October 24, 2017

Gravity Feed Steam Irons

S_6069_365
Gravity Feed Irons only have steam holes at the front by design. Steaming should be done slightly above the fabric, just before pressing strokes with a then dry soleplate which also helps to remove moisture. Steam is only required to relax the fibers before pressing dry. If you steam at the same time while using pressing strokes, it will add too much moisture to the fabric and cool the iron soleplate down. Gravity feed irons do not have continuous steam boilers, so steaming should be done intermitantly between pressing strokes, not constantly. That way that the iron soleplate and steam chamber does not have a chance to cool down and spit out condensation.

(Q)I have a small art business. I need to iron a lot of wool sweaters. I don't need an iron for delicate fabrics. What is the difference between the gravity fed iron and the steam generating iron?
(A)Both have continuous steam, but the soleplate temperture is adjustable on steam generator irons, even though the steam source stays the same temperature. Gravity feed irons can cool down quicker. with steam generator irons you have steam going into the iron, whereas with gravity feed you have cold water going into the steam chamber of the iron.

(Q)What is dry steam?
(A)The higher the temperature and pressure of the steam generating boiler, the less humidity is in the steam.

How to Use Gravity Feed Irons:
1. Hang bottle apx. 40 inches above pressing surface.
2. Connect the silicone hose to the iron and bottle.
3. Empty demineralizer package into the bottle and fill it with tap water only.
4. Tie the electrical cord and hose together.
5. Plug the iron cord into a grounded electrical outlet.
6. Set the temperature dial on NO. 4 and let the iron heat up for ten minutes.
7. Open the bottle valve and allow the hose to fill with water by pressing the steam switch. The iron is now ready for use.
8. When not pressing, place the iron on the supplied iron rest. Do not stand on its back!

These irons are for industrial use. Some major parts are UL/CE approved ( ex: 151504 thermostat),but as a whole it's not.
Even if it were UL/CES approved as a whole, it is not wise to use industrial irons in homes. The functioning of home irons and industrial irons are different. For instance, home irons have a function automatically to cut the electricity if the iron falls over. It may even make a sound or beep while industrial irons do not have such function.
Industrial irons are meant for use by professionals who know how to properly handle their equipment. The manufacturers of home use products have a much higher responsibility when putting their products in people's homes, and must provide special fail safes to protect the home user.
If a home user wishes to purchase and use industrial irons in their home they must be aware of the safety differences between home irons and industrial irons.
Home users of industrial irons must be mindful of the extra caution that must be used when using irons intended for industrial use in the home.


Ricoma GSI-8800 Steam Iron Gravity Feed, Water Bottle and Hose, 1000 Watts, Weighs 4.6 Lbs, Includes Iron Rest and Demineralizer, 3 Prong Safety Plug

GSI-8800, Best Buy, Gravity Feed, Water Bottle, Steam Iron, 1000W, 4.6Lbs, 120x209mm Aluminum Soleplate, Recessed Steam Switch, Heat Shield, Ricoma Feiyue, GSI8800, Gravity, Feed, Water, Bottle, Steam, Iron, 1000W, 4.6 Lbs, 120 x 209 mm Aluminum, Soleplate, Recessed, Steam, Switch, Heat, Shield, Ricoma , Feiyue, Ricoma GSI-8800 Gravity Feed Water Bottle Steam Iron GSI8800, 1000W, 4.6Lbs, 120x209mm Aluminum Soleplate, Recessed Steam Switch, Heat Shield, Feiyue


Our Price: $99.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models. Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.

  • U/L approved thermostat with the improvement on the steaming quality
  • Protective shield made from polyphenylene surface
  • Comfortable handle
  • Includes Iron Rest and Demineralizer

    PLEASE NOTE: THE IRON MAY ARRIVE WITH EITHER RICOMA OR IKONIX AS THE BRAND NAME. THESE ARE THE SAME EXACT IRON,JUST DIFFERENT BRAND NAMES THE SAME COMPANY USES.
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Gemsy CS-94-A Commercial Gravity Feed Water Bottle Steam Iron 5 Pounds, 3 Prong Safety Plug on Power Cord

Gemsy CS-94-A, cs94a, cs94-a, cs-94a, Commercial, Gravity Feed, Steam Iron, 1000W,110V, 135oz Tank, Water Bottle, 80 inch Hose, Urethane Handle, Aluminum Soleplate, Iron Rest,Teflon Shoe, 5Lbs


Our Price: $99.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Larger Heat Shield to keep steam from coming into contact with your hands.Recessed Thumb Switch for Steam Activation to keep switch from getting broken off if iron tips over

Note: Must add demineralizer under Recommended Accessories below, since it does not come with the gravity feed iron.

Professional Quality - Tailors and Dry Cleaners know the Secret to fast Pressing - Steam, and lots of it!!! Gravity Irons are used in Garment Factories, laundry, and Dry Cleaners, Boutiques, Hospitals, Hotels - basically and place that needs to do a High amount of Pressing and to get it done Quickly. Now you can Achieve the same results and save.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Goldstar GS-94A Commercial Gravity Feed Steam Iron 1000W 110V, Hot Iron Rest, 3 Prong Safety Plug on Power Cord

Gold, star, GS-94A, Industrial, Gravity, Iron, 110V, 60Hz, 135.2, FL, Oz, Water, Capacity, 1000, Watts, 80, Bottle, Hose, Aluminum, Sole, plate, Light, weight, Commercial, Feed, Steam, Urethane, Handle, 4.6Lbs


Our Price: $99.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

*Note: Must add demineralizer under Recommended Accessories below, since it does not come with the gravity feed iron.

Heat Shield for Hands to keep steam from coming into contact with your skin, Recessed Thumb Switch for Steam to keep from getting broken off when iron tips over.

Professional Quality - Tailors and Dry Cleaners know the Secret to fast Pressing - Steam, and lots of it!!! Gravity Irons are used in Garment Factories, laundry, and Dry Cleaners, Boutiques, Hospitals, Hotels - basically and place that needs to do a High amount of Pressing and to get it done Quickly. Now you can Achieve the same results and save.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Goldstar GS-85 Commercial Gravity Feed Steam Iron 1000W 110V, Hot Iron Rest, 3 Prong Safety Plug on Power Cord

Goldstar, GS-85, Commercial, Gravity, Feed, Steam, Iron, 1000W, 110V, Hot, Iron, Rest


Our Price: $99.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Using the simplicity of gravity, the ironing system line by Goldstar provides the presser with high-quality, deep-penetrating steam that’s perfect for a complete range of garments. It was designed for use by garment manufacturers, dry cleaners, alteration specialists, tailors, retail stores, and sample rooms.




Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Model: GS-85AF
  • Electrical: 110 volts/ 60 Hertz
  • Water capacity: 4000 ml/ 135.2 fluid-ounces
  • Wattage: 1000 Watts
  • Weight: 4.6 pounds
  • Water bottle hose: 80 inches long
  • Dimensions: 9 inches long x 4.75 inches wide x 6 inches deep
  • UL-approved thermostat
  • Urethane handle
  • Aluminum sole plate
  • Rotary adjustment dial
  • Included water bottle
  • Teflon shoe and de-mineralizer not included and are optional

Goldstar Teflon Shoe Non Stick PTFE for GS-300 Gravity Feed Iron

Goldstar, Teflon Shoe, Non Stick, PTFE, for GS-300, Gravity Feed Iron


Our Price: $29.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Goldstar Teflon Shoe Non Stick PTFE for GS-300 Gravity Feed Iron
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Goldstar GS-300 Commercial Gravity Feed Steam Iron 1000W 110V, Hot Iron Rest, 3 Prong Safety Plug on Power Cord

Goldstar GS300, Commercial, Gravity Feed, Steam Iron, 1000W,110V, 135oz Tank, Water Bottle, 80 inch Hose, Urethane Handle, Aluminum Soleplate, Iron Rest,Teflon Shoe, 5Lbs


Our Price: $119.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Using the simplicity of gravity, the ironing system line by Goldstar provides the presser with high-quality, deep-penetrating steam that’s perfect for a complete range of garments. It was designed for use by garment manufacturers, dry cleaners, alteration specialists, tailors, retail stores, and sample rooms.

Professional Quality - Tailors and Dry Cleaners know the Secret to fast Pressing - Steam, and lots of it!!! Gravity Irons are used in Garment Factories, laundry, and Dry Cleaners, Boutiques, Hospitals, Hotels - basically and place that needs to do a High amount of Pressing and to get it done Quickly. Now you can Achieve the same results and save.

*Note: Must add demineralizer under Recommended Accessories below, since it does not come with the gravity feed iron.


Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Sapporo Non Stick PTFE Teflon Iron Shoe for SP-527 Gravity Feed Iron

Sapporo Non Stick PTFE Teflon Iron Shoe for SP-527 Gravity Feed Iron


Our Price: $19.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Teflon Iron Shoe for the SP-527 Gravity Feed Steam Iron
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Sapporo SP-527 Gravity Feed Steam Iron. Dimeneralizer and Teflon Iron Shoe are Optional*, 3 Prong Safety Plug on Power Cord

Sapporo, SP-527, Gravity Feed, Water Bottle, Steam Iron, SP527,  120V, 1000W, 2 Kg, Hard Anodized, Aluminum Soleplate, 7' foot Power Cord


Our Price: $99.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Recessed Soft Touch Thumb Switch for Steam that cannot get knocked loose like earlier models. Heat Shield for your hands keeps them cooler than earlier models without barrier
  • Elegantly designed with a soft-touch thumb switch for easy and powerful steam release.

  • Best quality
  • High productivity
  • For professional use
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Model: SP-527
Volts: 110V-120V
Watts: 1000W
Weight: 2.1 Kgs
Size: 115mm x 205mm
Sole Plate: Hard anodized aluminum

How to Use a Gravity Feed Iron

What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor

steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com

steam generator or gravity-feed iron on PatternReview.com

Gravity Feed Irons by NancyKsews.com

Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Sapporo SP-527-120-C Gravity Feed Steam Iron, Water Bottle, Filters, Demineralizer, Hot Iron Rest, Teflon Shoe, 3 Prong Safety Plug on Power Cord

Sapporo, SP-527, Gravity Feed, Water Bottle, Steam Iron, SP527,  120V, 1000W, 2 Kg, Hard Anodized, Aluminum Soleplate, 7' foot Power Cord


Our Price: $119.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Recessed Soft Touch Thumb Switch for Steam that cannot get knocked loose like earlier models. Heat Shield for your hands keeps them cooler than earlier models without barrier

  • Elegantly designed with a soft-touch thumb switch for easy and powerful steam release.

  • Best quality
  • High productivity
  • For professional use
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Model: SP-527-120-C
Volts: 110V-120V
Watts: 1000W
Weight: 2.1 Kgs
Size: 115mm x 205mm
Sole Plate: Hard anodized aluminum

Typical Instruction Book for Gravity Feed Irons from Asia

How to Use a Gravity Feed Iron

User Review, Initial Impressions, Gravity Feed Iron by A Little Sewing.com

What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor

steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com

steam generator or gravity-feed iron on PatternReview.com

Gravity Feed Irons by NancyKsews.com

Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Ace Hi ES85A Silver Star Gravity Feed Steam Iron, Hot Iron Rest, Demineralizer, 1000W, 5Lbs, Aluminum Soleplate, Soft Cool Handle, Water Bottle, Hose

Silver Star, ES-85A, Gravity Feed, Steam Iron, 1000 Watts, 5 Pounds,  Urathane Handle, Specify 120V or 220V By Ace Hi


Our Price: $99.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

*Free $20 Ace Hi AHR-14oz Bag of Demineralizer Filter Resin for Silver Star ES85C, ES90C, ES300, AceHi AH100G, ES85, ES90, ES300, All Brands of Gravity Feed Steam Irons. Demineralizer removes minerals that can clog up the hose, solenoid valve, steam chamber and steam holes on the bottom of the iron.

  • U/L Approved Thermostat
  • Special Urathane Handle Keeps the Hands Super Cool
  • The Stainless Steel & Hard Anodized Aluminum Base
  • Superior Durability on Pressing Surface
  • External Thumb Switch for steam, not recessed like newer models.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

About Gravity Feed Electric Steam Iron



Electricity: 120V
Wattage: 1000W
Weight: 5 lbs (2.3 kgs)

Consew Silver Star Ace Hi ES-85A Manual

Ace Hi AH-100G Industrial Best Buy Gravity Feed Steam Iron (same as Silver Star CES300) 3 Prong Safety Plug End on Power Cord

Ace-Hi, AH-100G, AH100G, Self, Contained, Gravity, Feed, Steam, Iron, Heat, Shield, Soft, Handle, Recess, Switch, Aluminum, Sole, Plate, Water, Bottle, Silicone, Iron, Rest


Our Price: $129.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Replaces SilverStar ES300 in AceHi Line Up (Same as Consew CES300 Still Available)
*FREE Ace-Hi Non Stick Teflon Ironing Shoe 100-Shoe, and AHR-14OZ Demineralizer Filter Resin

Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models. Heat Shield for your hands keeps them cooler than with earlier models without any barrier.

  • Convenient soft touch steam switch recessed into handle and rotary temperature dial in back of iron
  • Hand Heat shield for added protection
  • Soft, Comfortable urethane handle
  • Hard anodized aluminum sole plate
  • High quality steam distribution
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

About Gravity Feed Electric Steam Iron



How to Use a Gravity Feed Iron

steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com

Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Consew CES-90A (ES-90 EZ-90) Gravity Feed Steam Iron 1000W, 4.5Lb by Silver Star, Iron Rest, Non Stick Shoe, Water Bottle, Demineralizer, UL Approved

Consew CES-90A (ES-90, EZ-90) Consew, CES-90A, CES90, Gravity Feed, Steam Iron, by Silver Star, 1000W, Water Bottle, UL Approved


Our Price: $114.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models.
Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.

