing.
Designed for stitching such products as stitching and repairing shoes, wallets, belts, purses, and any other light to medium leatherwork. Will easily sew canvas, vinly, denim, patches for caps/hats and other similar products.
- NEW 600W Digital Energy Efficient Techsew Smart Servo Motor - the most powerful and versatile motor on the market
- Heavy duty rollerfoot mechanism - great for sewing along the edges and for multi-layered materials
- High roller foot clearance - plenty of space to fit bulky and multi-layered materials beneath the roller foot
- Reverse feed to reinforce stitches
- LED Stitch Light illuminates your stitches in low lighting areas
- Oil Drip Pan Underneath Head.
- Includes Complete Reinforced table with locking casters
- 6 Month Warranty on the Machine, 1 Year Warranty on the Motor
Techsew 810 Post Bed Sewing Machine with Included Wig Attachment on a separate webpage.
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for How to Change your Roller Foot to a Regular Presser Foot on TechSew 810- Sewing Capacity: 5/16" (20oz)
- Roller foot clearance: 3/8"
- Post-bed height: 7"
- Stitch length adjustment 5-25 Stitches per Inch (1-5mm)
- Needles: 135x5 #11-21
- 10656 bobbins
- Thread Sizes: #23 to #92
- Techsew SmartServo Motor: 110V, 600W, 0 to 1800RPM, bright digital LED display
Click here for product brochure (.PDF)
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DNU-1541S Walking Foot Needle Feed Machine, Power Stand, Fully Assembled Ready To Sew, Safety Clutch, MBobbins, 9mm Stitch Length, 9/16"Foot Lift
 |
Our Price: $1,999.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
ETA This Month! Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand, belt tension adjusted, belt guard installed, and sewn off, You only have to set up the thread stand. It ships from Atlanta
Industrial Sewing Machine & Power Stand, Large M Bobbin, 9mm S.L., 9/16mm Foot Lift, The best basic upholstery machine on the market and the only one still made in Japan along with safety clutch, Optional 1508/H heavier duty model. Fully Assembled Ready To Sew!
Complete with Table, Stand, 110V Motor and Drawer
Comparison: All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H . Will fit standard cut out.
Industrial Sewing Machine & Power Stand, Large M Bobbin, 9mm S.L., 9/16mm Foot Lift, The best basic upholstery machine on the market and the only one still made in Japan along with safety clutch, Optional 1508/H heavier duty model. Fully Assembled Ready To Sew!
Complete with Table, Stand, 110V Motor and Drawer
Comparison: All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H . Will fit standard cut out.
- Single Needle
- Safety Clutch to protect hook and put back into timing if knocked out.
- Compound Needle Feed And Walking Foot
- Speed up to 3000 Stitches Per Minute
- 9 Mm Stitch Length
- Industrial Upholstery Machine
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- With its larger needlebar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness
- Alternating vertical movements of the walking foot and presser foot are as large as 6.5 mm
- In addition, the ratio between alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes
- Rectangular feed prevents needle from fraying
- Sews multi-layered parts of a material with consistent stitching pitch while preventing stitch gathering
- When the thread is caught in the hook or any other sewing trouble occurs, the safety mechanism will automatically operate to prevent the machine from being damaged
- Stitch length can be easily selected by the stitch dial
- Includes a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel
- Knee-lifter mechanism is built in the bed which reduces the pressure required to operate facilities setup
- Machine's full open-type top design makes adjusting works easier
- Machine comes with a lubricating mechanism that uses a centralized oil wick which substantially reduces the time and trouble required for oiling the machine
- A walking foot mechanism is built into the machine arm to prevent oil from scattering
- Stitch length: 9 mm
- Needle bar stroke: 36 mm
- Presser foot lift clearance by hand: 9 mm
- Presser foot lift clearance by knee: 16 mm
- Hook type: Horizontal-axis full-rotary double-capacity hook
- Needle: 135 x 17
- Thread: #30
- #5, B46
- B138, Nm=60/3
- 15/3
- Distance from needle to machine arm: 10.3"
- Bed size is 477mm 178mm, or 18.75" x 7" standard flatbed.
- Weight of machine head: 80.47 lbs
- UL Listed
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Downloads (.PDF)
• Instruction Manual
• Specifications
• Parts list
• Product Brochure
Juki DDL8700-7-WB AK CP18 Auto Backtack, Thread Trim, Foot Lift & Needle Positioner Industrial Sewing Machine, Bedsize 7x18-25/32" Servo Motor, Stand
 2508: Juki DDL8700-7-WB AK CP18 Auto Backtack, Thread Trim, Foot Lift & Needle Positioner Industrial Sewing Machine, Bedsize 7x18-25/32" Servo Motor, Stand |
Our Price: $2,249.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval
Juki's latest DDL8700-7 below has automatic needle positioner up, auto back tack reverse, auto thread trim, and auto foot lift which eliminates so many hand operations in turning the handwheel, pressing the reverse lever, using scissors to cut thread, and using the presser foot lifter or knee lever to raise the presser foot to insert and remove fabrics. DDL-7 models automate those manual tasks, although the manual functions and controls are all still there in case you need them.
Juki DDL8700-7-WB Auto Backtack Thread Trim Foot Lift Machine/Stand is a wonderful addition to your sewing room if you looking for an industrial type machine with a control panel.
The control box is SC920CD-AA4, Industrial Sewing Machine & Stand, 11" Arm Space from Needle to Neck, up to 5500 SPM Stitches per Minute, 5.5-13mm 1/2" Presser Foot LIft by Lever/Knee, Needle Positioner, up to 4mm Stitch Length, down to 6 SPi Stitches Per Inch, Stand, Auto Oil, Servo Motor.
Juki's latest DDL8700-7 below has automatic needle positioner up, auto back tack reverse, auto thread trim, and auto foot lift which eliminates so many hand operations in turning the handwheel, pressing the reverse lever, using scissors to cut thread, and using the presser foot lifter or knee lever to raise the presser foot to insert and remove fabrics. DDL-7 models automate those manual tasks, although the manual functions and controls are all still there in case you need them.
Juki DDL8700-7-WB Auto Backtack Thread Trim Foot Lift Machine/Stand is a wonderful addition to your sewing room if you looking for an industrial type machine with a control panel.
The control box is SC920CD-AA4, Industrial Sewing Machine & Stand, 11" Arm Space from Needle to Neck, up to 5500 SPM Stitches per Minute, 5.5-13mm 1/2" Presser Foot LIft by Lever/Knee, Needle Positioner, up to 4mm Stitch Length, down to 6 SPi Stitches Per Inch, Stand, Auto Oil, Servo Motor.
- DDL-8700-7/SC920C/M92
- 4,500-5,000 Max Sewing Speed
- 4.5mm Stitch Length
- Non Rotating Bobbin Device
- Automatic Thread Trimmer
- Automatic Backtack
- Automatic Foot Lift
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki DDL-8700-7/SC-920C/M92 Catalog Brochure PDFClick HERE for Juki DDL8700-7 Specifications and Options
Juki DDL-8700B-7 Instruction Manual PDF
Juki DDL-8700B-7 Instruction Manual PDF
- 1-Needle, lockstitch, machine with new non-rotating bobbin device, automatic thread trimmer, auto foot lift and new servo motor.
- Sewing quality is even and consistent with the non-rotating bobbin device, composed of a special hook, bobbin and bobbin case
- Bobbin thread tension remains constant and thread remains tight when trimmed
- 5,000 maximum sewing speed
- 4.5mm stitch length
- Non rotating bobbin device
- Automatic thread trimmer
- Presser foot lift by hand, 5.5 mm; by knee, 13 mm
- Needle bar stroke 30.7 mm
- Hook auto lubricating full rotary hook
Functions and utilization of the sewing machine with an automatic thread trimmer. JUKI Magazine(International) Vol.5
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DDL8700-7-WB AK CP18 Auto Needle Positioner, Backtack, Thread Trim, & Foot Lift Sewing Machine, Stand, Servo Motor, Fully Assembled, Ready to Sew
59962: Juki DDL8700-7-WB AK CP18 Backtack, Thread Trim, Foot Lift, Sewing Machine/Stand, Fully Assembled, Ready to Sew |
Our Price: $2,499.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand with the oil pan installed, belt tension adjusted, belt guard installed, and sewn off, You only have to pour in the oil and set up the thread stand. It ships from Atlanta.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval
Juki's latest DDL8700-7 below has automatic needle positioner up, auto back tack reverse, auto thread trim, and auto foot lift which eliminates so many hand operations in turning the handwheel, pressing the reverse lever, using scissors to cut thread, and using the presser foot lifter or knee lever to raise the presser foot to insert and remove fabrics. DDL-7 models automate those manual tasks, although the manual functions and controls are all still there in case you need them.
Industrial Sewing Machine & Stand, 11" Arm Space from Needle to Neck, up to 5500 SPM Stitches per Minute, 5.5-13mm 1/2" Presser Foot LIft by Lever/Knee, Needle Positioner, up to 4mm Stitch Length, down to 6 SPi Stitches Per Inch, Stand, Auto Oil, Servo Motor.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval
Juki's latest DDL8700-7 below has automatic needle positioner up, auto back tack reverse, auto thread trim, and auto foot lift which eliminates so many hand operations in turning the handwheel, pressing the reverse lever, using scissors to cut thread, and using the presser foot lifter or knee lever to raise the presser foot to insert and remove fabrics. DDL-7 models automate those manual tasks, although the manual functions and controls are all still there in case you need them.
Industrial Sewing Machine & Stand, 11" Arm Space from Needle to Neck, up to 5500 SPM Stitches per Minute, 5.5-13mm 1/2" Presser Foot LIft by Lever/Knee, Needle Positioner, up to 4mm Stitch Length, down to 6 SPi Stitches Per Inch, Stand, Auto Oil, Servo Motor.
- DDL-8700-7/SC920C/M92
- 4,500-5,000 Max Sewing Speed
- 4.5mm Stitch Length
- Non Rotating Bobbin Device
- Automatic Thread Trimmer
- Automatic Backtack
- Automatic Foot Lift
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki DDL-8700-7/SC-920C/M92 Catalog Brochure PDFClick HERE for Juki DDL8700-7 Specifications and Options
Juki DDL-8700B-7 Instruction Manual PDF
Juki DDL-8700B-7 Instruction Manual PDF
- 1-Needle, lockstitch, machine with new non-rotating bobbin device, automatic thread trimmer, auto foot lift and new servo motor.
- Sewing quality is even and consistent with the non-rotating bobbin device, composed of a special hook, bobbin and bobbin case
- Bobbin thread tension remains constant and thread remains tight when trimmed
- 5,000 maximum sewing speed
- 4.5mm stitch length
- Non rotating bobbin device
- Automatic thread trimmer
- Presser foot lift by hand, 5.5 mm; by knee, 13 mm
- Needle bar stroke 30.7 mm
- Hook auto lubricating full rotary hook
Functions and utilization of the sewing machine with an automatic thread trimmer. JUKI Magazine(International) Vol.5
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Techsew 1660 Walking Foot Needle Feed Leather Stitcher Industrial Sewing Machine, Assembled Power Stand, Smart Servo Motor, Lamp (Like Juki DNU1541S)
 86688: Techsew 1660 Walking Foot Needle Feed Leather Sewing Machine, Assembled Power Stand, Lamp |
Our Price: $2,549.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
The Techsew 1660 sews light and medium weight materials such as leather, vinyl, upholstery, synthetics, canvas and various coated and laminated products.
It is designed for auto, marine and aviation upholstery, leather work (belts, vests, leashes, saddle bags, notebook covers, chaps etc), boat covers, awnings, luggage, sports and camping equipment, canvas, orthopedics and more
Features:
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
The Techsew 1660 sews light and medium weight materials such as leather, vinyl, upholstery, synthetics, canvas and various coated and laminated products.
