*Note. The gap between two pins to hold a machine onto a flatbed cabinet or carrying case is 9 9/16" inches or 24.3cm from center of left hinge pin hole to center of right hinge pin hole. JohnMD
- 21 Stitches Up To 2000 Stitches Per Minute Speed
- Solid Metal Construction
- Built-In 5 Step Bartack Buttonhole
- Knee Lever For For Presser Foot Lift
- Built-In Darning Mechanism For Free Motion
- Flatbed Zig Zag Machine
- Made By Bernina In Thailand
- Uses 16x231 or 257/287 needles up to size 18
- US Warranty 90 Days labor on defects in materials and workmanship.
- Non-US Warranty: 30 days parts and labor
- Maximum sewing speed up to 2,000 stitches per minute
- 21 utility and satin stitches
- 5 needle positions, left to right
- All Metal Full rotary industrial style hook
- Locked in straight stitch
- Rigidly guided needle bar on zigzag
- Built-in bobbin winder works when sewing or not sewing
- Built-in retractable drop feed-dog lowering mechanism
- Built-in darning device hopping foot for free motion
- Built-in button hole with utility, decorative, zig-zag and straight stitches
- Universal fabric pressure for all fabrics from sheer to thick
- Presser feet: zipper, blind stitch, embroidery, zig-zag, darning and button hole
- Hand wheel clutch release
- Mounted presser foot lifter – knee operated lifter for raising and lowering the presser foot. Also has a raised stop position which can be released with the knee lever.
- Belt guard on the hand wheel
- Stitch length: forward and reverse up to 6mm
- Uses Organ 16x231 and 16x257 needles
- Base Plate: 373 x 178 mm
- Passage Space: 210 x 104 mm
- Hook: double rotation, transverse
- Compatible with Bernina feet #1-60
- Stitch length: up to 6 mm forward/reverse
- Stitch width: up to 4.5mm
- Needle positions: 5
- Presser foot lift: 7.5 mm
- Handwheel belt track: approx. 80 mm
- Zipper foot
- Blind stitch foot
- Embroidery foot
- Zig-zag foot
- Darning foot
- Buttonhole foot
The Tacsew 950 industrial sewing machine is the same as the Bernina 950 and comparable to the Refrey 537 which uses regular household single and double needles.
You can save by getting the 950 under the Tacsew industrial label rather than the Bernina label. They are both made by Bernina in the same factory with the same specifications, accessories and are exactly the same other than the label. The Bernina goes thru home sewing machine dealers and the Tacsew goes thru industrial dealers.
You can only use the Bernina ruffler with low shank short adaptor on the Bernina Tacsew 950 which will not take industrial high shank attachments. You can use other generic low shank feet on the Bernina Tacsew 950 if you already have or purchase the Bernina regular low shank adaptor, which is a little longer than the ruffler adaptor.
AllBrands.com is an independent dealer not associated with Bernina or Bernette.