  • U/L Approved Thermostat
  • Comfortable Handle-grip
  • Hard Anodized Aluminum Base
  • Stainless Steel on Hard Anodized Aluminum Base for Superior Pressing Surface Durability
  • Comes with the water bottle and hose
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Electricity: 120V
Wattage: 1000W
Weight: 4.6 lbs (2.1 kgs)

How to Use a Gravity Feed Iron

What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor

steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com

steam generator or gravity-feed iron on PatternReview.com

Gravity Feed Irons by NancyKsews.com

Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Consew CES300 Silver Star Gravity Feed Steam Iron, Hot Iron Rest, Demineralizer, 1000W, 4.6Lb, Thumb Switch, Heat Shield, Water Bottle, Safety Plug In

Consew, CES-300, Gravity, Feed, Steam, Iron, Ace, Hi, ES300, Silver, Star, Korea, CES300, 4.6, Pounds, 1000, W, Iron, Rest, Water, Bottle, Non, Stick, Shoe, Demineralizer, ES300, CES300, 1000W, 4.6Lb, Recess, Thumb, Switch, Lg, Heat, Shield, Water, Bottle, Rest


Our Price: $119.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Note: Compare same Ace Hi ES300 for $99 Ace Hi Silver Star ES300 (Consew CES300) Gravity Feed Steam Iron 1000W, 4.6Lb, Recess Thumb Switch, Heat Shield, Water Bottle

Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models.

Heat Shield for your hands keeps them cooler than with earlier models without any barrier.

  • 1000 Watts, 4.6 Lbs
  • Recessed Thumb Switch For Steam
  • Large Heat Shield For Hand
  • Water Bottle Included
  • Non-Stick Iron Shoe Soleplate Cover Included
  • Iron Rest Included
  • Bag of Demineralizer added to shipment
  • Gravity-Feed Iron
  • Made In Korea By Silver Star
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Consew ES-85A Gravity Feed Steam Iron Silver Star, 1000W, 5Lb, Soft Handle, External Steam Switch, Teflon Shoe, Iron Rest, Demineralizer, Water Bottle

Consew, CES-85AF, ES85A, ES-85A, Gravity Feed Steam Iron, 1000 Watts, 5 Pounds,  Urathane Handle, Specify 120V or 220V


Our Price: $114.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Compare same ES85A by Silver Star with External Steam Switch when available from Ace Hi ES-85A Gravity Feed Steam Iron, 120V or 220V, 1000W, 5 Lbs, Demineralizer

  • U/L Approved Thermostat
  • Special Handle Keeps the Hands Super Cool
  • Stainless Steel on Hard Anodized Aluminum Base for Superior Pressing Surface Durability
  • Superior Durability on Pressing Surface
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Electricity: 120V/220V
Wattage: 1000W
Weight: 5 lbs (2.3 kgs)

How to Use a Gravity Feed Iron

What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor

steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com

steam generator or gravity-feed iron on PatternReview.com

Gravity Feed Irons by NancyKsews.com

Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Silver Star ES300 Gravity Feed Steam Iron 1000W, Hot Iron Rest, 4.6#, Water Bottle, Demineralizer, Teflon Shoe, Safety Plug(AceHi ES300 Consew CES300)

Silver Star ES-300, AceHi ES300, Consew CES300, Gravity Feed Steam Iron, Iron Rest, Water Bottle & Non-Stick Iron Shoe.


Our Price: $119.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models. Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.

  • 1000 Watts, 4.6 Lbs
  • Recessed Thumb Switch For Steam
  • Large Heat Shield For Hand
  • Complete with Teflon shoe and demineralizer resin
  • Gravity-Feed Iron
  • Made In Korea By Silver Star
  • Stainless Steel on Hard Anodized Aluminum Base for Superior Pressing Surface Durability
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Voltage 110 Standard US Voltage
  • U/L approved thermostat
  • High quality steam distribution
  • Hard anodized aluminum sole plate
  • Comfortable urethane handle
  • Convenient soft-touch button switch & rotary heat dial
  • Heat shield for added protection during long use
  • Modern body style - All black
  • 1000 Watts
  • 4.6 lbs
  • 8-1/4" (L) x 4-3/4" (W)

Silver Star ES-85 Gravity Feed Steam Iron Complete* Choose 110 or 220V, 3 Prong Safety Plug End on Power Cord

Silver Star, ES-85C, 110V, Gravity Feed, Steam Iron, 1000W, 4.6 Lbs, Rubber Handle, Stainless Steel, Annodized Soleplate, teflon Iron Shoe, Water Bottle, Demineralizer


Our Price: $149.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

  • For Commercial, not Residential Use
  • U/L Approved Thermostat*
  • Special Rubber Handle Keep Hands Super Cool
  • Easily Replaceable Thermostat
  • Hard Anodized Aluminum Base for Superior Pressing Surface Durability
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Silver Star ES-85A Gravity Feed Steam Iron 120V, Demineralizer, Non Stick Iron Shoe, Hot Iron Rest, 3 Prong Safety Plug on Power Cord

Silver Star, ES-85A, Gravity Feed, Steam Iron, (Ace Hi EC85, Consew CES-85) 1000W, 5Lbs, Silicone, Iron Rest, Water Bottle, & Hose, Add Demineralizer, & Shoe


Our Price: $99.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

  • U/L Approved Thermostat*
  • Special Rubber Handle Keep Hands Super Cool
  • Easily Replaceable Thermostat
  • Stainless Steel on Hard Anodized Aluminum Base for Superior Pressing Surface Durability

    If non standard 220V is needed please call us for availability.
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Silverstar EZ-90 Gravity Feed Steam Iron, Hand Heat Shield, Water Bottle, Demineralizer, Hot Iron Rest, Teflon Iron Shoe, 3 Prong Plug on Power Cord

Silver Star EZ-90C (AceHi ES90, Consew CES90) Gravity Feed Steam Iron Professional, 120V, 1000W, Water Bottle, Demineralizer, Rest, Teflon Iron Shoe Bonus Non-Stick Iron Shoe, UL Approved


Our Price: $149.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Professional, 120V, 1000W, Water Bottle, Demineralizer, Iron Rest, Teflon Shoe, Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models. Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.

  • UL approved thermostat
  • High working efficiency
  • 900-1000 watts
  • Ergonomically designed rubber handle for slip-proof grip will keep hands cool and comfortable
  • Easy to iron sleeves and tubular items
  • Activate steam flow instantly with the touch of a button
  • Stainless Steel on Hard Anodized Aluminum Base for Superior Pressing Surface Durability
  • Thermo-shield keeps heat away from hands for safety and comfort
  • Hard anodized base for superior pressing surface durability
  • Demineralizer included to help filter water and prevent mineral clogging in water tank and hose
  • Magic Non-stick Shoe allows you to kiss your press cloths, wrong side pressing, low temp settings, and all the slow, tedious, time-consuming ways that prevent unwanted shine goodbye
  • Non-stick shoe is made by laminating a thick sheet of the smoothest, slipperiest material known to a layer of aluminum alloy
  • Magic Non-stick Iron Shoe provides a pressing surface so slick that your iron will never again scorch or stick to even the most delicate or difficult-to-press fabrics
  • Can use shoe with velvet, velour, polyester, cotton, linen, rayon, & silk
  • Can also be used with fusible interfacings and tapes
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Silverstar ES-90 (EZ-90) Gravity Feed Steam Iron, Water Bottle, Demineralizer, Iron Rest, PTFE Non Stick Iron Shoe, 3 Prong Safety Plug on Power Cord

Silverstar ES-90 (EZ-90), Silver Star ES-90C (AceHi ES90, Consew CES90) Gravity Feed Steam Iron Professional, 120V, 1000W, Water Bottle, Demineralizer, Rest, Teflon Iron Shoe Bonus Non-Stick Iron Shoe, UL Approved


Our Price: $119.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Professional, 120V, 1000W, Water Bottle, Demineralizer, Iron Rest, Teflon Shoe, Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models. Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.

