Hoover F7452900 SteamVac™ All Terrain carpet and hard floor cleaner with heat. Patented SpinScrub™ brushes and powerful 12-amp motor.

Heated cleaning; Auto Rinse™ feature; Dual V™ nozzle technology; SpinScrub™ hand tool. All-terrain cleaning feature designed to clean a variety of surfaces in your home.

Auto Rinse feature rinses your carpet and hard floors, leaving less detergent residue behind. 2-tank system separates used water from clean solution for a spotless clean. Automatic detergent mixing system so you just pour and go! Let the machine do the mixing for you. Heated Cleaning directly applies heat to the floor where it’s needed most. 30' power cord. 8' hose and removable tool caddy.
  • US Warranty 1 year limited warranty on defects in materials and workmanship.
  • Extended US Warranty: Extended Warranty Available
  • Non-US Warranty: 30 days parts and labor
Specifications
Technical Information
  • Dust Collection: Bagged
  • Dust Capacity: 4 quart
  • Cleaning Width: 13"
  • Cable Length: 30 ft
  • Hose Length: 8"
  • Attachments: Brush
  • Attachments: Turbo Tool
  • Attachments: Hose
  • Floor Type: Hard Floor

    Power Description
  • Input Voltage: 110 V AC
  • Input Current: 12 A

    Miscellaneous
  • Additional Information: On Board Tools
  • Heated Cleaning
  • Powered Hand Tool
  • Auto Rinse technology
  • Brushed Edge Cleaning
  • Dual V Nozzle technology
  • Patented SpinScrub Brushes

    Capacity:
  • Dirty Water: 1 GAL
  • Clean Water: 1 GAL
Included Accessories
Hard floor package - everything you need to clean your hard floors. Includes: hard floor squeegee, SpinScrub brushes for hard floors, and large, soft wheels
Carry handle
Eight foot hose and removable tool caddy
Edge cleaners
20' power cord
Cleaning solutions included: Floor-to-Floor and Ultra Detergents included
SpinScrub hand tool
Thirteen inch nozzle
Powerful 12-amp motor provides maximum suction and cleaning power
No pickup at nozzle?

1. Clogged inlet screen
1. Remove Recovery Tank and check for debris on screen.
2. No suction at screened inlet
2. Check to insure that the handle is in the up position. This model is designed with a valve that shuts suction off when the handle is lowered all the way to the down position. The valve arm is actuated by the handle. Check for a stuck or broken valve. If this checks out, check the motor.
Suction at this inlet should measure approx. 55” of water.
3. Recovery Tank not seating against seal
3. Check to insure recovery tank is properly seated and is not warped or damaged.
4. Tool Door broken or missing
4. Check to insure that the Tool Door is closed and not damaged. Also check the condition of the seal.
5. Tubing clogged
5. Check for suction at tool door opening and again at the nozzle opening.
6. Recovery Duct missing or damaged
6. Lower Handle and check the duct that runs from the Hood back to the suction Hose.
7. Front Nozzle Plate missing or improperly
7. Check for damaged or missing Front Nozzle Plate. Properly assembled. assembly is outlined in the owner manual.
8. Front Nozzle Plate seal damaged
8. Check and replace if damaged.

Bundle & Save

Get additional savings when you purchase any of these items along with this product.