It will hold most large machines due to its larger sewing machine opening that is 23-3/4″ wide x 12-3/8″ deep to fit sewing machines that are no larger than 23-1/2” wide x 12-1/4” deep x 13-7/8” tall and weighs up to 50#’s.
Open: 72” W x 60-1/2” D X 29-1/2” H
Closed: 43-1/4” W x 23” D X 30” H
The 3-Position Airlift allows you to move your machine into Freearm, Flatbed, and Storage positions with a simple push down.
Your serger sits to the right of the sewing machine on a platform supported by the small door. Store your serger inside the cabinet on top of the drawer and close the doors to secure both machine and serger inside.
Plenty of storage throughout the cabinet with:
- 12 magnetic holders
- A row of 6 magnets for holding scissors, seam rippers, etc.
- A large bin on the door
- Plus a drawer and cubby provide storage for all sorts of sewing accessories.
- A Cork Board on the small door allows you to hang fabric, pins or inspirational ideas.
A quilt leaf on the back is repositionable so you can move the leaf where you need the most support for larger projects.
Our Serger Cabinet is constructed with a durable composite and wood grain melamine finish either white or teak to match any decor and last a lifetime with a 5 year warranty.
The cabinet ships in 4 boxes by Fed Ex or UPS. Sorry cannot be shipped to PO Boxes.
Easy, cabinet assembly using a standard screwdriver, adjustable wrench and hammer/mallet.
Assembly instructions are included.
Dimensions Open: 72" wide x 60-1/2" deep x 29-1/2" tall (with quilt leaf extended)
Dimensions Closed: 43-1/4" wide x 23" deep x 30" tall
Large machine opening, allows almost any sewing machine:
12-3/8" deep (front to back)
Airlift Platform Weight Limit: 50 #s
Custom Machine Insert Available
Machines that don't fit into the Serger Cabinet
- Series 7- 780, 750 QE, 710
The machines will fit the opening and platform of the cabinet but the height of the machine does not allow the top right leaf to close completely when the machine is in storage position.
- Dream VX8500D
Janome Horizon Memory Craft 15,000 and Elna eXpressive 920
The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.