Includes

icon

INCLUDED: Jiffy J-2 Original Garment Fabric Upholstery Steamer +$10 Tank Cleaner

Note: Hanger Hook Included, but not the hanger shown in picture which shows how it is used.
See Optional hanger sets under Recommended Accessories below.

Vertical ironing board for hanging trousers and other garments - mountable on any wall or door with bracket included. USA/Canada Only due to 42 Lb dimensional weight 6x26x51"

Jiffy J-2 Garment Steamer Features:
  • Quick 2-minute heat up time
  • 1300 Watts Heats Up In 2 Minutes
  • 1 Gallon Water Steams 1.5 Hours
  • 5 Times Faster Than Ironing For Removing Wrinkles
  • J-2 Steamer On Casters With Garment & Hose Hanger



  • Steams away wrinkles faster and without
  • ironing
  • No scorching or shining
  • Cast aluminum housing unit for durability
  • 360 degrees swivel casters allow freedom of movement

    Jiffy Steamer World Power Supply Configurations

    Jiffy Comparison Table


    Jiffy Owner's Manual

    Find more about Jiffy Repair Services

    Jiffy 0892A Steamboard Features:
    The Jiffy Steamer Steamboard is equipped with an eye screw that holds Jiffy’s professional garment hanger at the top of the steamboard. This sturdy hanger holds the clothing in place and provides a convenient workplace to steam. The board is covered with moisture-resistant fabric and attaches in 1 of 2 ways: 1) Directly to the wall with screws, 2) Hangs over a door with a bracket. Attachment options are included in the steamboard carton. Only UPS ground shipping available for this product. Not for export.

  • Steam Resistant
  • Heat-Resistant
  • Nylon Carpet Covering
  • Hang Board On Door Or Wall
  • Professional Hanger Located At Top Of Board
  • Eliminates Iron And Ironing Board
  • For Use With all Jiffy Steamer models



    Jiffy Steamer World Power Supply Configurations

    Find more about Jiffy Repair Services

  • Please note that the actual weight is 33 pounds, but because the shipping box is oversized at 51x6x26", UPS charges us for 70 pounds in the Oversize 2 category. We charge the same 70 pounds to you, not 33 pounds.
  • Manufacturer's US warranty 3 Year Warranty
  • Non-US Warranty: To view the warranty for this combo, please view specific warranty information on the individual product pages.
Specifications
Jiffy J-2 Garment Steamer Specifications:
  • Quick 2-minute heat-up time
  • Made in the USA
  • Will remove wrinkles from clothing, drapery, tablecloths, virtually any fabric
  • 1300 Watts of steaming power
  • Holds one gallon of water
  • 1.5 hours of continuous steam
  • Steams away wrinkles faster and without ironing
  • No scorching or shining
  • Cast aluminum housing unit for durability
  • Lightweight, flexible hose
  • New European design steam head and hanging system
  • Re-designed with the user in mind
  • 360 degrees swivel casters allow freedom of movement
  • New handle features an ergonomic grip for more comfortable operation
  • High heat and impact resistant nylon makes this steam head the most durable available
  • Shatterproof water bottle holds 1-gallon of water in cast aluminum housing
  • Steaming head made of glass-filled nylon
  • Backed by Jiffy's incredible customer service - should your steamer need repair, send it to Jiffy and they will repair and ship the unit within 24 hours from its arrival to their repair facility
  • Safety wiring feature temporarily turns the unit off when it runs dry
  • Removes wrinkles up to five times faster than convential ironing
  • Removes wrinkles from hats and other hard-to-treat items
  • Treat furniture upholstery to achieve showroom finish
  • A true portable workhorse!
  • Your dry-cleaner knows, steam is the gentlest, safest, most efficient method to remove wrinkles
  • Numerous available attachments

    Additional Information:
    Please refer to the "How to Steam Guide" (.pdf) for further information on how to use your steamer.


