 |
April 16, 2024 |
Industrial Fabric Cutters
Superior EC-360-03 Nickel Cadmium Battery 9.6Volt DC for Kingbow MB-60 Cutters
 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
for EC360 and Kingbow MB-60 Round Knife Cutting Machines, Cordless Electric Shear 9.6V DC. 2.5Lb, Heavy Duty Materials including 1/2" Carpeting, Rugs, Leather, Canvas, Vinyl, 10 Layers Textile Fabrics
Rechargeable Battery for MB-60 and EC-360 electric scissors.
Rechargeable Battery for MB-60 and EC-360 electric scissors.
Non-US Warranty: 30 days parts and labor.
WBT-1 Best Buy Cord Cordless Electric Scissors Shears Trimmers Cutter Cuts Paper, Kevlar, Cardboard, Leather, Vinyl, Canvas, Plastic, Rubber, Carpet*
 39251: WBT1 Cord Cordless Electric Scissors Shears Trimmers Fabric Cutter |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Looking for an easy to use handheld cutter? Then the WBT-1 is for you! WBT1 with 2 Blades, AC Adapter, DC Battery, Charger, it Cuts Silk, Vinyl, Kevlar
*WBT-1 Electric Scissors are twice as large, twice the power, and less expensive than the EC1 Easy Cutter HandHeld Cord Cordless Electric Scissors EC-1 Superior, Shoe Blades, Battery Charger, 110V 5vAdapter, Fabrics to Kevlar (MC8 Elize EC1)
"I can always expect a quality product and terrific service. Pleasure doing business with AllBrands.com" Doreen F, NJ
Product Description
WBT Electric Scissors is widely used in households and various factories that need cutting 0-10MM thickness (depending on materials) .
Portable Electric Scissors Features:
1. It is convenient and portable, chargeable and electric plugged.
2. Low consumption and high energy efficiency (60 Minutes of operating time when fully charged)
3. By adopting tungsten steel blade, it is in durable service.
4. With low noise, favorable heat emission, anti-fatigue, and strong continuous work capacity.
*Cutting Range(depend on materials):
*WBT-1 Electric Scissors are twice as large, twice the power, and less expensive than the EC1 Easy Cutter HandHeld Cord Cordless Electric Scissors EC-1 Superior, Shoe Blades, Battery Charger, 110V 5vAdapter, Fabrics to Kevlar (MC8 Elize EC1)
"I can always expect a quality product and terrific service. Pleasure doing business with AllBrands.com" Doreen F, NJ
Product Description
WBT Electric Scissors is widely used in households and various factories that need cutting 0-10MM thickness (depending on materials) .
Portable Electric Scissors Features:
1. It is convenient and portable, chargeable and electric plugged.
2. Low consumption and high energy efficiency (60 Minutes of operating time when fully charged)
3. By adopting tungsten steel blade, it is in durable service.
4. With low noise, favorable heat emission, anti-fatigue, and strong continuous work capacity.
*Cutting Range(depend on materials):
- 10mm: underwear ,cloth,textile ,knitwear,felt,blanket, curtain
- 7mm: five layer cardboard, 17 sheets of A4 paper, one sheet is 80g
- 5mm: leather, carpet, plastic, fiberglas, rubber
Included Accessories:
Fuselage
Cutter head A (sharp/short working life/cutting quickly for hard and thick)
Cutter head B (blunt/long working life/cutting slowly for soft and thin )
Battery
Plug battery
AC Power adapter
Charging stand
WBT-1 Portable Electric Scissors:
With Sharp/Blunt Cutting Head
Can cut various kind products of cotton and felt products within a thickness of 15mm
Can cut various kind products of cloth, textile and fabric within a thickness of 8mm
Can cut various kind products leather, rubber and Kevlar within a thickness of 5mm
Specifications
-
Rated voltage of charger: 100-240V
-
Output power: 35W
-
Cutting capacity: 0-10mm (depend on material)
-
Blade material: Tungsten steel
-
Charging Time: 2 hours
-
Operating Time: 60 minutes (Fully Charged)
-
Place of Origin: Fujian China
-
Brand Name: WBT
-
Machine body weight:0.376KG
-
Application:Industry and Household
-
Operate: Two using types,with cord (can continuously work) and recharge battery
Non-US Warranty: 30 days parts and labor.
Specifications
Model WBT-1 is a Heavy Duty Battery powered cutter. Comes with battery and charger.Features:
-Cuts Aramid Fibers, Kevlar® and other tough fabrics.
-Superior ergonomic design. Requires much less effort to use than cutting manually.
-Light weight and maneuverable.
-Rechargeable long lasting battery. No cord to worry about.
-Carbide insert blades for longer wear.
-Can be operated with cord and battery adapter (supplied) for unlimited cutting time.
-Short rapid strokes for intricate work.
-Not recommended for material over 1/8 inch thick due to short stroke.
-All parts included in the kit are also available as spare parts.
-
Product Dimensions: 230x50mm (L x W x D)
-
Product Weight: 278g
- Weight/dimension is for the main item of this boxed product
-
Place of Origin: Fujian China (Mainland)
-
Application: Shearing
-
Brand Name: WBT-1
-
Common Type: Tailor Scissors
-
Material: Tungsten
-
Cutting capacity: 0-10mm
-
Cutting Range:
-Cotton and Felt = Up to 15mm
-Textile and Fabric = Up to 8mm
-Rubber and Kevlar Up to 5mm
-
Color: Grey
-
Cutter Heads: 2 ( A = Sharp, B = Blunt)
-
Charger: 100-240V 50/60Hz 1.0A 35W
WBT-1 Portable Electric Scissors. These versatile electric scissors run on the mains or battery and are great at cutting all kinds of materials including carbon fibre cloth.
WBT-1 Portable electric scissors for cutting fabric scarf
WBT-1 Portable Electric Scissors
Diamond Organ YJ50 2" Rotary Hex Blade Cutter, Hand Held Cloth Cutting Machine, 110V, 60W
 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
Convenient Hand-Held Cutting Machine
110V 60 Watt Heavy Duty Motor
Standard 2" Hex Blade
110V 60 Watt Heavy Duty Motor
Standard 2" Hex Blade
Non-US Warranty: 30 days parts and labor.
Superior EC-360CC 2.25" 60mm Blade Cordless HD Round Knife Rotary Shear Cutter 110V EC360 (Kingbow EC60 EC-60) +Hard Carry Case Red, No Extra Battery)
 59148: Superior EC-360CC 2.25" Blade Cordless HD Rotary Shear Cutter +Case EC360 (Kingbow EC-60 EC60) |
Our Price: $369.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Specifications
Powerful cutting motor with ergonomic balance makes it the most popular cutting tool used by all types of professionals.Replaceable octagonal blades can cut textile fabrics with ease.
60mm 10 Sided rotary blade and carbide stationary blade are a self-sharpening combination.
Cuts up to 10 layers of textile fabrics and up to 1/2" (13 mm) of carpeting
Powerful 9.6 volt Heavy Duty motor, powered by a rechargeable NiCad Battery Pack.
Industrial, re-usable NICAD battery recharges in less than 1 hour.
One hour recharges can cut approximately 800 feet of cloth or 300 feet or carpet on a single charge. For continuous operation, keep a second battery in the charger.
Same as Bosch 1925 cordless cutting tool - and costs a lot less.
Battery pack can remain indefinitely in the battery charger and the full charge will be maintained automatically by the trickle charging circuit built into the charger
Light indicates charging is in progress, when light goes out, the rapid charging is complete
Cutting unit weighs approx. 1.5 lbs, battery weighs 1 lb, total weigh approx. 2.6 lbs
Length: 9.5" without battery, 12.5" with battery, 2.25" wide, 3" tall, 6.5" girth
Superior EC-360CCB 2.25inch 60mm Blade Cordless HD Round Knife Rotary Shear Cutter 110V EC360 (Kingbow EC60 EC-60) +Hard Carry Case Red, Extra Battery
59148: Superior EC-360CC 2.25" Blade Cordless HD Rotary Shear Cutter +Case EC360 (Kingbow EC-60 EC60) |
Our Price: $429.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Specifications
Powerful cutting motor with ergonomic balance makes it the most popular cutting tool used by all types of professionals.Replaceable octagonal blades can cut textile fabrics with ease.
60mm 10 Sided rotary blade and carbide stationary blade are a self-sharpening combination.
Cuts up to 10 layers of textile fabrics and up to 1/2" (13 mm) of carpeting
Powerful 9.6 volt Heavy Duty motor, powered by a rechargeable NiCad Battery Pack.
Industrial, re-usable NICAD battery recharges in less than 1 hour.
One hour recharges can cut approximately 800 feet of cloth or 300 feet or carpet on a single charge. For continuous operation, keep a second battery in the charger.
Same as Bosch 1925 cordless cutting tool - and costs a lot less.
Battery pack can remain indefinitely in the battery charger and the full charge will be maintained automatically by the trickle charging circuit built into the charger
Light indicates charging is in progress, when light goes out, the rapid charging is complete
Cutting unit weighs approx. 1.5 lbs, battery weighs 1 lb, total weigh approx. 2.6 lbs
Length: 9.5" without battery, 12.5" with battery, 2.25" wide, 3" tall, 6.5" girth
Norton 15052UNV 4-1/4" India Grit Fine Triangle File for Light Scissor Sharpening Not Too Abrasive Made in USA (Replace Gingher Sharpening Stone NLA)
 83268: Norton 15052UNV 4-1/4" India Grit Fine Triangle File for Light Scissor Sharpening |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
POLISHING STONE TRIANGULAR 4 X 1/4 INCH MADE IN USA, Size 320 Micron Grade Fine Grit Grade India Sharpening Stone
Non-US Warranty: 30 days parts and labor.
Handi Quilter HG00413 Curved 5" Straight Cutting Blades, Batting Scissors Shears Bent Trimmers
 56845: Handi Quilter HG00413 Curved 5" Batting Scissors Shears Bent Trimmers |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
These scissors are specifically designed to cut batting. With a 5 inch straight cutting blade, and an ergonomically designed handle, cutting will be easy. Precision made for fine quality steel.
Handi Quilter's Handi Batting Scissors were created by quilters who wanted a tool made specifically to cut batting. After extensive research, Handi Batting Scissors were born to make cutting batting easier and more convenient than ever before. The handle is designed for easy cutting.
Handi Batting Scissors are precision-made from fine quality steel, hot forged, and individually inspected to provide you the highest quality cutting tool available. The straight cutting blade is 5 inches long.
Handi Quilter's Handi Batting Scissors were created by quilters who wanted a tool made specifically to cut batting. After extensive research, Handi Batting Scissors were born to make cutting batting easier and more convenient than ever before. The handle is designed for easy cutting.
Handi Batting Scissors are precision-made from fine quality steel, hot forged, and individually inspected to provide you the highest quality cutting tool available. The straight cutting blade is 5 inches long.
Non-US Warranty: 30 days parts and labor.
Jiasew Lejiang YJ-125A Stand Up 5" Largest Rotary Round Knife Blade, Shear Cutter Cloth Cutting Machine, 110V, 350W, 40mm 1.6" Trimming Capacity
 56476: Jiasew Lejiang YJ-125A Stand Up 5" Rotary Knife Blade Cutter Cutting Machine |
Our Price: $249.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 110 Volts.
- 350W
- Trimming Capacity 40mm
- Oiler Bottle, Lubricant
- Parts and Accessories
- 5" Round Knife Blade
- Built In Sharpener
- Blade Guards
- Instruction Manual
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
US Mesh Steel Safety 3 Finger Mitten, or 5 Finger Glove, XXS, XS, Small, Medium or Large, Made in the USA for Scissors and Cutting Tools.
 37861: US Mesh Steel Safety 3 Finger Mitten or 5 Finger Glove, Small Medium Large |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For cutting safety between knife and flesh
Available sizes:
Available sizes:
-
Small: 6 in
-
Medium: 7.5 in
-
Large: 8 in
Application:
- Cut Protection
- Direct food contact
- Food processing
- Food service
- Grocery / retail meat & poultry
Attributes
-
Performance Application: Cut Resistant Glove
- ANSI Cut Rating: Level 5
Non-US Warranty: 30 days parts and labor.
Clauss 19592 8in Bent Trimmer Scissors Shears, Micro Serrated Blades for Cutting Kevlar, Upholstery, Canvas, Vinyl, Denim, Fabrics
 Clauss 19592 8in Bent Trimmer Scissors Shears, Micro Serrated Blades for Cutting Kevlar, Upholstery, Canvas, Vinyl, Denim, Fabrics |
Our Price: $36.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Clauss 19592 Shears are specifically designed to cut Kevlar® materials. Also excellent for cutting plastic, canvas, upholstery and more. Micro-serrated blades for true grip & cut performance. Bent. High carbon alloy steel. Molybdenum and Vanadium blades for industrial strength. Grey handles.
- Specially Designed To Cut Kevlar Materials
- Also Excellent For Cutting Plastic, Canvas, Upholstery & More
- Micro-Serrated Blades For True Grip N' Cut Performance
- High Carbon Alloy Steel
- Molybdenum & Vanadium Blades For Industrial Strength
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Length: 10.38 inchesWidth: 3.63 inches
Height: 0.50 inches
Kai 7205 Japan 8" Best Dressmaker Scissors Shears Bent Trimmers, Heavy Duty Professional, Stainless Steel
 13289: Kai 7205 Japan 8" Best Dressmaker Scissors Shears Bent Trimmers |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
KAI 7000 series High-Carbon stainless steel shears—depend on an extra-long edge life and superior cutting efficiency.
The KAI 7205 8" Shear is made from high carbon, hardened stainless steel. The addition of carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge. Swedish blogger and author, Johanna Lu*, says the best way to describe KAI Scissors is “like cutting through butter”.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears are not a reinvention of the standard cutting implements—they are the next class of professional, must-have scissors. Designed to professional standards, these tailoring-style shears are perfect for clothing construction, perfect pattern cutting, and much more. Smooth cutting action, super sharp blades, and a comfortable fit make these the sharpest, most ergonomic fabric scissors available.
The entire shear is cut via laser out of high-carbon, maloybenum and vanamium stainless steel. What does this mean to you? This process, and these materials, ensure long-lasting sharp edges and a perfect balance. Equipped with a patented double-nut interlock blade fastener, the blades are designed to prevent the common loosening screw, maintain tightness of the tool, and adjust the blade tension. Furthermore, the shears present an elegant matte finish, and come with a tasteful elastomer cushioned handle, molded to fit your fingers for a perfect grip—just like the majority of their products.
The winner of the 2005 IF Design Aware, the shears are designed for all types of fabrics, such as acrylics, sheers, denim, silks, canvas, dacron and composite sail cloth, leather, fleece, culinary use, drapery fabrics, and upholstery.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears.
A flawless cut. An elegant fit. A perfected tool.
Note: This product, specifically, is the 7205 model. The distinction is that these are the 8"/205mm edition of the 7000 line, designed for ambidextrous (left and right-handed) use.
Kai 7000 Series—Product Brochure (.PDF)
KAI SCISSORS FOR SEWING – A REVIEW by Johanna Lu*
The KAI 7205 8" Shear is made from high carbon, hardened stainless steel. The addition of carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge. Swedish blogger and author, Johanna Lu*, says the best way to describe KAI Scissors is “like cutting through butter”.
Introducing the KAI 7000 Series High-Carbon Stainless Steel Shears
Progress to 0:37 for a thorough demonstration on cutting durable fabrics.The KAI 7000 Series™ High-Carbon, Stainless Steel Shears are not a reinvention of the standard cutting implements—they are the next class of professional, must-have scissors. Designed to professional standards, these tailoring-style shears are perfect for clothing construction, perfect pattern cutting, and much more. Smooth cutting action, super sharp blades, and a comfortable fit make these the sharpest, most ergonomic fabric scissors available.
The entire shear is cut via laser out of high-carbon, maloybenum and vanamium stainless steel. What does this mean to you? This process, and these materials, ensure long-lasting sharp edges and a perfect balance. Equipped with a patented double-nut interlock blade fastener, the blades are designed to prevent the common loosening screw, maintain tightness of the tool, and adjust the blade tension. Furthermore, the shears present an elegant matte finish, and come with a tasteful elastomer cushioned handle, molded to fit your fingers for a perfect grip—just like the majority of their products.
The winner of the 2005 IF Design Aware, the shears are designed for all types of fabrics, such as acrylics, sheers, denim, silks, canvas, dacron and composite sail cloth, leather, fleece, culinary use, drapery fabrics, and upholstery.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears.
A flawless cut. An elegant fit. A perfected tool.
Note: This product, specifically, is the 7205 model. The distinction is that these are the 8"/205mm edition of the 7000 line, designed for ambidextrous (left and right-handed) use.
- Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
- Full-length "blade-to-grip" design for optimal cutting balance.
- Novel duplex interlock screw for lasting blade tension.
- Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.
Kai 7000 Series—Product Brochure (.PDF)
KAI SCISSORS FOR SEWING – A REVIEW by Johanna Lu*
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7205 is the 8-inch professional scissor that is ideal for thicker, more difficult fabrics. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last.Length: 8" (205mm)
Edge: Smooth
Handedness: Right
Handle: Bent
Mundial 490-12X 422-W 12" Heavy Duty All Metal Scissors, Shears, Bent Trimmers, with 5-7/8" Cutting Length, for Home or Commercial Use, Nickel plated
 31118: Mundial 490-12X 422-W 12" Heavy Duty Scissors, Shears, Bent Trimmers |
Our Price: $56.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
- Overall Length - 12 inches
- Cut Length - 5 7/8 inches
- Professional knife-edge, dressmaker shears for extensive cutting tasks.
- Ideal for cutting fine synthetic fabric/material.
- Hot drop-forged
- Adjustable bolt/nut pivot assembly.
- Nickel plated with black handle.
- Right Handed Scissors
Non-US Warranty: 30 days parts and labor.
Kai Japan 5250 10in Dressmaker Scissors Shears Bent Trimmers 4-3/4" Cutting Length
 30935: Kai Japan 5250 10in Dressmaker Scissors Shears Bent Trimmers 4-3/4" Cut |
Our Price: $34.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The shear handles are ergonomically designed to place the hand in correct alignment for ease of cutting and are made of Santoprene®, a soft thermal rubber, that is chemically bonded to the blades to prevent contamination. The handles are also slightly larger than the 5210 for larger and gloved hands.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- For difficult to cut materials
- Food safe for cutting up poultry, meats, and vegetables(FDA approved dyes in handles)
- All fabrics, sewing, and trimming operations
- Household use (shears are dishwasher safe)
- Meets most hobby and craft needs
- Gardening and floral arrangements
- Typically last 2-3 times longer than other brands of Shears
KM Impress KS-AU-V Straight Knife Cloth Cutter Cutting Machine 6-13" Knife Blades Cut 4-11" AutoOil Built-InSharpenerBelts 4Motors, 500W 110/220V 32Lb
 |
Our Price: $2,045.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
KS-AU, Straight Knife Cloth Cutting Machine with Automatic Abrasive Belts Sharpener, is the most popular cutting machine in the garment industry. It's suitable for cutting all kinds of fabrics from thin materials to thick materials.