  • UL approved thermostat
  • High working efficiency
  • 900-1000 watts
  • Ergonomically designed rubber handle for slip-proof grip will keep hands cool and comfortable
  • Easy to iron sleeves and tubular items
  • Activate steam flow instantly with the touch of a button
  • Stainless Steel on Hard Anodized Aluminum Base for Superior Pressing Surface Durability
  • Thermo-shield keeps heat away from hands for safety and comfort
  • Hard anodized base for superior pressing surface durability
  • Demineralizer included to help filter water and prevent mineral clogging in water tank and hose
  • Magic Non-stick Shoe allows you to kiss your press cloths, wrong side pressing, low temp settings, and all the slow, tedious, time-consuming ways that prevent unwanted shine goodbye
  • Non-stick shoe is made by laminating a thick sheet of the smoothest, slipperiest material known to a layer of aluminum alloy
  • Magic Non-stick Iron Shoe provides a pressing surface so slick that your iron will never again scorch or stick to even the most delicate or difficult-to-press fabrics
  • Can use shoe with velvet, velour, polyester, cotton, linen, rayon, & silk
  • Can also be used with fusible interfacings and tapes
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Segye Hot Steam SGB-700 Gravity Feed Steam Iron (Replaces SGB-600, Like Hi Steam, HYS58 Naomoto) Demineralizer, Hot Iron Rest, Iron Shoe, Water Bottle

Hot Steam, SGB700, Gravity Feed, Steam Iron, (Segye, SGB-600, Like HYS58, Naomoto), HiSteam HYS58 , Segye SGB-700Commercial Gravity Feed Steam Iron SGB700, 1000 Watts, Iron Rest, Water Bottle, Demineralizer, 2 Kilos Weight  - Like Hi Steam HYS-58


Our Price: $169.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.Ground shipping guaranteed 3 days or less for contiguous US!
Condition: New In Box

Features

Touch Switch for Easy Operation - 2.0 kg Machine Makes This a Light and Easy To Use Iron - Easy Grip Handle - 1,000 Watt Power For Effective Ironing - Gravity Fed Steam

  • Touch Switch for Easy Operation
  • 2.0 kg Machine Makes This a Light and Easy To Use Iron
  • Easy Grip Handle
  • 1,000 Watt Power For Effective Ironing
  • Gravity Fed Steam
Extended US Warranty: 6 Months Parts and 90 Days Labor Service on defects in material and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

How to Use a Gravity Feed Iron

What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor

steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com

steam generator or gravity-feed iron on PatternReview.com

Gravity Feed Irons by NancyKsews.com

Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Hi Steam EFE 55W Pro Gravity Feed Steam Iron 5Lbs, Hot Iron Rest, Demineralizer, 3 Prong Safety Plug End on Power Cord

Hi, Steam, EFE, 55W, Gravity, Feed, Steam, Iron, Rest, Water, Bottle, Demineralizer


Our Price: $199.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models. Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.

  • 1000 Watts
  • Weighs Only 5 Lbs
  • Prevents Clogging
  • Water Bottle Included
  • Gravity Feed Iron
  • Deminerializer And Iron Rest

    Warranty: 90 Days on Parts
Non-US Warranty: 30 days parts and labor.

Specifications

Pacific Steam PSI-5E Gravity Feed Iron, Hose, Iron Rest, Demineralizer, Replaces Segye SGB-700 No Longer Available

Pacific, Steam, PSI-5E, Gravity, Feed, Steam, Iron, Iron, Rest, Water, Bottle, Clear, Hose, Demineralizer, Resin, Recessed, Switch, Heat, Shield


Our Price: $169.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Please order Pacific SH-5S Teflon Shoe at time of purchase of Pacific PSI-5S Gravity Feed Water Bottle Steam Iron. Does not meet Pacific Steam minimum order requirements to ship by itself on a separate order.

Recessed Thumb Switch for Steam Release that cannot get knocked loose like earlier models. Heat Shield under handle keeps hands cooler than earlier models without any barrier. Pacific steam PSI-5E steam electric Iron comes complete with a water bottle, Silicone Hose, spring, and iron rest. Iron Shoe not included.

  • Iron weighs 4.5 pounds
  • Economical, Superior Quality
  • Ergonomically Designed
  • 120V
  • Recessed Thumb Switch for Steam
  • Heat Shield for Your Hand, Under Handle
  • Includes Water Bottle, Hose, Iron Rest And Demineralizer
Extended US Warranty: 6 Months Parts and 90 Days Labor Service on defects in material and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

How to Use a Gravity Feed Iron

What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor

steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com

steam generator or gravity-feed iron on PatternReview.com

Gravity Feed Irons by NancyKsews.com

Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Hashima HI-350PS Professional Gravity Feed Steam Iron 1200W, Japan, 5Lb, Electronic Thermostat, CleanOut Ports, Water Bottle, Demineralizer, Iron Rest

Hashima, HI-350PS, Professional, Gravity Feed, Steam Iron, - Made in Japan, 5 pounds, Hashima HI-350PS Professional Gravity Feed Steam Iron HI350PS JAPAN, 1200W, Electronic Thermostat, Cleanout Ports, 3L Water Bottle, Demineralizer, 4Lbs


Our Price: $499.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models. Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.

Note: 220V is special order from Japan and takes 60-90 days to arrive in USA before shipping.

A new and exciting steam iron which meets the demands of the twenty first century. Very fashionable steam iron which is proud of its novel mechanism designed, and assures high working efficiency.

This iron has been developed with easy of use in mind.
The temperature can be easily controlled using the thermistor and electric thermostat.

The iron is made from light materials so the user does not become tired.

Strong steam output is another of this machine’s special features.

As the steam chamber is completely sealed, and the main switch and thermostat are not on the actual iron, durability is insured.