It is designed for auto, marine and aviation upholstery, leather work (belts, vests, leashes, saddle bags, notebook covers, chaps etc), boat covers, awnings, luggage, sports and camping equipment, canvas, orthopedics and more
Features:
- Compound walking-foot (alternating presser feet + needle feed + feed dog) to help feed thick & bulky materials
- Reverse Feed for reinforcing stitches
- Large Extra-Capacity Bobbin
- Large flywheel
- Includes the Techsew SmartServo motor for complete control of your stitching speed
- Integrated bobbin winder
- Extra-high presser foot lift
- Drop-in bobbin for easy access to the bobbin case
- Easy Stitch Length Adjustment
- Safety Clutch System protects the machine's inner components
- Includes complete table, SmartServo motor, threadstand, TS-28 LED lamp and accessories (oil, bobbins, tools, needles, instruction manual)
- Includes Limited Lifetime Warranty and FREE technical support for the life of your machine
- Machine comes inspected, oiled, adjusted and READY TO SEW
Applications:
Designed for stitching such products as auto, boat and furniture upholstery, tarpaulins, covers, sails, tents, camping trailer covers, awnings, umbrellas, tops, bags, luggage, handbags, travelware accessories, sports and camping equipment, wearing apparel, outdoor clothing, canvas shoes, slippers, orthopedic appliances etc.
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
Specifications:Presser Foot Clearance: 5/8" (16mm)
Sewing Capacity: 3/8" (10mm)
Maximum Stitch Length: 9mm
Maximum Sewing Speed: 2500SPM
Needle Sizes: #18 to #24
Thread Sizes: #46 to 210
SmartServo Motor: 110V, 800W, 1 HP, 300 to 1800RPM speed settings
TechSew 810-WIG 7"H Post Bed Roller Foot Bottom Feed Leather Stitcher Sewing Machine/Assembled Power Stand, Includes Wig Attachment
 29034: TechSew 810-1 7"H Post Bed Roller Foot Bottom Feed Leather Stitcher and Wig Machine |
Our Price: $2,849.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
We expect the 810 back in stock by the end of April, 2020. Once in stock, shipping time would be about 2 weeks.
The Techsew 810 sews light to medium-heavy weight materials such as leather, vinyl, synthetics, canvas and various coated and laminated products. The Wig Dome is easily removed with 2 screws and then the machine can be used for regular sewing.
Designed for stitching such products as stitching and repairing shoes, wallets, belts, purses, and any other light to medium leatherwork. Will easily sew canvas, vinly, denim, patches for caps/hats and other similar products.
The Techsew 810 sews light to medium-heavy weight materials such as leather, vinyl, synthetics, canvas and various coated and laminated products. The Wig Dome is easily removed with 2 screws and then the machine can be used for regular sewing.
Designed for stitching such products as stitching and repairing shoes, wallets, belts, purses, and any other light to medium leatherwork. Will easily sew canvas, vinly, denim, patches for caps/hats and other similar products.
- NEW 600W Digital Energy Efficient Techsew Smart Servo Motor - the most powerful and versatile motor on the market
- Heavy duty rollerfoot mechanism - great for sewing along the edges and for multi-layered materials
- High roller foot clearance - plenty of space to fit bulky and multi-layered materials beneath the roller foot
- Reverse feed to reinforce stitches
- LED Stitch Light illuminates your stitches in low lighting areas
- Oil Drip Pan Underneath Head.
- Includes Complete Reinforced table with locking casters
- 6 Month Warranty on the Machine, 1 Year Warranty on the Motor
Techsew 810 Post Bed Sewing Machine with Included Wig Attachment.
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for How to Change your Roller Foot to a Regular Presser Foot on TechSew 810- Sewing Capacity: 5/16" (20oz)
- Roller foot clearance: 3/8"
- Post-bed height: 7"
- Stitch length adjustment 5-25 Stitches per Inch (1-5mm)
- Needles: 135x5 #11-21
- 10656 bobbins
- Thread Sizes: #23 to #92
- Techsew SmartServo Motor: 110V, 600W, 0 to 1800RPM, bright digital LED display
Click here for product brochure (.PDF)
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Yamata FY LU1508NH Walking Foot Needle Feed Upholstery Machine for Leather Vinyl Canvas, Power Stand, Servo Motor
 Yamata FY1508NH Single Needle Walking Foot Lockstitch Machine, Power Stand, Servo Motor |
Our Price: $2,435.71 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Single needle walking foot lockstitch machine with large vertical hook for heavy weight materials. The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering.
Max speed: 2000 SPM
Max stitch length: 10mm
Needle bar stroke: 38mm
Max presser foot by knee: 16mm
Max presser foot by hand: 9mm
Working space: 255mm
Max speed: 2000 SPM
Max stitch length: 10mm
Needle bar stroke: 38mm
Max presser foot by knee: 16mm
Max presser foot by hand: 9mm
Working space: 255mm
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Yamata 1508NHDescription:
High-Quality & Economical Prices
The 1508NH is very much like a Juki 1508NH with some improvements such as; Adjustable Climbing Device and Adjustable Take-Up Guide for thread loop timing
Applications:
- The preferred style walking foot machine with all the features of expensive European Style machines At an Economical Price
- Standard presser feet & needles and Big Bobbins
Features:
Built in Knee Lifter
Built in Bobbin Winder
Safety Clutch Reset Button
Drop in Large Bobbin
Rectangular Feed Motion
Semi automatic Lubrication System
Large vertical Automatically Oiled Hook
High Needle Bar Stroke
190R Needle System
High Presser Foot Lift
Quick Release Knee Presser Pedal
Easy Dial-Adjustable stitch regulator
Reverse
Built-In Synchronizer Hub
Adjustable Climbing Device
Large Hand Wheel
This is a complete unit with New Table Stand with Adjustable K-Legs and a 3/4 HP. FESM 550 3/4 H.P. Servo Motor 110V.
Videos on LU1508 Type Machines
Techsew SK-4VAC Leather Skiving Machine with Vacuum Suction Device, Assembled Table, Stand and Servo Motor
 88515: Techsew SK-5 Heavy Duty Leather Skiving Machine,Vacuum Suction Table,Motor |
Our Price: $2,795.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
The Techsew SK-4 Leather Skiver is precision designed for edge skiving and whole surface skiving of leather for wallets, leather bags, shoes, boots, chaps, straps and more. It is used to skive and thin out the edges of leather to create clean and consistent ends.
The SK-5 has a more powerful feeding mechanism for skiving much thicker materials. Cost of production is higher on this model. For most people the SK-4 is the more suitable machine, it’s great for leather used in footwear, leather goods, bags, purses etc. The SK-5 is designed for belts, straps, harnesses etc but not for thin leather.
Includes stand and vacuum suction device with sealed scrap bin for easy waste removal.
Features:
The SK-5 has a more powerful feeding mechanism for skiving much thicker materials. Cost of production is higher on this model. For most people the SK-4 is the more suitable machine, it’s great for leather used in footwear, leather goods, bags, purses etc. The SK-5 is designed for belts, straps, harnesses etc but not for thin leather.
Includes stand and vacuum suction device with sealed scrap bin for easy waste removal.
Features:
- Top and bottom feed
- Precision designed for simple and smooth operation
- Built in blade sharpener
- Adjustable skiving width. 10 to 40mm skiving width (up to 1.5")
- Adjustable skiving speed
- Equipped with power stand and variable speed 550W Servo motor
- 1200 RPM Rotating Speed
- Skives light to medium leather up to 8oz
- Up to 2" skiving width
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
Notice: For 8-9oz leather the SK-5 would be the best machine. The SK-4 works best in the range of about 2-3oz to 7-8oz.Techsew 2900 12" Arm, 1-4/32"Ø Cylinder Bed Shoe Repair, Leather Patching Machine, Assembled Power Stand, Servo Motor, 360 Degree Directional Top Feed
 32887: TechSew 2900 12"Arm 1.2"Ø Cylinder Bed Shoe Repair Leather Patch Machine/Stand* |
Our Price: $2,999.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
Includes Assembled Power Stand, DC Servo Motor, Larger Bobbins, 360 Degree Rotation of Top Feed, 1/4" Sewing Thickness Capacity, 13/32"Walking Foot Presser Foot Lift, Maximum Stitch Length to 3.5 SPI Stitches Per Inch, up to 500 SPM Stitches Per Minute, Hand Crank Mounted on Front of Machine.
The Techsew 2900 is the finest in leather patching machines, designed for repairing shoes, boots and purses and sewing patches onto leather.
Class 29 leather stitcher shoe patch type machines have a foot that can rotate. It can sew up to 7mm thick and has the most narrow cylinder arm of any industrial sewing machine.
The Techsew 2900 is the finest in leather patching machines, designed for repairing shoes, boots and purses and sewing patches onto leather.
Comes with Assembled Power Stand and DC Servo Motor, 360° Top Feed, 13/32" Presser Foot Lift, Stitch Length to 3.5 SPI Stitches Per Inch, up to 500 SPM Stitches Per Minute Speed, Hand Crank for Needle Positioning, insertion and removal of materials being sewn.
Techsew 2900 Industrial Sewing Machine
12" Arm, 1.125" Diameter Cylinder Bed, Leather and Shoe Patch Repair Machine*
The Techsew 2900 is the finest in leather patching machines, designed for repairing shoes, boots and purses and sewing patches onto leather.
Class 29 leather stitcher shoe patch type machines have a foot that can rotate. It can sew up to 7mm thick and has the most narrow cylinder arm of any industrial sewing machine.
The Techsew 2900 is the finest in leather patching machines, designed for repairing shoes, boots and purses and sewing patches onto leather.
Comes with Assembled Power Stand and DC Servo Motor, 360° Top Feed, 13/32" Presser Foot Lift, Stitch Length to 3.5 SPI Stitches Per Inch, up to 500 SPM Stitches Per Minute Speed, Hand Crank for Needle Positioning, insertion and removal of materials being sewn.
- 12" Long cylinder arm
- 360 degree rotating presser foot for sewing in any direction
- 1-4/32" or 1.125" 28.575mm cylinder arm diameter
- 12" Long cylinder arm
- Oscillating Shuttle
- 360 degree rotating presser foot for sewing in any direction
- 1/4" foot lift sewing capacity
- Reinforced steel pedestal style stand on wheels for largest work area
- Powered by the Techsew SmartServo motor & speed reducer for slow and controlled stitching speeds
- Can be manually operated by hand
- Includes needles, bobbins, tools, instruction manual
- Industrial Shoe Repair, Leather Patching Machine
- Machine comes inspected, oiled, adjusted and READY TO SEW
Non-US Warranty: 30 days parts and labor.
Specifications
- Cylinder arm length: 12"
- Sewing capacity: 1/4"
- Maximum sewing speed: 500 SPM
- Needle system: 135x17
- Needle sizes: #16 to #20
- Thread sizes: #46 to #90
- Techsew SmartServo motor: 800W, 1HP, 110V, 18 speed settings from 300 to 1800RPM
Techsew 2900 Industrial Sewing Machine - How to Insert the Bobbin
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
DOWNLOAD MANUAL
Techsew 830 Post Bed Roller Feed Industrial Sewing Machine Table and Motor
 Techsew 830 Post Bed Roller Feed Industrial Sewing Machine Table and Motor |
Our Price: $3,195.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Synchronized top and bottom roller feed
- 1/2" Presser Foot Clearance
- 7" Post Bed Height
- Includes table and variable speed Servo motor
The Techsew 830 sews light to medium weight materials such as leather, vinyl, synthetics, canvas and synthetic materials.
The synchronized upper and lower roller feed mechanism allows you to sew closer to the edge of your material than other types of machines. This feeding mechanism provides a highly visible stitch line and feeds multiple layers evenly, delivering high quality results.
Designed for sewing shoes, boots, wallets, watch straps, belts, purses, tote bags and any other light to medium leather goods. Will easily sew canvas, vinyl, denim and synthetic materials.
Features:
- Synchronized upper and lower roller feed mechanism - Allows you to sew closer to the edge of your material than other types of machines
- Stitch length adjustment up to 5mm
- Reverse
- Includes variable speed Servo Motor for full control of sewing speed
- High presser foot clearance - plenty of space to fit bulky and multi-layered materials beneath the roller foot
- Includes table, motor, TS-28 LED lamp, bobbin winder, thread stand, needles, bobbins, repair tools, instruction manual
- Includes Limited Lifetime Warranty and FREE technical support for the life of your machine
- Machine comes assembled, inspected, oiled, adjusted and READY TO SEW
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
- Sewing Capacity: 3/8"
- Presser foot clearance: 1/2"
- Post-bed height: 7"
- Stitch length adjustment 5-25 Stitches per Inch (1-5mm)
- Needles: 135x5 #11-22
- Thread Sizes: #23 to #138
- Motor: 110v 750W variable speed SmartServo motor
TechSew 830-2-R Single and/or Double Needle 7"H Post Bed Sewing Machine, Leather Roller Foot +Power Stand Servo Motor, Size 18 Needle for #69 Thread
 41378: TechSew 830-2 Single and Double Needle 7"H Post Bed Roller Foot Sewing Machine +Power Stand |
Our Price: $3,395.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
Since 830-2 is discontinued, 810 is still available.
