April 19, 2024

Westalee WT-BS Borders Sampler 5pc Template Set, Continuous Rope and Echo 2.5C, Borders 2-3 and CBL3 2-3, Heart Borders 2pc Set

Westalee, WT-BS, Borders, Sampler, 5, piece, Template, Set

80228: Westalee WT-BS Borders Sampler 5pc Template Expansion Pack Set

Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 1-2 weeks.
Condition: New In Box

Features

Includes: Continuous Rope & Echo 2.5C, Continuous Borders 2-3 and CBL3 2-3, and Continuous Heart Borders 2pc set. Use with a Ruler foot for Quilting on Domestic and Long Arm Machines

Ruler foot is not included and must be purchased separately if you do not already own the foot

Attention Bernina Owners: If you are currently using the Bernina #72 Ruler Foot, instead of the Westalee Ruler Foot, please specify that in the brand and model of machine question, or in the comments of your order, since that foot could require a different thickness of Westalee ruler.
Non-US Warranty: 30 days parts and labor.

Specifications

A sample of continuous borders to complete quilts, table runners and other projects.

Template patterns and design sizes:
Double row of closed loops: 2"W x 3"H
Elongated loop: 2"W x 3"H
Heart
Rope: 2-1/2"H x 5"W, optional echo built into template

Includes:
4 templates
Instructions

Designed to be used with the Ruler Foot and Template Set (sold separately)

You will be asked to provide your machine make, model, & phone number upon ordering to ensure the receipt of the correct thickness of templates to work with your ruler foot. Without this information, we cannot proceed with your order. You will be contacted if there are questions. Thank you.

Bernina owners with the Bernina #72 foot, you need to order the Longarm version of this template (#BSTLA - Longarm Border Sampler Template Expansion Pack)

Additional Shipping Information:
Ships direct from manufacturer
Please allow up to 2 weeks for delivery
Cannot ship 2nd Day Air or Rush Delivery

Westalee WT-CHB Small Continuous Heart Border Tool Template, 2pc Tool: 2" x 1", 3" x 1-1/2"

Sew, Steady, wt-chb, Westalee, Continuous, Heart, Border, Tool, quilting, template

79205: Westalee WT-CHB Small Continuous Heart Border Tool Template 2pc Tool

Our Price: $19.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 1-2 weeks.
Condition: New In Box

Features

It is funny how 1 problem leads to another, but if you work at it hard enough the solution to both can lead to so much more.

In 2008 when we began making templates for Longarm quilting, it quickly became obvious that quilters had difficulty stitching around the outside of circles and other shapes. I have always believed that it is much easier to draw inside a shape than around the outer edge. So we designed our templates to be stitched around the inside.

This left another problem, longarm machines could not entre the inside of the template. The answer to this problem was the invention of the unique Westalee Design Key System, a key that when removed allows the ruler foot to be placed inside the template, when the key is replaced the opening is closed and the quilting line can be sewn without any unsightly flat spots.

Ruler foot is not included and must be purchased separately if you do not already own the foot

The Sew Steady Westalee Templates and Accessories are custom made to order, and usually leave the warehouse in 5-7 business days after your order is placed
Non-US Warranty: 30 days parts and labor.

Specifications

These templates will create a variety of designs that can stand alone or be used to offset and echo a specific design.
1) Place stable tape on the underside of your template at locations that would be pressure points when holding the template in place while sewing

2) Determine the desired placement of your template design within the block

3) Place the template at the beginning point of your desired design – make note of the markings on the template that you are using to create a consistent design
a. Make sure that your needle is in the middle of the foot to insure that you are sewing ¼ inch off the template edge
b. Place the ruler foot snugly against the template and pull your bobbin thread to the top
c. Begin sewing keeping the ruler foot touching the template, and tracing around the outside edge of the template
d. Once you are at the end of the template leave the needle down and move the template, line back up on the markings you selected and repeat this pattern until the end of the design, or the end of the block

4) You may also use the dashed etched markings on the template to echo and / or offset your design (see A) by lining up the template on the stitch line you just made then use the selected etching on the template to create the echo or offset design.

Westalee WT-CHB-2 Large Continuous Heart Border Tool Templates, 2-pc Tool: 4" x 2", 6" x 3"

Sew, Steady, WT-CHB-2, wt-chb, Westalee, Continuous, Heart, Border, Tool, quilting, templates


Our Price: $29.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 1-2 weeks.
Condition: New In Box

Features

It is funny how 1 problem leads to another, but if you work at it hard enough the solution to both can lead to so much more.

In 2008 when we began making templates for Longarm quilting, it quickly became obvious that quilters had difficulty stitching around the outside of circles and other shapes. I have always believed that it is much easier to draw inside a shape than around the outer edge. So we designed our templates to be stitched around the inside.

This left another problem, longarm machines could not entre the inside of the template. The answer to this problem was the invention of the unique Westalee Design Key System, a key that when removed allows the ruler foot to be placed inside the template, when the key is replaced the opening is closed and the quilting line can be sewn without any unsightly flat spots.

Ruler foot is not included and must be purchased separately if you do not already own the foot

The Sew Steady Westalee Templates and Accessories are custom made to order, and usually leave the warehouse in 5-7 business days after your order is placed
Non-US Warranty: 30 days parts and labor.