MOTOR
A custom designed motor assures a smooth cutting operation with excellent cutting power and low motor temperature.
AUTOMATIC OIL LUBRICATION DEVICE
Oil can be supplied automatically from an oil reservoir to the guide metals and cross head. An internal oil guard keeps other interior parts clean.
AUTOMATIC SHARPENING DEVICE
There is an abrasive belt sharpening device. Just press down the sharpening lever and the blade can be sharpened automatically to maintain the most suitable edge for cutting.
STANDARD
Thinner and flat type Standard lowers the resistance of cutting material and a bigger blade stroke makes sure your cuts stay smooth.
BASE PLATE
The base plate is low and the surface is smooth, ensuring material travel without snagging before or after cutting.
OTHER
Equipped with fan-guard and starting switch cover for safety.
Please Note the blade length does not equal the amount of stacked material that can be cut. The cut depth will depend on the thickness, texture and density of the material you are using. If you are unsure if this cutter will suit your application please contact us to let us know the material that you are using, and we will be happy to offer our best recommendation
MOTOR
A custom designed motor assures a smooth cutting operation with excellent cutting power and low motor temperature.
AUTOMATIC OIL LUBRICATION DEVICE
Oil can be supplied automatically from an oil reservoir to the guide metals and cross head. An internal oil guard keeps other interior parts clean.
AUTOMATIC SHARPENING DEVICE
There is an abrasive belt sharpening device. Just press down the sharpening lever and the blade can be sharpened automatically to maintain the most suitable edge for cutting.
STANDARD
Thinner and flat type Standard lowers the resistance of cutting material and a bigger blade stroke makes sure your cuts stay smooth.
BASE PLATE
The base plate is low and the surface is smooth, ensuring material travel without snagging before or after cutting.
OTHER
Equipped with fan-guard and starting switch cover for safety.
Please Note the blade length does not equal the amount of stacked material that can be cut. The cut depth will depend on the thickness, texture and density of the material you are using. If you are unsure if this cutter will suit your application please contact us to let us know the material that you are using, and we will be happy to offer our best recommendation
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Blade Length/Cutting Capacity: 6"/4.3", 7"/5.3", 8"/6.3", 10"/8.25", 13"/11.4"
- Weight: 14.5kg / 32lbs
- Voltage: 120V / 220V
- Output: 500W
Consew 501P HD Heavy Duty Cordless Handheld 2" Rotary Blade Shear Cutter, Fabrics to Rugs Cutting Machine
 44545: Consew 501P HD Cordless Handheld 2" Rotary Shear Cutter Rug Cutting Machine |
Our Price: $339.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This cordless heavy duty electric shear works like a pair of hand shears only faster, cleaner and easier. Cuts material of up to ½" (12 mm) in thickness, including knitted fabrics, leather, carpet, fiberglass, etc
- Replaceable 10 sided blade can cut carpeting, PVC, linoleum, foam, rubber, leather, card board, cork, and textile fabrics with ease.
- Cuts up to 10 layers of textile fabrics, 9/16" (14.5 mm) of foam fabrics and up to 1/2" (13 mm) of carpeting
- Battery Operated, Industrial, re-usable NICAD battery recharges in less than 1 hour.
- Battery pack can remain indefinitely in the battery charger and the full charge will be maintained automatically by the trickle charging circuit built into the charger.
- 9.6V 110V Battery charger W/ Heavy Duty NiCad battery Pack and temp. controlled Quick-Charge Charger
- Light indicates charging is in progress, when light goes out, the rapid charging is complete.
Features:
- A 2-15/16" (60 mm) 10-sided round knife and carbide tipped stationary counter knife. Comes with a sharpening stone mounted in the machine.
- At the heart of this cutter is it's powerful 9.6 volt brushless motor fed by a heavy-duty NiCad Battery Pack. It recharges in 1 hour and can cut approximately 325 yards (300 meters) of cloth or 350 feet (120 meters) of material on a single charge. For continuous operation, keep a second (optional)battery in the charger.
- The newly designed knife guard meets international safety regulations.
- It comes equipped with simple touch sharpener to ensure sharpness at all times.
- Stops automatically if it slips out of your hand.
- The shear with battery attached is only 2.5 lbs (1.136 kg.) 11-1/2" (29.5 cm) long.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
Weight: approx. 1.5 lbs
-
Battery Weight: 1 lb
-
Total Weight: approx. 2.5 lbs
-
Length:11.5" (30cm) with battery
- Blade Diameter: 2"
Consew 503K Tuffy 2" 50mm Rotary Blade Cutter, Fabric Shear Cutting Machine
 1516: Consew 503K Tuffy 2" 50mm Rotary Blade Cutter Fabric Shear Cutting Machine |
Our Price: $329.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Optional Replacement or Extra Consew 700 2" 6-Sided Hexagonal Rotary Knife Blade Replacement for Cutting Fabric & Cloth with the Consew 503 Rotary Cutter
Portable Electric Rotary Shear. Tuffy is excellent for narrow curves and sharp corners, and for cutting single and low lays of material. It can be used for slitting and trimming knitted fabrics when base plate is removed.
Tuffy can handle all types of fabric liners such as knit, silk, cotton, hemp, and so on. Use Tuffy to cut interior materials such as carpet and curtains or thin vinyls, leathers, or even car seats.
Portable Electric Rotary Shear. Tuffy is excellent for narrow curves and sharp corners, and for cutting single and low lays of material. It can be used for slitting and trimming knitted fabrics when base plate is removed.
Tuffy can handle all types of fabric liners such as knit, silk, cotton, hemp, and so on. Use Tuffy to cut interior materials such as carpet and curtains or thin vinyls, leathers, or even car seats.
- Suitable for straight and curved cutting on light to heavyweight materials.
- Complete maneuverability when performing "off the table" operations such as trimming knitted fabrics and plastics
- Comes equipped with knife guard, sharpener, hanger hook and 6 1/2-foot line with standard plug.
- Features a worm gear drive for efficient, effortless operation.
- MACHINE TYPE : Lightweight, Portable Rotary Shear.
- BLADE SIZE : 2" (50mm) Hexagonal knife
- CUTTING DEPTH, MAX : 9/32" (7.2mm)
- ELECTRICAL : 50 watt motor AC/DC 115V
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Features:
-A light 1150-gram plastic body for easy handling
-6-sided high-speed steel blade-Removable base plate allows “off the table” operations such as slitting
-Shock protection, double insulated against electrical shock-Continual sharp, clean cuts on all fabric, thick or thin
-Simple push button starting and automatic sharpening
Specifications:
-Blade Type: Hexagonal Knife
-Blade Size: 2” (50mm)
-Cutting Depth: 9/32” (7.2mm) Maximum
-Weight: 19 ounces (540 gr)
-Electrical: 110 volts AC, 50 Watt Motor
-Electrical Connection: 6-1/2 foot line cord with standard plug
Consew DCS-S4 Leather Skiving up to 2" Wide, Machine Power Stand, Knife Shoe/Plate, Sharpener, Waste Removal, Grind Leather, Vinyl, Shoes
 23438: Consew DCS-S4 Leather Skiving up to 2" 50mm Wide, Machine & Power Stand |
Our Price: $1,399.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Fortuna-type knife shoe and plate
- Skiving width up to 2"
- Waste removing device
- Separate clutch for engaging the knife sharpener prolongs the life of the knife and sharpening stone
- Removes the backing off of leather
Applications
Widely used for edge skiving and whole skiving of leather, artificial leather, vinyl and similar materials.
Used in conjunction with such products as shoe uppers, leather bags, belts, watch straps and leather upholstery buttons.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Speed: 1100 rpm (max)
- Working Width: up to 2” (50mm) skive
- Barre grinding wheel and presser feet
- Fully interchangeable with similar equipment
Consew leather skiver
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew DCS-S4 Leather Skiving <2in Wide, Machine Head Only, No Motor/Stand, Knife Shoe & Plate, Sharpener, Waste Removal, Grind Leather, Vinyl, Shoes
|
Our Price: $1,099.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
- Fortuna-type knife shoe and plate
- Skiving width up to 2"
- Waste removing device
- Separate clutch for engaging the knife sharpener prolongs the life of the knife and sharpening stone
- Removes the backing off of leather
Applications
Widely used for edge skiving and whole skiving of leather, artificial leather, vinyl and similar materials.
Used in conjunction with such products as shoe uppers, leather bags, belts, watch straps and leather upholstery buttons.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Speed: 1100 rpm (max)
- Working Width: up to 2” (50mm) skive
- Barre grinding wheel and presser feet
- Fully interchangeable with similar equipment
Consew leather skiver
Consew MB-90 Micro Top Round Knife 3.5" Stand Up Rotary Fabric Cutter
 99235: Consew MB-90 Micro Top Round Knife 3.5" Rotary Fabric Cutter |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
Genuine Micro Top MB-90, MADE IN TAIWAN
3-1/2" Round Knife
11V single phase
1.2Amps
3-1/2" Round Knife
11V single phase
1.2Amps
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Consew 515E-1 Stand Up 3.5" 90mm Round Knife Rotary Fabric Cutter Cutting Machine
 1482: Consew 515E Stand Up 3.5" Round Knife Rotary Fabric Cutter Machine |
Our Price: $359.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The versatile Model 515 combines the fast and accurate operation of a larger machine in one that is lightweight and effortless to operate. This machine is designed to cut all types of patterns and is capable of handling slippery or synthetic materials singly or in multiple plies. Model 515 easily cuts all types of fabrics. Consew has designed this machine with a balanced handle, which allows for one-hand use. Model 515 comes with finger guard and built-in sharpener.
-
Machine Type: Round Knife
-
Blade Size: 3-1/2" (90mm)
-
Cutting Depth, Max: 11/16" (18mm)
-
Weight: 4 Lbs. 10 Oz. (2 Kg)
-
Horsepower: 1/10
- Combines The Fast And Accurate Operation Of A Larger Machine In One That Is Lightweight And Effortless To Operate
- Designed With Balanced Handle Which Allows For One-Hand Use
- Designed To Cut All Types Of Patterns And Is Capable Of Handling Slippery Materials.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Eastman Buzzaird BZ Buzz-1 Pneumatic Motor* Air Powered Standard Rotary Shear Cutter, 2in Diameter Knife Blade, Wet Cloth Cutting Machine Made in USA
 8356: Eastman Buzzaird BZ Buzz-1 Pneumatic* Wet Cloth Shear Cutter 2" Rotary |
Our Price: $999.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
50% more powerful than Eastman Chickadee electric models, Built-in Blade Sharpener Stone, Thumb Switch Activated. This rotary shear has the most torque and blade rpm of all our rotary shears.
In addition, the pneumatic motor is great for heavy-duty cycle environments.
BZ is the Buzzaird air-powered cutter which requires your 60-90 p.s.i. air compressor for operation and will cut small amounts of heavy, dense rubbers and plastics. Applications include trimming belt loops, woven fiberglass, coated materials, even Kevlar. 2-1/32" blade.
The smallest round knife available, the Chickadee replaces handheld shears. It is powered by Eastman's Perma-Field motor and has 40% more power than any other handheld knife its size. The compact size, combined with its streamlined, lightweight construction, helps eliminate operator fatigue. The Chickadee can be equipped with a 2-1/4" round blade for general use or a hexagon blade for sheer or difficult-to-cut cloth. It has a cutting capacity 25% greater than competing models. The Chickadee also features a built-in sharpener and an ergonomically designed grip-actuated on/off switch.
In addition, the pneumatic motor is great for heavy-duty cycle environments.
BZ is the Buzzaird air-powered cutter which requires your 60-90 p.s.i. air compressor for operation and will cut small amounts of heavy, dense rubbers and plastics. Applications include trimming belt loops, woven fiberglass, coated materials, even Kevlar. 2-1/32" blade.
The smallest round knife available, the Chickadee replaces handheld shears. It is powered by Eastman's Perma-Field motor and has 40% more power than any other handheld knife its size. The compact size, combined with its streamlined, lightweight construction, helps eliminate operator fatigue. The Chickadee can be equipped with a 2-1/4" round blade for general use or a hexagon blade for sheer or difficult-to-cut cloth. It has a cutting capacity 25% greater than competing models. The Chickadee also features a built-in sharpener and an ergonomically designed grip-actuated on/off switch.
- More powerful than Chickadee model
- 1/3 horsepower output with air compressor
- Engineered with a 20,000 RPM pneumatic motor
- Eastman’s most powerful rotary shear with the highest torque and greatest RPM
Eastman Buzzaird® Pneumatic Shear Model: BZ
Engineered with a 20,000 RPM pneumatic motor
Eastman's most powerful rotary shear with the highest torque and greatest RPM
Optional Pelican head designed for cutting lofted material
Optional swivel sharpener is equipped with a 30 degree ball tip shear plate for close edge trimming.
The Buzzaird® is designed for a 20,000 RPM pneumatic motor suitable for wet environments. It is an extremely powerful rotary shear suitable for cutting single-ply leather, rubber, plastics, woven glass, coated materials, and much more. Available options include a Pelican head or swivel sharpener. Optional swivel sharpener is equipped with a 30 degree ball tip shear plate for close edge trimming.
- Wet Environment Suitability
- Pneumatic (air-powered) cutting
- Eliminates Operator Fatigue: Lightweight cutting, weighing only 3 lbs. (1.36 kg)
- Efficiency: On-the-spot sharpening with a built-in sharpener
- Safety: Standard equipment includes transparent Lexan Knife Guard.
- 6 ft hose
Eastman Buzzaird
Eastman Buzzaird BZ Buzz-1 Pneumatic* Wet Cloth Shear Cutter 2" Rotary
Extended US Warranty: 6 Months Parts and 90 Days Labor Service on defects in material and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
MODEL BZ – The Buzzaird is designed with a 20,000 RPM pneumatic motor suitable for wet environments. It is an extremely powerful rotary shear suitable for cutting single-ply leather, rubber, plastics, woven glass, coated materials, and much more.Eastman Buzzaird Pneumatic Shear Specifications
Motors
60-90psi
Horsepower
.33hp
Weight
3 lbs. (1.36 kg)
Blades
Standard: Semi-Square Optional: Circular, Octagon
Options
Pressure Foot, Ball Tip, Pelican, 30 Degree Point, Swivel Sharpener, Shear Foot
Blade Size
2.03 in. (5.16cm)
Cutting Capacity
0.38 in. (0.96cm)
Disclaimer
All indicated specifications, dimensions, weights and performance data are approximate and subject to change without notice
60-90 psi. Pneumatic: Standard
Blade Types:
-
Circular: Available
-
Hexagon: N/Available
-
Semi-square: Standard
-
Octagon: Available
-
Weight: 3 lbs. (1.36 kg.)
-
Horsepower .33 hp
-
Blade Size: 2.03 in. (5.16 cm)
-
Cutting Capacity: .38 in. (.96 cm)
Bases
-
Stabilizer Shoe: N/Available
-
Ball Tip: Optional
-
Broad Stabilizer: N/Available
-
Baseplate: N/Available
The Buzzaird® rotary shear is available with different shaped blades to maximize shearing, chopping or slicing of technical fabrics. The air powered motor provides an alternative solution to facilities where electric power is not sustainable.
Click HERE for Genuine Parts for Eastman Buzzaird Rotary Cutter
Disclaimer
All indicated specifications, dimensions, weights and performance data are approximate and subject to change without notice.
The Buzzaird® rotary shear is available with different shaped blades to maximize shearing, chopping or slicing of technical fabrics. The air powered motor provides an alternative solution to facilities where electric power is not sustainable.
- Optional Pelican head designed for cutting lofted material
- Optional swivel sharpener is equipped with a 30 degree ball tip shear plate for close edge trimming.
Motors
60-90psi
Horsepower
.33hp
Weight
3 lbs. (1.36 kg)
Blades
Standard: Semi-Square Optional: Circular, Octagon
Options
Pressure Foot, Ball Tip, Pelican, 30 Degree Point, Swivel Sharpener, Shear Foot
Blade Size
2.03 in. (5.16cm)
Cutting Capacity
0.38 in. (0.96cm)
Eastman Blue Chick B1 Electric 2.25in Handheld Rotary Fabric Cutter 110V, Cuts 1/2in, 120V, 40W, 1250RPM, Built-In Sharpener, Same as Red Chickadee D2
 |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
*Blue Chick B is exactly the same as Eastman Red Chickadee D2 Commercial Grade Lightweight Rotary Knife Fabric Cutter Shears, 2.25" Blade, 40% More Power, Sharpener, 2 Pounds. Discontinued, no longer available after this last one is sold.
- 120 Volt, 40 Watt, 1250 Rpm
- Weighs Only 2 Pounds
- Commercial Cutting Strength
- 2.25" Inch Rotary Knife Blade
- Cuts Up To 1/2" Material
- Electric Rotary Cutter
- Same specs as Eastman Red Chickadee sold to garment factories at a higher price below.
Extended US Warranty: 6 Months Parts and 90 Days Labor Service on defects in material and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Cuts up to 1/2" of material
- Offers 40% more power than other hand-held shears
- Replace scissors!
- Weighs only 2 lbs
- Industrial strength
- Cuts drapery, canvas, felt, Lycra, poly, cotton, leather, Quiltlok, etc.
Click HERE for Instruction Book and Parts List for all Eastman Round Cutters
Click HERE for Parts Manual only just for Eastman Red Chickadee D2H or D2 same as Chick B
You Tube User Video on same Eastman Chickadee D2 Red Electric Rotary Cutter, Showing Features
Eastman Chickadee D2-1 Commercial Red 2.25" Rotary Blade Cutter Fabric Cutting Machine 110V, Cuts Thru 1/2" Materials
 12422: Eastman Chickadee D2-1 Commercial Red 2.25" Rotary Blade Fabric Cutter |
Our Price: $499.95 Prices are subject to change, and only current prices will be honored. Availability: Limited Stock Condition: New In Box |
Features
Save over $100 when you purchase the same Eastman ChickB1 BLUE 2 Pound Handheld Best Electric 2.25" Rotary Knife Blade 1/2" Fabric Cloth Cutter,120V, 1250RPM, Built In Sharpener.
Lightweight Powerful Shearing
The smallest round knife available, powered by Eastman's Perma-Field Motor, the D2 shear has *40% more power that any other hand held cutter of its size. It's streamlined lightweight construction eliminates operator fatigue, while improving cutting quality. 2-1/4" round blade for general use or hexagon blade for sheer or difficult to cut cloth. The Chickadee is the smallest rotary shear available with more power than any other handheld knife its size.
Benefits:
Lightweight Powerful Shearing
The smallest round knife available, powered by Eastman's Perma-Field Motor, the D2 shear has *40% more power that any other hand held cutter of its size. It's streamlined lightweight construction eliminates operator fatigue, while improving cutting quality. 2-1/4" round blade for general use or hexagon blade for sheer or difficult to cut cloth. The Chickadee is the smallest rotary shear available with more power than any other handheld knife its size.