Includes Servo Motor 1800RPM, 1/2" Presser Foot Lift, Sewing Capacity 3/8" up to 20oz Leather, 5-25mm Stitches Per Inch, Needles 135x5 Size 11 to 22, Thread Sizes 23 to 138
The TechSew 830-2-R sews light to medium weight materials such as leather, vinyl, synthetics, canvas and various coated and laminated products. Also used for attaching patches on caps/hats.
The synchronized upper and lower roller feed mechanism allows you to sew closer to the edge of your material than any other sewing machine.This feeding mechanism provides a highly visible stitch line and feeds multiple layers evenly, delivering the highest quality results.
Designed for stitching such products as stitching and repairing shoes, wallets, belts, purses, and any other light to medium leather work. Will easily sew canvas, vinyl, denim and other similar products.
Features:
Includes Servo Motor 1800RPM, 1/2" Presser Foot Lift, Sewing Capacity 3/8" up to 20oz Leather, 5-25mm Stitches Per Inch, Needles 135x5 Size 11 to 22, Thread Sizes 23 to 138
The TechSew 830-2-R sews light to medium weight materials such as leather, vinyl, synthetics, canvas and various coated and laminated products. Also used for attaching patches on caps/hats.
The synchronized upper and lower roller feed mechanism allows you to sew closer to the edge of your material than any other sewing machine.This feeding mechanism provides a highly visible stitch line and feeds multiple layers evenly, delivering the highest quality results.
Designed for stitching such products as stitching and repairing shoes, wallets, belts, purses, and any other light to medium leather work. Will easily sew canvas, vinyl, denim and other similar products.
Features:
- 2 Needle machine for a double row of stitching- can also be used as single needle machine
- Synchronized upper and lower roller feed mechanism - Allows you to sew closer to the edge of your material than other types of machines
- Reverse feed
- Stitch length adjustment up to 5mm
- Includes variable speed Servo motor for full control of sewing speed
- High presser foot clearance - plenty of space to fit bulky and multi-layered materials beneath the roller foot
- Includes table, motor, TS-28 LED lamp, bobbin winder, thread stand, needles, bobbins, repair tools, instruction manual
- Includes Limited Lifetime Warranty and FREE technical support for the life of your machine
- Machine comes assembled, inspected, oiled, adjusted and ready to sew!
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
- Sewing Capacity: 3/8"
- Presser foot clearance: 1/2"
- Post-bed height: 7"
- Stitch length adjustment 5-25 Stitches per Inch (1-5mm)
- Needles: 135x5 #11-21
- Thread Sizes: #23 to #92
Techsew 2900L 18"Arm 1.125" Cylinder Bed Shoe Repair Leather Patch Machine, Assembled Pedestal Stand, 110V Servo Motor
 Techsew 2900L 18"Arm 1" Cylinder Bed Shoe Leather Patch Machine +Stand |
Our Price: $3,699.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
ETA within 30 Days! Includes Assembled Power Stand, DC Servo Motor, Larger Bobbins, 360 Degree Rotation of Top Feed, 1/4" Sewing Thickness Capacity, 13/32" Walking Foot Presser Foot Lift, Maximum Stitch Length 3.5 SPI Stitches Per Inch, Speed up to 500 SPM Stitches Per Minute, Hand Crank Mounted on Front of Machine.
Class 29 leather stitcher shoe patch type machines have a foot that can rotate. It can sew up to 7mm thick and has the most narrow cylinder arm of any industrial sewing machine.
*Comes with Assembled Power Stand and DC Servo Motor, 360° Top Feed, 13/32" Presser Foot Lift, Stitch Length Adjustable to 3.5 SPI Stitches Per Inch, up to 500 SPM Stitches Per Minute Speed, Hand Crank for Needle Positioning, insertion and removal of materials being sewn.
The Techsew 2900L is the finest in leather patching machines, designed for repairing shoes, boots and purses and sewing patches onto leather.
Techsew 2900L Industrial Sewing Machine
18" Cylinder Long Arm Leather Patching Machine. Power Stand, Servo Motor
Class 29 leather stitcher shoe patch type machines have a foot that can rotate. It can sew up to 7mm thick and has the most narrow cylinder arm of any industrial sewing machine.
*Comes with Assembled Power Stand and DC Servo Motor, 360° Top Feed, 13/32" Presser Foot Lift, Stitch Length Adjustable to 3.5 SPI Stitches Per Inch, up to 500 SPM Stitches Per Minute Speed, Hand Crank for Needle Positioning, insertion and removal of materials being sewn.
The Techsew 2900L is the finest in leather patching machines, designed for repairing shoes, boots and purses and sewing patches onto leather.
- 1-4/32" or 1.125" 28.575mm cylinder arm diameter
- 18" Long narrow cylinder arm
- Large bobbin
- Oscillating Shuttle
- 360 degree rotating presser foot for sewing in any direction
- 1/4" foot lift sewing capacity
- Reinforced steel pedestal style off the arm stand on wheels for largest work area
- Powered by the Techsew SmartServo motor & speed reducer for slow and controlled stitching speeds
- Can be manually operated by hand
- Includes needles, bobbins, tools, instruction manual
- Industrial Shoe Repair, Leather Patching Machine
- Machine comes inspected, oiled, adjusted and READY TO SEW
Non-US Warranty: 30 days parts and labor.
Specifications
-
Cylinder arm length: 18"
-
Sewing capacity: 1/4"
-
Maximum sewing speed: 500 SPM
-
Needle system: 135x17
-
Needle sizes: #16 to #20
-
Thread sizes: #46 to #90
-
Techsew SmartServo motor: 600W, 4/5HP, 110V, 18 speed settings from 100 to 1800RPM
- Used for repairing leather materials and shoe uppers
- Universal upper feed for stitching in any direction without turning work
- Oscillating shuttle
- Handwheel can be mounted on front or right end of machine
- Wheel pulley "V" grooved for motor drive
- Adjustable thread take-up lever
- Adjustable presser foot pressure and thread tension
- Machine can be driven by foot treadle, hand crank or electric motor
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
DOWNLOAD MANUAL
Techsew 4800 Cylinder Walking Foot Needle Feed Sewing Machine, UTable Stand, Servo Motor, 10"Arm, 1/2"Leather, Adj Climbing Foot, M Top Bobbin, Winder
 Techsew 4800 Cylinder Walking Foot Needle Feed Sewing Machine, Assembled Stand, Servo Motor, 10"Arm, 1/2" Leather, Adj Climbing Foot, M Bobbin Winder |
Our Price: $3,799.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
In Stock! Leather Sewing Machine for Light to Heavy Weights, 750W 110V Smart Servo Motor, 2500SPM, Safety Clutch, Speed Reducer, 5/8" Lift, DropIn Bobbin, Knee Lift, 9mm Stitch Length,
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
• Compound walking-foot feeding mechanism - Sews up to 1/2" thick leather
• 10" Cylinder arm
• Large, extra-capacity bobbin
• Uses thread sizes #46 to #277
• Dual tension control
• Adjustable presser foot climbing mechanism
• Integrated bobbin winder
• Includes assembled table & adjustable speed SmartServo motor
The Techsew 4800 is designed for sewing a broad range of leather goods including bags, belts, wallets, upholstery, saddle bags, satchels and more. It is also suitable for sewing nylon webbing, canvas, denim, heavy fabrics and synthetics.
With its higher presser foot clearance, newly adopted dual-tension control, adjustable presser foot climbing mechanism and larger thread size capability, the 4800 offers increased work efficiency along with the highest seam quality for fine leather products.
APPLICATIONS:
Light to heavy-weight leather (1-2oz to ½” maximum thickness)
Light to medium weight nylon webbing
Medium to heavy weight canvas, denim, fabrics, synthetic materials
MACHINE FEATURES:
Compound walking foot feeding mechanism
Large extra-capacity hook (M-style bobbin)
Dual-tension control for more precise thread tension
Adjustable presser foot climbing mechanism helps maintain consistent stitch length on uneven materials
Includes variable speed SmartServo motor and speed reducer pulley for stitch by stitch control of sewing speed
Drop-in bobbin system for easy access to the bobbin
Reverse feed to reinforce stitches
Integrated bobbin winder
Knee lifter to raise the presser foot
Safety clutch
Includes Reinforced U-table, motor, tools, LED lamp, instruction manual, accessories
Limited Lifetime Warranty included
Individually inspected and sewn-on prior to shipping
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
• Compound walking-foot feeding mechanism - Sews up to 1/2" thick leather
• 10" Cylinder arm
• Large, extra-capacity bobbin
• Uses thread sizes #46 to #277
• Dual tension control
• Adjustable presser foot climbing mechanism
• Integrated bobbin winder
• Includes assembled table & adjustable speed SmartServo motor
The Techsew 4800 is designed for sewing a broad range of leather goods including bags, belts, wallets, upholstery, saddle bags, satchels and more. It is also suitable for sewing nylon webbing, canvas, denim, heavy fabrics and synthetics.
With its higher presser foot clearance, newly adopted dual-tension control, adjustable presser foot climbing mechanism and larger thread size capability, the 4800 offers increased work efficiency along with the highest seam quality for fine leather products.
APPLICATIONS:
Light to heavy-weight leather (1-2oz to ½” maximum thickness)
Light to medium weight nylon webbing
Medium to heavy weight canvas, denim, fabrics, synthetic materials
MACHINE FEATURES:
Compound walking foot feeding mechanism
Large extra-capacity hook (M-style bobbin)
Dual-tension control for more precise thread tension
Adjustable presser foot climbing mechanism helps maintain consistent stitch length on uneven materials
Includes variable speed SmartServo motor and speed reducer pulley for stitch by stitch control of sewing speed
Drop-in bobbin system for easy access to the bobbin
Reverse feed to reinforce stitches
Integrated bobbin winder
Knee lifter to raise the presser foot
Safety clutch
Includes Reinforced U-table, motor, tools, LED lamp, instruction manual, accessories
Limited Lifetime Warranty included
Individually inspected and sewn-on prior to shipping
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
- Presser foot clearance: 5/8” (16mm)
- Sewing Capacity: ½” (13mm)
- Needle Bar Stroke: 36mm
- Maximum stitch length: 9mm
- Cylinder arm length: 10.5”
- Cylinder arm diameter: 3” (72mm)
- Needles: 135x17 or 135x16 sizes 18 to 24
- Thread: sizes #46 to #277
- Maximum sewing speed: 2500 SPM
- Hook: Large extra-capacity M hook
- Motor: 750W 110V variable speed SmartServo
TechSew 860 7"H Post Bed Walking Foot Needle Feed Sewing Machine, Servo Motor Power Stand, Needle Positioner, Lamp, Roller Foot, 5/8" Lift, 7mm Length
 TECHSEW 860 POST BED WALKING FOOT INDUSTRIAL SEWING MACHINE |
Our Price: $4,179.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
The Techsew 860 sews light to medium weight materials such as leather, vinyl, synthetics, canvas and various coated and laminated products.
Common applications include the production of shoes, boots, wallets, belts, purses, as well as various other materials. Also used for attaching patches on caps/hats.
The triple feed, compound walking foot feeding mechanism allows for the sewing of multiple layers of leather and bulky materials, and delivers the highest quality results.
The Techsew 860 is also available as a double needle machine (model 860-2).
Features:
Common applications include the production of shoes, boots, wallets, belts, purses, as well as various other materials. Also used for attaching patches on caps/hats.
The triple feed, compound walking foot feeding mechanism allows for the sewing of multiple layers of leather and bulky materials, and delivers the highest quality results.
The Techsew 860 is also available as a double needle machine (model 860-2).
Features:
- Compound walking foot feeding mechanism
- 800W Digital Techsew SmartServo-NP needle position motor
- High presser foot clearance - plenty of space to fit bulky and multi-layered materials beneath the roller foot
- Large extra-capacity bobbin
- Reverse feed lever for back stitching
- Adjustable stitch length
- Easy drop-in large bobbin system
- Includes complete table, SmartServo-NP motor, TS-28 LED lamp, thread stand, bobbin winder, adjustment tools, instruction manual
- Includes Limited Lifetime Warranty and FREE technical support for the life of your machine
- Machine comes inspected, oiled, adjusted and READY TO SEW
Applications:
Shoes, boots, wallets, belts, purses, automobile upholstery, travel bags etc..
