Turn your embroideries into appliqués or patches with this unique, pressure sensitive, fusible web. It may also be used to create traditional appliqués for quilt squares, children’s garments, tote bags, etc. Once heat is applied, Appli-kay Wonder creates a strong, durable bond with the fabric or garment it is fused to. Pressure sensitive side makes re-positioning multiple pieces a snap and keeps them from moving when pressing into place! Machine washable and dry cleanable Won’t gum up machine needles
To turn an embroidery design into a patch or appliqué:
Once the design is complete and trimmed to the desired size, trace the outline of the design on to the paper protective sheet. *Remember that you need to trace or draw the “reverse” of the image.
Following the lines you’ve drawn, cut the shape from the Appli-kay Wonder.
Place the soft/shiny side (exposed fusible) of the Appli-kay Wonderto the backside of the embroidery and then press using a medium temperature on your iron and no steam.
Hold the iron in place for at least 3 seconds.
Once it has cooled, peel away the contact paper from the embroidery design which exposes the sticky side.
Position the embroidery on the garment and then press into place. Finish by stitching around the embroidery with a satin or straight stitch.
Traditional Appliqué using Floriani Appli-kay Wonder:
Trace the design to be appliquéd onto the protective paper sheet of the Appli-kay Wonder. *Remember that you need to trace or draw the “reverse” of the image. Tip! Use a light box or trace at a window for accuracy!
Trim around the image leaving at least ¼” inch of the Appli-kay Wonder outside the traced lines.
Fuse the Appli-kay Wonder to the wrong side of decorative fabric using a medium/high temperature on your iron (No Steam). The fusible side of Appli-kay Wonder is the soft/shiny side. Hold the iron in place for at least 3 seconds and then flip the piece over and press again on the fabric side.
After it has cooled, cut out the appliqué design using the trace lines.
Peel back the protective sheet to expose the sticky surface.
Position the appliqué piece on the garment and press in to place using a medium/high iron temperature. Hold the iron to the appliqué for at least 3 seconds. Press on the appliqué side and the fabric side for maximum bonding. Finish by stitching around the appliqué with a satin or decorative stitch.
Remember that your traced image will be reversed once it is traced onto the paper side of Applikay Wonder. Make adjustments to the original image to prevent this.
NOTE: All irons heat differently. The iron temperature given above is a starting point. If you find that
you are not getting a good fuse, slowly increase your irons temperature until you achieve a good bond.
- US Warranty 30 days replacement if defective.
- Non-US Warranty: 30 days parts and labor