Benefits:
-
Eliminated Operator Fatigue
- Lightweight cutting
- Ergonomically designed with grip-actuated on/off switch
Efficiency
- Cutting capacity is 25% greater than competitive models
- On-the-spot sharpening with a built-in sharpener
- Easy to control of the ergonomically designed grip-attached on/off switch
- Eliminated fray when cutting shear or difficult to cut cloth due to the hexagonal blade option
- Built-in sharpener
- Stabilizer Shoe: The standard foot attachment, a utility feature that lends itself well to all cutting and slitting operations.
Extended US Warranty: 6 Months Parts and 90 Days Labor Service on defects in material and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
Weight: 0.85kg.
-
Horsepower: 0.10hp
-
Blade Size: 2.25"
-
Blade Size in cm: 5.72
-
Cutting Capacity: 0.5"
-
Cutting Capacity in cm: 1.27
Blades
-
Circular: Standard
-
Hexagon: Optional Available
-
Semi-square: N/Available
-
Octagon: N/Available
Bases
-
Stabilizer Shoe: Standard
Click HERE for Instruction Book and Parts List for all Eastman Round Cutters
Click HERE for Parts Manual only just for Eastman Red Chickadee D2 or D2H
You Tube User Video on same Eastman Chickadee D2 Red Electric Rotary Cutter, Showing Features
Eastman WB-1 Workerbee Cordless 2-1/32" Rotary Knife Blade Shear Heavy Duty Hand Held Cutter Cutting Machine, Charger and Spare Battery
 8037: Eastman WB-1 Workerbee Cordless 2" Rotary Knife Blade Shear HD Cutter |
Our Price: $599.95 Prices are subject to change, and only current prices will be honored. Availability: OUT OF STOCK Condition: New In Box |
Features
Whether you work in the textile, marine, auto or any industry where cutting material by hand is part of your operation - the Eastman WorkerBee will become a staple in your toolbox. The Eastman Cutting Head features a fixed shear plate with a spring-loaded blade to insure an effortless and clean 'scissors cut' through the lightest materials without jamming.
The body of the WorkerBee is a powerful rechargeable professional quality cordless power tool. This combined with an Eastman designed cutting head creates a breakthrough in cutting mobility.
And being cordless means that the WorkerBee will never 'sting' the cord shutting down the cutting action.
More Eastman WorkerBee Features:
• Equipped with a 2 1/32" round blade.
• The Ergonomically Designed Handle is well-suited for both right and left-handed operation.
• Adjustable Blade Safety Gurad.
• Push-button Blade Sharpener.
• Adjustable 2-position handle for in-line and pistol grip use.
• The motor outputs 60 lbs. of maximum torque.
Eastman's newest round knife cutting machine has bridled the gap to portability. The Workerbee combines Eastman's tried and true Buzzaird cutting head with a compact industrial grade motor and battery pack to provide powerful, cordless cutting with 60 lbs of torque.
Benefits
• Ease-of-Use Battery-powered cordless cutting On-the-spot sharpening with a built-in sharpener
• Heavy-duty Cutting Cutting through heavier industrial-type materials with the Workerbee's 60 lbs. of torque
• Lightweight Cutting Cutting through lighter materials without jamming with the Workerbee's fixed shear plate and spring-loaded blade
Eastman Workerbee Rotary Shears
All Eastman Rotary Shears
The body of the WorkerBee is a powerful rechargeable professional quality cordless power tool. This combined with an Eastman designed cutting head creates a breakthrough in cutting mobility.
And being cordless means that the WorkerBee will never 'sting' the cord shutting down the cutting action.
More Eastman WorkerBee Features:
• Equipped with a 2 1/32" round blade.
• The Ergonomically Designed Handle is well-suited for both right and left-handed operation.
• Adjustable Blade Safety Gurad.
• Push-button Blade Sharpener.
• Adjustable 2-position handle for in-line and pistol grip use.
• The motor outputs 60 lbs. of maximum torque.
Eastman's newest round knife cutting machine has bridled the gap to portability. The Workerbee combines Eastman's tried and true Buzzaird cutting head with a compact industrial grade motor and battery pack to provide powerful, cordless cutting with 60 lbs of torque.
Benefits
• Ease-of-Use Battery-powered cordless cutting On-the-spot sharpening with a built-in sharpener
• Heavy-duty Cutting Cutting through heavier industrial-type materials with the Workerbee's 60 lbs. of torque
• Lightweight Cutting Cutting through lighter materials without jamming with the Workerbee's fixed shear plate and spring-loaded blade
Eastman Workerbee Rotary Shears
All Eastman Rotary Shears
Extended US Warranty: 6 Months Parts and 90 Days Labor Service on defects in material and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Download Product PDFThe Workerbee is a powerful, professional grade, cordless rotary shear. It is designed with the same precision cutting features as our standard rotary shears but with the convenience and portability that is afforded by battery power. The Workerbee is equipped with a 2.03" (5.16 cm) blade and a 7.2 volt battery pack - allowing for longer run time.
• Variable and reverse trigger provides 0 to 2,000 rpm blade speed
• 7.2V battery pack allows for longer-run time
• Equipped with a charger and a spare battery for backup
• Battery charger will fully recharge the battery in one hour
Motors
7.2 volt
Horsepower
.33hp
Weight
2 lbs. 7 oz. (1.22kg)
Blades
Standard: Circular Optional: Semi-square, Octagon
Options
Optional: Ball Tip, Pelican
Blade Size
2.03 in. (5.16cm)
Cutting Capacity
0.38 in. (0.96cm)
Disclaimer
All indicated specifications, dimensions, weights and performance data are approximate and subject to change without notice
Engle HSG-0 Handheld Electric Hot Knife Heat Cutter +HSGM Type R Cutting Blade, 2Lb, 6ft Cord, for Synthetic Fabrics Rope Edges, Germany HeiBschneider
 7738: Engle HSGM 60W Handheld Electric Hot Knife Heated Cutter +Cutting Blade |
Our Price: $269.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Includes One HSG-O Engblader Blade H/205 Type R for HeiBschneider HSGM, HSG0 Handheld Electric Hot Knife Cutters, synthetic fabrics, ropes, strings. Color may vary from Green to Grey.
The manufacturer's sealed box does not include a blade, Allbrands provides the 1 blade to make it complete
"The HSG-O HSGM Hot Knife will cut and seal synthetic canvas fabric. The tip of the blade is relatively sharp". HSG-O HSGM Hot Knife is UL Underwriters Laboratories Listed
The manufacturer's sealed box does not include a blade, Allbrands provides the 1 blade to make it complete
"The HSG-O HSGM Hot Knife will cut and seal synthetic canvas fabric. The tip of the blade is relatively sharp". HSG-O HSGM Hot Knife is UL Underwriters Laboratories Listed
- Cuts small and large lengths of sythetic woven or knitted fabric in straight lines and curves while simultaneously fusing the edges to prevent fraying. The blade heats quickly, eliminating idle time. Also suitable for cutting and welding ropes, cords, and cables made of fully synthetic fibers such as nylon and polyester.
- Hot cutting is made easy with the HSG-0 hand held cutter. Heats up in just 6-8 seconds, and cuts and seals the edges of synthetic fabric, such as cords, ropes, bands and belting fabric.
- This cutter is so easy and economical to use; you will wonder how you did without it.
- Made for cutting acrylic fabrics. Excellent to cutting nylon rope or webbing. Cuts and welds ends cleanly! The newer model has lights to help with following cut lines.
Type HSGO AC only, 110v- 60Hz, 60 W, UL Listed 71B9
- Heat may be controlled by switching tool on and off. Light activated by heat switch.
- Re: cutting PVC coated material. PVC releases a hazardous fume when cut with heat that has been known to cause lung problems.
HSGM HSG-0 Heat Cutter (SKU: H/100, 110V/60Hz/70W). Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. Heat up time of a blade, approx. 6-8 seconds. Heat temperature of a blade, approx. 1100 degrees Fahrenheit (600* C.). Blade heat may be roughly controlled by depressing/releasing the trigger. A variety of different sytle HSGM blades are sold separately. This unit is also available in 220 volt (Part #H/100-220). This product is always in stock. Made in Germany.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
Model: HSG0
-
Electrical: 1/110V
-
Power input: 60 watts
-
Intermittent operation: ¼ min.
-
Cord length: (6.5 ft)2 m
-
Weight: 2.2 Lbs (1 kg)
HSG-O Parts List:
01 - Housing, green ID: H/801
01 - Housing, gray ID: H/801-PA
02 - Round screw ID: H/802
03 - Hexagon Nut ID: H/803
04 - Slotted Round Nut M2.5x32 ID: H/804
05 - Hexagon Round screw ID: H/805
06 - Front Housing Plate ID: H/806
07 - Round screw ID: H/807
08 - Hexagon Nut ID: H/808
09 - Lamp ID: H/809
10 - Hook ID: H/810
11 - Trigger ID: H/811
12 - Pin-Op Switch ID: H/812
13 - Lever Return Spring ID: H/813
14 - Transformer, 110 Volt ID: H/814-110
15 - Terminal Plate ID: H/815
16 - Retaining Plate ID: H/816
17 - Round screw (replaced by H/807) ID: H/817
18 - Mains Lead ID: H/818
19 - Lead Bushing ID: H/819
20 - Microswitch ID: H/820
21 - Socket ID: H/821
22 - Retaining Screw for Blade ID: H/822
23 - Condensor ID: H/823
24 - Resistor ID: H/824
25 - Slit-head Screwdriver for HSG-0 ID: H/825
Yamata FY8-1 Handheld 2.2" or 56mm Rotary Blade Fabric Shear Cloth Cutter Cutting Machine (WDJ81, WDJ8-1) Could be Red or Green
 4038: Yamata FY8-1 Handheld 56mm Rotary Blade Fabric Shear Cloth Cutter (WDJ81) |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Suitable for trimming cotton, woolen, linen thin leather and chemical fiber goods, etc.
Neat cutting, small-curvature radius curvilinear cutting.
Neat cutting, small-curvature radius curvilinear cutting.
- Low noise, stable running, easy to operate and high efficiency.
- Comes with 5-sided blade and set of motor brushes
- 55 watts
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Gemsy Jiasew CS-100 Stand Up 4" Rotary Knife Blade Shear, Fabric Cutter
 2211: Gemsy Jiasew CS-100 Stand Up 4" Rotary Knife Blade Shear, Fabric Cutter |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 4" Diameter Rotary Cutting Blade
- Shoe Slides Between Table & Fabric
- Cuts Up To 15 Layers
- Lightweight And Compact
- 110 Volts
- Stand-Up Cloth Cutter
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Gemsy Lejiang YJ-90B Electric Stand Up 3.5" Rotary Blade Fabric Cutter Cutting Machine*
 53123: Gemsy Lejiang YJ-90B Electric Stand Up 3.5" Rotary Blade Fabric Cutter* |
Our Price: $129.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 3 1/2 inch Rotary Cutting Blade
- Shoe Slides Between Table & Fabric
- Light And Compact
- Stand-Up Cloth Cutter
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Model: YJ-90BThickness: 30mm
Power: 200W
Voltage: 110-127V
Frequency: 60Hz
Speed: 2400 Rotations per Minute
Maximum Fabric Cutting Thickness: 30mm
Gemsy Lejiang YJ-65 2.5" Handheld Rotary Blade Cutter Fabric Shear Cutting Machine
 56474: Gemsy Lejiang YJ-65 2.5" Rotary Blade Cutter Fabric Shear Cutting Machine |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
2.5" Blade 110V. 150W
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Gemsy Jiasew CS1-1 Electric 2" Rotary Blade, Handheld Cloth Cutting Cutter Machine. Extra Hexagonal Blade .8Amps, 110V, 3 Pounds
 2212: Jiasew CS1-1 Electric 2" Rotary Blade, Handheld Cloth Cutting Machine |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Light And Compact
- 110 Volts
- Cloth Cutter
- Weighs 1 pound
- Color may vary
Cuts up to 5 layers of fabric.
This Gemsy CS-100 cutter does include a sharpening stone. You would attach the stone to the unit, and run the machine to sharpen the blade.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Gingher G-TNKE 4.5in Knife Edge Thread Scissors, Snips, Clippers, Trimmers
 6610: Gingher G-TNKE 4.5" Knife Edge Thread Scissors Snips Clippers Trimmers |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 4 1/2" inch knife edge thread nippers, double-plated chrome over nickel, packaged in hangbag
- The knife edge model is capable of cutting through thick layers of fabric as well as heavier yarns. This model can be used for tasks such as clipping curves as well as cutting thread and yarn of all types. The index finger rests underneath the nippers while the thumb goes on top - the middle finger goes through the loop to stabilize the frame while index finger and thumb push blades together to peform the cutting action. Our quality craftsmanship assures sharp cutting all the way to the tips and a smooth, easy clipping action.
See Videos on Gingher GG-TNKE 4 1/2 inch Knife Edge Thread Nippers
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
These Gingher double-chrome plated 4-1/2″ Thread Cutters(also called thread nippers) have knife edge blades and smooth self-opening spring action. They are beautifully finished and measure 4-1/2″ in overall length.Gingher scissors are forged, which makes the metal harder so the scissor stays sharp longer.
Hira-To Advanced Flat Hone Scissor Sharpener USA for Japanese Convex Edge or Barber, Beauty, Pet Shears, Scissors, Trimmers, Specify 110/220V+LED Lamp
 |
Our Price: $3,499.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
We are excited to announce that our Hira-to Flat Hone Sharpening is in stock! We are filling orders for those who had one back-ordered. If you have been holding off on placing an order, now is the time!
Patented Fixture and Arm Assembly. Fixture designed to Sharpen Both Right and Left Hand Shears! The Flat Inside of the Shear is Clamped into the Head of the Fixture Enabling You to Set an Accurate Angle Every Time!
Sliding Arm Allows You to Convex the Entire Front Surface of the Shear! No More Missing the Back Side of the Spine!!
Ergonomically Correct Fixture Mimics Free-Hand Sharpening Perfectly! Variable Speed, forward and Reverse with Quick Change Head! Create a Factory Look and Factory Edge!!!
The Hira-To® is a single head flat hone with a patented fixture and arm assembly. The fixture sharpens both right hand and left hand shears and allows you to set a precise angle making sharpening a breeze. The sliding arm allows the sharpener to convex the entire front surface of the shear. Because of this the sharpener will not miss the back side of the spine. The machine has variable speed, forward and reverse controls, and a quick change head.
APPLYING DIAMOND PASTE. Questions come up from time-to-time about the proper way to apply diamond paste to the felt disc on the Hira-To®. This short video will walk you through the steps.
RESTORING A THINNING SHEAR
Restoring a thinning shear is simple with Wolff equipment. This video will show you the steps involved in repairing a thinner with a bent tooth.
Patented Fixture and Arm Assembly. Fixture designed to Sharpen Both Right and Left Hand Shears! The Flat Inside of the Shear is Clamped into the Head of the Fixture Enabling You to Set an Accurate Angle Every Time!
Sliding Arm Allows You to Convex the Entire Front Surface of the Shear! No More Missing the Back Side of the Spine!!
Ergonomically Correct Fixture Mimics Free-Hand Sharpening Perfectly! Variable Speed, forward and Reverse with Quick Change Head! Create a Factory Look and Factory Edge!!!
The Hira-To® is a single head flat hone with a patented fixture and arm assembly. The fixture sharpens both right hand and left hand shears and allows you to set a precise angle making sharpening a breeze. The sliding arm allows the sharpener to convex the entire front surface of the shear. Because of this the sharpener will not miss the back side of the spine. The machine has variable speed, forward and reverse controls, and a quick change head.
- Patented Fixture and Arm Assembly, designed by Roger Kaye of Rapid Edge, Inc.
- Fixture designed to Sharpen Both Right and Left Hand Shears!
- The Flat Inside of the Shear is Clamped into the Head of the Fixture Enabling You to Set an Accurate Angle Every Time!
- Sliding Arm Allows You to Convex the Entire Front Surface of the Shear! No More Missing the Back Side of the Spine!!
- Ergonomically Correct Fixture Mimics Free-Hand Sharpening Perfectly!
- Variable Speed, forward and Reverse with Quick Change Head!
- Create a Factory Look and Factory Edge!
OVERVIEW VIDEO
This video shows an overview of how to sharpen stylist shears for the beauty industry on the Hira-To® Sharpening System. This system is designed to recreate the convex edge and restore a shear back to factory specs.
RESTORING A BEAUTY SHEAR
Occasionally you will run across a shear that has been badly damaged by a previous sharpener. This video will walk you through a number of steps involved in bring a badly damaged shear back to life.
APPLYING DIAMOND PASTE. Questions come up from time-to-time about the proper way to apply diamond paste to the felt disc on the Hira-To®. This short video will walk you through the steps.
RESTORING A THINNING SHEAR
Restoring a thinning shear is simple with Wolff equipment. This video will show you the steps involved in repairing a thinner with a bent tooth.
Extended US Warranty: 2 Year Limited Warranty
Non-US Warranty: 30 days parts and labor.
Specifications
When you want to provide the absolute best edge possible on high end convex shears, look no further than the Wolff Industries Hira-To® Scissors Sharpening System. The Hira-To® is designed to sharpen and convex beauty, barber, and grooming scissors. It is easier, faster, and more precise when sharpening convex scissors than traditional systems.The Hira-To® is a single head flat hone designed to recreate the factory look and edge on high end convex or semi-convex beauty, barber, and grooming scissors. It was developed with a focus on the fixture and arm assembly. The Hira-To® fixture is ergonomically contoured to fit the natural curvature of the sharpener's hand offering sharpeners of many skill levels the opportunity to match the free-hand style used by Japanese bladesmiths. Both right and left hand shears can be sharpened at any angle ranging from 25° to 65°.
This sharpener is the most advanced single head flat hone on the market with multi-direction switching, 0-2500 RPM variable speed, and electronic shaft break. It is compatible with pressure sensitive adhesive discs or hook and loop discs.
All scissors sharpeners come with a comprehensive training DVD that will walk you through the steps of sharpening numerous shears. This exhaustive training tool will teach you how to properly use your new sharpener and produce quality results every time!
Features
Creates a perfect convex or semi-convex edge
Accommodates many blade types, shapes, sizes, tapers, and angles
Sharpens right and left hand scissors
Hook and loop discs.
Technical Specifications:
Shipping Weight - 28 lbs
Shipping - Boxed
Package Dimensions - 20 x 12 x 12
Power Source - Corded Electric
Plug Type - Three Prong
Voltage - 110 V, 220 V
Amperage - 5 A
Wattage - 200
Frequency - 60 Hz, 50 Hz
Speed - 0 - 2500 rpm
Phase - 1
Plate Outer Diameter - 6 in
Plate Inner Diameter - 0.375 in
Sharpening Angles - 25 to 65 degrees
Specifications subject to change without notice
Did you notice?
The rotating head and shaft contoured for comfort.
The forward, stop, and reverse variable speed drive.
The LED quick connect lamp.