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
Specifications:- Sewing Capacity: 3/8"
- Presser foot clearance: 5/8"
- Post-bed height: 7"
- Maximum stitch length: 7mm
- Maximum sewing speed: 2000 RPM
- Semi-automatic lubrication
- Needles: 135x17 #18 to #24
- Thread Sizes: #23 to #138
- Techsew SmartServo-NP Motor: 110V, 800W, 0 to 1800RPM, bright digital LED display, automatic needle up/needle down position, full 1HP Horse Power Motor
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
TechSew 5100FLP Fully Loaded 16.5" Cylinder Bed Walking Foot Heavy Leather Stitcher, 16.5" Arm, 1" Lift, 11mmSL, 12"Wheel, 1HP 750W Servo Motor Stand*
 29033: TechSew 5100FLP 16.5" Cylinder Bed Walking Foot Leather Stitcher, Power Stand |
Our Price: $4,499.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
In Stock! The Techsew 5100FLP on this page and Optional 5100-SE Special Edition Upgrade are excellent heavy duty leather sewing machines designed for leather goods, heavy fabrics, canvas, saddle work, harnesses, belts, holsters and more. Both feature 16.5” long cylinder arm, specialty presser feet for sewing leather and include the 1HP SmartServo motor.
The 5100-SE Special Edition option package includes needle positioning motor, laser straight stitch guide, flatbed table attachment, and swing down roller guide.
Walking Foot Needle Feed Heavy Duty Sewing Machine, Pedastal Stand, 1" Foot Lift, KD is knocked down unassembled pedestal stand, Includes SR Speed Reducer, Organ 7x1 or 794 needles, bobbins and shuttle are interchangeable with Juki 441 or Adler 205. For minimum 5-6oz leather, not any less.
The Techsew 5100 leather stitcher is the ultimate sewing machine for thick and heavy sewing projects such as saddles, holsters, harnesses, bridles, saddle pads, halters, horse blankets, straps, belts and tons of other projects in the medium and heavy thickness range. Additionally, it is capable of sewing a variety of materials such as vinyl, canvas, synthetics, heavy webbing and more.
The 5100 is equipped with the most powerful variable speed motor, the Techsew SmartServo motor, which features 1 HP and 17 different speed settings up to 1800RPM. This revolutionary motor allows the user to sew stitch by stitch if desired while still maintaining enough power and torque to sew through thick materials up to 7/8".
Additionally, a speed reducer is used in combination with the SmartServo motor for added power and speed control. This system is ideal for beginner, intermediate and expert sewers as well.
The 5100-SE Special Edition option package includes needle positioning motor, laser straight stitch guide, flatbed table attachment, and swing down roller guide.
Walking Foot Needle Feed Heavy Duty Sewing Machine, Pedastal Stand, 1" Foot Lift, KD is knocked down unassembled pedestal stand, Includes SR Speed Reducer, Organ 7x1 or 794 needles, bobbins and shuttle are interchangeable with Juki 441 or Adler 205. For minimum 5-6oz leather, not any less.
The Techsew 5100 leather stitcher is the ultimate sewing machine for thick and heavy sewing projects such as saddles, holsters, harnesses, bridles, saddle pads, halters, horse blankets, straps, belts and tons of other projects in the medium and heavy thickness range. Additionally, it is capable of sewing a variety of materials such as vinyl, canvas, synthetics, heavy webbing and more.
The 5100 is equipped with the most powerful variable speed motor, the Techsew SmartServo motor, which features 1 HP and 17 different speed settings up to 1800RPM. This revolutionary motor allows the user to sew stitch by stitch if desired while still maintaining enough power and torque to sew through thick materials up to 7/8".
Additionally, a speed reducer is used in combination with the SmartServo motor for added power and speed control. This system is ideal for beginner, intermediate and expert sewers as well.
- 1" Presser foot clearance
- 7/8" Sewing capacity
- 16.5" Cylinder bed
- Equipped with Techsew SmartServo motor and speed reducer to sew at slow & controlled speeds - great for novice, intermediate and professional sewers
- Reverse stitch - for reinforcing stitches
- 12 inch heavy duty flywheel
- *Reinforced steel pedestal style table with adjustable height (sew standing up or sitting down)
- Includes complete table with casters, motor, speed reducer, needles, bobbins, lamp, oiler, instruction manual, tools, thread clipper, bobbin winder
- Stitch length adjustment up to 11mm
- Uses thread sizes 69 to 415
- Uses needle sizes 18 to 27
- Includes 6 month warranty and FREE Lifetime Technical Support (6 Month Warranty on the Machine, 1 Year Warranty on the Motor)
- Machine comes pre-threaded, oiled, adjusted and READY TO SEW
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
- Heavy duty compound walking foot feeding mechanism
- Sews up to 7/8" material thickness
- 16.5" Long Cylinder Bed
- Accessories package included
- Includes assembled table and 1HP 750W SmartServo motor
- Needle sizes: 18 to 27
- Thread sizes: 69 to 415
- Presser foot clearance: 1"
- Maximum sewing capacity: 7/8"
- Cylinder bed length: 16.5"
- Maximum stitch length: 11mm
- Techsew SmartServo motor: 600W, 1HP, 110V, 0 to 1800RPM, 18 speed settings with bright LED display, completely silent when idle and reduced noise during operation.
Click here for product brochure (.PDF)
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
TechSew 5100 Videos
TechSew 5200 16.5" Flatbed Walking Foot Needle Feed Leather Stitcher Machine, Full 1HP Power Stand, Servo Motor, 1" Foot Lift, 7/8" Sewing Capacity
 86447: TechSew 5200 16.5" Flatbed Walking Foot Needle FeedLeather Stitcher, Power Stand |
Our Price: $4,159.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
The Techsew 5200 leather stitcher is the ultimate sewing machine designed for sewing a wide range of leather products.
Light range leather work: Purses, handbags, pouches, wallets, notebook covers, vests
Medium range leather work: Belts, knife sheaths, scabbards, quivers, horse blankets
Heavy range leather work: Saddles, gun holsters, knife sheaths, harnesses, horse tack
Additionally it is also great for non-leather work applications such as tie down straps, boat/car covers, orthopaedics, thick paper binding, parachute harnesses, tarps, vinyl, canvas, synthetics, heavy webbing and more.
The 5200 is equipped with the most powerful variable speed motor in the industry, the Techsew SmartServo motor, which features 1 HP and 16 different speed settings up to 1800RPM. This motor allows the user to sew stitch by stitch if desired while still maintaining enough power and torque to sew through thick materials up to 7/8".
Additionally, a speed reducer is used in combination with the SmartServo motor for added power and speed control. This system is ideal for beginner, intermediate and expert sewers as well.
Features:
Triple Feed - Walking Foot (needle feed + alternating presser feet + bottom feed)
1" Presser foot clearance
Sews from 6oz all the way up to 7/8" thick
16.5" Throat size
Stainless steel specialty presser feet (left toe foot + double toe foot + center groover foot)
Equipped with Techsew SmartServo motor and speed reducer to sew at slow & controlled speeds - great for novice, intermediate and professional sewers
Reverse stitch - for reinforcing stitches
12 inch heavy duty flywheel
Heavy duty table with K-leg stand
Includes complete table, SmartServo motor, speed reducer,TS-28 LED lamp, 3 pkgs of needles,5 bobbins, thread lube pot, left toe foot, double toe foot, center foot, smooth blanket foot set, 1 lb. (16oz) spool of thread, oiler, instruction manual, repair tools, thread clipper.
Stitch length adjustment up to 11mm (7/16")
Uses thread sizes 69 to 415
Uses needle sizes 18 to 27
FREE setup & instructional DVD included!
Includes Limited Lifetime Warranty and FREE technical support for the life of your machine
Machine comes pre-threaded, oiled, adjusted and READY TO SEW
Light range leather work: Purses, handbags, pouches, wallets, notebook covers, vests
Medium range leather work: Belts, knife sheaths, scabbards, quivers, horse blankets
Heavy range leather work: Saddles, gun holsters, knife sheaths, harnesses, horse tack
Additionally it is also great for non-leather work applications such as tie down straps, boat/car covers, orthopaedics, thick paper binding, parachute harnesses, tarps, vinyl, canvas, synthetics, heavy webbing and more.
The 5200 is equipped with the most powerful variable speed motor in the industry, the Techsew SmartServo motor, which features 1 HP and 16 different speed settings up to 1800RPM. This motor allows the user to sew stitch by stitch if desired while still maintaining enough power and torque to sew through thick materials up to 7/8".
Additionally, a speed reducer is used in combination with the SmartServo motor for added power and speed control. This system is ideal for beginner, intermediate and expert sewers as well.
Features:
Triple Feed - Walking Foot (needle feed + alternating presser feet + bottom feed)
1" Presser foot clearance
Sews from 6oz all the way up to 7/8" thick
16.5" Throat size
Stainless steel specialty presser feet (left toe foot + double toe foot + center groover foot)
Equipped with Techsew SmartServo motor and speed reducer to sew at slow & controlled speeds - great for novice, intermediate and professional sewers
Reverse stitch - for reinforcing stitches
12 inch heavy duty flywheel
Heavy duty table with K-leg stand
Includes complete table, SmartServo motor, speed reducer,TS-28 LED lamp, 3 pkgs of needles,5 bobbins, thread lube pot, left toe foot, double toe foot, center foot, smooth blanket foot set, 1 lb. (16oz) spool of thread, oiler, instruction manual, repair tools, thread clipper.
Stitch length adjustment up to 11mm (7/16")
Uses thread sizes 69 to 415
Uses needle sizes 18 to 27
FREE setup & instructional DVD included!
Includes Limited Lifetime Warranty and FREE technical support for the life of your machine
Machine comes pre-threaded, oiled, adjusted and READY TO SEW
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
Needle sizes: 18 to 27
Thread sizes: 69 to 415
Presser foot clearance: 1"
Sewing capacity: 5oz to 7/8" thick
Throat size: 16.5"
Maximum stitch length: 11mm
Techsew SmartServo motor: 800W, 1HP, 110V, 300 to 1800RPM, 16 speed settings with bright LED display, completely silent when idle and reduced noise during operation.
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Techsew 4800PRO Cylinder Walking Foot Needle Feed Sewing Machine, Ustand, Laser & Roller Edge Guides, Adj Climb Foot, Flatbed Table, Needle Positioner
 Techsew 4800PRO Cylinder Walking Foot Needle Feed Sewing Machine, Ustand, Laser & Roller Edge Guides, Adj Climb Foot, Flatbed Table, Needle Positioner |
Our Price: $4,399.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 weeks Condition: New In Box |
Features
In Stock! Leather Sewing Machine for Light to Heavy Weights, 750W 110V Smart Servo Motor, 2500SPM, Safety Clutch, Speed Reducer, 5/8" Lift, DropIn M Bobbin, Knee Lift, 9mm Stitch Length
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
The Techsew 4800 PRO is designed for sewing a broad range of leather goods including bags, belts, wallets, upholstery, saddle bags, satchels and more. It is also suitable for sewing nylon webbing, canvas, denim, heavy fabrics and synthetics. With its higher presser foot clearance, newly adopted dual-tension control, adjustable presser foot climbing mechanism and larger thread size capability, the 4800 PRO offers increased work efficiency along with the highest seam quality for fine leather products.
PRO PACKAGE INCLUDES:
Automatic Needle Position System – designed for improved efficiency, the SmartServo-NP motor will automatically stop the needle in the down position when the operation pedal is released, thus allowing the operator to more easily turn the product to sew a 90-degree corner
Laser Guide – the laser line facilitates the sewing of straight lines and aligning rows of stitches
Swing Down Roller Edge Guide – adjustable and easy to swing up and out of the way, the roller edge guide helps to feed the material in a straight line thus improving stitch accuracy
Flatbed Table Attachment – the attachment fits directly over the cylinder arm, converting it to a flatbed machine to facilitate sewing of flat products such as wallets and belts
Speed Reducer Pulley – The speed reducer pulley is installed in combination with the variable speed Servo motor, further reducing the sewing speed from a minimum of approximately 2 stitches per second to less than 1 stitch per second
Accessories Package – an accessories package comprising of 1 spool of size #69 bonde
MACHINE FEATURES:
Compound walking foot feeding mechanism
Large extra-capacity hook (M-style bobbin)
Dual-tension control for more precise thread tension
Adjustable presser foot climbing mechanism helps maintain consistent stitch length on uneven materials
Includes variable speed SmartServo motor and speed reducer pulley for stitch by stitch control of sewing speed
Drop-in bobbin system for easy access to the bobbin
Reverse feed to reinforce stitches
Integrated bobbin winder
Knee lifter to raise the presser foot
Safety clutch
Includes Reinforced U-table, motor, tools, LED lamp, instruction manual, accessories
Limited Lifetime Warranty included
Individually inspected and sewn-on prior to shipping
• Compound walking-foot feeding mechanism - Sews up to 1/2" thick leather
• 10" Cylinder arm
• Large, extra-capacity bobbin
• Uses thread sizes #46 to #277
• Dual tension control
• Adjustable presser foot climbing mechanism
• Integrated bobbin winder
• Includes assembled table & adjustable speed SmartServo motor
The Techsew 4800 is designed for sewing a broad range of leather goods including bags, belts, wallets, upholstery, saddle bags, satchels and more. It is also suitable for sewing nylon webbing, canvas, denim, heavy fabrics and synthetics.
