Note: New Brother BSL S-6200A has arrived! We put all 4 Boxes on a wood pallet, shrink wrap and strap to prevent damage in shipping.
New Generation Built-in type motor driven Single Needle Straight Lock Stitcher with Thread Trimmer.
Comes as 220V. Or, add Transformer included for use with 110V Power Source.
Comes with Knee Lever for Presser Foot Lift. You can add the Optional Auto Foot Lift: Brother PF-2S Auto Foot Lift for S6200A Auto Backtack, Needle Positioner, Thread Trim Industrial Sewing Machine & Knee Lever, Requires Air Compressor
S-6200A has high energy saving and exceptional responsiveness with an original motor and a control box developed by Brother. High quality sewing has been realized with the performance of S-6200A, which contributes to improving productivity. The power consumption of S-6200A has been reduced by 41% compared to the V-belt driven system(with an AC servo motor).
With an original motor and a control box developed by Brother, featuring:
- High reliability
- High energy saving and reasonable price
- New generation built-in type motor driven single needle straight lock stitcher with thread trimmer
A downsized and flat control box providing a much
larger leg space to be utilized
A downsized and flat control box can provide much larger space leg space to be utilized. The efficiency of the operation has been improved.
Exceptional responsiveness for comfortable sewing
The smooth sewing has been realized. The start of sewing has 35% improved and stopping of sewing has 17% improved
compared to the SL-2110.
The machine speed at sewing start can be set by operator’s preference
Improving the efficiency of operation
Minimum lubrication to the needle bar and thread take-up area
Supplying the minimum lubrication to the needle bar and thread take-up area. The machine arm is equipped with the oil stopper plate to protect the needle bar and thread take-up area from oil spatters of the feed eccentric wheel area. Oil leakage from the needle bar can be prevented, realizing clean sewing. Also, sewing products will not be stained without V-belt.
- Start backtack
- End backtack
- Continuous backtack
- Needle breakage prevention
S6200A shown with optional Racing PL and PS puller
John, You are correct that you only need to change plate, feed dog, and foot (smaller holes so thinner fabric will not be pushed down into the holes causing jams.JMD)
Here are the two spec’s and part numbers:
*S6200A-405 NEEDLE PLATE H26 150792101 H26 1 FEED DOG 150793001 1 PRESSER FOOT ASSY 150789101 (for medium to heavy fabric weights. JMD) Standard
**S2600A-403 NEEDLE PLATE E18 111859301 E18 1 FEED DOG 111860101 1 PRESSER FOOT ASSY 153037201 (for light to medium fabric weights.JMD) Optional
- US Warranty 90 Days labor on defects in materials and workmanship.
- Non-US Warranty: 30 days parts and labor
Click HERE for Instruction Manual to be read before using Brother S6200A Single Needle Straight Lock Stitcher with Thread Trimmer
The S-6200A single needle lock stitch Underbed thread trimming machine with brothers New Generation Built-in Motor Drive.
The S-6200A has high energy saving and exceptional responsiveness with an original motor and control box developed by brother. High quality sewing has been realized with the performance of the S-6200A, which contributes to improving your productivity.
Max. speed: 5000spm
Max. stitch length: 4.2mm
Foot lifter height 6mm (manual) : 13mm (knee lifter)
Built-in bobbin winder
Fully automatic lubrication
Bed size: 476x178mm
Needle: DB X 5 / 135x5. extras come in sizes 16, 18, 20 , 22 for larger hole 405 standard needle plate
Please review our Freight LTL Shipping Policies Ships Ground Freight only.
High energy saving with an original motor developed by Brother
The high energy saving has been realized with the original motor developed by Brother. The power consumption of S-6200A is 41% less than that with AC-servo motor and 23% less than that of the SL-2110. And, the 13 % less than that of the JUKI DDL-8700.
It is impossible to install the standard puller. For particular process, we recommend S-7200C or SL-1110. And also if you would like to install the presser foot lifting, please use the under-table type.
What is the difference of lubrication with DDL-8700?
The JUKI’s DDL-8700 is the pumping forced lubrication type. It’s not the clean sewing because it supplies and recoveries much oil by pressurization.
Is the lubrication system the same as the S-7200C’s minimum
It’s not the same. S-6200A’s minimum lubrication system is the same as SL-2110’s. While S-7200C uses oil tank, S-6200A uses oil pan.
Are the panels the same as S-7200C’s panel?
The panel itself is the same but, mounting plates are different. They are not interchangeable. Also their names are also changed to G1A and G5A for S-6200A.
Is the thread wiper interchangeable with that of SL-2110?
The length of harnesses is different so parts codes are not the same.
Does S-6200A have the functions of condensed stitching and floating foot sewing which with S-7200C?
Unfortunately, S-6200A doesn’t have those functions. When sewing heavy materials, use the vibration function of S-6200A(Brother’s patent).
Is there the 380V?
You can equip the same transformer box as S-7200C’s.