Recommended For:
All types of barber, beauty, and pet grooming scissors
High or low volume scissors sharpening
Retail, home, or industrial use
- Available with PSA or hook & loop
- Made in the USA by Wolff Industries, Inc.
- Forward, stop, and reverse switchng
- 0 - 2500 RPM variable speed
- Electronic shaft break
- 12 Vdc quick connect LED lamp
- Patented flat hone fixture - technology licensed from Roger Kaye - Rapid Edge Inc.
- Rotating head and shaft contoured for comfort
- Engraved angle setting from 25 to 65 degrees
- Sharpens both right and left hand shears
- More information on the Hira-To®
- Buy the HIRA-TO® with PSA abrasive pads
Kai 5275 Japan 11" Stainless Steel Scissors Shears Bent Trimmer Cuts 4.75" for Fabrics and Upholstery, Soft Ergonomic Santoprene Handles, From JAPAN
 Kai 5275-FE Factory Edge 11" Bent Soft Shears |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai Japan 7250 10" Professional Scissors Shears Bent Trimmers, Heavy Duty for Fabric, Drapery, Upholstery Materials Cutting
 13290: Kai Japan 7250 10" Scissor Shear Bent Trimmer, Heavy Duty Fabric Cutter |
Our Price: $73.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The KAI 7000 series High-Carbon stainless steel shears have an extra-long edge life and superior cutting efficiency. Designed for professional use, these tailoring style shears are ideal for clothing construction and for perfect pattern cutting. Excellent on all types of fabrics including: silks, cottons, denim, fleece, leather, tapestry, upholstery fabrics and drapery. Smooth cutting action and super sharp blades make these the sharpest fabric scissors available.
Includes Hardened Steel Blades, Soft Ergo Thermal Plastic Handle Inserts, Made in JAPAN, for Right and Left Hand Use The KAI 7000 series High-Carbon stainless steel shears have an extra-long edge life and superior cutting efficiency. Designed for professional use, these tailoring style shears are ideal for clothing construction and for perfect pattern cutting. Excellent on all types of fabrics including: silks, cottons, denim, fleece, leather, tapestry, upholstery fabrics and drapery. Smooth cutting action and super sharp blades make these the sharpest fabric scissors available.
Includes Hardened Steel Blades, Soft Ergo Thermal Plastic Handle Inserts, Made in JAPAN, for Right and Left Hand Use The KAI 7000 series High-Carbon stainless steel shears have an extra-long edge life and superior cutting efficiency. Designed for professional use, these tailoring style shears are ideal for clothing construction and for perfect pattern cutting. Excellent on all types of fabrics including: silks, cottons, denim, fleece, leather, tapestry, upholstery fabrics and drapery. Smooth cutting action and super sharp blades make these the sharpest fabric scissors available.
- Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
- Full-length "blade-to-grip" design for optimal cutting balance.
- Novel duplex interlock screw for lasting blade tension.
- Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.
Kai 7000 Series Product Brochure (.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7250 is the 10-inch professional scissor that is ideal for thicker, more difficult fabrics. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last. The 10-inch Kai 7250 is considered an ideal length for most sewing enthusiasts. Capable of cutting thicker fabrics with ease, the Kai 7250 meets almost all sewing project cutting needs.-
Length: 10" (250mm)
-
Edge: Smooth
-
Handedness: Right
- Handle: Bent
Kai Japan 7250-L True Left Hand 10 Inch Professional Scissors, Shears, Bent Trimmers, 3-3/4" Cut
 30931: Kai Japan 7250-L True Left Hand 10" Scissors, Shears, Bent Trimmers |
Our Price: $79.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The KAI 7000 series High-Carbon stainless steel shears have an extra-long edge life and superior cutting efficiency. Designed for professional use, these tailoring style shears are ideal for clothing construction and for perfect pattern cutting. Excellent on all types of fabrics including: silks, cottons, denim, fleece, leather, tapestry, upholstery fabrics and drapery. Smooth cutting action and super sharp blades make these the sharpest fabric scissors available.
Kai 7000 Series Product Brochure (.PDF)
Kai 7000 Series Product Brochure (.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
The KAI 7250L - 10 in True Left-Handed Professional Shear that is ideal for use on most sewing projects. A true left-handed scissor has a left-handed grip and its blades are reversed from that of a right-handed scissor. This allows a left-handed user to benefit from a more comfortable grip as well as a more precise cut. WEIGHT: 7.6 OUNCESLength: 10" (250mm)
Handedness: Left
Type: Tailoring Shears
What is the difference between left and right hand Scissors?
With left handed scissors, the blades are the other way round (the half that comes up when you open them is on the left), so that when cutting the blades are pushed together instead of apart like what would happen if a leftie used right-handed scissors. also, if the scissors have angled grips so your fingers are more comfortable and slide in better, those are the other way around as well (as your fingers are coming in from the other side.
Kai 7280 Japan 11 Inch Professional Tailor Scissors Shears Bent Trimmers, Heavy Duty Fabric Cutter, 5 Inch Cut
 13291: Kai 7280 Japan 11" Tailor Scissors Shears Bent Trimmer, Fabric Cutter |
Our Price: $79.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
The 7000 Series is a new generation of professional tailoring shears. The blades are made of AUS8A stainless steel (3.7 – 4 mm. in thickness) and hardened up to 58+/-1 HRC. The shears are elegantly matte finished and equipped with a patented duplex interlock fastener that prevents the screw from becoming loose. The fastener is also heat treated and hardened up to 45 +/- 1 HRC.
- Full metal handle underneath Santoprene soft thermal ergonimic black handle insert for comfort.
- Permanent Soft Thermal Plastic Insert
- Made of high-carbon Molybdenum Vanadium, high carbon stainless steel for extra long edge light and high cutting efficiency.
-Double-locking nuts for strength and tension
-Lightweight for comfort cutting
-Professionally diamond honed cutting edge
-Larger handles to reduce stress on hands
-Thicker blades for heavy duty cutting of materials
Kai 7000 Series Product Brochure (.PDF)
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7280 is the 11-inch professional scissor that is ideal for thicker, more difficult fabrics. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last.Length: 11" (280mm)
Edge: Smooth
Handedness: Right
Handle: Bent
Kai 7280-M Japan 11 Inch Professional Kevlar Serrated Scissors Shears Bent Trimmers, Heavy Duty Fabric Cutter, 5 Inch Cut
 90748: Kai 7280-M Japan 11" Kevlar Serrated Scissors Shears Bent Trimmer, Fabric Cutter |
Our Price: $109.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The 7000 Series is a new generation of professional tailoring shears. The blades are made of AUS8A stainless steel (3.7 – 4 mm. in thickness) and hardened up to 58+/-1 HRC. The shears are elegantly matte finished and equipped with a patented duplex interlock fastener that prevents the screw from becoming loose. The fastener is also heat treated and hardened up to 45 +/- 1 HRC.
- Full metal handle underneath Santoprene soft thermal ergonimic black handle insert for comfort.
- Permanent Soft Thermal Plastic Insert
- Made of high-carbon Molybdenum Vanadium, high carbon stainless steel for extra long edge light and high cutting efficiency.
-Double-locking nuts for strength and tension
-Lightweight for comfort cutting
-Professionally diamond honed cutting edge
-Larger handles to reduce stress on hands
-Thicker blades for heavy duty cutting of materials
Kai 7000 Series Product Brochure (.PDF)
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7280-M is the 11-inch professional scissor that is ideal for thicker, more difficult fabrics, including Kevlar. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last.Length: 11" (280mm)
Edge: Partial Serrated
Handedness: Right
Handle: Bent
Kai Japan 7300 12" Bent Trimmers, Heavy Duty All Metal Commercial Professional Scissors Shears. Soft Handles, Thermal Plastic Insert. 5.5" Cut
 13292: Kai 7300 Japan 12"HD Heavy Duty All Metal Bent Trimmers, Scissors Shears |
Our Price: $89.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
- Full-length "blade-to-grip" design for optimal cutting balance.
- Novel duplex interlock screw for lasting blade tension.
- Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.
Kai 7000 Series Product Brochure (.PDF)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7300 is the 12-inch professional scissor that is ideal for thicker, more difficult fabrics. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last. The carbon also allows the finer edge to be more durable, which in- turn, extends the cutting life of these professional scissors. It is also considered an ideal length for upholsterers and upholstery projects.Length: 12" (300mm)
Blade: Smooth
Handedness: Right
Handle: Bent
Mundial 498-10 M420-10in Commercial Heavy Duty Hot Dropped Forged Scissors, Shears, Bent Trimmers, 4 -1/2" cut
 12454: Mundial 498-10 M420-10" Heavy Duty Forged Scissor Shears Bent Trimmers |
Our Price: $51.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
Mundial's 10" Industrial Stay-Set Bent Trimmers are hot-drop forged and nickel-plated, which means an exceptional, durable performance for the industrial or frequent sewer and are a must-have for every toolbox and garage. The patented Stay-Set pivot assembly is uniquely engineered to allow for easy adjustment of the ride. Once set to your personal preference, it stays set even under the most demanding of applications. The knife edge is able to cut easily through multiple layers of fabric or heavy-duty material cleanly to the very tip. The blades are strong, long-lasting, and designed for easy re-sharpening, while the handle is coated in a black enamel for comfort and reduced hand fatigue. The bent handle allows easier access to hard to reach places and the 4 1/2" cut makes these shears perfect for both everyday and more demanding cutting and sewing jobs.
- 10-inch bent trimmers with long-lasting durable blades
- 4-1/2-inch cut; knife edge; hot-drop forged and nickel-plated construction
- Stay-Set pivot assembly for simple, secure adjustment of the ride
- Black-enameled handles for comfort and reduced hand fatigue; made in Brazil
- Measures approximately 10 by 4 by 1 inches; Lifetime Guarantee
- Professional knife-edge, industrial/tailor. Ideal for cutting multiple layers with maximum ergonomic control.
- Hot drop-forged, nickel plated blades and black handles.
- Stay-set pivot assembly.
Non-US Warranty: 30 days parts and labor.
Specifications
Product Dimensions: 10 x 4 x 1 inchesFull length: 10" - 254mm
Cut length: 4 7/8" - 124mm
Mundial M422-12" Heavy Duty Metal Scissors Shears Bent Trimmers New model of M498-12
 12455: Mundial 498-12, M422-12" Heavy Duty Metal Scissors Shears Bent Trimmers |
Our Price: $59.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
Professional knife-edge, industrial/tailor. Ideal for cutting multiple layers with maximum ergonomic control.
- Hot drop-forged, nickel plated blades and black handles.
- Stay-set pivot assembly.
Non-US Warranty: 30 days parts and labor.
Specifications
Full length: 12" - 305mmCut length: 6 1/8" - 156mm
Peggys 8688-100 Wider 40mm Stitch Eraser PSE3 Original Corded Electric Embroidery Thread Shaver, Stitch Ripper Clipper Trimmer, Optional Seam Fix Grab
 |
Our Price: $74.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Easily erase, remove machine embroidery stitches from nearly every fabric, even knits and satin jackets! Comes with protective oil, cleaning brushes and instructions.
Engineered for the embroidery industry, the Peggy's Stitch Eraser features a specially designed cutting head and powerful motor which makes removing stitches faster and easier.
The latest incarnation of Peggy's famous Stitch Eraser® includes the Stitch Eraser® itself, the detachable power cable/charger, user manual, cleaning solution, and cleaning brush. Engineered for the embroidery industry, the Peffy's Stitch Eraser 3 features a specially designed cutting head and powerful motor which makes removing stitches faster and easier.
Peggy's Stitch Eraser removes stitches in fabric without damage to the material! A must for anyone who sews. Perfect for home or shop, no matter what size operation you have. Just plug in the Stitch Eraser, trim your mistakes away! Your garment will be left virtually un-touched, and can be re-used, saving you valuable time and effort. When required, simply replace the blade cartridge, and you'll be ready to go.
Engineered for the embroidery industry, the Peggy's Stitch Eraser features a specially designed cutting head and powerful motor which makes removing stitches faster and easier.
The latest incarnation of Peggy's famous Stitch Eraser® includes the Stitch Eraser® itself, the detachable power cable/charger, user manual, cleaning solution, and cleaning brush. Engineered for the embroidery industry, the Peffy's Stitch Eraser 3 features a specially designed cutting head and powerful motor which makes removing stitches faster and easier.
Peggy's Stitch Eraser removes stitches in fabric without damage to the material! A must for anyone who sews. Perfect for home or shop, no matter what size operation you have. Just plug in the Stitch Eraser, trim your mistakes away! Your garment will be left virtually un-touched, and can be re-used, saving you valuable time and effort. When required, simply replace the blade cartridge, and you'll be ready to go.
- Removes Stitches From Garments And Embroidery
- Removes Bobbin Thread From The Underside
- Doubles As A Seam Ripper
- Lightweight And Portable
- 80" Power Cord
- Professional Embroidery Shaver
- Special cutting head
- Powerful motor
- Lightweight & portable
- Removes stitches from almost anything
- Easy to clean and maintain
- Unlike regular razors, this unit has a special blade for cutting thread.
- Blade #3 is for Corded or #8 is for Cord/Cordless models.
Peggy's Stitch Eraser removes stitches in fabric without damage to material! A must for anyone who sews! How to Use a Peggy Stitch Eraser Turn the garment inside out - Remember inside out/upside down. SATIN STITCH: Turn the PSE3 on and point the "tooth area" of the blades against the grain of the satin stitch for a second and then move along gradually in one direction or move it back and forth one or two times until the backing shows up. Continue sliding across the stitched area. After that, flip the hooped garment to the front and pick the stitches out by scratching it with your finger nail or use the PSE3.
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
- Special cutting head and a powerful motor makes removing embroidery mistakes easier and faster
- Lightweight and portable, weighs only a few ounces!
- Used for removing stitches from garments, curtains, crafts, and embroidery quickly and effortlessly
- Easy to clean and maintain
- Unlike traditional razors, the Peggy's Stitch Eraser has a blade which is especially made for cutting thread
Peggy’s Stitch Eraser is an easy-to-use, time-saving stitch eraser tool that removes embroidery mistakes and unwanted stitches quickly and easily. The unit comes with clipper oil, a cleaning brush, and detailed instructions. It is 110 volts, uses very little energy and provides a consistent flow of power for precision stitch removal. by Deborah Jones
Peggy's Stitch Eraser Demonstration:
View More Videos on Peggy's Stitch Eraser
The Tool of Tools!!!
A deadline to meet?
A disappointed customer?
Supervisors breathing down your neck?
Hundreds of missewn garments?
Have no fear...Peggy's Here!
Peggy's Stitch Eraser®
Is Here to Help You!
Peggy's Stitch Eraser® is the original Stitch Eraser® tool designed by an embroiderer for embroiderers. It is used to remove stitches from embroidery and all types of stitch patterns.
Erases stitches like never before! Used world-wide by:
* Embroiderers
* Interior Decorators
* Tailors
* Drapery Specialists
* Auto Seat Upholsterers
* Furniture Upholsterers
* Hospitals
* Furriers
* Alteration Shops
* Garment Manufacturers
* Leather Boot Manufacturers
* Shoe Manufacturers
* Home Makers
* A must for anyone who sews!
Peggys SE999 Narrow Blade 10mm Stitch Eraser 9, Cord Cordless Embroidery Thread Tool Shaver, Clipper, Ripper, Trimmer, Add Seam Fix Thread Remover $10
 83104: Peggys New SE-999 Narrow Stitch Eraser Cord and Cordless Electric Embroidery Shaver |
Our Price: $74.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Peggy's Stitch Eraser® is the original Stitch Eraser® tool designed by an embroiderer for embroiderers.
It is used to remove stitches from embroidery and all types of stitch patterns.
The Tool of Tools!!!
A deadline to meet?
A disappointed customer?
Supervisors breathing
down your neck?
Hundreds of missewn garments?
Have no fear...Peggy's Here!
Peggy's Stitch Eraser® Is Here to Help You!
Erases stitches like never before! Used world-wide by:
It is used to remove stitches from embroidery and all types of stitch patterns.
The Tool of Tools!!!
A deadline to meet?
A disappointed customer?
Supervisors breathing
down your neck?
Hundreds of missewn garments?
Have no fear...Peggy's Here!
Peggy's Stitch Eraser® Is Here to Help You!
Erases stitches like never before! Used world-wide by:
- Embroiderers
- Interior Decorators
- Tailors
- Drapery Specialists
- Auto Seat Upholsterers
- Furniture Upholsterers
- Hospitals
- Furriers
- Alteration Shops
- Garment Manufacturers
- Leather Boot Manufacturers
- Shoe Manufacturers
- Home Makers
- A must for anyone who sews!
Easily erase, remove machine embroidery stitches from nearly every fabric, even knits and satin jackets! Comes with protective oil, cleaning brushes and instructions.
Engineered for the embroidery industry, the Peggy's Stitch Eraser features a specially designed cutting head and powerful motor which makes removing stitches faster and easier.
The latest incarnation of Peggy's famous Stitch Eraser® includes the Stitch Eraser® itself, the detachable power cable/charger, user manual, cleaning solution, and cleaning brush. Engineered for the embroidery industry, the Peffy's Stitch Eraser 3 features a specially designed cutting head and powerful motor which makes removing stitches faster and easier.
Peggy's Stitch Eraser removes stitches in fabric without damage to the material! A must for anyone who sews. Perfect for home or shop, no matter what size operation you have. Just plug in the Stitch Eraser, trim your mistakes away! Your garment will be left virtually un-touched, and can be re-used, saving you valuable time and effort. When required, simply replace the blade cartridge, and you'll be ready to go.
- Removes Stitches From Garments And Embroidery
- Removes Bobbin Thread From The Underside
- Doubles As A Seam Ripper
- Lightweight And Portable
- 80" Power Cord
- Professional Embroidery Shaver
- Special cutting head
- Powerful motor
- Lightweight & portable
- Removes stitches from almost anything
- Easy to clean and maintain
- Unlike regular razors, this unit has a special blade for cutting thread.
- Blade #3 is for Corded or #8 is for Cord/Cordless models.
Peggy's Stitch Eraser removes stitches in fabric without damage to material! A must for anyone who sews! How to Use a Peggy Stitch Eraser Turn the garment inside out - Remember inside out/upside down. SATIN STITCH: Turn the SE-999 on and point the "tooth area" of the blades against the grain of the satin stitch for a second and then move along gradually in one direction or move it back and forth one or two times until the backing shows up. Continue sliding across the stitched area. After that, flip the hooped garment to the front and pick the stitches out by scratching it with your finger nail or use the SE-999.
Peggy’s Stitch Eraser 9 is an easy-to-use, time-saving stitch eraser tool that removes embroidery mistakes and unwanted stitches quickly and easily.