With its higher presser foot clearance, newly adopted dual-tension control, adjustable presser foot climbing mechanism and larger thread size capability, the 4800 offers increased work efficiency along with the highest seam quality for fine leather products.
APPLICATIONS:
Light to heavy-weight leather (1-2oz to ½” maximum thickness)
Light to medium weight nylon webbing
Medium to heavy weight canvas, denim, fabrics, synthetic materials
MACHINE FEATURES:
Compound walking foot feeding mechanism
Large extra-capacity hook (M-style bobbin)
Dual-tension control for more precise thread tension
Adjustable presser foot climbing mechanism helps maintain consistent stitch length on uneven materials
Includes variable speed SmartServo motor and speed reducer pulley for stitch by stitch control of sewing speed
Drop-in bobbin system for easy access to the bobbin
Reverse feed to reinforce stitches
Integrated bobbin winder
Knee lifter to raise the presser foot
Safety clutch
Includes Reinforced U-table, motor, tools, LED lamp, instruction manual, accessories
Limited Lifetime Warranty included
Individually inspected and sewn-on prior to shipping
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
The Techsew 4800 PRO is designed for sewing a broad range of leather goods including bags, belts, wallets, upholstery, saddle bags, satchels and more. It is also suitable for sewing nylon webbing, canvas, denim, heavy fabrics and synthetics. With its higher presser foot clearance, newly adopted dual-tension control, adjustable presser foot climbing mechanism and larger thread size capability, the 4800 PRO offers increased work efficiency along with the highest seam quality for fine leather products.
PRO PACKAGE INCLUDES:
Automatic Needle Position System – designed for improved efficiency, the SmartServo-NP motor will automatically stop the needle in the down position when the operation pedal is released, thus allowing the operator to more easily turn the product to sew a 90-degree corner
Laser Guide – the laser line facilitates the sewing of straight lines and aligning rows of stitches
Swing Down Roller Edge Guide – adjustable and easy to swing up and out of the way, the roller edge guide helps to feed the material in a straight line thus improving stitch accuracy
Flatbed Table Attachment – the attachment fits directly over the cylinder arm, converting it to a flatbed machine to facilitate sewing of flat products such as wallets and belts
Speed Reducer Pulley – The speed reducer pulley is installed in combination with the variable speed Servo motor, further reducing the sewing speed from a minimum of approximately 2 stitches per second to less than 1 stitch per second
Accessories Package – an accessories package comprising of 1 spool of size #69 bonde
MACHINE FEATURES:
Compound walking foot feeding mechanism
Large extra-capacity hook (M-style bobbin)
Dual-tension control for more precise thread tension
Adjustable presser foot climbing mechanism helps maintain consistent stitch length on uneven materials
Includes variable speed SmartServo motor and speed reducer pulley for stitch by stitch control of sewing speed
Drop-in bobbin system for easy access to the bobbin
Reverse feed to reinforce stitches
Integrated bobbin winder
Knee lifter to raise the presser foot
Safety clutch
Includes Reinforced U-table, motor, tools, LED lamp, instruction manual, accessories
Limited Lifetime Warranty included
Individually inspected and sewn-on prior to shipping
• Compound walking-foot feeding mechanism - Sews up to 1/2" thick leather
• 10" Cylinder arm
• Large, extra-capacity bobbin
• Uses thread sizes #46 to #277
• Dual tension control
• Adjustable presser foot climbing mechanism
• Integrated bobbin winder
• Includes assembled table & adjustable speed SmartServo motor
The Techsew 4800 is designed for sewing a broad range of leather goods including bags, belts, wallets, upholstery, saddle bags, satchels and more. It is also suitable for sewing nylon webbing, canvas, denim, heavy fabrics and synthetics.
With its higher presser foot clearance, newly adopted dual-tension control, adjustable presser foot climbing mechanism and larger thread size capability, the 4800 offers increased work efficiency along with the highest seam quality for fine leather products.
APPLICATIONS:
Light to heavy-weight leather (1-2oz to ½” maximum thickness)
Light to medium weight nylon webbing
Medium to heavy weight canvas, denim, fabrics, synthetic materials
MACHINE FEATURES:
Compound walking foot feeding mechanism
Large extra-capacity hook (M-style bobbin)
Dual-tension control for more precise thread tension
Adjustable presser foot climbing mechanism helps maintain consistent stitch length on uneven materials
Includes variable speed SmartServo motor and speed reducer pulley for stitch by stitch control of sewing speed
Drop-in bobbin system for easy access to the bobbin
Reverse feed to reinforce stitches
Integrated bobbin winder
Knee lifter to raise the presser foot
Safety clutch
Includes Reinforced U-table, motor, tools, LED lamp, instruction manual, accessories
Limited Lifetime Warranty included
Individually inspected and sewn-on prior to shipping
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
MACHINE SPECIFICATIONS:Presser foot clearance: 5/8” (16mm)
Sewing Capacity: ½” (13mm)
Needle Bar Stroke: 36mm
Maximum stitch length: 9mm
Cylinder arm length: 10.5”
Cylinder arm diameter: 3” (72mm)
Needles: 135x17 or 135x16 sizes 18 to 24
Thread: sizes #46 to #277
Maximum sewing speed: 2500 SPM
Hook: Large extra-capacity hook
Motor: 750W 110V variable speed SmartServo needle position motor
- Presser foot clearance: 5/8” (16mm)
- Sewing Capacity: ½” (13mm)
- Needle Bar Stroke: 36mm
- Maximum stitch length: 9mm
- Cylinder arm length: 10.5”
- Cylinder arm diameter: 3” (72mm)
- Needles: 135x17 or 135x16 sizes 18 to 24
- Thread: sizes #46 to #277
- Maximum sewing speed: 2500 SPM
- Hook: Large extra-capacity M hook
- Motor: 750W 110V variable speed SmartServo
Consew 345-3 Feed Off The Arm 2-3 Needle Chainstitch Lap Seam Felling Ind Sewing Machine, 6SPI, 3600SPM, 5/16" FootLift, Space Saver Servo Motor Stand
 1429: Consew 345-3 High Speed Feed Off The Arm 2-3 Needle Chainstitch Machine/Space Saver Stand |
Our Price: $4,219.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 6-8 weeks. Condition: New In Box |
Features
- This is a special order machine. Delivery is around 60 days. Non-cancellable and non-returnable.
- 3600 Stitches per Minute
- 5/16" Clearance Under Foot
- 1 5/16" Needle Bar Stroke
- Max Stitch Length 6 spi
- 2 and 3 Needles
- For sewing light to heavy weight materials
- Suitable for stitching shirts, sleep wear, jeans, pants, skirts, uniforms, heavy overalls, raincoats and other similar products
- Designed for any lap seam felling operation including difficult-to-sew tubular products
- Fully automatic lubrication
- Chain cutter
- Cylinder arm allows for lap seam felling on narrow openings
- Presser bar lift - can be controlled by knee lifter or foot pedal
- Screw adjust stitch regulator
APPLICATIONS:
For sewing light to heavy weight materials
Suitable for stitching shirts, sleep-wear, jeans, pants, skirts, uniforms, heavy overalls, raincoats and other similar products
Designed for any lap seam felling operation including difficult-to-sew tubular products
FEATURES:
Fully automatic lubrication
Chain cutter
Cylinder arm allows for lap seam felling on narrow openings
Presserbar lift – can be controlled by knee lifter or foot pedal
Screw adjust stitch regulator
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Maximum Sewing Speed 3600 spmStitch Length Max 6s.p.i.(4 mm)
Presser Foot Lift 5/16" (8 mm)
Needle System 149x5
Needle Bar Stroke 1 5/16" (33.4 mm)
Cylinder Diameter at needle Bar 1 23/32 (53.5mm)
Clearence to Right or Needle 8"(203mm)
Stitch Tipe 401
Needle Distances:
2 Needle: 3/16" (4.8mm) | 3/16" (4.8mm)
2 Needle: 1/4" (6.4mm) | 1/4" (6.4mm)
3 Needle: 1/8" x 1/8" (6.4mm) | 1/8" x 1/8" (6.4mm)
Speed depends on thread, material, set-up and operation.
Screw adjust stitch regulator
SPECIFICATIONS:
Number of Needles 3 (Three)
Feeding Mechanism Drop Feed
Workspace Standard Workspace
Standard or Full Function Standard Functions
Speed, Max (S.P.M.) 3600
Clearance Under Presser Foot 5/16" (8mm)
Stitch Length 6 s.p.i. (4mm)
Needle 149x5
Stitch Type 401
Needle Bar Stroke 1 5/16" (33.4mm)
Cylinder Diameter 1 23/32" (53.5mm)
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki LZH-1290 1-Needle, Lockstitch, 8mm Zigzag Stitching Machine with Large Hook, Assembled Power Stand, Servo Motor
 33048: Juki LZH-1290 1-Needle, Lockstitch, Zigzag Stitching Machine, Power Stand |
Our Price: $4,699.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
- With its newly incorporated triangular cam, the machine uniformly tenses thread in zigzag strokes regardless of the needle position, and the needle always enters the material at right angles. This prevents the needle from swaying during zigzag stitching.
- The machine offers outstanding capabilities for the sewing of sports shoes and leather shoes that require a wider zigzag width. The zigzag width can be quickly and easily adjusted by the dial mounted on the front face of the machine.
- To ensure smooth sewing of heavy materials, the lift of the presser foot is as high as 14mm.
- By reducing the frequency of bobbin thread replacement, the newly introduced horizontal-axis double-capacity hook contributes to increased efficiency in sewing. This feature is extremely helpful when sewing with thick thread.
- Ships assembled with power stand
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki LZH-12901-needle, Lockstitch, Zigzag Stitching Machine with Large Hook.
- Max sewing speed: 2,000rpm
- Max stitch length: 6mm
- Zigzag width: Max. 8mm (adjustable to 10mm)
- Zigzag width adjustment method: by dial
- SY1906 (Nm100) Nm90～Nm110
- Needle bar stroke: 35mm
- Presser foot lift: 6mm by hand, 14mm by knee
- Thread take-up: Link type
- Hook: Horizontal-axis full-rotary double-capacity hook
- Needle: SY1906 (Nm100) Nm90～Nm110
- Thread: #50～#8, B33～B92, Nm=120/3～30/3
- Lubrication: By an oiler (hook: automatic)
- Lubricating oil: JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
- Distance from needle to machine arm: 295mm
- Bed size: 477mm x 178mm
- Weight of machine head: 35kg
Please review our Freight LTL shipping Policies
Juki LU-1510N-7 Walking Foot Needle Feed Industrial Sewing Machine with Assembled Power Stand
 41346: Juki LU-1510N-7 Walking Foot Needle Feed Industrial Sewing Machine/Stand |
Our Price: $5,499.95 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
This one-needle machine with a thread trimmer utilizes a basic performance which matches best to the sewing of medium to heavy materials. The machine's rectangular feeding motion promises the consistent feeding of materials of all thicknesses without stitch gathering. Ideal for car seat manufacturers, upholstery shops, and other contractors that need to use automation and speed in the manufacturing process
- Auto Thread Trim
- Auto Foot Lift
- Auto Back Tack
- Needle Positioner
Click HERE for Brochure on Juki LU-1510N-7 Walking Foot Needle Feed Sewing Machine
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Max. sewing speed 3,000sti/min 2,500sti/minMax. stitch length 9mm
Presser foot Auto: 16mm By knee: 16mm
Alternating vertical
movement 1～6.5mm 2.5～6.5mm
Needle 135×17 (Nm160) Nm125～Nm180
Thread #30～#5, B46～B138, Nm=60/3～20/3
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Juki Warranty Information
Juki LU-2810-7X Unison Feed Compound Walking Foot Automatic Backtack, Thread Trim, Foot Lift with 3fold Hook Industrial Sewing Machine/Assembled Stand
 Juki LU-2810-7X Unison Compound Walking Foot Automatic Backtack, Thread Trim, Foot Lift with 3-fold Hook Industrial Sewing Machine/Assembled Stand |
Our Price: $5,999.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
A high and long arm has been adopted. The long-distance from the machine arm to the needle contributes to improved workability. The LU-2800 Series is a unison-feed, compound-feed, walking foot machine, lockstitch machine with a vertical-axis large hook which is provided with substantially improved functions and performance.