The bottom of the water bottle has a round mesh filter (in red color)to keep the demineralizer granules from passing through the water valve, hose, solenoid and iron steam chamber.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Electric Capacity: AC 120V - 1,200 W
Dimensions: Depth: 240mm, Width 105mm, Height 135mm
Net Weight: 4 lbs.
Water Tank: 3.0

How to Use a Gravity Feed Iron

What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor

steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com

steam generator or gravity-feed iron on PatternReview.com

Gravity Feed Irons by NancyKsews.com

Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Naomoto HYS-58 Gravity Feed Steam Iron Japan, Water Bottle, Deminerializer, Iron Rest, Heat Shield, 5Lbs, 880W, 80PSI 5Bar, Replace Segye SGB700 N.L.A

Naomoto, HYS 58, Gravity, Feed, Steam, Iron, 5, pounds, 880, Watts, 80, PSI, 5.5, Bar, Pressure, Water, Bottle, Deminerializer, Filter, Resin, Silicone, Rest, HYS58, 110V, 220V


Our Price: $499.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Note: Optional Iron Shoe is only available at time of order due to minimum order value requirements from vendor. Naomoto Iron Shoe #2 for HYS 58 Gravity Feed Steam Iron Prevents Scorching Shinning Garments & Fabrics

The HYS-58 quickly generates its own steam using only tap water. A special filter resin prevents clogging. New Conex heat canopy deflects heat rise, keeping handle cool. Temperature control is accurate to 2 degrees. Safe for any fabric. Comes complete with water tank, filter resin, water hose and iron rest.

  • Electric Micro-Switch Operation
  • Water Bottle Feed
  • Weight 4.18 lbs. 900W
  • Complete with water bottle, filter resin - 1lb. Bag, cleaning kit, and iron rest
  • New steam chamber for easy cleaning
  • Liquid type sensor thermostat
  • Urethane grip handle
  • Heat Shield
  • Light touch microswitch
  • Tuffram sole coating
  • One piece chamber & solepate
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Specially designed for use in garment factory, laundry and dry cleaners, apparel and alteration stores, boutiques, department stores, hotels, hospitals, etc.
  • Easy, precise steam volume control with micro-switch operation
  • Ergonomic design with contoured handle to fit your hand
  • Wood handle is designed to fit the human hand and has natural insulation properties for operator comfort
  • Gently beveled soleplate makes smooth, easy ironing with no marking or tracking
  • Temperature control using a liquid sensor thermostat for percision and accuracy
  • Flush temperature dial is flush with the surface of the rear plate for finger light temperature adjustments
  • Heat shield improved non-woven Nomex material protects the hand from heat up to 280 degrees Celsius
  • Excellent visibility with complete open end handle design allows the user to see the point of the iron at all times
  • Iron safely without watering at lower temperatures and pressures (20 - 80 psi, 1.5 - 5.5 bar) allows you to iron under the best conditions to prevent fabric damage
  • Extremely energy efficient
  • New hard nickel coating means smoother ironing with less resistance, ironing surface cleans easily with just a cloth, and there's no Teflon non stick shoe required!
  • Soleplate: Hard nickel
  • Electrical: 110/220 V, 880 Watts
  • Weight: 3.74 lbs to 5.5 lbs
  • HYS58 Iron head is 4.8 pounds

    How to Use a Gravity Feed Iron

    What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor

    steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com

    steam generator or gravity-feed iron on PatternReview.com

    Gravity Feed Irons by NancyKsews.com

    Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Naomoto Japan HYS410P Electric Steam Iron Only, Power Cord, Pump Hose*

Naomoto, Japan, HYS-410P, Steam Iron, Head Only, for Water Pump, 800W, 203mm×95mm Dims, 1.8Kg, Tuffram, Teflon, Soleplate, Comfort Urethane, Open Handle, HeatShield


Our Price: $499.00
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Without any steam generator, you can easily start ironing wherever you want if only an electric power supply is available.
It is suitable for small factories, boutiques and also garment factory.
You can use the irons for professional use at home.
It is possible to iron with steam only by setting up the water tank or electric mobile water pomp.

Precise temperature control
A combination both Electronic Thermostat(N-89S/ST/W) and Heater Element gives precise temperature control and energy efficiency.

Tuffram finish iron sole
A Teflon injected Iron sole makes smooth and easy ironing with long life.

Naomoto Standard Comfort
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control

*Note: Does not include Naomoto PS-2 pump
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Voltage: 120V
  • Wattage: 800W
  • Dimensions: 203mm×95mm (7.99" x 3.74")
  • Weight: 1.8kg (3.96 lbs)
  • Sole Finishing: Tuffram

Naomoto Japan HYS-520 Electronic Gravity Feed Iron HYS520, 880W, 5Lb, HeatShield, Recess ThumbSwitch, 3 Prong Safety Plug End on Power Cord

Naomoto, HYS, 520, Electronic, Gravity, Feed, Steam, Iron, HYS520, 880W, 5, pounds, Heat, Shield, Recessed, Thumb, Switch, Rest, Water, Bottle, Demineralizer, Filter, Resin, Naomoto, Japan, HYS-520, 880W, 5Lb, Water, Bottle, Filter, Resin, Clean, Kit


Our Price: $699.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Note: Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models.
Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.

  • 880 Watts
  • Electronic Thermostat Temperature Control
  • Electric Micro-Switch Operation
  • Water Bottle Feed Iron
  • Temperature control
  • Weighs only 5 pounds 880W
  • Complete with water bottle, filter resin - 1lb. Bag, cleaning kit, and iron rest
  • Urethane grip handle
  • Heat Shield
  • Light touch microswitch
  • Hard nickel & PTFE fiberglass sole coating

Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

How to Use a Gravity Feed Iron

What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor

steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com

steam generator or gravity-feed iron on PatternReview.com

Gravity Feed Irons by NancyKsews.com

Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Hi Steam Commercial PND-3000A Heated Vacuum Ironing Board Table System

Hi, Steam, Commercial, PND-3000A, Heated, Vacuum, Ironing, Board, Table, Complete


Our Price: $2,199.00
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

  • Professional strength self-contained vacuum for fast drying
  • Vacuum swing arm and inter-changeable buck shapes
  • Heated pressing surface and swing buck
  • Optional conveyer and iron lifter assembly
  • Economically priced
  • Perfect for use with Hi-Steam mini boilers for a complete instant pressing department
  • Ideal for: tailors, alteration rooms, drop-off stores, clothing stores, valet service, tuxedo and bridal shops

    This Board is for Heavy Duty Commercial use.
Non-US Warranty: 30 days parts and labor.

Specifications

Model: PND-3000A
Voltage: 120V 6.5 AMPS
Vacuum Area: 47” x 15.75” x 9.9"
Dimensions: 60.3” x 17.25” 63.0” x 17.25”
Net Weight: 145 lbs

FEATURES:
  • Professional strength self-contained vacuum for fast drying
  • PND-3000AB also features blowing up-air
  • Vacuum swing arm and inter-changeable buck shapes
  • Heated pressing surface and swing buck
  • Optional conveyer and iron lifter assembly
  • Economically priced
  • Perfect for use with Hi-Steam mini boilers for a complete instant pressing department
  • Ideal for: tailors, alteration rooms, drop-off stores, clothing stores, valet service, tuxedo and bridal shops

    Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.

Hi Steam Commercial PND-3000AB Heated Vacuum Ironing and Blowing Board, Sleeve Bucks

Hi Steam Commercial PND-3000AB Heated Vacuum Ironing and Blowing Board, Sleeve Bucks


Our Price: $2,599.00
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.