    Jiffy World Power Supply Voltage Configurations (click to enlarge)



    Jiffy 0892A Steamboard Specifications:
  • Hang or attach press board on any hard surface
  • Iron in pleats or creases effortlessly
  • Neatly press in a new look to altered garments
  • Strong, pressed wood construction and moisture resistant carpet cover acts as a vertical, padded ironing board, allowing you to steam-press selected items or selected areas
  • A definite must for people who sew for a living or clothing retail stores
  • Extremely convenient and comfortable for home-use
  • Can't rust or warp, dependable and long-lasting
  • Made from steam-resistant, heat-resistant, nylon carpet covering
  • Carton Dimensions: 6 in x 25 in x 50 in
  • Assembled Dimensions: 3/4 in x 24 in x 48 in
  • Carton Weight: 36 pounds



Included Accessories
  • J-2 Base Unit
  • Water bottle
  • Steam head and hose attachment
  • Assembly Wrench
  • Owner's manual
  • Rod set
Other Images

icon This product includes the parts shown in the image

icon Warm, moist steam removes wrinkles from drapery and window treatments from the finest sheers to the heaviest weaves making them look their best.

icon No more back pain! Steam is more convenient then breaking your back over a hot ironing board.

icon Hang pants by the cuff for quick and easy wrinkle removal

icon Care for delicate and difficult-to-treat apparel in a matter of minutes


Competitive Advantages

1. Made in the USA.
2. Our products are the originals.
3. We invented the product and process.
4. We are the industry leader.
5. Oldest (since 1940) and largest (currently 1,000 dealers serving over 45 countries) garment steamer manufacturer in the world.
6. 3-Year Warranty on all Jiffy Steamer products. This is the best in the industry and represents our confidence in the products we manufacture.
7. 24 / 7 / 365 ordering capabilities through www.allbrands.com
8. Next day delivery option available (even on Saturday in some zip codes).
9. A warm, friendly, knowledgeable and LIVE voice every time you call during business hours. As a matter of fact, the customer service representative that you speak with has completed a 2 week training course and knows how to build and repair Jiffy Steamers…they can help you.
10. Should your unit require repair, we have a 24 hour repair turn-around time…your steamer will be repaired and back on a UPS truck within 24 hours after your approval of the repair quote.
11. All our steamers are fully customizable with a host of options for steam head / hose attachments, cord plugs and voltage.
12. Each Jiffy Steamer is handcrafted in our Union City, Tennessee factory. We never compromise on quality, materials or workmanship. Take a look “under the hood” of our products. You will find stainless steel, brass, copper, incoloy and silicone braided color-coded wiring. This quality is simply not found in competitor’s products.
13. We have an ultra-low products return percentage. Every unit is 100% tested and steamed before it leaves our assembly line.
14. Our staff is experienced…more than any other garment steamer manufacturer in the world with over 603 years (and counting) of manufacturing knowledge.
15. Our staff is dedicated…with an average tenure of 17 years employment at our company for our associates.
16. It takes, on average, 52 unique stages to build a Jiffy Steamer product within our factory. Care is taken at every step.
17. Use what the professionals use…Jiffy Steamers…our products can be found in over 95% of the chain retail clothing stores.
18. We build commercial-grade units across all of our product lines…travel, residential and industrial categories.
19. A new Jiffy Steamer is put into use, somewhere around the globe, every 6.57 minutes…you are in good company!
20. Not everyone can iron, but anyone can steam! The process is easily learned and mastered.
21. Our products are protected by multiple patents and trademarks.


A Closer Look into Garment Care

Steaming vs. Ironing

Your clothes are an investment. Don't you want to apply the safest, gentlest method for removing wrinkles?

To determine which method of removing wrinkles is the better option for fabric care, steaming and ironing were put to the test.

  • Two identical 6" x 6" squares of black wool were purchased from a local fabric store.
  • We steamed sample "A" for 1 minute with a Model J-2000 Jiffy ® Steamer.
  • Sample "B" was ironed for 1 minute, on the proper heat setting, with a top-of-the-line residential iron.
  • We then bagged, labeled, and submitted both samples to MVA Scientific Consultants in Norcross, Georgia for detailed magnification.

The Scanned Electron Microscope (SEM) images show any damage that may have occurred.

Sample A - Steamed Sample A - Steamed
500x 1000x

Sample B - Ironed Sample B - Ironed
500x 1000x

The fibers in sample "A" are in near perfect condition due to the gentle nature of steam. However, the fibers in sample "B" are clearly distorted. You can easily recognize the damaged fibers caused by just one application of the iron's hot sole plate.

Unlike ironing, steam actually relaxes the fibers rather than crushing them.

Now that you have a closer look into garment care, use what the professionals use…
a JIFFY ® STEAMER!

Steam Kills Dust Mites

Do you or family members suffer from allergies?

