Tacsew TLU563 (Juki) Walking Foot Needle Feed Industrial Upholstery Sewing Machine, M Bobbins, 9-13mm Foot Lift, 7mmSL, Power Stand, FREE 100 Needles

• The TLU-563N provides further enhanced durability, and comes with a walking foot mechanism with improved feed
  efficiency that is 20% higher than the conventional one. In addition, the walking foot is provided with a center rest, thereby achieving a higher degree of accuracy, especially in the piping process.
  
  
• The machine is best-suited for the sewing of medium- to extra heavy- weight materials such as tents, awnings, seats, sofas, leather coats, gloves, auto seats ceilings, car interior articles, etc.

• US Warranty: 30 Days labor on defects in materials and workmanship.
• Non-US Warranty: 30 days parts and labor


• See specifications
• See suggested items
  

• Positive feed mechanism
  As the walking foot and needle feed motions are transmitted to the feed dog motion, three feed motions are unison perfectly. When several piles of cloth are sewn together, the upper and lower sewing cloth do not slip and therefore no puckering are formed. Walking foot stroke can be easily adjusted by loosening a butterfly screw on the back side of the machine.
  
  
• The improved feed of the walking foot has 20% greater efficiency than that of conventional machines. The feed mechanism and other mechanisms have been improved. As a result, the durability has been increased and the feed efficiency of the walking foot is 20% greater than that of the conventional model. In addition, the walking foot is now provided with a center rest, which upgrades the accuracy in the piping process in particular.
  
  
• Maximum stitch length 7 mm(9/32")
  The TLU-563 can make a maximum stitch length of up to 7mm(9/32") for heavy duty work and the stitch length can be readily regulated by pressing a push button on the machine bed and turning the hand wheel. The stitch length, once set, never changes during the sewing operation.
  
  
• Smooth and quiet running
  Ball bearings are used for rear bushings of main shaft and hook shaft and a timing belt is used to connect these two shafts. This minimizes the running sound and vibration of the machine during the sewing operation.
  
  
• Sturdy durability
  As durability is essential for sewing heavy weight materials, these machines are equipped with ball bearings and all shaft components are constructed of heat-treated special steel to ensure sound durability.
  
  
• Large bobbin to assure high efficiency of reverse sewing
  For straight lock stitching, the TLU-563 is equipped with not only a reverse sewing mechanism, but also with a large bobbin. The lubrication to the sewing hook components is automatic and adjustable to ensure high sewing efficiency. Also, the sewing hook components of TLU-563 are thoroughly lubricated to prevent scattering of dust from throat plate and its parts to create ideal sewing conditions.
  
  
• Large bobbin improves ease of operation. The TLU-563N model incorporates a vertical-axis double-capacity hook which reduces frequency of bobbin replacement. As a result, easier operation is ensured.
  
  Technical Specifications
  
• Sewing speed: Up to 2,500 s.p.m
  
• Sewing hook: Self-lubricating, vertical axis, full rotary, double-capacity hook
  
• Stitch length: Max.7mm(9/32")
  
• Stitch regulator: Eccentric feed adjuster (link adjusting system for upper feed)
  
• Needle bar stroke: 33.36mm(1-5/64")
  
• Presser foot lift: By presser bar lifting lever: 9 mm By knee-lifter: Max. 13mm
  
• Presser bar lift: By knee lifter 10 mm(25/64") By hand lifter 4mm(11/64")
  
• Feed mechanism: Unison feed: walking foot, feed dog and needle feed
  
• Hook shaft driving system: Timing belt with safety device
  
• Weight of head: 29 kgs(63.8 Lbs.)
  
• Thread take-up: Slide type stroke 117 mm(4-39/64")
  
• Needle: D1 x 17 (135 x 17) #18 to #23
  
• Lubrication: Hand oiling system
  
• Belt: 9.5mm(3/8") width M type
  
• Motor: 1/2 HP clutch motor
  
  Made in Taiwan. Copy of Juki LU 563 from Japan - See Demo