Features Include:
- New Head Configuration (Smaller Cutting Head allows you to work in small design areas, and with seams and hems)
- Stainless Steel and Ceramic cutting blades reduce friction, extending the life of the blades
- Operation as corded or cordless device
- 3.6 volt NmH Batteries (Nickel Metal Hydride)
- Extended usage between charges
- Eliminates out-of-reach electric outlets
- Low-voltage usage-an enhanced safety feature
- Recharges when in the “off” position
- Charging Light goes from red to green when fully charged
- Includes: Detachable Power cable/charger, User’s Guide, Warranty card, Brush and Oil
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
New since 2017 - introducing the Stitch Eraser® 9! Designed to be a companion to the Stitch Eraser 3 or 8c, this latest incarnation of Peggy's famous Stitch Eraser® features a smaller cutting head to work in smaller areas.- Special cutting head and a powerful motor makes removing embroidery mistakes easier and faster
- Lightweight and portable, weighs only a few ounces!
- Used for removing stitches from garments, curtains, crafts, and embroidery quickly and effortlessly
- Easy to clean and maintain
- Unlike traditional razors, the Peggy's Stitch Eraser has a blade which is especially made for cutting thread
Peggy's Stitch Eraser Demonstration:
Peggy’s Stitch Eraser is an easy-to-use, time-saving stitch eraser tool that removes embroidery mistakes and unwanted stitches quickly and easily. The unit comes with clipper oil, a cleaning brush, and detailed instructions. It is 110 volts, uses very little energy and provides a consistent flow of power for precision stitch removal.
View More Videos on Peggy's Stitch Eraser
The Tool of Tools!!!
A deadline to meet?
A disappointed customer?
Supervisors breathing down your neck?
Hundreds of missewn garments?
Have no fear...Peggy's Here!
Peggy's Stitch Eraser®
Is Here to Help You!
Peggy's Stitch Eraser® is the original Stitch Eraser® tool designed by an embroiderer for embroiderers. It is used to remove stitches from embroidery and all types of stitch patterns.
Erases stitches like never before! Used world-wide by:
* Embroiderers
* Interior Decorators
* Tailors
* Drapery Specialists
* Auto Seat Upholsterers
* Furniture Upholsterers
* Hospitals
* Furriers
* Alteration Shops
* Garment Manufacturers
* Leather Boot Manufacturers
* Shoe Manufacturers
* Home Makers
* A must for anyone who sews!
Peggys SE-999BL Upper Lower Replacement Blade Set for Narrow 10mm Stitch Eraser 9 Electric Embroidery Thread Shaver
 96035: Peggys SE-999BL Replacement Blade for Narrow 10mm Stitch Eraser 9 Electric Embroidery Thread Shaver |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Peggy's Stitch Eraser® is the original Stitch Eraser® tool designed by an embroiderer for embroiderers.
It is used to remove stitches from embroidery and all types of stitch patterns.
The Tool of Tools!!!
A deadline to meet?
A disappointed customer?
Supervisors breathing
down your neck?
Hundreds of missewn garments?
Have no fear...Peggy's Here!
Peggy's Stitch Eraser® Is Here to Help You!
Erases stitches like never before! Used world-wide by:
It is used to remove stitches from embroidery and all types of stitch patterns.
The Tool of Tools!!!
A deadline to meet?
A disappointed customer?
Supervisors breathing
down your neck?
Hundreds of missewn garments?
Have no fear...Peggy's Here!
Peggy's Stitch Eraser® Is Here to Help You!
Erases stitches like never before! Used world-wide by:
- Embroiderers
- Interior Decorators
- Tailors
- Drapery Specialists
- Auto Seat Upholsterers
- Furniture Upholsterers
- Hospitals
- Furriers
- Alteration Shops
- Garment Manufacturers
- Leather Boot Manufacturers
- Shoe Manufacturers
- Home Makers
- A must for anyone who sews!
Easily erase, remove machine embroidery stitches from nearly every fabric, even knits and satin jackets! Comes with protective oil, cleaning brushes and instructions.
Engineered for the embroidery industry, the Peggy's Stitch Eraser features a specially designed cutting head and powerful motor which makes removing stitches faster and easier.
The latest incarnation of Peggy's famous Stitch Eraser® includes the Stitch Eraser® itself, the detachable power cable/charger, user manual, cleaning solution, and cleaning brush. Engineered for the embroidery industry, the Peffy's Stitch Eraser 3 features a specially designed cutting head and powerful motor which makes removing stitches faster and easier.
Peggy's Stitch Eraser removes stitches in fabric without damage to the material! A must for anyone who sews. Perfect for home or shop, no matter what size operation you have. Just plug in the Stitch Eraser, trim your mistakes away! Your garment will be left virtually un-touched, and can be re-used, saving you valuable time and effort. When required, simply replace the blade cartridge, and you'll be ready to go.
- Removes Stitches From Garments And Embroidery
- Removes Bobbin Thread From The Underside
- Doubles As A Seam Ripper
- Lightweight And Portable
- 80" Power Cord
- Professional Embroidery Shaver
- Special cutting head
- Powerful motor
- Lightweight & portable
- Removes stitches from almost anything
- Easy to clean and maintain
- Unlike regular razors, this unit has a special blade for cutting thread.
- Blade #3 is for Corded or #8 is for Cord/Cordless models.
Peggy's Stitch Eraser removes stitches in fabric without damage to material! A must for anyone who sews! How to Use a Peggy Stitch Eraser Turn the garment inside out - Remember inside out/upside down. SATIN STITCH: Turn the SE-999 on and point the "tooth area" of the blades against the grain of the satin stitch for a second and then move along gradually in one direction or move it back and forth one or two times until the backing shows up. Continue sliding across the stitched area. After that, flip the hooped garment to the front and pick the stitches out by scratching it with your finger nail or use the SE-999.
Peggy’s Stitch Eraser 9 is an easy-to-use, time-saving stitch eraser tool that removes embroidery mistakes and unwanted stitches quickly and easily.
Features Include:
- New Head Configuration (Smaller Cutting Head allows you to work in small design areas, and with seams and hems)
- Stainless Steel and Ceramic cutting blades reduce friction, extending the life of the blades
- Operation as corded or cordless device
- 3.6 volt NmH Batteries (Nickel Metal Hydride)
- Extended usage between charges
- Eliminates out-of-reach electric outlets
- Low-voltage usage-an enhanced safety feature
- Recharges when in the “off” position
- Charging Light goes from red to green when fully charged
- Includes: Detachable Power cable/charger, User’s Guide, Warranty card, Brush and Oil
Non-US Warranty: 30 days parts and labor.
Specifications
New since 2017 - introducing the Stitch Eraser® 9! Designed to be a companion to the Stitch Eraser 3 or 8c, this latest incarnation of Peggy's famous Stitch Eraser® features a smaller cutting head to work in smaller areas.- Special cutting head and a powerful motor makes removing embroidery mistakes easier and faster
- Lightweight and portable, weighs only a few ounces!
- Used for removing stitches from garments, curtains, crafts, and embroidery quickly and effortlessly
- Easy to clean and maintain
- Unlike traditional razors, the Peggy's Stitch Eraser has a blade which is especially made for cutting thread
Peggy's Stitch Eraser Demonstration:
Peggy’s Stitch Eraser is an easy-to-use, time-saving stitch eraser tool that removes embroidery mistakes and unwanted stitches quickly and easily. The unit comes with clipper oil, a cleaning brush, and detailed instructions. It is 110 volts, uses very little energy and provides a consistent flow of power for precision stitch removal.
View More Videos on Peggy's Stitch Eraser
The Tool of Tools!!!
A deadline to meet?
A disappointed customer?
Supervisors breathing down your neck?
Hundreds of missewn garments?
Have no fear...Peggy's Here!
Peggy's Stitch Eraser®
Is Here to Help You!
Peggy's Stitch Eraser® is the original Stitch Eraser® tool designed by an embroiderer for embroiderers. It is used to remove stitches from embroidery and all types of stitch patterns.
Erases stitches like never before! Used world-wide by:
* Embroiderers
* Interior Decorators
* Tailors
* Drapery Specialists
* Auto Seat Upholsterers
* Furniture Upholsterers
* Hospitals
* Furriers
* Alteration Shops
* Garment Manufacturers
* Leather Boot Manufacturers
* Shoe Manufacturers
* Home Makers
* A must for anyone who sews!
Peggy's PSE3 Stitch Eraser 3
 |
Our Price: $74.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
The Stitch Eraser® 3 stitch remover is the most widely used stitch removal tool in the world. Peggy's Stitch Eraser 3 is the corded version. It works with a standard 110v plug. Remove mistakes in embroidery and other sewing projects.
Peggy's Stitch Eraser removes stitches in fabric without damage to material! A must for anyone who sews!
Special cutting head with 1¼" wide blade
Powerful motor
Lightweight & portable
Removes stitches from almost anything
Easy to clean and maintain
Unlike regular razors, this unit has a special blade for cutting thread
Peggy's Stitch Eraser removes stitches in fabric without damage to material! A must for anyone who sews!
Special cutting head with 1¼" wide blade
Powerful motor
Lightweight & portable
Removes stitches from almost anything
Easy to clean and maintain
Unlike regular razors, this unit has a special blade for cutting thread
Extended US Warranty: 6 month manufacturer warranty
Non-US Warranty: 30 days parts and labor.
Specifications
- Special cutting head and a powerful motor makes removing embroidery mistakes easier and faster
- Lightweight and portable, weighs only a few ounces!
- Used for removing stitches from garments, curtains, crafts, and embroidery quickly and effortlessly
- Easy to clean and maintain
- Unlike traditional razors, the Peggy's Stitch Eraser has a blade which is especially made for cutting thread
Peggy’s Stitch Eraser is an easy-to-use, time-saving stitch eraser tool that removes embroidery mistakes and unwanted stitches quickly and easily. The unit comes with clipper oil, a cleaning brush, and detailed instructions. It is 110 volts, uses very little energy and provides a consistent flow of power for precision stitch removal. by Deborah Jones
Peggy's Stitch Eraser Demonstration:
View More Videos on Peggy's Stitch Eraser
The Tool of Tools!!!
A deadline to meet?
A disappointed customer?
Supervisors breathing down your neck?
Hundreds of missewn garments?
Have no fear...Peggy's Here!
Peggy's Stitch Eraser®
Is Here to Help You!
Peggy's Stitch Eraser® is the original Stitch Eraser® tool designed by an embroiderer for embroiderers. It is used to remove stitches from embroidery and all types of stitch patterns.
Erases stitches like never before! Used world-wide by:
* Embroiderers
* Interior Decorators
* Tailors
* Drapery Specialists
* Auto Seat Upholsterers
* Furniture Upholsterers
* Hospitals
* Furriers
* Alteration Shops
* Garment Manufacturers
* Leather Boot Manufacturers
* Shoe Manufacturers
* Home Makers
* A must for anyone who sews!
Reliable 7000FE 4" Rotary Blade Fabric End Cutter 96” Track Lifter Set (Replaces XD-510L) ETA April 2022 110 volt
 11762: Reliable 7000FE 4" Rotary Blade Fabric End Cutter 96” Track Lifter Set |
Our Price: $1,599.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The RELIABLE 7000FE is the perfect labor saving solution for many cutting room applications.
The Simple Solution
Everything you need to start end cutting is included. A heavy-duty 4" cutting head with a manual sharpener, 96" track with lifter set and uprights with a piece goods bar for your fabric. Simply roll out your material, turn the cutter head on, and push the cutting head along the track. It's that simple.
Saves Time and Money
If you are using two people to cut, one on each side of a cutting table, chances are the 7000FE is the right machine for you. Everything you need to convert to a one-person operation is included.
The Simple Solution
Everything you need to start end cutting is included. A heavy-duty 4" cutting head with a manual sharpener, 96" track with lifter set and uprights with a piece goods bar for your fabric. Simply roll out your material, turn the cutter head on, and push the cutting head along the track. It's that simple.
Saves Time and Money
If you are using two people to cut, one on each side of a cutting table, chances are the 7000FE is the right machine for you. Everything you need to convert to a one-person operation is included.
- 4" cutting blade
- Built-in sharpening mechanism
- 96" track with lifter set
- High-power electric motor
- Uprights with piece goods bar
- Retractable handle
Best used for:
- Light - medium/heavy weight fabric
- Natural and man-made fibers
Reliable Warranty Information (.PDF)
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Model: 7000FEElectrical: 1/110V
Blade size: 4”
Sharpening mechanism: Single stone - spring loaded
Lubrication: Manual
Shipping dimensions:
-(1) 13” x 8” x 50”
-(1) 5” x 2” x 97”
Shipping weight: 55 lbs
Warranty: RELIABLE Limited 1 Year Warranty
Reliable 1500FR Stand Up 8-Sided Octagonal 4 Inch Blade Rotary Cutter Cutting Machine, Optional Round Blades
 8094: Reliable 1500FR Stand Up 8-Side 4" Blade Rotary Cutter Cutting Machine |
Our Price: $209.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
GREAT LITTLE PERFORMER
The Reliable 1500FR can cut from a single ply of fabric right up to 1” high, making it a very versatile, lightweight machine. Perfect for sample making or other light-duty operations.
IDEAL FOR SMALL CUTS
The combination of the octagonal blade, with carbide tipped and spring loaded lower blade, prevents the fabric from jamming. An extra thin base plate and light die cast design makes the 1500FR a pleasure to operate from the novice to the pro.
POWERFUL MOTOR
Powerful AC motor works like a champ to cut through up to 1" of material.
AUTOMATIC SHARPENER
The automatic sharpener guarantees a sharp edge on every cut.
KNIFE GUARD
Adjustable front knife guard helps ensure operator safety.
COUNTER BLADE
Reduces sharpening needs, lengthens life of the blade, and reduces pull of the fabric.
EXTRA THIN BASE PLATE
The lightweight aluminum base plate is extra thin to allow for a precise and smooth cutting experience.
SIDE KNIFE GUARD
The fixed side knife guard safety feature ensures the operator is protected at all times.
Other Features:
The Reliable 1500FR can cut from a single ply of fabric right up to 1” high, making it a very versatile, lightweight machine. Perfect for sample making or other light-duty operations.
IDEAL FOR SMALL CUTS
The combination of the octagonal blade, with carbide tipped and spring loaded lower blade, prevents the fabric from jamming. An extra thin base plate and light die cast design makes the 1500FR a pleasure to operate from the novice to the pro.
POWERFUL MOTOR
Powerful AC motor works like a champ to cut through up to 1" of material.
AUTOMATIC SHARPENER
The automatic sharpener guarantees a sharp edge on every cut.
KNIFE GUARD
Adjustable front knife guard helps ensure operator safety.
COUNTER BLADE
Reduces sharpening needs, lengthens life of the blade, and reduces pull of the fabric.
EXTRA THIN BASE PLATE
The lightweight aluminum base plate is extra thin to allow for a precise and smooth cutting experience.
SIDE KNIFE GUARD
The fixed side knife guard safety feature ensures the operator is protected at all times.
Other Features:
- Extra-thin base plate
- 1" cutting capacity
- Individually tested before shipping
- High-power electric motor
- Extra blade, blade key, stone, grease, and motor brush included
- Automatic sharpener
Best used for:
- Light to medium weight fabrics
- Woven or loosely knit fabric
Reliable Warranty Information (.PDF)
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
The Octagonal Round Knife Machine from the Reliable Corporation can cut from a single ply of fabric up to 1 inch thick, making it a very versatile, lightweight machine. Perfect for sample making or other light-duty operations. Extra blade, blade key, stone, grease, and motor brush are included.-
1/110 Volt
-
Blade Size: 4" (100 mm) Octagonal
-
Cutting Capacity: 1" (25 mm)
-
Weight: 6.4lbs (2.9 kg)
-
Sharpening Mechanism: single stone (spring loaded)
- Lubrication: manual
Suprena Japan HC-1005A-C Electric 2" or 50mm Rotary Blade Shear Cutter Cutting Machine, Cuts up to 1/4" Thick
 |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
World-wide best seller, lightweight mini cutter. Available for small radius curved cutting without any slippage. Built-in Automatic Sharpener. Small hand held cloth cutting machine with round knife blade and carbide tipped bottom blade for scissor like precision cutting.
- Small 50mm round blade.
- Stationary carbide counter blade for fine cutting.
- Built-in one touch automatic blade sharpener.
- Double insulated motor for electrical protection.
- Easy hand grip for better cutting manoeuvrability.
- Micro switch hand lever for easy operation.
- The HC-1005A-C is not the cheapest hand held cutter on the market, (nor the most expensive) but year after year it remains the same. Customers around the globe know that the HC-1005A-C is the standard by which all other handhelds are measured.
- If you are looking for a great little cutting machine to add to your tools, let us introduce you to the HC-1005A-C. This dynamo is suitable for a wide range of fabrics, and can cut up to 1/4" of fabric.
- The HC-1005A-C is a tough machine, ready for all day use. Cut from a single ply of fabric for samples all the way up to 1/4" thick for production without a problem.
- Standard features include a one-touch sharpener, stationary carbide and counter blade, and a double insulated motor.
Best used for:
- Light to medium weight fabrics
- Woven and knit fabric
Features:
- One-touch sharpener
- Stationary carbide and counter blade
- Double insulatged motor
- Lightweight and ergonomic design
Suprena HC-1005AThis electric MINI CUTTER provides a most powerful and amazingly fastest cutting performance, having many distinguished features such as:
recessed sharp for total visibility, double insulated motor, one-touch sharpener, carbide stationary counter cutting blade, build in lubricator,lightweight and different type of knifes. Maximum cutting hight is 8mm (5/16") depending on type of materials. Lays should not be higher than it's height.
Video from Australia is Model 1007A with 220V. Ours is 1005A with 110V
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Model Number: HC-1005A-C
- 1/110V
- 2-1/2" (63.5mm) Round Blade
- Cutting Capacity: 1/4" (25 mm)
- Weight: 2.5 lbs (1.13kg)
- Sharpening Mechanism: single stone (spring loaded)
- Lubrication: manual
Reliable 6000FS 8" Straight Knife Blade Cloth Cutting Cutter Machine (Replaces XD-629)
 29661: Reliable 6000FS 8" Straight Knife Blade Cloth Cutting Cutter Machine (Replaces XD-629) |
Our Price: $1,299.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For the larger cuts
The 6000FS is your best choice for cuts that are up to 8” in total height. It’s designed with a low center of gravity for ease of handling and features the best power to weight ratio in the industry.
Power and Performance
The 6000FS is the popular choice where power and performance are the top priority. Equipped with a 0.65 hp motor and a 1-1/2” cutting stroke, the 6000FS will handle all but the toughest cutting jobs.