Functions for improving seam quality and workability
The long-distance from the machine arm to the needle contributes to improved workability.
Double tension provided as: standard
Single or Double can be set easily through a Multi-functional 6-string switch, regarding the machine with the trimmer. (Available for more thick material)
Multi-functional 6-string switch (thread trimming switch)
In addition to the one-touch type reverse feed switch, a multi-functional 6-string switch is also provided. Changeover of the amount of the alternating vertical movement of the walking foot and the presser foot and changeover of the stitch length can be done simply with this one switch.
Walking-foot/presser-foot alternating vertical movement mechanism
The sewing machine has adopted a feed mechanism that keeps the ratio between the amount of the vertical movement of the walking foot and that of the presser foot constant even when the material is changed. The amount of the alternating vertical movement of the walking foot and the presser foot is 9 mm at the maximum. This amount can be set with ease by means of the large dial installed on the upper section of the sewing machine.
Higher lift of the presser bar
A presser bar height of 20 mm is achieved when using the automatic presser bar lifting lever. Thanks to this feature, the process of joining leather and Eccentricity of the feed driving cam is adjustable.
Adjustment of the eccentricity of the feed driving cam has been enabled. As a result, the sewing machine is able to perform sewing with the feed that is best suited to the material and thread used. It is no longer necessary to prepare other subclass model sewing machines.
New lubrication system
Lubrication system is powerful and stable even low speed.
New bobbin thread spool device
New bobbin thread spool device is no necessity of rolling thread manually.
Stitch length can be changed over among different lengths
The sewing machine with a thread trimmer is provided as standard with a 2-pitch dial. One unit of this sewing machine is able to sew different sewing lengths since the sewing length can be instantaneously changed over.
2.0 / 2.7 fold-capacity hook
The hook can be adjusted with a screw amount of needle guard contact to the needle. The needle guard can be easily adjusted. Therefore, it prevents stitch skipping and wear of hook edge.
High-torque direct-drive motor is installed
The sewing machine provided with a thread trimmer has adopted a high-torque direct-drive motor which is suitable for heavy-weight materials. As a result, the sewing machine is excellent at its responsiveness and ensures increased penetration into the material even when sewing multi-layered parts. The direct-drive motor system has been adopted by all of the sewing machines with a thread trimmer. As a result, the sewing machine starts up swiftly and promises increased stop accuracy, thereby demonstrating improved responsiveness. In addition, the machine is no longer provided with a V-belt. This means that the adoption of the direct-drive motor is also effective in the elimination of belt shavings. Power is directly transmitted from the motor to the sewing machine, thereby contributing to reduced power consumption. (This sewing machine reduces power consumption by 37% as compared with the conventional models.) Adoption of a direct-driven main shaft and a revamping of mechanism design contribute to remarkably reduced noise. Noise has been reduced by 3.5dB as compared with the conventional model to produce this operator-friendly machine.
New-type tank-style automatic lubrication mechanism has been adopted
The oil dropped from the hook and its surrounding sections into the under-cover is filtered to remove dirt and dust and is then returned to the oil tank. This method saves the effort of oiling and reduces oil consumption. The remaining oil quantity indicator is provided on the front face of the machine head. Lubrication can be carried out without tilting the machine head.
Functions for improving seam quality and workability
The long-distance from the machine arm to the needle contributes to improved workability.
Double tension provided as: standard
Single or Double can be set easily through a Multi-functional 6-string switch, regarding the machine with the trimmer. (Available for more thick material)
Multi-functional 6-string switch (thread trimming switch)
In addition to the one-touch type reverse feed switch, a multi-functional 6-string switch is also provided. Changeover of the amount of the alternating vertical movement of the walking foot and the presser foot and changeover of the stitch length can be done simply with this one switch.
Walking-foot/presser-foot alternating vertical movement mechanism
The sewing machine has adopted a feed mechanism that keeps the ratio between the amount of the vertical movement of the walking foot and that of the presser foot constant even when the material is changed. The amount of the alternating vertical movement of the walking foot and the presser foot is 9 mm at the maximum. This amount can be set with ease by means of the large dial installed on the upper section of the sewing machine.
Higher lift of the presser bar
A presser bar height of 20 mm is achieved when using the automatic presser bar lifting lever. Thanks to this feature, the process of joining leather and Eccentricity of the feed driving cam is adjustable.
Adjustment of the eccentricity of the feed driving cam has been enabled. As a result, the sewing machine is able to perform sewing with the feed that is best suited to the material and thread used. It is no longer necessary to prepare other subclass model sewing machines.
New lubrication system
Lubrication system is powerful and stable even low speed.
New bobbin thread spool device
New bobbin thread spool device is no necessity of rolling thread manually.
Stitch length can be changed over among different lengths
The sewing machine with a thread trimmer is provided as standard with a 2-pitch dial. One unit of this sewing machine is able to sew different sewing lengths since the sewing length can be instantaneously changed over.
2.0 / 2.7 fold-capacity hook
The hook can be adjusted with a screw amount of needle guard contact to the needle. The needle guard can be easily adjusted. Therefore, it prevents stitch skipping and wear of hook edge.
High-torque direct-drive motor is installed
The sewing machine provided with a thread trimmer has adopted a high-torque direct-drive motor which is suitable for heavy-weight materials. As a result, the sewing machine is excellent at its responsiveness and ensures increased penetration into the material even when sewing multi-layered parts. The direct-drive motor system has been adopted by all of the sewing machines with a thread trimmer. As a result, the sewing machine starts up swiftly and promises increased stop accuracy, thereby demonstrating improved responsiveness. In addition, the machine is no longer provided with a V-belt. This means that the adoption of the direct-drive motor is also effective in the elimination of belt shavings. Power is directly transmitted from the motor to the sewing machine, thereby contributing to reduced power consumption. (This sewing machine reduces power consumption by 37% as compared with the conventional models.) Adoption of a direct-driven main shaft and a revamping of mechanism design contribute to remarkably reduced noise. Noise has been reduced by 3.5dB as compared with the conventional model to produce this operator-friendly machine.
New-type tank-style automatic lubrication mechanism has been adopted
The oil dropped from the hook and its surrounding sections into the under-cover is filtered to remove dirt and dust and is then returned to the oil tank. This method saves the effort of oiling and reduces oil consumption. The remaining oil quantity indicator is provided on the front face of the machine head. Lubrication can be carried out without tilting the machine head.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Type: 1-needle with automatic thread trimmerMax. sewing speed: 3,000sti/min
Max. stitch length: 9mm
Stitch length dial: 2 pitch dial
Presser foot: Auto: 20mm, By hand: 10mm
Auto lifter: Provide as standard
Needle thread tension: Single/Double-tension
Hook: Vertical axis 2 fold-capacity hook
Needle: 135×17 Nm160 (Nm125
- Nm180)
Thread: #30 - #5, B46
- B138, Nm=60/3
- 20/3
Lubrication: Semi-dry head automatic (Tank system)
Juki LU-2810A 1 Needle Unison Feed, Compound Walking Foot, 3-fold Capacity Hook, Non Electronic Industrial Sewing Machine, Direct Drive Motor, Stand
110328: Juki LU-2810A 1 Needle Unison Feed, Compound Walking Foot, 3-fold Capacity Hook, Non Electronic Industrial Sewing Machine, Direct Drive Motor, Stand |
Our Price: $3,999.95 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
A high and long arm has been adopted. The long-distance from the machine arm to the needle contributes to improved workability. The LU-2800 Series is a unison-feed, compound-feed, walking foot machine, lockstitch machine with a vertical-axis large hook which is provided with substantially improved functions and performance.
Functions for improving seam quality and workability
The long-distance from the machine arm to the needle contributes to improved workability.
Double tension provided as: standard
Single or Double can be set (Available for more thick material)
Walking-foot/presser-foot alternating vertical movement mechanism
The sewing machine has adopted a feed mechanism that keeps the ratio between the amount of the vertical movement of the walking foot and that of the presser foot constant even when the material is changed. The amount of the alternating vertical movement of the walking foot and the presser foot is 9 mm at the maximum. This amount can be set with ease by means of the large dial installed on the upper section of the sewing machine.
Higher lift of the presser bar
A presser bar height of 20 mm is achieved Thanks to this feature, the process of joining leather and Eccentricity of the feed driving cam is adjustable..
New lubrication system
Lubrication system is powerful and stable even low speed.
New bobbin thread spool device
New bobbin thread spool device is no necessity of rolling thread manually.
Stitch length can be changed over among different lengths One unit of this sewing machine is able to sew different sewing lengths since the sewing length can be instantaneously changed over.
2.0 / 2.7 fold-capacity hook
The hook can be adjusted with a screw amount of needle guard contact to the needle. The needle guard can be easily adjusted. Therefore, it prevents stitch skipping and wear of hook edge.
New-type tank-style automatic lubrication mechanism has been adopted
The oil dropped from the hook and its surrounding sections into the under-cover is filtered to remove dirt and dust and is then returned to the oil tank. This method saves the effort of oiling and reduces oil consumption. The remaining oil quantity indicator is provided on the front face of the machine head. Lubrication can be carried out without tilting the machine head.
Functions for improving seam quality and workability
The long-distance from the machine arm to the needle contributes to improved workability.
Double tension provided as: standard
Single or Double can be set (Available for more thick material)
Walking-foot/presser-foot alternating vertical movement mechanism
The sewing machine has adopted a feed mechanism that keeps the ratio between the amount of the vertical movement of the walking foot and that of the presser foot constant even when the material is changed. The amount of the alternating vertical movement of the walking foot and the presser foot is 9 mm at the maximum. This amount can be set with ease by means of the large dial installed on the upper section of the sewing machine.
Higher lift of the presser bar
A presser bar height of 20 mm is achieved Thanks to this feature, the process of joining leather and Eccentricity of the feed driving cam is adjustable..
New lubrication system
Lubrication system is powerful and stable even low speed.
New bobbin thread spool device
New bobbin thread spool device is no necessity of rolling thread manually.
Stitch length can be changed over among different lengths One unit of this sewing machine is able to sew different sewing lengths since the sewing length can be instantaneously changed over.
2.0 / 2.7 fold-capacity hook
The hook can be adjusted with a screw amount of needle guard contact to the needle. The needle guard can be easily adjusted. Therefore, it prevents stitch skipping and wear of hook edge.
New-type tank-style automatic lubrication mechanism has been adopted
The oil dropped from the hook and its surrounding sections into the under-cover is filtered to remove dirt and dust and is then returned to the oil tank. This method saves the effort of oiling and reduces oil consumption. The remaining oil quantity indicator is provided on the front face of the machine head. Lubrication can be carried out without tilting the machine head.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Type: 1-needleMax. sewing speed: 3,000sti/min
Max. stitch length: 9mm
Stitch length dial: 1 pitch dial
Presser foot: Auto: 20mm, By hand: 10mm
Auto lifter: Option
Needle thread tension: Double-tension
Hook: Vertical axis 2 fold-capacity hook
Needle: 135×17 Nm160 (Nm125
- Nm180)
Thread: #30 - #5, B46
- B138, Nm=60/3
- 20/3
Lubrication: Semi-dry head automatic (Tank system)
Juki TL-15 Mid-Arm Quilting and Piecing Machine with Automatic Thread Trimmer and Speed Control
 Juki TL-15 Mid-Arm Quilting and Piecing Machine with Automatic Thread Trimmer and Speed Control |
Our Price: $1,199.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
The JUKI TL-15 is a high-performance sewing and quilting machine. Continuing the TL straight-stitch sewing machine legacy, the TL-15 is packed with features to ensure industrial-quality sewing. These features include a drop feed for free motion sewing, an industrial subtension system for perfectly straight stitches, a variable speed control slider, a large work area, and six presser feet.