Specifications

These templates will create a variety of designs that can stand alone or be used to offset and echo a specific design.
1) Place stable tape on the underside of your template at locations that would be pressure points when holding the template in place while sewing

2) Determine the desired placement of your template design within the block

3) Place the template at the beginning point of your desired design – make note of the markings on the template that you are using to create a consistent design
a. Make sure that your needle is in the middle of the foot to insure that you are sewing ¼ inch off the template edge
b. Place the ruler foot snugly against the template and pull your bobbin thread to the top
c. Begin sewing keeping the ruler foot touching the template, and tracing around the outside edge of the template
d. Once you are at the end of the template leave the needle down and move the template, line back up on the markings you selected and repeat this pattern until the end of the design, or the end of the block

4) You may also use the dashed etched markings on the template to echo and / or offset your design (see A) by lining up the template on the stitch line you just made then use the selected etching on the template to create the echo or offset design.

Sew Steady WT-PB Westalee Persian Border Templates -3 Piece Nested Tool Set

Sew Steady, WT-PB, Westalee ,Persian, Border,Set ,3 Piece Set


Our Price: $24.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 1-2 weeks.
Condition: New In Box

Features

Persian Border 3 nested tool sizes 2” x 4”, 3” x 6”, 4” x 8”. Made from Clear Cast Acrylic 6mm thick. The 3 sizes can be integrated to provide great effects on your borders.

Ruler foot is not included and must be purchased separately if you do not already own the foot

Attention Bernina Owners: If you are currently using the Bernina #72 Ruler Foot, instead of the Westalee Ruler Foot, please specify that in the brand and model of machine question.
Non-US Warranty: 30 days parts and labor.

Sew Steady WT-PB-2 Westalee Persian Border Set 2 -3 Piece Set

Sew Steady, WT-PB-2, Westalee ,Persian, Border,Set ,3 Piece Set


Our Price: $26.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 1-2 weeks.

Features

Persian Border Tool Set 2 is a 3-piece nested tool set. Creates designs measuring: 2” x 1”, 4” x 2”, 6” x 3”. The 3 sizes can be integrated to provide great effects on your borders.

Ruler foot is not included and must be purchased separately if you do not already own the foot

Attention Bernina Owners: If you are currently using the Bernina #72 Ruler Foot, instead of the Westalee Ruler Foot, please specify that in the brand and model of machine question.
Non-US Warranty: 30 days parts and labor.

Sew Steady Westalee CBL Continuous Loop Borders, Select Template Ruler Size 2" or 3" Wide Patterns

Sew, Steady, Westalee, CBL, Continuous, Loop, Borders, Template, Ruler, Sizes, free, motion, quilting, no, long, arm


Our Price: $19.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 1-2 weeks.
Condition: New In Box

Features

It is funny how 1 problem leads to another, but if you work at it hard enough the solution to both can lead to so much more, In 2008 when we began making templates for Longarm quilting, it quickly became obvious that quilters had difficulty stitching around the outside of circles and other shapes. I have always believed that it is much easier to draw inside a shape than around the outer edge. So we designed our templates to be stitched around the inside.

This left another problem, longarm machines could not entre the inside of the template. The answer to this problem was the invention of the unique Westalee Design Key System, a key that when removed allows the ruler foot to be placed inside the template, when the key is replaced the opening is closed and the quilting line can be sewn without any unsightly flat spots.

Ruler foot is not included and must be purchased separately if you do not already own the foot

The Sew Steady Westalee Templates are custom made to order, and usually leave the warehouse in 5-7 business days after your order is placed

Non-US Warranty: 30 days parts and labor.

Specifications

These templates will create a variety of designs that can stand alone or be used to offset and echo a specific design.
1) Place stable tape on the underside of your template at locations that would be pressure points when holding the template in place while sewing

2) Determine the desired placement of your template design within the block

3) Place the template at the beginning point of your desired design – make note of the markings on the template that you are using to create a consistent design
a. Make sure that your needle is in the middle of the foot to insure that you are sewing ¼ inch off the template edge
b. Place the ruler foot snugly against the template and pull your bobbin thread to the top
c. Begin sewing keeping the ruler foot touching the template, and tracing around the outside edge of the template
d. Once you are at the end of the template leave the needle down and move the template, line back up on the markings you selected and repeat this pattern until the end of the design, or the end of the block

4) You may also use the dashed etched markings on the template to echo and / or offset your design (see A) by lining up the template on the stitch line you just made then use the selected etching on the template to create the echo or offset design.

2 Sets also available:
Small Set (includes 1 each of: WT-CBL 2-1; WT-CBL2-2; WT-CBL2-3; WT-CBL2 3-1; WT-CBL2 3-2; WT-CBL2 3-3; WT-CBL32-2; WT-CBL3 2-3)
Large Set (includes 1 each of: WT-CBL 2-4; WT-CBL2-4; WT-CBL2-5; WT-CBL2-6; WT-CBL23-4; WT-CBL23-5; WT-CBL23-6; WT-CBL32-5; WT-CBL32-6 )





Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.