FEATURES
• 3400-RPM high power motor
• Oil indicator window
• Uni-safe locking plug
• Weight 32 Lb
• Individually tested before shipping
Reliable Warranty Information (.PDF)
Please Note the blade length does not equal the amount of stacked material that can be cut. The cut depth will depend on the thickness, texture and density of the material you are using. If you are unsure if this cutter will suit your application please contact us to let us know the material that you are using, and we will be happy to offer our best recommendation
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Electrical: 110VHorsepower: .65 hp
Speed: 3,400 RPM
Stroke: 1½"
Lubrication: Manual
Sharpening bands: Medium
Net weight: 31.2 lb – 14.1 kg
Shipping weight: 36.6 lb – 16.6 kg
Product dimensions: 11.5" x 7.75" x 20.5"
Shipping dimensions: 25.75" x 14.25" x 10.5"
Country of origin: China
Warranty: Limited 1 year
Reliable 5000FS (Replaces XD-EU5) 5" Straight Knife Cloth Cutting Matchine - Factory Serviced
 83182: Reliable 5000FS (XD-EU5) 5" Straight Knife Cloth Cutting Machine 1/3HP - Factory Serviced |
Our Price: $649.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: ON BACKORDER Condition: Factory Serviced |
Features
The use of a die cast housing ensures lightweight and easy operation, while the safety mechanisms assure the proper protection is provided for the operator.
- Automatic sharpening system
- Low-profile ergonomic design
- Powerfull 1" stroke
Best used for:
- Light to medium weight fabrics
- Woven and knit fabric
Reliable Info Sheet (.PDF)
Reliable Warranty Information (.PDF)
Please Note the blade length does not equal the amount of stacked material that can be cut. The cut depth will depend on the thickness, texture and density of the material you are using. If you are unsure if this cutter will suit your application please contact us to let us know the material that you are using, and we will be happy to offer our best recommendation
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Model: 5000FSElectrical: 110V
Horsepower: 1/3 h.p.
Speed: 3,400 rpm (single speed)
Stroke: 1"
Blade size: 5"
Sharpening belts: Medium
Lubrication: Manual
Dimensions - net: 6.25" x 10.5" x 15.5"
Weight - net: 20 lbs
Shipping dimensions: 13" x 21" x 10"
Shipping weight: 25 lbs
Warranty: RELIABLE™ 1 Year Warranty
Superior AS100LH 24in Long Handle 2in Rotary Cutter +Blades, Brushes, Coupling, 3 Wire 9' Cord, 2x6 Sided Blades, 2 Sharpener Stones, 2 Motor Brushes
 |
Our Price: $339.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
High torque motor cuts the heaviest goods with ease. Includes: EXTRA SET OF BRUSHES, REPLACEMENT BLADE, and SPARE COUPLING. Ships with (AS1026 Hexagon Blade)
High torque motor cuts the heaviest goods with ease. Includes: EXTRA SET OF MOTOR BRUSHES, REPLACEMENT BLADE, and SPARE COUPLING. Ships with (AS1026 Hexagon Blade)
Extends model AS100 two feet (0.7m) for convenient cutting across work surface.
High torque motor cuts the heaviest goods with ease. Includes: EXTRA SET OF MOTOR BRUSHES, REPLACEMENT BLADE, and SPARE COUPLING. Ships with (AS1026 Hexagon Blade)
Extends model AS100 two feet (0.7m) for convenient cutting across work surface.
- For Light Duty Applications
- 2 inch, Six Sided Blade for Cutting Light Fabrics or Leather up to a
Maximum of 3/8" Thickness
- 110 Volts with 9 foot power supply cord
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Superior AS100 Electric 2" Rotary Blade Cutter, Shear Cutting Machine
 |
Our Price: $249.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
High torque motor cuts the heaviest goods with ease, Includes: EXTRA SET OF BRUSHES, REPLACEMENT BLADE, and SPARE COUPLING. Ships with AS1026 Hexagon Blade.
- For Light Duty Applications
- 2 inch, Six Sided Blade for Cutting Light Fabrics or Leather up to a
Maximum of 3/8" Thickness
- 110 Volts with 9 foot power supply cord
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Superior AS1026 2" 6-Sided Blade, AS100 Rotary Cutter Cutting Machine
 |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 2 inch blade for Cutting Light Fabrics or Leather up to a maximum of 3/8" Thickness
- For use with the Superior AS100 Rotary Cutter
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Superior AS1026RD 2" Round Blade for AS100 Rotary Cutter Cutting Machines
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 2 inch blade for Cutting Light Fabrics or Leather up to a maximum of 3/8" Thickness
- For use with the Superior AS100 Rotary Cutter
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Technix RC100 EWRS100 Stand Up 4" Rotary Hexagonal 6-Sided Knife Blade Cutter, Cutting Machine, Choose 110V or 220V (KM Model RS100)
 12432: Technix RC100 EWRS100 Stand Up 4" Rotary Knife Blade Cutter Machine |
Our Price: $174.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 4" Rotary Cutting Blade
- Shoe Slides Between Table & Fabric
- Cuts Up To 15 Layers
- Light And Compact
- 110 and 220 Volt options available
- Stand-Up Cloth Cutter
- The guards are adjustable. It should cut 1" to 1-1/2" thickness.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Wiss W20 10" Inlaid Scissors Shears Tailors Bent Trimmers, Heavy Duty All Metal
 |
Our Price: $34.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Professional, Industrial/Tailor. Ideal for heavy-duty extensive, multiple layer cutting
- Hot drop-forged, polished blades with black handle.
- Patented set-easy pivot, easy hand adjustment.
Non-US Warranty: 30 days parts and labor.
Specifications
Full Length: 10"Cut Length: 4 3/4"
Wiss W22 12" Inlaid Heavy Duty All Metal Scissors Shears Bent Trimmers
 |
Our Price: $40.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Professional, Industrial/Tailor. Ideal for heavy-duty extensive, multiple layer cutting
- Hot drop-forged, polished blades with black handle.
- Patented set-easy pivot, easy hand adjustment.0
Non-US Warranty: 30 days parts and labor.
Specifications
Full Length: 12"Cut Length: 6" 1/8"
Wolff OGC-TAS Twice As Sharp Ookami Gold Scissor Shear Sharpener without Convexing Clamp
 12706: Wolff OGC-TAS Twice As Sharp Ookami Gold Scissor Shear Sharpener |
Our Price: $879.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
COMPLETE Professional Scissor Sharpener Machine System, Diamond Polish Buffing Wheels, Compound Hone Block, DVD *Includes Wolff OGU-TAS UPGRADE PACKAGE from Pro-TAS to Ookami Gold Scissor Sharpening: Manual, Video, Diamond (Extra Polishing & Buffing Wheels) Compound & Honing Block Kit
The OOKAMI® Gold Scissor Sharpening System is a versatile sharpening system that works well on both professional hair shears and on grooming shears.
The OOKAMI® Gold Scissor Sharpening System is a 2 wheel system utilizing the 800 grit Diamond Sharpening Wheel and the OOKAMI® Felt Polishing Wheel. The sharpening and polishing clamp allows you to set a precise angle and sharpens both right and left handed shears.
Overview:
The Ookami Gold® Complete Scissors Sharpening System is the next step above the Twice As Sharp® Professional Scissors Sharpener. This scissors sharpening system allows you to sharpen a full range of shears from the high-end salon shears for stylists to low-end barber and beauty scissors as well as other industrial, fabric, and sewing scissors.
It comes fitted with an 800 grit diamond wheel and pressed composite Ookami Gold® polishing wheel. Ookami Gold® polishing compound is included for use with the polishing wheel. The Ookami Gold® honing block kit is included to help re-establish the ride line. These tools allow you to create an incredibly sharp cutting edge strong enough to stand the rigors of daily use in a modern salon. An array of other tools and accessories are included for sharpening professional beauty shears making the Ookami Gold® one of the most versatile sharpening systems.
The Ookami Gold® Scissors Sharpening System also comes fitted with an arm and clamp assembly that can be set to match all possible angles on most scissors and shears up to 14 inches in length. This allows you to confidently sharpen any shear to the exact angle best suited to your customer’s needs. If you ever have questions about angles or how to sharpen different styles of shears, the Ookami Gold® Scissors Sharpening System comes with an in-depth manual that lists many of the best angles for each different style. If you need more help, give us a call for additional support.
All scissors sharpeners come with a comprehensive training DVD that will walk you through the steps of sharpening numerous shears. This exhaustive training tool will teach you how to properly use your new sharpener and produce quality results every time!
Features:
The OOKAMI® Gold Scissor Sharpening System is a versatile sharpening system that works well on both professional hair shears and on grooming shears.
The OOKAMI® Gold Scissor Sharpening System is a 2 wheel system utilizing the 800 grit Diamond Sharpening Wheel and the OOKAMI® Felt Polishing Wheel. The sharpening and polishing clamp allows you to set a precise angle and sharpens both right and left handed shears.
Overview:
The Ookami Gold® Complete Scissors Sharpening System is the next step above the Twice As Sharp® Professional Scissors Sharpener. This scissors sharpening system allows you to sharpen a full range of shears from the high-end salon shears for stylists to low-end barber and beauty scissors as well as other industrial, fabric, and sewing scissors.
It comes fitted with an 800 grit diamond wheel and pressed composite Ookami Gold® polishing wheel. Ookami Gold® polishing compound is included for use with the polishing wheel. The Ookami Gold® honing block kit is included to help re-establish the ride line. These tools allow you to create an incredibly sharp cutting edge strong enough to stand the rigors of daily use in a modern salon. An array of other tools and accessories are included for sharpening professional beauty shears making the Ookami Gold® one of the most versatile sharpening systems.
The Ookami Gold® Scissors Sharpening System also comes fitted with an arm and clamp assembly that can be set to match all possible angles on most scissors and shears up to 14 inches in length. This allows you to confidently sharpen any shear to the exact angle best suited to your customer’s needs. If you ever have questions about angles or how to sharpen different styles of shears, the Ookami Gold® Scissors Sharpening System comes with an in-depth manual that lists many of the best angles for each different style. If you need more help, give us a call for additional support.
All scissors sharpeners come with a comprehensive training DVD that will walk you through the steps of sharpening numerous shears. This exhaustive training tool will teach you how to properly use your new sharpener and produce quality results every time!
Features:
- 800 grit Diamond sharpening wheel.
- Ookami Gold® polishing wheel, polishing compound, and honing block kit.
- Free floating arm system and double sealed Rulon® bearings for years of maintenance free use.
- Original Twice as Sharp® Standard Shears-Lock Clamp that accommodates many blade types, shapes, sizes, tapers, and angles.
Did you notice?
The sharpener can make your scissors 2 to 6 times sharper than new!
The Ookami Gold® dust ports made for use with the DC-1000 Dust Collector or adaptor rings.
The Ookami Gold® model is equipped with the Ookami Gold® polishing wheel
The CSA electrical rating.
The Ookami Gold® model can be rewired for 220 V use.
Recommended For:
All types of barber, beauty, and pet grooming scissors as well as industrial, fabric, and sewing shears.
High or low volume scissors sharpening
Retail, home, or industrial use
What's in the Box?
Ookami Gold® Scissors Sharpener
Ookami Gold® Polishing Wheel
Ookami Gold® Polishing Compound
Ookami Gold® Honing Block Kit
Ookami Gold® DVD
Ookami Gold® Manual
800 Grit Diamond Sharpening Wheel
Practice Beauty Shears
Deluxe Screw Pliers Kit
Repair Parts Kit
Set Adjusting Tool
Fine White Hone
Diamond Cleaning Stick
100 grit Standard Sharpening Wheel
Professional Honing Wheel
Standard Shears-Lock Clamp
Angle Gage
Pink Hone
Scissors Lubricant
Wheel Dresser
Hex Wrench
Sales Poster
Eyeshields
Safety Glasses
Dust Mask
Professional Operator's Manual
Industrial Instructional Training DVD
Includes:
Ookami Gold Sharpener System
Ookami Gold Industrial Video
Ookami Gold Industrial Manual
Ookami Gold Polishing Wheel
Ookami Gold Polishing Compound
Ookami Gold Honing Block Kit
Diamond Sharpening Wheel 800 grit
Practice Beauty Shears
Shears Lock Clamp
Deluxe Screw Pliers Kit
Set Adjusting Tool
Repair Parts Kit
Angle Gage
Fine White Hone
Standard Sharpening Wheel
Professional Honing Wheel
Professional Instructional Video
Professional Operators Manual
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Technical Specifications:Sharpener Weight - 12 lbs
Shipping Weight - 25 lbs
Shipping - Boxed
Package Dimensions - 20 x 12 x 12
Power Source - Corded Electric
Plug Type - 3 Pin Type B, 2 Pin
Voltage - 120 V, 220 V
Amperage - 1.3 A
Wattage - 375
Frequency - 60 Hz, 50 Hz
Speed - 3450 rpm, 3000 rpm
Phase - 1
Horsepower - 1/4 hp
Motor - condenser run, TENV 100% duty cycle
Bearings - Precision double-sealed (SKF 6202-2RS1 or equivalent) ball bearings
Wheel Diameter - 5 in
Wheel Bore - 0.5 in
Wheel Face - 0.5 in
Diamond Sharpening Wheel - 800 grit
Ookami Gold® Polishing Wheel - pressed composite wheel
Standard Sharpening Wheel - 100 grit fine grain friable aluminum oxide
Professional Honing Wheel - 600 grit cotton impregnated with fine silicon carbide
Sharpening Angles - 0 to 55 degrees
Clamp Opening - 0.6 in
Arm Assembly - double sealed Rulon® bearings
CSA Certified - CSA C22.2 No 71.2-M89 - Electric Bench Tools and UL 987, Sixth Edition - Stationary and Fixed Electric Tools
U.S. Patent # 4,528,778
Canadian Patent # 1 243 487
German Patent # DE 3490 065 C2
Specifications subject to change without notice
- 14" stroke without reclamping
- Weight: Unit only 12 pounds; Boxed 14 pounds.
- Voltage: 110-130 a.c., 60 cycle. Wattage 375, 3450 rpm can be set to run on 220-240 a.c. 50/60 cycle, 3000 rpm
- Motor: 1/4 H.P. condenser run. TENV 100% duty cycle
• SHARPENING WHEEL
5" x ½" x ½" - 100 grit fine grain friable aluminum oxide
5" x ½" x ½" - 800 grit Diamond Sharpeneing Wheel
• HONING/BUFFING WHEEL
5" x ½" x ½" - 400 Grit Cotton impregnated with fine silicon carbide
5" x ½" x ½" - Felt Polishing Wheel
• MOTOR
¼ h.p. condenser run, TENV 100% duty cycle
• BEARINGS
Precision ball bearings. Double-sealed (SKF 6202-2RS1 or equivalent)
• SHARPENING ARMS
Double-sealed Rulon® bearings, no maintenance required
• SHARPENING CLAMP
Set angles from 0 – 57 degrees, clamp opens to ¾ of an inch
• ELECTRICITY
110V-130V a.c. 60 cycle
• POWER
375W, 3450 rpm, Can be set to run on 220-240 a.c. 50 cycle 3000 rpm
• DIMENSIONS AND WEIGHT
Boxed 24 pounds
• 2 YEAR MANUFACTURERS WARRANTEE
All of Wolff’s sharpening systems come with a full two year warranty that covers parts and labor on defects in workmanship and materials.
- Bearings: Precision ball bearings. Double sealed (SKF 6202-2RS1 or equivalent)
- Arms: Double sealed Rulon bearings, no maintenance required
- Sharpening Wheel: 5" x 1/2" x 1/2", 100 grit aluminum silicon carbide
- Buffing Wheel: Nylon impregnated with fine silicon carbide
- Sharpening Angles: 0 to 57
- Clamp Opening: .600"
- Special clamp position scissors for precise duplication of bevel.
- Sharpen curved blades and pinking shears easily.
- Lifetime sealed bearings provide years of maintenance free use.
- 1/4 Hp Ball Bearing, condenser runs motor at 3450 rpm.
Easy-to-read manual and video tape included.
Click Start Button > below to View Wolff Twice as Sharp and Hira Flat Blade Sharpening systems on You Tube
Click HERE for Steps to sharpen OOKAMI GOLD® style convex shears with OPTIONAL convexing clamp
Wolff OGC-TAS Twice As Sharp Ookami Gold Scissor Shear Sharpener with Convexing Clamp
12706: Wolff OGC-TAS Twice As Sharp Ookami Gold Scissor Shear Sharpener |
Our Price: $1,143.81 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
COMPLETE Professional Scissor Sharpener Machine System, Diamond Polish Buffing Wheels, Compound Hone Block, DVD *Includes Wolff OGU-TAS UPGRADE PACKAGE from Pro-TAS to Ookami Gold Scissor Sharpening: Manual, Video, Diamond (Extra Polishing & Buffing Wheels) Compound & Honing Block Kit
The OOKAMI® Gold Scissor Sharpening System is a versatile sharpening system that works well on both professional hair shears and on grooming shears.
The OOKAMI® Gold Scissor Sharpening System is a 2 wheel system utilizing the 800 grit Diamond Sharpening Wheel and the OOKAMI® Felt Polishing Wheel. The sharpening and polishing clamp allows you to set a precise angle and sharpens both right and left handed shears.
Overview:
The Ookami Gold® Complete Scissors Sharpening System is the next step above the Twice As Sharp® Professional Scissors Sharpener. This scissors sharpening system allows you to sharpen a full range of shears from the high-end salon shears for stylists to low-end barber and beauty scissors as well as other industrial, fabric, and sewing scissors.
It comes fitted with an 800 grit diamond wheel and pressed composite Ookami Gold® polishing wheel. Ookami Gold® polishing compound is included for use with the polishing wheel. The Ookami Gold® honing block kit is included to help re-establish the ride line. These tools allow you to create an incredibly sharp cutting edge strong enough to stand the rigors of daily use in a modern salon. An array of other tools and accessories are included for sharpening professional beauty shears making the Ookami Gold® one of the most versatile sharpening systems.
The Ookami Gold® Scissors Sharpening System also comes fitted with an arm and clamp assembly that can be set to match all possible angles on most scissors and shears up to 14 inches in length. This allows you to confidently sharpen any shear to the exact angle best suited to your customer’s needs. If you ever have questions about angles or how to sharpen different styles of shears, the Ookami Gold® Scissors Sharpening System comes with an in-depth manual that lists many of the best angles for each different style. If you need more help, give us a call for additional support.
All scissors sharpeners come with a comprehensive training DVD that will walk you through the steps of sharpening numerous shears. This exhaustive training tool will teach you how to properly use your new sharpener and produce quality results every time!
Features:
The OOKAMI® Gold Scissor Sharpening System is a versatile sharpening system that works well on both professional hair shears and on grooming shears.
The OOKAMI® Gold Scissor Sharpening System is a 2 wheel system utilizing the 800 grit Diamond Sharpening Wheel and the OOKAMI® Felt Polishing Wheel. The sharpening and polishing clamp allows you to set a precise angle and sharpens both right and left handed shears.
Overview:
The Ookami Gold® Complete Scissors Sharpening System is the next step above the Twice As Sharp® Professional Scissors Sharpener. This scissors sharpening system allows you to sharpen a full range of shears from the high-end salon shears for stylists to low-end barber and beauty scissors as well as other industrial, fabric, and sewing scissors.
It comes fitted with an 800 grit diamond wheel and pressed composite Ookami Gold® polishing wheel. Ookami Gold® polishing compound is included for use with the polishing wheel. The Ookami Gold® honing block kit is included to help re-establish the ride line. These tools allow you to create an incredibly sharp cutting edge strong enough to stand the rigors of daily use in a modern salon. An array of other tools and accessories are included for sharpening professional beauty shears making the Ookami Gold® one of the most versatile sharpening systems.