In addition, the TL-15 has a large work area of up to 23 inches (with an auxiliary table attached), the TL-15 can handle large quilts, handbag making, or home décor projects with ease. Experience this workhorse sewing machine today! Create quilts, home décor, apparel, and handbags with excellent stitch quality every time while the speed that the TL-15 offers!
Scroll down for a full list of features, specifications, and standard accessories.
The Machine is Light-Weight and Portable
This portable, lightweight machine is easy to transport and can be carried wherever you desire.
Needles
The machine is supplied with HA-type needles, the identical type used with home sewing machines and home sergers. This type of needle cannot be attached incorrectly.
Industrial Machine Engineering
The arm and bed if the TL-15 are constructed of aluminum die-casting. This a tough body lowers vibration while sewing and ensures high quality stitching. Since the TL-15 has many industrial sewing machine features, it is possible to attach several types of industrial presser feet.
Larger Work Area
The machine has a wider handling area than a conventional sewing machine adding space to maneuver large size materials or rolls of quilting fabric. An auxiliary table is supplied for extending the work area for quilting and larger sewing projects.
Foot Controller with thread trimming function
It is possible to automatically trim both needle and bobbin threads by pressing the heel side of foot controller. The foot controller is big enough and it is easy to control sewing-start and -stop.
LED Light
LED light brightens the needle area for better material handling.
Sub Tension Unit
Even if strongly twisted thread should be used, the unit will avoid "return of twist of thread" and supply needle thread to the main tension until without thread quivering. It helps sewers create stitches with stable thread tension.
Maximum Sewing Speed Control
Now you can control Maximum sewing speed within the range from 200 to 1,500 SPM with the slide knob. This is ideal for free motion quilting or when a fixed sewing speed is required for your sewing techniques.
Predetermined Stop Position of the Needle
When you stop sewing, the machine will come to an accurate stop with the needle down. To move the needle up or down as desired, simply press the needle up/down button. When the button is pressed continuously, the machines sews stitch by stich at low speed.
Knee Lifter Lever
The knee lifter lever allows you to lift/lower the presser foot without using your hands. The presser foot can be raised as high as 12mm, so that light to heavy weight materials are easily handled in and out of the sewing area with ease.
Drop Feed
The feed dog can be raised and lowered simply by depressing a switch. When quilting, the drop feed allows you to sew curved stitches with ease.
Automatic Thread Trimmer
The machine is equipped with an automatic thread trimming device that simultaneously trims the needle and bobbin threads at the sewing end by lightly pressing the push-button. It uses the thread trimming mechanism that is similar to the industrial sewing machine type, trimming thin through thick threads without fail. Auto thread trimming may also be activated by the foot controller.
Even Feed Foot
With its reliable feed, the even feed foot ensures the machine's ability to produce beautiful seams when sewing difficult-to-feed fabrics such as georgette and velvet, as well as heavy weight materials such as leather. The even feed foot is ideal for sewing multiple layers of fabric evenly.
Heavy-Weight Materials are sewn with Ease
The speed control mechanism, operated by microcomputer, allows the machine to sew materials at low speeds. This provides for accurate feed and perfect stitching when sewing heavy weight fabrics, quilting and multiple layers of materials.
Automatic Needle Threader
The push lever automatic needle threader easily threads the needle without eyestrain and allows you to start sewing quickly.
Thread Tension Scale
The machine is provided with the thread tension scale, which allows you to adjust the tension according to the thread and material to be used. Stitch length is easily adjusted with a dial.
Easy Bobbin Replacement
A new bobbin case latch and an enlarged bobbin case area make it easier to remove and replace the bobbin. When the auxiliary table is being utilized, it is equipped with a sliding plate that allows convenient access to remove and load bobbins as well.
Adjustment of Presser Foot Pressure
Presser foot pressure can be adjusted according to the fabric being sewn by turning a regulator located on the top of the machine. The pressure amount can then be viewed at a pressure indicator.
In addition, the TL-15 has a large work area of up to 23 inches (with an auxiliary table attached), the TL-15 can handle large quilts, handbag making, or home décor projects with ease. Experience this workhorse sewing machine today! Create quilts, home décor, apparel, and handbags with excellent stitch quality every time while the speed that the TL-15 offers!
Scroll down for a full list of features, specifications, and standard accessories.
The Machine is Light-Weight and Portable
This portable, lightweight machine is easy to transport and can be carried wherever you desire.
Needles
The machine is supplied with HA-type needles, the identical type used with home sewing machines and home sergers. This type of needle cannot be attached incorrectly.
Industrial Machine Engineering
The arm and bed if the TL-15 are constructed of aluminum die-casting. This a tough body lowers vibration while sewing and ensures high quality stitching. Since the TL-15 has many industrial sewing machine features, it is possible to attach several types of industrial presser feet.
Larger Work Area
The machine has a wider handling area than a conventional sewing machine adding space to maneuver large size materials or rolls of quilting fabric. An auxiliary table is supplied for extending the work area for quilting and larger sewing projects.
Foot Controller with thread trimming function
It is possible to automatically trim both needle and bobbin threads by pressing the heel side of foot controller. The foot controller is big enough and it is easy to control sewing-start and -stop.
LED Light
LED light brightens the needle area for better material handling.
Sub Tension Unit
Even if strongly twisted thread should be used, the unit will avoid "return of twist of thread" and supply needle thread to the main tension until without thread quivering. It helps sewers create stitches with stable thread tension.
Maximum Sewing Speed Control
Now you can control Maximum sewing speed within the range from 200 to 1,500 SPM with the slide knob. This is ideal for free motion quilting or when a fixed sewing speed is required for your sewing techniques.
Predetermined Stop Position of the Needle
When you stop sewing, the machine will come to an accurate stop with the needle down. To move the needle up or down as desired, simply press the needle up/down button. When the button is pressed continuously, the machines sews stitch by stich at low speed.
Knee Lifter Lever
The knee lifter lever allows you to lift/lower the presser foot without using your hands. The presser foot can be raised as high as 12mm, so that light to heavy weight materials are easily handled in and out of the sewing area with ease.
Drop Feed
The feed dog can be raised and lowered simply by depressing a switch. When quilting, the drop feed allows you to sew curved stitches with ease.
Automatic Thread Trimmer
The machine is equipped with an automatic thread trimming device that simultaneously trims the needle and bobbin threads at the sewing end by lightly pressing the push-button. It uses the thread trimming mechanism that is similar to the industrial sewing machine type, trimming thin through thick threads without fail. Auto thread trimming may also be activated by the foot controller.
Even Feed Foot
With its reliable feed, the even feed foot ensures the machine's ability to produce beautiful seams when sewing difficult-to-feed fabrics such as georgette and velvet, as well as heavy weight materials such as leather. The even feed foot is ideal for sewing multiple layers of fabric evenly.
Heavy-Weight Materials are sewn with Ease
The speed control mechanism, operated by microcomputer, allows the machine to sew materials at low speeds. This provides for accurate feed and perfect stitching when sewing heavy weight fabrics, quilting and multiple layers of materials.
Automatic Needle Threader
The push lever automatic needle threader easily threads the needle without eyestrain and allows you to start sewing quickly.
Thread Tension Scale
The machine is provided with the thread tension scale, which allows you to adjust the tension according to the thread and material to be used. Stitch length is easily adjusted with a dial.
Easy Bobbin Replacement
A new bobbin case latch and an enlarged bobbin case area make it easier to remove and replace the bobbin. When the auxiliary table is being utilized, it is equipped with a sliding plate that allows convenient access to remove and load bobbins as well.
Adjustment of Presser Foot Pressure
Presser foot pressure can be adjusted according to the fabric being sewn by turning a regulator located on the top of the machine. The pressure amount can then be viewed at a pressure indicator.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki TL Comparison Chart- Sewing Speed: 1,500 spm
- Stitch Length: Max. 6mm
- Presser Foot Lift: By lever 9mm max. By knee lift 12mm max.
- Needle Type: HAx1 (130/705H) #7
- #16, HLx5 #9
- #16
- Dimension: 17.75" (W) X 13.75 (H) x 8.6" (D)
- Weight: 25.4lbs
- Auxiliary Table Dimension: 23.25" x 13"
- Hook: Horizontal-Axis Full-Rotary Hook
- Straight Stitch Only
- Adjustable Foot Pressure: Yes
- Bobbin Type: "L" Style
- Shank Type: High Shank
Juki LK-1900BNHS Bartacking Sewing Machine, Thread Trim, Foot Lift, 30x40mm Pattern, 14mm Clamp Lift, No Oil, Direct Drive, Stand, ServoMotor 3200SPM
 |
Our Price: $6,499.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
LK-1900B-SS
The machine achieves sewing speed of 3,200sti/min. The machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time.
The machine achieves sewing speed of 3,200sti/min. The machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time.
- Electronic Bartacking Machine
- 3200 Stitches Per Minute
- Industrial Sewing Machine
- The machine achieves the world's highest sewing speed of 3,000rpm
- In addition to the high-speed sewing performance, the machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time
- The machine comes with a newly developed needle thread grasping mechanism
- The mechanism prevents thread from slipping off from the needle eyelet at the beginning of sewing, from tangling on the wrong side of the material and also being stained during sewing
- The thread trimming mechanism has been further improved to shorten the length of thread remaining on the wrong side of the material after thread trimming
- With its 30mm (length) by 40mm (width) sewing area, the machine can sew many different shapes of bartacks
- The machine is provided as standard with as many as 50 different types of sewing patterns including semilunar bartacking, round bartacking, radial tacking as well as conventional bartacks
- Thanks to our advanced dry-head technology, the frame (needle bar and thread take-up) no longer requires lubrication. This prevents the material from being stained with lubricating oil
- Just a small quantity of just clean oil is supplied from the oil tank to the hook
- The machine is provided as standard with an auto-lifter that uses a new stepping-motor system. This helps reduce operator fatigue
- It is also possible to change over the stroke of the auto-lifter from a one-step stroke to a double-step stroke, which offers easier positioning of a material on the machine
- For the double-step stroke, an intermediate stopping height can be established on the operation panel
- The presser foot lift can be set to a maximum of 17mm by using the reverse-rotation needle-up function in combination with the auto lifter mechanism
- The direct-drive head (with no belt), which is directly connected to a compact AC servomotor, achieves outstanding responsiveness and improved stop accuracy
- head helps create a comfortable working environment with reduced vibration and noise
- The arm section of the machine head is fitted with a hand pulley. This allows the operator to visually check the needle entry points
- Complete with table stand and motor
- Computerized, Speed Adjustments, and 27 different Tack Selections.
Brochure(.PDF)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Application Standard Eyelet Buttonhole Bartacking MachineMax. sewing speed 3,200 Stitches per Minute
Sewing Area 30mm x 40mm
Needle Bar Stroke 41.2mm
Lift of the Work Clamp Foot 14mm (17mm when the reverse-rotation needle-up function)
Needle (at the time of delivery) DPx5 (#14)
Hook Standard Shuttle Hook
Lubrication Hook: Minute-Quantity Lubrication
Lubricating Oil JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Weight of the machine head 47.3kg
- Electronic bartacking machine with a sewing area of 20mm x 40mm which gives you the space to complete your projects
- This machine is designed for general bartacking on jeans and work wear
- Unit has sequential programming, enlargement and reduction of patterns, therefore you can stitch several different styles with this machine
- Comes with an easy access control panel, which allows you to make changes to what you are doing and allows for easy use in your machine
- Standard increased jump speed and a memory capacity of 10,000 stitches
- Sewing speed: max. 2,700 s.p.m.
- Stitch length: max. 10mm
- Sewing area: 30mm (l) x 40mm (w)
- Work clamp lift: Max. 17mm
- Number of stitches:10,000 /pattern
- Number of patterns: up to 94 patterns with added ROM
The world's highest sewing speed of 3,200rpm !
The proven computer-controlled bartacking machine has been dramatically evolved to be an easier-to-use machine.
Since the machine is provided with an active tension mechanism, it is able to set a needle thread tension that matches various sewing conditions (such as thread, material and sewing speed) on the operation panel, store the data in memory and reproduce it.
The needle thread tension can be separated according to stitching type or portion of a seam, such as the beginning part of the seam, base stitched part, zigzag stitched part and end of the seam (fastening stitch).
When the operation panel (IP-200B) is used in combination with the active tension, the needle thread tension can be set on a stitch-by-stitch basis. This helps eliminate undesired thread tension variations at a multi-layered part of a material or with sewing direction, thereby contributing to upgraded seam quality.