Features

  • Professional strength self-contained vacuum for fast drying
  • PND-3000AB also features blowing up-air
  • Vacuum swing arm and inter-changeable buck shapes
  • Heated pressing surface and swing buck
  • Optional conveyer and iron lifter assembly
  • Economically priced
  • Perfect for use with Hi-Steam mini boilers for a complete instant pressing department
  • Ideal for: tailors, alteration rooms, drop-off stores, clothing stores, valet service, tuxedo and bridal shops
Non-US Warranty: 30 days parts and labor.

Specifications

Model PND-3000A PND-3000AB
Voltage 120V 6.5 AMPS 120V 6.5 AMPS
Vacuum Area 47” x 15.75” x 9.9" 47” x 15.75” x 9.9"
Dimensions 60.3” x 17.25” 63.0” x 17.25”
Net Weight 145 lbs 175 lbs

Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.

Hi Steam PND1000AC1 Commercial Vacuum Table Heated Ironing Board Only 55x15" without MVP35 or SVP24 Steam Boiler Iron Shown in Picture

Hi Steam, PND 1000AC, Heated ,Vacuum Suction, Ironing Board, 55x15", Heated Surface, Foot Control, Folding Legs, (Like Reliable C91


Our Price: $599.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Ironing Board Only! Reduced $100 due to overstock in New Jersey warehouse. Optional Hi Steam MVP35 or SVP24 steam boiler irons shown, under Recommended Accessories below.

This Board is intended for Light Duty Commercial use.

Self-contained vacuum ironing board in a simple design saves space and time. Large ironing surface up to 55" x 15" results in faster productivity.

Folding legs allows you to adjust height of ironing board. Dark colored ironing cover resists stain and discoloration due to heavy use.

Made of durable aluminum that is rust-proof. Front rocker switch turns on power.

Included foot pedal controls vacuum suction like a third hand. Secondary stand holds iron and other ironing supplies while not in use.

  • Portable vacuum pressing table is ideal for alteration shops, tailors, dry cleaners, and sample making departments.
  • Strong built in vacuum motor that dries the fabric, ensuring a clean and crisp finish to your garment.
  • Standard features include an all metal design (for long life) a built in heating element, and a catch tray for longer garments.
  • Heated surface combined with steam removes wrinkles in fabrics
  • Folding legs allows you to adjust height of ironing board
  • Dark colored ironing cover resists stain and discoloration due to heavy use
  • Foot Pedal Vacuum Suction Control like a third hand
  • Made Of Durable Rust-Proof Aluminum
  • 55 x 15" Vacuum Ironing Board
  • Vacuum Area dimensions 43" x 15" x 9"
  • Iron Rest Platform on Right and Garment Catch Tray Underneath.
  • Replaceable cover and pad set
  • UL approved.
  • Portable- Folding Legs
  • Electricity: 120V / 6 AMPS / 700 Watts
  • Iron not included
  • Portable vacuum pressing table is ideal for alteration shops, tailors, dry cleaners, and sample making departments.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Self-contained vacuum ironing board in a simple design saves space and time
  • Large ironing surface up to 55" x 15" results in faster productivity
  • Heated surface combined with steam eliminates wrinkles in fabrics efficiently
  • Folding legs allows you to adjust height of ironing board
  • Dark colored ironing cover resists stain and discoloration due to heavy use
  • Made of durable aluminum that is rust-proof
  • Front rocker switch turns on power
  • Included foot pedal controls vacuum suction like a third hand
  • Secondary stand holds iron and other ironing supplies while not in use
  • Replaceable cover and pad set
  • Ironing Board dimensions 15" x 55" top
  • Vacuum Area dimensions 43" x 15" x 9"
  • Made in Italy
  • 120 Volts
  • 6 Amps
  • 700 Watt
  • Weight: 48.5 lbs

Hi Steam PND-2500A Heated Vacuum Ironing Board Table 53x16.5" +Sleeve Arm, Hot Iron Rest, Tray

Hi Steam, Commercial, Hi Steam PND-2500A Heated Vacuum Ironing Board  Table 53x16.5" +Sleeve Arm, Hot Iron Rest, Tray


Our Price: $1,499.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Are looking for a system to handle all your laundry needs? Then the Hi-Steam PND -2500A is for you!

  • Professional strength self-contained vacuum
  • Heated pressing surface
  • Vacuum swing arm and heated sleeve buck
  • Ship via UPS (2 boxes)
  • Economically priced
  • Perfect for use with HI-STEAM mini boilers for a compete, instant pressing department
  • Ideal for: tailors, alteration rooms, drop-off stores, clothing stores, valet service, tuxedo and bridal shops
  • Also Available -- PND-2500AB Vacuum + Blowing Board -- call for details

    This board is intended for Medium Duty Commercial use.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Model: PND-2500A
  • Electricity: 120V 5 AMPS 600 WATTS
  • Vacuum Area: 42" x 15" x 9"
  • Dimensions: 53" x 16.5"
  • Net Weight: 88 lbs
  • Gross Weight: 102 lbs

Hi Steam Commercial PND-98U Rectangular Heated Vacuum Ironing Board 31.5” X 49.2”, 2000 Watts, Specify 110V or 220V

Hi, Steam, Commercial, PND-98U, Rectangular, Vacuum, Board, 31.5, 49.2, 2000, Watt, Specify, 110V, 220V


Our Price: $1,960.00
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 5-7 business days.
Condition: New In Box

Features

Strong self-contained vacuum for faster drying, Heavy duty construction assures highest finishing quality. Heated main pressing surface
Non-US Warranty: 30 days parts and labor.

Specifications

  • Model: PND-98U
  • Voltage:120 V IPH (220V OPTIONAL) 60 HZ 2000 WATTS
  • Pressing Surface: 31.5” X 49.2”
  • Machine Dimensions: 59” WIDE X 32.25” DEEP
  • Optional swing arm and heated sleeve buck
  • Optional conveyer and iron lifter

    Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.

Hi Steam Commercial PND-5000B Vacuum Blowing Ironing Board & Iron* for Your Boiler, Choose 110V or 220V

Hi Steam, Commercial, PND-5000B, Vacuum, Blowing Board, 110V or 220V , Iron


Our Price: $7,999.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 3-4 weeks
Condition: New In Box

Features

  • Strong, self-contained vacuum
  • Adjustable up-air (blowing)
  • Swing arm and Interchangeable bucks
  • Exhaust chimney
  • Conveyor and iron lifter assembly + light
  • Automatic Height Adjustment of Main Pressing Surface and Sleeve Buck
  • Ideal for silk finishing, wedding gowns, pants creasing, and fine hand finishing
  • Compressed air required

  • *Steam/electric iron and solenoid valve.
Non-US Warranty: 30 days parts and labor.

Specifications

Model: PND-5000B
Electricity: (110 V, 1 Ph) or (220 V, 1 Ph) or (3 Ph, 60Cycle, 7 Amps)
Compressed Air Pressure Required: 80 PSI
Vacuum Motor: 3/4 HP
Dimensions: 65" (W) x 20 (D)
Vacuum Area: 50" x 20" x 7"

Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.

