• Automatic heat press machine, the upper heating board opens up automatically when reaching the set time and temperature, and the alarm will sound at the same time
  • Rugged and durable for years of trouble-free performance
  • Use to transfer onto T-shirts, sweatshirts, mouse pads, license plates, magnetic material, bags, and much more!
  • Opens up approximately 70 degrees
  • Press items up to 3/4" Thick
  • Adjustable thermostat
  • Heat indicating light
  • Hydraulic Mechanism for Easy Operating
  • Reduce operation fatigue
  • Unique design, modern style, using advanced air spring to achieve more even pressure
  • Adjustable digital timer
  • Digital read-outs
  • US Warranty 1 year limited warranty on defects in materials and workmanship.
  • Non-US Warranty: 30 days parts and labor
  • Voltage: 110V/60Hz
  • Power: 1800W
  • Temperature range: 0-399℃ / 32-750 °F
  • Time control: 0-999 Seconds
  • Work Area- 16"x20"
  • Emergency Stop
The following is the instruction to change the temperature settings from Fahrenheit or Celsius.

Changing between Celsius and Fahrenheit

1. Press and hold set button until top display shows a red P and bottom display flashes 27 in green.

2. Press set button several times until display read LCH in red and 0 flashing green in bottom.

3. Press arrow up key until the display reads 1 in green.

4. Press set key- top display will show a red P and bottom will flash in green.

5. Press set key several times until display reads CLP on top in red and 1 or 0 in bottom display (1 means your machine is set to Fahrenheit- 0 means it set to Celsius).

6. Press arrow buttons to change from 1 Fahrenheit or 0 Celsius.

7. Press and hold set button until temp and time appear in the display.