The Ookami Gold® Scissors Sharpening System also comes fitted with an arm and clamp assembly that can be set to match all possible angles on most scissors and shears up to 14 inches in length. This allows you to confidently sharpen any shear to the exact angle best suited to your customer’s needs. If you ever have questions about angles or how to sharpen different styles of shears, the Ookami Gold® Scissors Sharpening System comes with an in-depth manual that lists many of the best angles for each different style. If you need more help, give us a call for additional support.
All scissors sharpeners come with a comprehensive training DVD that will walk you through the steps of sharpening numerous shears. This exhaustive training tool will teach you how to properly use your new sharpener and produce quality results every time!
Features:
- 800 grit Diamond sharpening wheel.
- Ookami Gold® polishing wheel, polishing compound, and honing block kit.
- Free floating arm system and double sealed Rulon® bearings for years of maintenance free use.
- Original Twice as Sharp® Standard Shears-Lock Clamp that accommodates many blade types, shapes, sizes, tapers, and angles.
Did you notice?
The sharpener can make your scissors 2 to 6 times sharper than new!
The Ookami Gold® dust ports made for use with the DC-1000 Dust Collector or adaptor rings.
The Ookami Gold® model is equipped with the Ookami Gold® polishing wheel
The CSA electrical rating.
The Ookami Gold® model can be rewired for 220 V use.
Recommended For:
All types of barber, beauty, and pet grooming scissors as well as industrial, fabric, and sewing shears.
High or low volume scissors sharpening
Retail, home, or industrial use
What's in the Box?
Ookami Gold® Scissors Sharpener
Ookami Gold® Polishing Wheel
Ookami Gold® Polishing Compound
Ookami Gold® Honing Block Kit
Ookami Gold® DVD
Ookami Gold® Manual
800 Grit Diamond Sharpening Wheel
Practice Beauty Shears
Deluxe Screw Pliers Kit
Repair Parts Kit
Set Adjusting Tool
Fine White Hone
Diamond Cleaning Stick
100 grit Standard Sharpening Wheel
Professional Honing Wheel
Standard Shears-Lock Clamp
Angle Gage
Pink Hone
Scissors Lubricant
Wheel Dresser
Hex Wrench
Sales Poster
Eyeshields
Safety Glasses
Dust Mask
Professional Operator's Manual
Industrial Instructional Training DVD
Includes:
Ookami Gold Sharpener System
Ookami Gold Industrial Video
Ookami Gold Industrial Manual
Ookami Gold Polishing Wheel
Ookami Gold Polishing Compound
Ookami Gold Honing Block Kit
Diamond Sharpening Wheel 800 grit
Practice Beauty Shears
Shears Lock Clamp
Deluxe Screw Pliers Kit
Set Adjusting Tool
Repair Parts Kit
Angle Gage
Fine White Hone
Standard Sharpening Wheel
Professional Honing Wheel
Professional Instructional Video
Professional Operators Manual
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Technical Specifications:Sharpener Weight - 12 lbs
Shipping Weight - 25 lbs
Shipping - Boxed
Package Dimensions - 20 x 12 x 12
Power Source - Corded Electric
Plug Type - 3 Pin Type B, 2 Pin
Voltage - 120 V, 220 V
Amperage - 1.3 A
Wattage - 375
Frequency - 60 Hz, 50 Hz
Speed - 3450 rpm, 3000 rpm
Phase - 1
Horsepower - 1/4 hp
Motor - condenser run, TENV 100% duty cycle
Bearings - Precision double-sealed (SKF 6202-2RS1 or equivalent) ball bearings
Wheel Diameter - 5 in
Wheel Bore - 0.5 in
Wheel Face - 0.5 in
Diamond Sharpening Wheel - 800 grit
Ookami Gold® Polishing Wheel - pressed composite wheel
Standard Sharpening Wheel - 100 grit fine grain friable aluminum oxide
Professional Honing Wheel - 600 grit cotton impregnated with fine silicon carbide
Sharpening Angles - 0 to 55 degrees
Clamp Opening - 0.6 in
Arm Assembly - double sealed Rulon® bearings
CSA Certified - CSA C22.2 No 71.2-M89 - Electric Bench Tools and UL 987, Sixth Edition - Stationary and Fixed Electric Tools
U.S. Patent # 4,528,778
Canadian Patent # 1 243 487
German Patent # DE 3490 065 C2
Specifications subject to change without notice
- 14" stroke without reclamping
- Weight: Unit only 12 pounds; Boxed 14 pounds.
- Voltage: 110-130 a.c., 60 cycle. Wattage 375, 3450 rpm can be set to run on 220-240 a.c. 50/60 cycle, 3000 rpm
- Motor: 1/4 H.P. condenser run. TENV 100% duty cycle
• SHARPENING WHEEL
5" x ½" x ½" - 100 grit fine grain friable aluminum oxide
5" x ½" x ½" - 800 grit Diamond Sharpeneing Wheel
• HONING/BUFFING WHEEL
5" x ½" x ½" - 400 Grit Cotton impregnated with fine silicon carbide
5" x ½" x ½" - Felt Polishing Wheel
• MOTOR
¼ h.p. condenser run, TENV 100% duty cycle
• BEARINGS
Precision ball bearings. Double-sealed (SKF 6202-2RS1 or equivalent)
• SHARPENING ARMS
Double-sealed Rulon® bearings, no maintenance required
• SHARPENING CLAMP
Set angles from 0 – 57 degrees, clamp opens to ¾ of an inch
• ELECTRICITY
110V-130V a.c. 60 cycle
• POWER
375W, 3450 rpm, Can be set to run on 220-240 a.c. 50 cycle 3000 rpm
• DIMENSIONS AND WEIGHT
Boxed 24 pounds
• 2 YEAR MANUFACTURERS WARRANTEE
All of Wolff’s sharpening systems come with a full two year warranty that covers parts and labor on defects in workmanship and materials.
- Bearings: Precision ball bearings. Double sealed (SKF 6202-2RS1 or equivalent)
- Arms: Double sealed Rulon bearings, no maintenance required
- Sharpening Wheel: 5" x 1/2" x 1/2", 100 grit aluminum silicon carbide
- Buffing Wheel: Nylon impregnated with fine silicon carbide
- Sharpening Angles: 0 to 57
- Clamp Opening: .600"
- Special clamp position scissors for precise duplication of bevel.
- Sharpen curved blades and pinking shears easily.
- Lifetime sealed bearings provide years of maintenance free use.
- 1/4 Hp Ball Bearing, condenser runs motor at 3450 rpm.
Easy-to-read manual and video tape included.
Click Start Button > below to View Wolff Twice as Sharp and Hira Flat Blade Sharpening systems on You Tube
Click HERE for Steps to sharpen OOKAMI GOLD® style convex shears with OPTIONAL convexing clamp
Wolff 30009 Convexing Clamp for OGC-TAS Ookami Gold, Beauty Scissor Speed Sharpener Machine, Manual, DVD
 |
Our Price: $249.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Wolff’s Newest Clamp
This clamp allows you to do a fully convexed front surface without the additional expense of a whole new unit!
Same Great Ookami® Edge
One of the great things about the Ookami Gold® Convexing Clamp is it allows you to create an edge that is second to none, the Ookami® edge. One of the sharpest edges on the market, even sharper that a factory edge!
Fast, Efficient, and Pretty
With just a few strokes the front surface of your blade will be faceted. Once that step is complete, all you need to do is polish in your blade and you’ll have a beautiful rounded edge that’s pleasing to the eye.
OOKAMI GOLD® convexing clamp is used to speed the sharpening process on Japanese style convex edge beauty shears.
Comes with Manual and DVD
Click HERE for STEPS TO USE THE
CONVEXING CLAMP
See How it Works. Here’s a video showing how to use this new Ookami Gold convexing sharpening clamp. Ookami Gold® Convexing Clamp Sharpening System Video. This video shows some tips and tricks on how to use the Ookami Gold® Convexing Clamp while sharpening on the Ookami Gold® Sharpening System.
This clamp allows you to do a fully convexed front surface without the additional expense of a whole new unit!
Same Great Ookami® Edge
One of the great things about the Ookami Gold® Convexing Clamp is it allows you to create an edge that is second to none, the Ookami® edge. One of the sharpest edges on the market, even sharper that a factory edge!
Fast, Efficient, and Pretty
With just a few strokes the front surface of your blade will be faceted. Once that step is complete, all you need to do is polish in your blade and you’ll have a beautiful rounded edge that’s pleasing to the eye.
OOKAMI GOLD® convexing clamp is used to speed the sharpening process on Japanese style convex edge beauty shears.
Comes with Manual and DVD
Click HERE for STEPS TO USE THE
CONVEXING CLAMP
See How it Works. Here’s a video showing how to use this new Ookami Gold convexing sharpening clamp. Ookami Gold® Convexing Clamp Sharpening System Video. This video shows some tips and tricks on how to use the Ookami Gold® Convexing Clamp while sharpening on the Ookami Gold® Sharpening System.
Non-US Warranty: 30 days parts and labor.
Wolff OGU-TAS Upgrade Package from Pro-TAS to Ookami Gold Scissor Sharpening System
 |
Our Price: $465.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Ookami Gold upgrade package is for the sharpener who wants to sharpen convex shears and does not need an additional motor. The wheels and parts of this package fit on the "Original" Twice as Sharp and also fit the "New" 1/4 horsepower Twice as Sharp. This package contains all the special tools needed to sharpen convex shears.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Wolff RS-COM Commercial Rotary Blade Sharpener, 1/4HP Motor, 2 Wheels, Video, Safety Glasses & Mask
 |
Our Price: $1,199.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Select 120V or 220V Options Below. Note:"Twice As Sharp" Scissor Sharpening System shown in picture is NOT INCLUDED.
Sharpens rotary cutting blades
Sharpens brands such as Olfa, Dritz, Fiskars and more
Sharpen rotary blades 1.75" to 4" diameter that have arbors of 9.9mm or 7.9mm, and a maximum thickness of 1/2 inch.
Includes:
Rotary Blade Sharpening Fixture
Blade Holder 9.9 mm ID
Blade Holder 7.9 mm ID
Rotary Blade Training Video
Safety Glasses
Rotary Blade Instruction Manual
Machine 1/4 H.P. Motor
Ookami Gold Polishing Wheel
Professional Honing Wheel
1 lb Polishing Compound
Eye Shields & Dust Mask
Note:"Twice As Sharp" Scissor Sharpening System shown in picture is NOT INCLUDED.
- Add this fixture to your existing Twice As Sharp Machine
Includes:
Rotary Blade Sharpening Fixture
Blade Holder 9.9 mm ID
Blade Holder 7.9 mm ID
Rotary Blade Training Video
Safety Glasses
Rotary Blade Instruction Manual
Machine 1/4 H.P. Motor
Ookami Gold Polishing Wheel
Professional Honing Wheel
1 lb Polishing Compound
Eye Shields & Dust Mask
Note:"Twice As Sharp" Scissor Sharpening System shown in picture is NOT INCLUDED.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Wolff RSL-FIXture Only, Rotary Knife Blade Sharpener, 28-65mm to 4-17" for Twice as Sharp Scissor Sharpening System
 56943: Wolff RSL-FIXture Only, Rotary Knife Blade Sharpener, 28-65mm to 4-17" |
Our Price: $807.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This is the Rotary Sharpener Fixture for sharpening 28mm, 45 mm, 65 mm quilting blades, AND large blades from 4" - 17".
RSL-FIX Includes:
RSL-FIX Includes:
- Rotary Sharpener Fixture assembly: Plate, Rails, and Head Assembly
- Operators manual and DVD
- Red, gold, blue and green blade holders to hold the KAI®, Dritz®, Olfa® and Fiskars® blades
- 28mm blade holder
- (2) Riser Blocks
- Dusenbury Holders
- (2) Different Large Blade Holders
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Wolff RS-FIX Commercial Rotary Knife Blade Sharpener, Fixture Only for Adding to Twice as Sharp Scissor Sharpening System, Video Safety-Glasses Holder
 |
Our Price: $799.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Add the fixture to your existing Twice As Sharp Machine or select a package that fits your needs
Includes:
Rotary Blade Sharpening Fixture
Blade Holder 9.9 mm ID
Blade Holder 7.9 mm ID
Rotary Blade Training Video
Safety Glasses
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Wolff RS-PRO Rotary Cutter Blade & PRO-TAS Scissor Sharpeners
 |
Our Price: $1,399.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Comes complete with motor and PRO-TAS Twice As Sharp Scissor Sharpening System
Includes:
Rotary Blade Sharpening Fixture
Blade Holder 9.9 mm ID
Blade Holder 7.9 mm ID
Rotary Blade Training Video
Safety Glasses
Rotary Blade Instruction Manual
Machine 1/4 H.P. Motor
Ookami Gold Polishing Wheel
Professional Honing Wheel
1 lb Polishing Compound
Eye Shields & Dust Mask
Standard Scissors Clamp
Angle Gauge for Scissors
Scissors Lube
Sharpening Wheel
Wheel Dresser
Pink Diamonite Hone
Scissors Training Video
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Wolff IND-TAS Twice As Sharp Commercial Scissor Shear and Trimmer Sharpener, Grinder Buffer Wheels, Covers, Eye Shield, Finger Guard, Video
 8182: Wolff IND-TAS Twice As Sharp Commercial Scissor Shear Trimmer Sharpener |
Our Price: $499.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
* Add an Extra Optional Wolff 27000 Grinding Sharpening Wheel, 1/2" Wide 5" Diameter, 100 Grit for IND TAS A1 Twice as Sharp and Ookami Gold Scissor Shear Trimmer Sharpener
AllBrands has been using the same Wolff "Twice as Sharp" scissor sharpeners in our sewing stores for over 40 years. We have only had to replace grinding and buffing wheels. JMD
AllBrands has been using the same Wolff "Twice as Sharp" scissor sharpeners in our sewing stores for over 40 years. We have only had to replace grinding and buffing wheels. JMD
- Select 120V or 220V Options Below
- Makes even brand new shears 4 to 6 times sharper than when purchased
- Scissors sharpened on Twice as Sharp will require less pressure to cut thereby reducing stress and will help reduce medical losses associated with carpel tunnel syndrome and cumulative trauma disorders
- This standard (economy) model is great to sharpen fabric, home, and industrial shears
- Free floating arm system & sealed bearings provide years of maintenance free use
- Eye shields, wheel covers, and finger guards for safety
- Standard buffing wheel produces shears 2 to 6 times sharper than new
- Shears-Lock clamp opens wide for thick blades, self-adjusts for balde taper
- 1/2" wide sharpening wheel, 100 grit friable aluminum oxide grain structure prevents burning
- Can use on pinking shears and curved blades
- Fast.....Sharpens 20-30 pairs per hour
- Easy.....Reduces hand pressure 20-50%
- Comes with two 5" wheels:
(1) a 1/2" wide standard sharpening wheel (#27000)
(2) a standard buffing wheel (#25000)
- Available in 110-130 a.c., 60 cycle. Wattage 375. Can be set to run on 220-240 a.c.
U.S. Patent #4,528,778 Manufactured by Wolff Industries (model STD-TAS)
Wolff Industries, Inc. is the world’s largest manufacturer of industrial scissors sharpeners, professional scissors sharpeners, grooming and beauty shears sharpeners . Wolff Industries, Inc. specializes in stainless steel shears with edges sharper than can be obtained elsewhere. Wolff Industries, Inc. is the world’s largest manufacturer of industrial scissors sharpeners, professional scissors sharpeners, grooming and beauty shears sharpeners .
- Arms Fold Back Against Machine for Compact Storage.
- Fast and Easy Professional Scissors Sharpening.
- Recommended by Leading Scissors Manufacturers.
- 1/4 HP Ball Bearing Condenser Run Motor.
- Instructional Video Included
Recommended For:
Pet grooming shears, high quality fabric shears, low priced barber and beauty shears.
High or low volume scissors sharpening
Retail, home, or industrial use
The Twice as Sharp® Professional Scissors Sharpener is designed to make sharpening your customer's shears fast, easy, and precise. The professional system comes equipped with a 100 grit sharpening wheel so you can sharpen customer's shears quickly. A 600 grit professional honing wheel is also included to highly polish your edge leaving a shiny cosmetic finish. The professional honing wheel is designed for pet grooming shears, high quality fabric shears, and low priced barber and beauty shears.
The Twice as Sharp® Professional Scissors Sharpener also comes fitted with an arm and clamp assembly that can be set to match all possible angles on any industrial scissors, grooming shear, or low-end beauty and barber shear up to 14 inches in length. This will allow you to confidently sharpen any shear to the exact angle best suited to your customer’s needs. If you ever have questions about angles or how to sharpen different styles of shears, the Professional Twice as Sharp® comes with an in-depth manual that lists many of the best angles for each different style. If you need more help, give us a call for additional support.
All of Wolff Industries’ scissors sharpeners come with a comprehensive training DVD that will walk you through the steps of sharpening numerous shears. This exhaustive training tool will teach you how to properly use your new sharpener and produce quality results every time!
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Technical Specifications:- Item Weight - 12 lbs
- Shipping Weight - 14 lbs
- Shipping - Boxed
- Package Dimensions - 11 x 10 x 10
- Power Source - Corded Electric
- Plug Type - Three Prong
- Voltage - 110 V, 220 V
- Amperage - 1.3 A
- Wattage - 375
- Frequency - 60 Hz, 50 Hz
- Speed - 3450 rpm, 3000 rpm
- Phase - 1
- Horsepower - 1/4 hp
- Motor - condenser run, TENV 100% duty cycle
- Bearings - Precision double-sealed (SKF 6202-2RS1 or equivalent) ball bearings
- Wheel Diameter - 5 in
- Wheel Bore - 0.5 in
- Wheel Face - 0.5 in
- Standard Sharpening Wheel - 100 grit fine grain friable aluminum oxide
- Professional Honing Wheel - 600 grit cotton impregnated with fine silicon carbide
- Sharpening Angles - 0 to 55 degrees
- Clamp Opening - 0.6 in
- Arm Assembly - double sealed Rulon® bearings
Designed for the Professional Sharpener - Wollf's Professional Twice as Sharp is designed to make sharpening your customer's shears fast, easy and precise. The professional system comes equipped with a 100 grit sharpening wheel so you can sharpen the shears your customers entrusts to you quickly, and a 600 grit honing wheel designed to enhance the shear so it will cut twice as sharp as it did when it was brand new. It also comes fitted with an arm and clamp assembly that can bet set to match all possibe angles on any industrial grooming, or low-end beauty/barber shear up to 14 inches in length. This will allow you to confidently sharpen any shear to the exact angle best suited to your customer's needs. An in-depth manual is included if you have questions about angles or how to sharpen different styles of shears. All of Wollf's scissors sharpening systems come with a comprehensive training video that will walk you through the steps of sharpening numerous shears. This exhaustive training tool will teach you how to properly use your new sharpener and produce quality results every time! Includes: Motor; Arm; Clamp; Wheels; Safety Glasses; Dust Mask; Scissors Lubricant; Pink Hone; Wheel Dressing Brick; Eye Shields; Hex Wrench; Angle Gage; Instruction Manual; Training Video. Billable transportation charges for freight intensive items will be the greater of the dimensional weight compared to the actual weight. In addition to transportation charges, freight carriers may assess an additional oversize charge per package.