Walts FPC Floriani Press Cloth 14x28" Protects Fabrics & Embroideries

Walts, FPC, Floriani, Press, Cloth, 14, 28, Protect, Fabric, Embroidery, WHITE


Our Price: $9.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the same business day.Ground shipping guaranteed 3 days or less for contiguous US!
Condition: New In Box

Features

Floriani's Pressing Cloth is ideal for using and protecting your fabric and embroideries. It prevents unwanted sheen and never allows the design or fabric to burn. Using a Floriani Press Cloth will protect the embroidery thread from the surface of the iron while "setting" the color and stitch formation.

A recently revealed secret of the Floriani family is to “heat set” the embroidery design once it is sewn. Using a Floriani press cloth will protect the embroidery thread from the surface of the iron while “setting” the color and stitch formation. Your embroidery will be perfect after it is laundered! Now you can own the press cloth used and recommended by Walt himself! By using the Floriani Pressing Cloth, your embroidery will be perfect after it is laundered! All you need to do is iron the design flat using the pressing cloth. Cloth is 14 inches by 28 inches.

By using the Floriani Pressing Cloth, your embroidery will be perfect after it is laundered! All you need to do is iron the design flat using the pressing cloth. Cloth is 14 inches by 28 inches.

A recently revealed secret of the Floriani family is to “heat set” the embroidery design once it is sewn. Using a Floriani press cloth will protect the embroidery thread from the surface of the iron while “setting” the color and stitch formation. Your embroidery will be perfect after it is laundered! Now you can own the press cloth used and recommended by Walt himself!
Non-US Warranty: 30 days parts and labor.

Ace Hi AHR-14oz Demineralizer 1 Filter Bag of Resin for Gravity Feed Irons

Ace Hi AHR-14OZ Demineralizer Filter Resin for Silver Star ES85C, ES90C, ES300, AceHi AH100G, ES85, ES90, ES300 All Brands Gravity Feed Steam Irons


Our Price: $19.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Universal JP202 4-Pack Bags Demineralizer Water Filter Resin Granules (Sapporo)

Universal, Sapporo, JP202, 4 Pack, Demineralizer, Filter, Refill, Bags, 450 Grams, 1 Pound Each, removes minerals, from tap water, for Gravity Feed, Steam Irons


Our Price: $39.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

When your old demineralizer changes to darker color, a new demineralizer change is needed

Note: one refill required per bottle iron when refilling bottle iron resin. Change demineralizer when color turns dark.

QUANTITY OF 4 Demineralizer Filter Resin Bags
Non-US Warranty: 30 days parts and labor.

Consew 5Pk Best Buy Demineralizer Resin Filter Bags for Gravity Feed Steam Irons

Consew, 5Pk, Best, Buy, Demineralizer, Resin, Filter, Bags, Gravity, Feed, Irons


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Only $10 each with free shipping anywhere in the USA 48 States, This resin comes in a clear bags which is then packaged in white envelope, each bag contains 360 grams of demineralizer, which is less than 1 lb. (450 grams).
Non-US Warranty: 30 days parts and labor.

Naomoto HYS5 3Pk Demineralizer Filter Bags of Resin for Gravity Feed Irons

Naomoto, HYS-5, Demineralizer, Filter Resin, for Removing Minerals, & Sediments, from HYS, Gravity Feed, Steam Irons, - Minimum Order, Package of 3, Naomoto HYS5 Pack of 3 Demineralizer Filter Resin Bags for Removing Minerals & Sediments from Water going into HYS58 & HYS520 Gravity Feed Steam Irons


Our Price: $69.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features



  • Naomoto HYS-5 Demineralizer Filter Resin QTY 3
Non-US Warranty: 30 days parts and labor.

Silver Star SR-5 Steam Regulator Module, Adjustment Knob, 10Amps, 2.2Lb for Ace Hi AH-1000 AH-2200 AH-2300, Included w/AH-2100, AH-2300M Replaces SR-3

SR-5 Steam Regulator,  Module by Silver Star, 110/220V, 10A, Adjustment Knob, 1.1Kg for use with Ace Hi AH-1000, AH-2200 & AH-2300

27010: Silver Star SR-5 Steam Regulator Module, Adjustment Knob, 10A, 2.2 Lbs

Our Price: $99.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

  • It regulates the steam from the boiler into the electric steam iron
  • As a Complementary item for AH-2100 and AH-2300M irons,
  • It Uses Teflon Steam Hose or Rubber Steam Hose With Clamp
  • Steam Amount Can Be Adjusted by the Adjusting Knob
  • Electricity: 110V/220V, Weight:1.1 Kgs
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Silver Star ES-90-16108 Replacement Hose Only, Gravity Feed Irons

Silver, Star, ES-90-16108, Replacement, Hose, Only, Gravity, Feed, Irons

Silver Star ES-90-16108 Replacement Hose Only, Gravity Feed Irons

Our Price: $19.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

  • Silver Star gravity iron replacement hose .
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Naomoto HYS-5 Silicone Hot Iron Rest (soft) Part 1352108, Also for HYS 520 & HYS58 Gravity Feed Steam Irons

Naomoto, HYS-5 Silicone, Iron Rest, (soft), Part 1352108, for HYS 520, & HYS58, Gravity Feed, Steam Irons

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

This item is not sold separately and may only be purchased with a Naomoto HYS 520 Iron.
Non-US Warranty: 30 days parts and labor.

Naomoto HYS-5 Silicone Covered Hard Metal Iron Rest, Part 1352101 Also for HYS 520 & HYS58 Gravity Feed Steam Irons

Naomoto, HYS-5, Silicone Covered, Iron Rest, (hard metal inside ), Part 1352101, for HYS 520, & HYS58, Gravity Feed, Steam Irons

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

This item is not sold separately and may only be purchased with a Naomoto HYS 520 Iron.
Non-US Warranty: 30 days parts and labor.

Sapporo 30MG-12 Iron Shoe for use with the Sapporo SP95 Gravity Feed Iron

Sapporo 30MG-12 Teflon Iron Shoe for use with the Sapporo SP95

Availability: Usually leaves the warehouse on the same business day.
Condition: New In Box

Features

Non-US Warranty: 30 days parts and labor.

Ace-Hi 100Shoe Non Stick Iron Shoe for AH100G Gravity Feed Iron

Ace-Hi, Non Stick, Teflon, Replacement, Ironing Shoe, 100-Shoe, for AceHi AH100G Gravity Feed Steam Irons made by Silver Star Korea, Ace-Hi Non Stick Teflon Ironing Shoe 100-Shoe, for AceHi AH100G,Ace-Hi Non Stick Teflon Ironing Shoe 100-Shoe, for AceHi AH100G Gravity Feed Steam Iron Only


Our Price: $19.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

  • For use with the Ace-Hi AH100G Gravity Feed Steam Iron Only.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Segye IRS-600 PTFE Non Stick Shoe: SGB-600/700 Gravity Feed Steam Iron

Segye IRS-600 PTFE Non Stick Shoe: SGB-600/700 Gravity Feed Steam Iron


Our Price: $29.99
Prices are subject to change, and only current prices will be honored.