Only Video for for Juki LK1900A model with Computer Control Panel Box on Table.
Thread Recommendations for Buttonhole, Button Sew and Bartack Machines
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki LK-1900BNHS Bartacking Tacker X Box Sewing Machine, Thread Trimmer, Foot Lift +Box X Conversion, Clamping, Programming take 2-3 weeks +Sample
|
Our Price: $7,999.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
straight bar tack up to 7/8”, Any 2-dimensional boxes, rectangles, etc. would require additional clamping and programming that would be at additional cost.
LK-1900B-SS
The machine achieves sewing speed of 3,200sti/min. The machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time.
LK-1900B-SS
The machine achieves sewing speed of 3,200sti/min. The machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time.
- Electronic Bartacking Machine
- 3200 Stitches Per Minute
- Industrial Sewing Machine
- The machine achieves the world's highest sewing speed of 3,000rpm
- In addition to the high-speed sewing performance, the machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time
- The machine comes with a newly developed needle thread grasping mechanism
- The mechanism prevents thread from slipping off from the needle eyelet at the beginning of sewing, from tangling on the wrong side of the material and also being stained during sewing
- The thread trimming mechanism has been further improved to shorten the length of thread remaining on the wrong side of the material after thread trimming
- With its 30mm (length) by 40mm (width) sewing area, the machine can sew many different shapes of bartacks
- The machine is provided as standard with as many as 50 different types of sewing patterns including semilunar bartacking, round bartacking, radial tacking as well as conventional bartacks
- Thanks to our advanced dry-head technology, the frame (needle bar and thread take-up) no longer requires lubrication. This prevents the material from being stained with lubricating oil
- Just a small quantity of just clean oil is supplied from the oil tank to the hook
- The machine is provided as standard with an auto-lifter that uses a new stepping-motor system. This helps reduce operator fatigue
- It is also possible to change over the stroke of the auto-lifter from a one-step stroke to a double-step stroke, which offers easier positioning of a material on the machine
- For the double-step stroke, an intermediate stopping height can be established on the operation panel
- The presser foot lift can be set to a maximum of 17mm by using the reverse-rotation needle-up function in combination with the auto lifter mechanism
- The direct-drive head (with no belt), which is directly connected to a compact AC servomotor, achieves outstanding responsiveness and improved stop accuracy
- head helps create a comfortable working environment with reduced vibration and noise
- The arm section of the machine head is fitted with a hand pulley. This allows the operator to visually check the needle entry points
- Complete with table stand and motor
- Computerized, Speed Adjustments, and 27 different Tack Selections.
Brochure(.PDF)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Application Standard Eyelet Buttonhole Bartacking MachineMax. sewing speed 3,200 Stitches per Minute
Sewing Area 30mm x 40mm
Needle Bar Stroke 41.2mm
Lift of the Work Clamp Foot 14mm (17mm when the reverse-rotation needle-up function)
Needle (at the time of delivery) DPx5 (#14)
Hook Standard Shuttle Hook
Lubrication Hook: Minute-Quantity Lubrication
Lubricating Oil JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Weight of the machine head 47.3kg
- Electronic bartacking machine with a sewing area of 20mm x 40mm which gives you the space to complete your projects
- This machine is designed for general bartacking on jeans and work wear
- Unit has sequential programming, enlargement and reduction of patterns, therefore you can stitch several different styles with this machine
- Comes with an easy access control panel, which allows you to make changes to what you are doing and allows for easy use in your machine
- Standard increased jump speed and a memory capacity of 10,000 stitches
- Sewing speed: max. 2,700 s.p.m.
- Stitch length: max. 10mm
- Sewing area: 30mm (l) x 40mm (w)
- Work clamp lift: Max. 17mm
- Number of stitches:10,000 /pattern
- Number of patterns: up to 94 patterns with added ROM
The world's highest sewing speed of 3,200rpm !
The proven computer-controlled bartacking machine has been dramatically evolved to be an easier-to-use machine.
Since the machine is provided with an active tension mechanism, it is able to set a needle thread tension that matches various sewing conditions (such as thread, material and sewing speed) on the operation panel, store the data in memory and reproduce it.
The needle thread tension can be separated according to stitching type or portion of a seam, such as the beginning part of the seam, base stitched part, zigzag stitched part and end of the seam (fastening stitch).
When the operation panel (IP-200B) is used in combination with the active tension, the needle thread tension can be set on a stitch-by-stitch basis. This helps eliminate undesired thread tension variations at a multi-layered part of a material or with sewing direction, thereby contributing to upgraded seam quality.
Only Video for for Juki LK1900A model with Computer Control Panel Box on Table.
Thread Recommendations for Buttonhole, Button Sew and Bartack Machines
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki PLC-2760 Double Needle Post-bed Walking Foot Unison Needle Feed Machine Lg Hook, Set Up Servo Power Stand, Requires Air Compressor for Foot Lift
 92750: Juki PLC-2760 2 Needle Post-bed Unison-feed Lockstitch Machine, Assembled Stand, Servo Motor |
Our Price: $8,999.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 6-8 weeks. Condition: New In Box |
Features
It is the most-advanced sewing machine which is best-suited to the sewing of heavy weight materials sewing processes such as car-seats, sofas and sports goods. The long distance from the machine arm to the needle contributes to improved workability.
The Juki PLC-2760 is the most-advanced post-bed lockstitch sewing machine and is best-suited to the sewing of heavy-weight materials sewing processes such as car-seats, sofas and sports goods.
This machine with a thread trimmer utilizes a basic performance which matches best to the sewing of heavy materials such as car seats and furniture. The vertical strokes of the presser foot and walking foot (amount of alternating vertical movement of the walking foot and presser foot) can be easily changed using the large dial mounted on the top of the machine head.
Stitch length can be changed over among different lengths:
The sewing machine with a thread trimmer is provided as standard with a 2-pitch dial. One unit of this sewing machine can sew different sewing lengths since the sewing length can be instantaneously changed over.
Reduction of noise and vibration:
Reduce weight by using resin parts for the surface of vibration point. Noise and vibration decrease by changing the gear of a hook into a bevel gear.
High-torque direct-drive motor is installed:
The sewing machine provided with a thread trimmer has adopted a high-torque direct-drive motor which is suitable for heavy-weight materials. Asa a result, the sewing machine is excellent at its responsiveness and ensures increased penetration into the material even when sewing multi-layered parts.
Higher lift of the presser bar:
A presser bar height of 20mm is achieved when using the automatic presser bar lifting lever. Thanks to this feature, the process of joining leather and heavy-weight sponges, which are usually used as materials for expensive sofas, can be carried out with ease.
Eccentricity of the feed driving cam is adjustable:
Adjustment of the eccentricity of the feed driving cam has been enabled. As a result, the sewing machine can perform sewing with feed that is best-suited to the material and thread used. It is no longer necessary to prepare other subclass model sewing machines.
The upper and lower feed ratio is adjustable:
The upper and lower feed ratio can be changed only by the adjustment of the lower feed amount without changing the upper feed amount, thereby preventing material slippage.
Juki PLC-2760 - YouTube
JUKI - PLC-2760 Optional LDA Post Bed Sewing Machine - YouTube
JUKI PLC-2760SCA Optional -7 Electronic Automation/SD for Sewing Car Seats with Smart Device
Click to start slides, shows Optional -7 Electronic Automation
Categories: HEAVY DUTY MACHINES, Upholstery, 2-Needle Lockstitch, Post-Bed, Heavy Duty, Bag Making, Car Trimmers, etc.
The Juki PLC-2760 is the most-advanced post-bed lockstitch sewing machine and is best-suited to the sewing of heavy-weight materials sewing processes such as car-seats, sofas and sports goods.
This machine with a thread trimmer utilizes a basic performance which matches best to the sewing of heavy materials such as car seats and furniture. The vertical strokes of the presser foot and walking foot (amount of alternating vertical movement of the walking foot and presser foot) can be easily changed using the large dial mounted on the top of the machine head.
Stitch length can be changed over among different lengths:
The sewing machine with a thread trimmer is provided as standard with a 2-pitch dial. One unit of this sewing machine can sew different sewing lengths since the sewing length can be instantaneously changed over.
Reduction of noise and vibration:
Reduce weight by using resin parts for the surface of vibration point. Noise and vibration decrease by changing the gear of a hook into a bevel gear.
High-torque direct-drive motor is installed:
The sewing machine provided with a thread trimmer has adopted a high-torque direct-drive motor which is suitable for heavy-weight materials. Asa a result, the sewing machine is excellent at its responsiveness and ensures increased penetration into the material even when sewing multi-layered parts.
Higher lift of the presser bar:
A presser bar height of 20mm is achieved when using the automatic presser bar lifting lever. Thanks to this feature, the process of joining leather and heavy-weight sponges, which are usually used as materials for expensive sofas, can be carried out with ease.
Eccentricity of the feed driving cam is adjustable:
Adjustment of the eccentricity of the feed driving cam has been enabled. As a result, the sewing machine can perform sewing with feed that is best-suited to the material and thread used. It is no longer necessary to prepare other subclass model sewing machines.
The upper and lower feed ratio is adjustable:
The upper and lower feed ratio can be changed only by the adjustment of the lower feed amount without changing the upper feed amount, thereby preventing material slippage.
Juki PLC-2760 - YouTube
JUKI - PLC-2760 Optional LDA Post Bed Sewing Machine - YouTube
JUKI PLC-2760SCA Optional -7 Electronic Automation/SD for Sewing Car Seats with Smart Device
Click to start slides, shows Optional -7 Electronic Automation
Categories: HEAVY DUTY MACHINES, Upholstery, 2-Needle Lockstitch, Post-Bed, Heavy Duty, Bag Making, Car Trimmers, etc.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
PLC-2700 Series Post-bed, Unison-feed, Lockstitch Machines with Vertical-axis Large HookModel name PLC-2710-7, 2710
PLC-2760-7, 2760 PLC-2760L PLC-2765
Max. sewing speed 2,500sti/min 2,000sti/min 2,500sti/min
Max. stitch length 12mm
Presser foot By hand:10mm, Auto:20mm By hand:10mm, Auto:18mm
Needle 135×17 (Nm140)
Nm100～Nm180 135×17 (Nm200)
Nm140～Nm200 135×17 (Nm140)
Nm100～Nm180
Thread #30～#5,
B46～B138,
Nm60/3～18/3 #8～#0 #30～#5,
B46～B138,
Nm60/3～18/3
Model Options:
Post-bed, 1-needle, Unison-feed, Lockstitch Machine
PLC-2710-7
PLC-2710
Post-bed, 2-needle, Unison-feed, Lockstitch Machine
PLC-2760-7
PLC-2760
PLC-2760L(thick-thread long-pitch type)
PLC-2765(with organized split needlebars)
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 146RBL-3A-1 30" Longarm 3/8" 9.5mmW 3Point Zigzag Walking Foot Sewing Machine, 10mm Foot Lift, Unassembled Stand, Servo Motor
 39872: Consew 146RBL-3A-1 30" Longarm 3/8" 9.5mm 3 Point Zigzag Walking Foot Sewing Machine, Single |
Our Price: $8,499.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Applications
- Four step/three stitch zig-zag
- For sewing elastic and other stretch materials
- For stitching such products as boat and truck covers, tents, awnings, sails, parachutes, tarpaulins and similar products
- Used on such materials as canvas, nylon, vinyl, leather, synthetics and similar materials.
- 30" long arm for 30 inches of workspace.
Features
- Large bobbin and horizontal axis transverse rotary hook
- Wide zig-zag
- Upper feed mechanism helps avoid slippage when sewing
- Reverse stitching
- Stitches per minute - 2500*
- Optional: Interchangeable between 1A, 2A & 3A stitches; Additional parts required (not included).
Consew 146RB Series Spec Sheet (.PDF)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Number of Needles: 1 (Single)Feeding Mechanism: Walking Foot
Workspace: Long Arm
Standard or Full Function: Standard Functions
Speed, Max (S.P.M.): 2500
Clearence Under Presser Foot: 25/64" (10mm)
Stitch Length: 5 s.p.i. (5mm)
Work Space: 30" (765mm)
Needle: 135 x 17
Bobbin: Metal 212O34-312, or Pre-wound M
Bed Size: 7" x 33 1/4" (178mm x 848mm)
Needle Bar Stroke: 1-11/32" (34mm)
Hook: B79
Zig-Zag Stitch Width: 3/8" (9.5mm)
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.