Create exquisite embroidery designs on baseball-style cap crowns with the universal cap hoopster!

Easily attaches to your embroidery hoop and firmly clamps the visor into place to embroider your design. Your hoop must be larger than 5-1/4" x 6-1/4" with thickness of hoop 1/4" or less.

The Cap Hoopster comes with a template grid to assist you with proper placement of embroidery designs.

NOTE: Does not work with Simplicity SE3 Embroidery machine or the Baby Lock Ellegante machine.
It also will not work with 4x4 embroidery hoops.

  • Cap Hoopster allows you to embroider on a typical baseball style cap
  • Clamps to embroidery hoops larger than 5.25" x 4.5"
  • Cap bill is held down outside your regular hoop
  • Measures: 6-1/4" W x 8-3/4" L
  • Requires sticky stabilizer such as those at
    Stabilizers
Specifications
Babylock Sewing Machine Models:
EM1, EM2, ESE, ESI

Bernina Sewing Machine Models:
180, 185, 190, 500, 600

Brother Sewing Machine Models:
LB6800PRW, PC7000, PC7500, PC8200, PC8500, PE100, PE150, PE200, PE8200, PE8500, ULT2001, ULT2002, ULT2003

Elna Sewing Machine Models:
8006, 9006

Husqvarna Viking Sewing Machine Models:
#1, #1+, Designer I, Designer II, Designer SE, Designer I USB, Designer I ESS, Quilt Designer II, Designer II, Quilt Designer, Designer Diamond, Designer Topaz 30, 20, Designer SE, Sapphire 875Q, Sapphire 870, Sapphire 855, Sapphire 850, Sapphire 835, Sapphire 830

Janome (Newhome) Sewing Machine Models:
10000, 5000, 9000, MC10000, MC5000, MC9000

Pfaff Sewing Machine Models:
7500, 7570

Singer Sewing Machine Models:
XL1000, XL5000
Included Accessories
Cap Hoopster
Template for alignment
Attach the Hoopster to the outer edge of your machine’s hoop and secure the visor in the clamp. The hat’s crown is held in place with self-adhesive stabilizer affixed to the bottom of the Hoopster. The fabric next to the bill needs to be straight down, not at an angle or slope to avoid your needle getting caught.

Lou, Rio Grande NJ
The cap hoopster is easy to use. I have a Viking Designer 1. The problem I have is that the end of the hoop (where the knobs are) has a space between the throat and the hoop of approximately 1.5mm. This space will allow you to embroider a design of 3.5mm in height. The width is fine and has plenty of room for wide designs. This size limitation creates serious problems with any design more than 3.5mm in height.

Linda, Florida
There was an issue of availability but Allbrands went the extra mile to get the item to me with what they called a "drop shipment"?. I really appreciate the effort and I will continue to use Allbrands when I need supplies.

Jo, Wisconsin
I still am not able to attach the cap hoopster to my embroidery hoop and have it stay in place. But it did get here in good time.

Linda, Florida
I got the order and as usual Allbrands went way out of their way to make a customer happy.

Valarie, Illinois
THANK YOU!

Janet, Georgia
Always fast shipping!

Mary, Texas
I'm very happy with your service especially with your quick response to my e-mails when I was having problems. I will be placing future orders.

Sharon, Illinois
Hoopster does not work very well with my Brother PC6500....a little disappointed.

Beth, Pennsylvania
have been dealing with your company for a while and have always found it a pleasure. Staff, when I have had to call on an issue have in the past been very helpful. Thank You

Betty, Virginia
You guys are great! Anytime I need embroidery supplies or accessories, you have it at the best prices!