Any graphics software can be used for heat presses as long as it prints on heat transfer paper.

  • *Heat press size is 11.42" X 14.96"
  • Cup press can be used on standard 11 ounce cups
  • The base size is 3.34" X 3.81";
  • Plate press can work on size of 8" and base diameter is 4.92"
  • The heat part of cap press machine ranges 3.14"X5.51"

  • Items included Exchangeable Parts: one T-Shirt Press(30*30cm), one Mug Press(11cm),one Plate Press(81mm) and one Baseball Hat Cap Press(8*14cm)
  • Shovel Handle Design
  • Constructed with steel frame.
  • Adjustable timer and audible sound when preset time has been reached
  • Power Switch, high current circuit breaker
  • Silicon rubber base included
  • Timer/alarm starts automatically when the heat press is engaged
  • Extra thick heat plate provides even temperature and higher pressure
  • Easy to use Swing-away T-Shirt Heat press
  • Power on/off indicator switch
  • US Warranty 1 year limited warranty on defects in materials and workmanship.
  • Non-US Warranty: 30 days parts and labor
Specifications
Voltage:110V/60Hz
Power: 1300W
Temperature range: 0 – 599F
Time range: 0-999s
Gross weight: 57 lbs
Net weight: 52 lbs

Downloads:
Selecting between Celsius and Fahrenheit in Flat Heat Press (.pdf)
Manual for multi function heat press (.ppt)


The following is the instruction to change the temperature settings from Fahrenheit or Celsius.



Changing between Celsius and Fahrenheit

1. Press and hold set button until top display shows a red P and bottom display flashes 27 in green.

2. Press set button several times until display read LCH in red and 0 flashing green in bottom.

3. Press arrow up key until the display reads 1 in green.

4. Press set key- top display will show a red P and bottom will flash in green.

5. Press set key several times until display reads CLP on top in red and 1 or 0 in bottom display (1 means your machine is set to Fahrenheit- 0 means it set to Celsius).

6. Press arrow buttons to change from 1 Fahrenheit or 0 Celsius.

7. Press and hold set button until temp and time appear in the display.