The i500 is the #1 choice of drapery professionals. It has become the industry standard for those seeking a high quality, mid size ironing station. The i500 establishes a new benchmark for features, ease of use, quality of components and value.

The i500 excels at producing quality, dry, pressurized steam. Pressurized steam is the fastest and most efficient way of ironing. It allows the fibers of the fabric to be softened quicker, with the weight and heat of the iron laying the fibers down flat. This creates the crisp and clean finish demanded by drapery professionals.

Thermostat Reset Button
Say goodbye to burnt out heating elements! The thermostat reset system is the ultimate protection for your investment, automatically shutting-off the heating element when the water is low.

11.5 Ft Steam Hose
The i30/3/120V iron with quick connects and 11.5 ft. steam hose is lightweight (3.9 lb.), comfortable (cork handle) and uses the same high standard parts (thermal fuse, thermostat) that has made it the #1 choice of drapery professionals.

Four Safety Systems
The i500 has 4-safety systems including a pressure switch; probe safety thermostat on the heating element, safety cap with safety valve and a low water indicator.

• .66 gallon, 2.5 L water capacity
• 1800W electrical (iron and boiler)
• Low water light indicator
• Regular tap water
• 50 PSI, 3.5 bar operating pressure
• 12-gauge heavy-duty wiring
• Stainless steel tank and outer casing
• Copper heating element
• Carrying handle
• Silicone iron rest
• 10-15 minute heat up time
• Water level stick
• Up to 4 hours of continuous steam
• Rated for up to 8 hours of use per day


Reliable Warranty Information (.PDF)
  • US Warranty 1 year parts, 90 days labor on defects in materials and workmanship.
  • Non-US Warranty: 30 days parts and labor
Specifications
Electrical: 120V or 220V
  • Water capacity: .66 U.S. gallons – 2.5 L
  • Operating pressure: 50 PSI – 3.44 bar
  • Boiler & iron elements: 1000W / 800W
  • Electrical cord length: 7' / 5'
  • Power consumption: 15 amps
  • Tank construction: Stainless steel
  • Low water indicator: Standard
  • Steam connector type: Quick-release
  • Net weight: 18.5 lb – 8.4 kg (with iron)
  • Shipping weight: 19.25 lb – 8.7 kg
  • Product dimensions: 16" x 9.25" x 9.75"
  • Shipping dimensions: 19.5" x 12.25" x 13.75"
  • Electrical approval: cETLus
  • Country of origin: Italy
  • Warranty: Limited 1 year, Lifetime Tank
What do I do when the iron is leaking water?
The temperature regulator is set too low; increase the settings. You may have too much water in the tank. Try emptying some water out and try again.

What do I do when there is no steam from the iron?
The steam valve may be set too low or turned off. Open the steam valve (2) full complete turns. Solenoid in the boiler could be defective.

What do I do when the steam is leaking at the filler cap?
Replace the filler cap washer with a new one, put the new washer in the retaining ring and reinstall. If it is still leaking water, you will need to replace the filler cap.

How do I drain the water from the i500 boiler?
Unplug the boiler and wait until it’s cold (no steam pressure) Turn the filler counter clockwise and remove it slowly. Turn the boiler over and drain the water.

How often should I clean and flush the boiler?
The boiler should be cleaned once a week or as often as needed (depending on the water quality).

What is the pressure gauge setting?
50 PSI.