Availability: OUT OF STOCKGround shipping guaranteed 3 days or less for contiguous US!
Condition: New In Box

Features

  • For use with the Segye SGB-600 Gravity Feed Iron
Non-US Warranty: 30 days parts and labor.

Hi Steam TS-EFE55W Non Stick Ironing Shoe for EFE Gravity Feed Iron

Hi, Steam, TS-EFE55W, Teflon, Ironing, Shoe, for, Hi Steam, EFE, 55W, Gravity, Feed, Iron


Our Price: $29.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

For use with the Hi Steam EFE 55W N Iron

Not sold separately. May only be purchased with the High Steam EFE 55W Iron found here: http://www.allbrands.com/products/abp02311.html
Non-US Warranty: 30 days parts and labor.

AceHi 16108 Silicone Water Hose Tube, Springs, Ties for Gravity Feed Irons

Ace-Hi, 16108, Replacement, Silicone, Hose, Set, Gravity, Feed, Iron, connect, Water, Bottle, Nipple, Solonoid, Release, Valve


Our Price: $19.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

  • For use with the Ace-Hi Gravity Feed Steam Irons and most other brands.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

AceHi Silver Star 7-16100 Gravity Feed Iron Water Bottle, Filter Valve, No Hose

Ace, Hi, Silver, Star, Water, Bottle, Assembly, 7-16100, Bottle, 7-16010, Small, Filter, 16102, Valve, 16017, NO, Demineralizer, Clear, Hose, Gravity, Feed, Steam, Iron


Our Price: $29.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the same business day.Ground shipping guaranteed 3 days or less for contiguous US!
Condition: New In Box

Features

NOTE: NO Demineralizer or Clear Hose is included!



Proper Hose Connection Instructions Download (.PDF)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

AceHi Silver Star SF-100 Inline Water Filter for Gravity Feed Iron Hoses

Ace, Hi, Silver, Star, SF, 100, In, line, Water, Filter


Our Price: $14.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 3-4 business days.
Condition: New In Box

Features

Use this filter inline with your current Ace-Hi gravity feed hose.

For best results replace the filter every 3 months.
Non-US Warranty: 30 days parts and labor.

AceHi Silver Star SF-100 Inline Water Filter for Gravity Feed Iron Hose, Year's Supply (Pack of 4)

Ace, Hi, Silver, Star, SF, 100, In, line, Water, Filter, Pack, 4, year, supply


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 3-4 business days.
Condition: New In Box

Features

Use this filter inline with your current Ace-Hi gravity feed hose.

For best results replace the filter every 3 months.

This package comes with 4 filters, includes short hose connector at top between water bottle and filter.
Non-US Warranty: 30 days parts and labor.

Consew CES-16031 Steam Hose Only: Silver Star ES300 AceHi ES300 CES300

CES-16031, Silicone Replacement Hose, for use with the, Silver Star ES-300, Ace Hi ES-300, Consew CES-300, Gravity Feed Steam Irons


Our Price: $29.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Mary Ellens S60034 Best Press Clear Starch 6oz Non-Aerosol, Scent Free, Pump Spray Bottle, No Flake, No Clog or White Residue! Fabric Stain Shield

Mary Ellens Best Press Clear Starch S60034 6oz (Six Ounce) Non Aerosol, Scent Free Spray Bottle, No Flake, Clog or White Residue! Fabric Stain Shield


Our Price: $4.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the same business day.Ground shipping guaranteed 3 days or less for contiguous US!
Condition: New In Box

Features

There hadn't been a new product for ironing in years - and I got sick and tired of using aerosol starch! So now I've introduced a clear, crisp starch with a lovely scent that makes ironing more enjoyable. It's in a non-aerosol can, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.

It's in a non-aerosol can, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.
Non-US Warranty: 30 days parts and labor.

Specifications

You asked for it. Formulated for fragrant sensitive customers, it’s the same amazing product, but zero odor. It's in a non-aerosol spray bottle, so it's environmentally-friendly and you can see how much is left. Make ironing as pleasant as possible! No more mixing starch with water or environmentally-unfriendly aerosol cans that get clogged. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used. Available in a 16 oz. spray bottle.

Mary Ellen Best Press Clear Starch 16oz Spray Bottle 6959A +1 Gal Jug Refill 6959REF

Mary Ellens, Best Press, Clear Starch, No Scent, 16oz, Non Aerosol, Spray, 6959A, PLUS, Full Gallon, Refill, Bottle, 6959RE


Our Price: $44.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Sorry No Coupons. There hadn't been a new product for ironing in years - and I got sick and tired of using aerosol starch! So now I've introduced a clear, crisp starch with a lovely scent that makes ironing more enjoyable. It's in a non-aerosol bottle, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.

It's in a non-aerosol can, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.
Non-US Warranty: 30 days parts and labor.

Specifications

16oz Best Press Spray Scent Free Mary Ellen Products, Inc.

You asked for it. Formulated for fragrant sensitive customers, it’s the same amazing product, but zero odor. It's in a non-aerosol spray bottle, so it's environmentally-friendly and you can see how much is left. Make ironing as pleasant as possible! No more mixing starch with water or environmentally-unfriendly aerosol cans that get clogged. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used. Available in a 16 oz. spray bottle.

Best Press Scent Free Gallon Refill - 32 oz bottle
Makes 8–16 oz. Bottles! By popular demand! Our new gallon refill makes 8–l6 oz. bottles. Many customers have said, “If you don’t do a refill in a hurry the landfills would be piled high with 16 oz. clear spray bottles.” From a cost and environmental standpoint, a gallon refill makes sense.
Make ironing enjoyable!

Jiffy 1040 Hand Mitt, Steamers Safety Glove, Heavy Weight, Protective

Jiffy, 1040, Protective, Heavy, Weight, Hand, Mitt, Glove, using, Garment, Steam, Cleaner, Prevent, Scorching, Heat, Contacting, Skin


Our Price: $24.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

The Jiffy Hand Mitt allows you to steam your garments in seconds and stubborn wrinkles are easly removed with hand pressing before and after steaming.

Jiffy® Steamer is proud to offer the new Jiffy® Hand Mitt specifically designed to use with our products while steaming. As you know steam is hot, so use this protective mitt when steaming. The extra-heavy mitt, which is made of the 100% cotton terry cloth, has insulating properties to prevent penetration of steam. The Jiffy® Hand Mitt allows you to steam your garments in seconds and stubborn wrinkles are easily removed!

  • Designed to use with Jiffy products while steaming
  • Has insulating properties to prevent penetration of steam
  • Use this protective mitt when steaming
  • Extra-heavy mitt
  • 100% cotton tery cloth
Non-US Warranty: 30 days parts and labor.

Specifications

Jiffy Hand Mitt Product Sheet Download (.pdf)
Copyright © 1995-2017 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.