A 2003 Environmental Protection Agency report stated that childhood asthma rates are doubling. The EPA report is the agency’s second comprehensive look at the environmental hazards to children’s health. The finding showed the percentage of children getting asthma has doubled in two decades, rising from 3.6 percent in 1980 to 8.7 percent, or 6.3 million children by 2001. The exact cause for the increase is unknown but researchers state a number of factors have been studied. Those range from exposure to dust mites, cockroaches and pesticides to tobacco smoke, ozone and soot. EPA officials are examining the role of indoor air pollutants, such as dust mites, especially since there have been modest improvements since 1990 in lessening exposure to outdoor air pollutants. The reduction of indoor factors will be the key to reversing this trend. 1

Dust Mites are microscopic creatures related to the spider family. They are invisible to the human eye and are about 0.3mm in length. They live on human skin flakes. They are most prevalent in the bedroom where millions can exist in your mattress, boxspring, pillows and comforters. They are also found in upholstered furniture, carpeting and other fabric items. Dust mites produce 20 or more fecal pellets per day, which is the primary allergen to humans. We inhale these allergens while sleeping and during periods when these particles become airborne such as when vacuuming and disturbing the infested fabrics.

It has been proven that dust mites and their allergen Der p1 are a major factor in allergic reactions. A key to controlling allergic reactions is controlling the dust mite population in your home. Lower mite populations lower the amount of mite allergen, Der p1. Other clinical studies have revealed that avoidance of dust mite allergens in early childhood can prevent the onset of asthma in adults. A study as reported in the Journal of Clinical and Experimental Allergy tested the feasibility and effectiveness of using a portable, domestic steamer for the control of dust mites, its effects on mite populations and concentration of the allergen Der p1.2

A domestic steamer was used to treat carpet squares that were seeded with a known number of dust mites. The number of live mites was monitored for 4 months and in 8 test squares and 8 control squares. Measurement of mite populations and allergen levels were taken before and after steaming with a domestic steamer.

The results showed two significant findings. No live mites were found in any of the eight steam-treated carpet squares. In contrast, the numbers of live mites extracted from the eight-control squares rose from a mean of 11 on day 3 to 185 four months later. The fact that no live mites were found in any of the eight steam-treated carpet squares at any time during the study shows that steaming is a highly efficient method of killing house dust mites. More significant for allergy sufferers is the measurement of the allergen Der p1. There was no difference in the concentration of Der p1 in dust samples of untreated carpets, but in those which had been steam cleaned there was an average 87% fall in the concentration of Der p1.

The study concluded with:
"Steaming requires nothing more than water and heat and therefore is non-polluting compared with mite eradication methods that require the use of detergents and other chemical agents. Furthermore, the design of domestic steamers, [such as the Jiffy® Steamer], renders it safe for domestic use as long as the operating instructions are followed. In addition, we observed no damage, or shrinkage of the fabric, nor discoloration and the carpet dried within a half-hour of treatment. There is no indication of prolonged retention of residual moisture, as with wet-vacuum cleaning which may promote mite population growth.

Finally, steaming as reported herein is the only method of house dust mite control that combines effective killing of mites and substantial reduction in allergen concentrations within a single system. These factors, taken together, render domestic steamers, [such as the Jiffy® Steamer], especially suitable for the management of dust mites and their allergens in the homes of allergy sufferers."

For additional information and reading on maintaining a healthy home, you may want to consider a book by Jeffrey C. May titled "My House Is Killing Me! The Home Guide for Families with Allergies and Asthma".3

Helpful Links for Dust Mite/Asthma Information:
• http://www.epa.gov/iaq/asthma/index.html
• http://www.epa.gov/iaq/asthma/triggers/index.html
• http://www.ozemail.com.au/~lblanco/

1 As reported by Associated Press February 26, 2003
2 MJ Coloff, C Taylor, TG Merrett. The use of domestic steam cleaning for the control of house dust mites. Clinical and Experimental Allergy 1995 25: 1061-6.
3 May, Jeffrey C(2001). My House is Killing Me! The Home Guide for Families with Allergies and Asthma. John Hopkins University Press.

Regina, Indiana
was very impressed with ALLBRANDS.com. The prices are great and I received my order quickly. My husband and I were in business for 23 years and then sold the business. It is so nice to see that there are some companies that are still interested from their customers how they can improve. Thanks Mr. John Douthat for your interest in customer service.

Gerald, Texas
In the product presentation, I wasn't sure if I could use the garment steamer without the steamer board. I got the board, but my wife says it is too heavy for her to routinely use, so she simply hangs the garments on the door on a hanger and steams them this way. I wish now that I could have only bought the Steamer without the board. I feel this is my own mistake and nothing on your part. I just wasn't familiar with the item and didn't know exactly how it would work without the steamer board. thanks, Gerald