- 14" stroke without reclamping
- Weight: Unit only 12 pounds; Boxed 14 pounds.
- Voltage: 110-130 a.c., 60 cycle. Wattage 375, 3450 rpm can be set to run on 220-240 a.c. 50/60 cycle, 3000 rpm
- Motor: 1/4 H.P. condenser run. TENV 100% duty cycle
- Bearings: Precision ball bearings. Double sealed (SKF 6202-2RS1 or equivalent)
- Arms: Double sealed Rulon bearings, no maintenance required
- Sharpening Wheel: 5" x 1/2" x 1/2", 100 grit aluminum silicon carbide
- Buffing Wheel: Nylon impregnated with fine silicon carbide
- Sharpening Angles: 0 to 57
- Clamp Opening: .600"
- Special clamp position scissors for precise duplication of bevel.
- Sharpen curved blades and pinking shears easily.
- Lifetime sealed bearings provide years of maintenance free use.
- 1/4 Hp Ball Bearing, condenser runs motor at 3450 rpm.
Easy-to-read manual and video tape included.
See All Wolff Twice as Sharp Videos
Wolff PRO-TAS Twice As Sharp Pro Commercial Scissor Shear and Trimmer Sharpener, Grinder Buffer Wheels, Covers, Eye Shield, Finger Guard, Video
 103272: Wolff PRO-TAS Twice As Sharp Professional Commercial Scissor Shear Trimmer Sharpener with Honing Wheel |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
* Add an Extra Optional Wolff 27000 Grinding Sharpening Wheel, 1/2" Wide 5" Diameter, 100 Grit for IND TAS A1 Twice as Sharp and Ookami Gold Scissor Shear Trimmer Sharpener
AllBrands has been using the same Wolff "Twice as Sharp" scissor sharpeners in our sewing stores for over 40 years. We have only had to replace grinding and buffing wheels. JMD
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
* Add an Extra Optional Wolff 27000 Grinding Sharpening Wheel, 1/2" Wide 5" Diameter, 100 Grit for IND TAS A1 Twice as Sharp and Ookami Gold Scissor Shear Trimmer Sharpener
AllBrands has been using the same Wolff "Twice as Sharp" scissor sharpeners in our sewing stores for over 40 years. We have only had to replace grinding and buffing wheels. JMD
- The Professional model can be rewired for 220 V use.
- Makes even brand new shears 2 to 6 times sharper than when purchased
- Scissors sharpened on Twice as Sharp will require less pressure to cut thereby reducing stress and will help reduce medical losses associated with carpel tunnel syndrome and cumulative trauma disorders
- The Professional model is equipped with a professional honing wheel
- Free floating arm system & sealed bearings provide years of maintenance free use
- Eye shields, wheel covers, and finger guards for safety
- Standard buffing wheel produces shears 2 to 6 times sharper than new
- Shears-Lock clamp opens wide for thick blades, self-adjusts for blade taper
- 1/2" wide sharpening wheel, 100 grit friable aluminum oxide grain structure prevents burning
- Can use on pinking shears and curved blades
- Fast.....Sharpens 20-30 pairs per hour
- Easy.....Reduces hand pressure 20-50%
- Comes with two 5" wheels:
(1) a 1/2" wide standard sharpening wheel (#27000)
(2) a standard buffing wheel (#25000)
- Available in 110-130 a.c., 60 cycle. Wattage 375. Can be set to run on 220-240 a.c.
U.S. Patent #4,528,778 Manufactured by Wolff Industries (model STD-TAS)
Wolff Industries, Inc. is the world’s largest manufacturer of industrial scissors sharpeners, professional scissors sharpeners, grooming and beauty shears sharpeners . Wolff Industries, Inc. specializes in stainless steel shears with edges sharper than can be obtained elsewhere. Wolff Industries, Inc. is the world’s largest manufacturer of industrial scissors sharpeners, professional scissors sharpeners, grooming and beauty shears sharpeners .
- Arms Fold Back Against Machine for Compact Storage.
- Fast and Easy Professional Scissors Sharpening.
- Recommended by Leading Scissors Manufacturers.
- 1/4 HP Ball Bearing Condenser Run Motor.
- Instructional Video Included
Recommended For:
Pet grooming shears, high quality fabric shears, low priced barber and beauty shears.
High or low volume scissors sharpening
Retail, home, or industrial use
Twice As Sharp® Scissors Sharpener
by Wolff Industries, Inc.
3 reviews
$471.98
SKU PRO-TAS
Twice As Sharp® Professional
Sharpening System
1
Quantity
Add to cart
Buy it now
Share this:
Share on Facebook Tweet on Twitter Share on LinkedIn Pin on Pinterest
Overview
The Twice as Sharp® Professional Scissors Sharpener is designed to make sharpening your customer's shears fast, easy, and precise. The professional system comes equipped with a 100 grit sharpening wheel so you can sharpen customer's shears quickly. A professional honing wheel is also included to highly polish your edge leaving a shiny cosmetic finish. The professional honing wheel is designed for pet grooming shears, high quality fabric shears, and low priced barber and beauty shears.
The Twice as Sharp® Professional Scissors Sharpener also comes fitted with an arm and clamp assembly that can be set to match all possible angles on any industrial scissors, grooming shear, or low-end beauty and barber shear up to 14 inches in length. This will allow you to confidently sharpen any shear to the exact angle best suited to your customer’s needs. If you ever have questions about angles or how to sharpen different styles of shears, the Professional Twice as Sharp® comes with an in-depth manual that lists many of the best angles for each different style. If you need more help, give us a call for additional support.
All of Wolff Industries’ scissors sharpeners come with a comprehensive training DVD that will walk you through the steps of sharpening numerous shears. This exhaustive training tool will teach you how to properly use your new sharpener and produce quality results every time!
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Technical Specifications:- Item Weight - 12 lbs
- Shipping Weight - 14 lbs
- Shipping - Boxed
- Package Dimensions - 11 x 10 x 10
- Power Source - Corded Electric
- Plug Type - 3 Pin Type B, 2 Pin
- Voltage - 110 V, 220 V
- Amperage - 1.3 A
- Wattage - 375
- Frequency - 60 Hz, 50 Hz
- Speed - 3450 rpm, 3000 rpm
- Phase - 1
- Horsepower - 1/4 hp
- Motor - condenser run, TENV 100% duty cycle
- Bearings - Precision double-sealed (SKF 6202-2RS1 or equivalent) ball bearings
- Wheel Diameter - 5 in
- Wheel Bore - 0.5 in
- Wheel Face - 0.5 in
- Standard Sharpening Wheel - 100 grit fine grain friable aluminum oxide
- Professional Honing Wheel - 600 grit cotton impregnated with fine silicon carbide
- Sharpening Angles - 0 to 55 degrees
- Clamp Opening - 0.6 in
- Arm Assembly - double sealed Rulon® bearings
Designed for the Professional Sharpener - Wollf's Professional Twice as Sharp is designed to make sharpening your customer's shears fast, easy and precise. The professional system comes equipped with a 100 grit sharpening wheel so you can sharpen the shears your customers entrusts to you quickly, and a 600 grit honing wheel designed to enhance the shear so it will cut twice as sharp as it did when it was brand new. It also comes fitted with an arm and clamp assembly that can bet set to match all possibe angles on any industrial grooming, or low-end beauty/barber shear up to 14 inches in length. This will allow you to confidently sharpen any shear to the exact angle best suited to your customer's needs. An in-depth manual is included if you have questions about angles or how to sharpen different styles of shears. All of Wollf's scissors sharpening systems come with a comprehensive training video that will walk you through the steps of sharpening numerous shears. This exhaustive training tool will teach you how to properly use your new sharpener and produce quality results every time! Includes: Motor; Arm; Clamp; Wheels; Safety Glasses; Dust Mask; Scissors Lubricant; Pink Hone; Wheel Dressing Brick; Eye Shields; Hex Wrench; Angle Gage; Instruction Manual; Training Video. Billable transportation charges for freight intensive items will be the greater of the dimensional weight compared to the actual weight. In addition to transportation charges, freight carriers may assess an additional oversize charge per package.
- 14" stroke without reclamping
- Weight: Unit only 12 pounds; Boxed 14 pounds.
- Voltage: 110-130 a.c., 60 cycle. Wattage 375, 3450 rpm can be set to run on 220-240 a.c. 50/60 cycle, 3000 rpm
- Motor: 1/4 H.P. condenser run. TENV 100% duty cycle
- Bearings: Precision ball bearings. Double sealed (SKF 6202-2RS1 or equivalent)
- Arms: Double sealed Rulon bearings, no maintenance required
- Sharpening Wheel: 5" x 1/2" x 1/2", 100 grit aluminum silicon carbide
- Buffing Wheel: Nylon impregnated with fine silicon carbide
- Sharpening Angles: 0 to 57
- Clamp Opening: .600"
- Special clamp position scissors for precise duplication of bevel.
- Sharpen curved blades and pinking shears easily.
- Lifetime sealed bearings provide years of maintenance free use.
- 1/4 Hp Ball Bearing, condenser runs motor at 3450 rpm.
Easy-to-read manual and video tape included.
See All Wolff Twice as Sharp Videos
Yamata DE8-10INCH Straight Knife Cutter 10" Replacement Blade for FY3
 |
Our Price: $9.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Ricoma iKonix KC-3 8" Blade Stand Up Straight Knife Cutting, Cutter Machine Blue (Replaces Ricoma CZD-3, Yamata FY-3)
 4028: Ricoma iKonix KC-3 8" Blade Stand Up Straight Knife Cutter Machine Blue (CZD3 FY3) |
Our Price: $469.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
8" STRAIGHT KNIFE CUTTING MACHINE,110V, 50/60Hz 550W
- Suitable for mass trimming cotton, woolen, linen leather and chemical fiber goods, etc.
- Neat cutting, small-curvature radius curvilinear cutting.
- Low noise, stable running, easy to operate and high efficiency.
- Incorporated with an auto knife-grinding device, easier to operate.
Please Note the blade length does not equal the amount of stacked material that can be cut. The cut depth will depend on the thickness, texture and density of the material you are using. If you are unsure if this cutter will suit your application please contact us to let us know the material that you are using, and we will be happy to offer our best recommendation
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Ricoma iKonix KC-3 6" Blade Stand Up Straight Knife Cutter Cutting Machine Blue (Replaces Yamata FY-3, Ricoma CZD-3)
40821: Ricoma iKonix KC-3 6" Blade Stand Up Straight Knife Cutter Machine Blue (Replaces Yamata FY-3, Ricoma |
Our Price: $429.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
6" STRAIGHT KNIFE CUTTING MACHINE,110V, 50/60Hz 500W
- Suitable for mass trimming cotton, woolen, linen leather and chemical fiber goods, etc.
- Neat cutting, small-curvature radius curvilinear cutting.
- Low noise, stable running, easy to operate and high efficiency.
- Incorporated with an auto knife-grinding device, easier to operate.
- 220/110 voltage
-
Please Note the blade length does not equal the amount of stacked material that can be cut. The cut depth will depend on the thickness, texture and density of the material you are using. If you are unsure if this cutter will suit your application please contact us to let us know the material that you are using, and we will be happy to offer our best recommendation
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Ricoma iKonix KC-3 10" Inch Blade Stand Up Straight Knife Cutter Cutting Machine Blue
40822: Ricoma iKonix KC-3 10" Inch Blade Stand Up Straight Knife Cutter Cutting Machine Blue |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
10" STRAIGHT KNIFE CUTTING MACHINE,110V, 50/60Hz 500W
- Suitable for mass trimming cotton, woolen, linen leather and chemical fiber goods, etc.
- Neat cutting, small-curvature radius curvilinear cutting.
- Low noise, stable running, easy to operate and high efficiency.
- Incorporated with an auto knife-grinding device, easier to operate.
How to adjust the Cutter Blade
Please Note the blade length does not equal the amount of stacked material that can be cut. The cut depth will depend on the thickness, texture and density of the material you are using. If you are unsure if this cutter will suit your application please contact us to let us know the material that you are using, and we will be happy to offer our best recommendation
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Yamata RF16 Replacement Blade for FY-35 Standup 3.5" Rotary Fabric Cutter Cutting Machines
 47309: Yamata RF16 Replacement Blade for FY-35 Standup 3.5" Rotary Fabric Cutter |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
RF16
Non-US Warranty: 30 days parts and labor.
Ricoma iKonix Yamata YCM-40-1 Standup Rotary 4 Inch Knife Blade Cloth Cutter Cutting Machine
 4040: Ricoma iKonix YCM-40 Standup Rotary 4" Knife Blade Cloth Cutter Cutting Machine |
Our Price: $169.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Suitable for trimming cotton, woolen, linen leather and chemical fiber goods, etc.
- Neat cutting, small-curvature radius curvilinear cutting.
- Low noise, stable running, easy to operate and high efficiency.
- Circular cutting blade
- Built-in sharpening mechanism
- Extra-thin base plate
- High-power electric motor
- Carbide-tipped counter blade
Best used for:
- Light to medium weight fabrics
- Woven or loosely knit fabric
Suitable for trimming:
• Cotton
• Wool
• Linen
• Leather
• Chemical fibre goods
Features:
• Neat cutting
• Small-curvature radius curvillinear cutting
• Low noise
• Stable running
• Easy to operate
• High efficiency
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Voltage: 1/110 VoltBlade Size: 4" (100 mm)
Cutting Capacity: 1" (25 mm)
Weight: 6.4lbs (2.9 kg)
Sharpening Mechanism: single stone (spring loaded)
Lubrication: Manual
Ricoma Yamata YCM-40BLADE Replacement 4" Round Rotary Knife Blade for YCM40 Stand Up Cutter
 |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
- For use with the Yamata YCM-40 Fabric and Cloth Cutter
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
KM KR-A Stand Up Rotary Cutter Cutting Machine 5-6" Round Knife Blade Cuts 3"
 |
Our Price: $2,299.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
The most advanced KR-A Round Knife Cutter with full Die-Cast housings gives you extra advantages with lighter, more accurate maneuverability and super sharp cutting performance.
FEATURES:
APPLICATIONS:
FEATURES:
- Precision design, machining and perfect quality control ensure good balance of work and improved safety to the operators.
- Lighter weight by adoption of Die-Cast housings allows even the inexperienced to produce great results.
- KM's modern techniques and know-how for manufacturing each part of the machine ensures longer life and uniformity of parts.
- The patented Automatic Knife Grinding System allows the quick and easy adjustment and replacement of the grinder.
- The specially treated High Speed Steel Knife and Grinding Stones are fitted precisely to provide excellent working conditions at all times.
APPLICATIONS:
- Cutting of Wool, Cotton, Knit, Felt, Tarpaulin, Canvas, Linen and Synthetic Fabrics and especially nice performance on Carpets.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
KM KR-A industrial round knife cloth cutting machine made in Japan.With a full die cast housing to reduce weight for easier operation and auto stone emery sharpener to get the most out of each blade.
The KRA is suitable to cut general cloth and textiles including woollens, cotton, knit, felt, waterproof cloth, canvas, linens, and various synthetic fabrics.
Available as 5" or 6" round blade models.
- *Blade Size / Cutting Capacity: 5" / 2.75", or 6" / 3.3"
- Weight: 8kg / 18lbs
- Voltage: 120V / 220V
- Output: 200W
KM Electric Cloth Cutting Machine KR-A
KM RS-100 OCTAgonal Knife Blade 4" Rotary Stand Up Cloth Cutter Cutting Machine RS100
 |
Our Price: $679.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
With its advanced technology and new systems, "OCTA" is a high performance Small Size Circular Knife Cutting Machine especially well-suited for thin fabrics and precise cuts. Fully Die-Cast with a simple design, "OCTA" is light in weight and promises to work with ease.
Lower Blade Mechanism and Octagon Shaped Circular Knife
"OCTA" gives you a really beautiful cut. In addition to the 4" 8-sided main blade, there is a spring-loaded, carbide tipped counter blade below. Together, the two blades cut cleanly while preventing material from clogging the knife or interfering with the mechanical parts.
Extra Thin Base Plate
An exclusive extra thin base plate guarantees precise and smooth cutting by preventing snags and bunching.
High Power Electric Motor
The high performance electric motor backed by KM's own technology dependably provides exceptional power. The air-guide system keeps the motor cool under use.
Automatic Knife Re-Sharpening System
Re-Sharpening of the Knife edge is automatic by pushing a spring loaded projection switch. The system is also designed for easy replacement of the grinding wheel.
Others
KM's exclusive technologies are shown and practiced in many other parts of the machine; Noiseless sound from precision machining. Using electrical parts that meet and pass European Safety standards. Built-in condenser prevents interference to radios and tvs.
Lower Blade Mechanism and Octagon Shaped Circular Knife
"OCTA" gives you a really beautiful cut. In addition to the 4" 8-sided main blade, there is a spring-loaded, carbide tipped counter blade below. Together, the two blades cut cleanly while preventing material from clogging the knife or interfering with the mechanical parts.
Extra Thin Base Plate
An exclusive extra thin base plate guarantees precise and smooth cutting by preventing snags and bunching.
High Power Electric Motor
The high performance electric motor backed by KM's own technology dependably provides exceptional power. The air-guide system keeps the motor cool under use.
Automatic Knife Re-Sharpening System
Re-Sharpening of the Knife edge is automatic by pushing a spring loaded projection switch. The system is also designed for easy replacement of the grinding wheel.
Others
KM's exclusive technologies are shown and practiced in many other parts of the machine; Noiseless sound from precision machining. Using electrical parts that meet and pass European Safety standards. Built-in condenser prevents interference to radios and tvs.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Knife Size: 100mm / 4in
- Knife Shape: Octagonal
- Cutting Capacity: 25mm / 1in
- Weight: 2.9kg / 6.5lbs
- Voltage: 110 Volt
- Output: 100W
Superior Hercules HRK-100 4" Blade, 3-Speed 110V Stand Up Rotary Fabric Cutting Machine
 Superior Hercules HRK-100 4" Blade, 3-Speed 110V Stand Up Rotary Fabric Cutting Machine |
Our Price: $169.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The HRK-100 is a 5-speed, 110 volt AC, electric rotary cloth cutting machine that cuts leather & multiple layers of fabric and cloth. It includes a 4" high-speed octagonal blade with built-in sharpening stone. The octagonal blade and carbide-tipped, spring loaded lower blade prevents the fabric from jamming. Best used for light to medium weight cloth and fabrics, woven or loosely knit fabric.
Non-US Warranty: 30 days parts and labor.
Specifications
- Cuts cotton, silk, synthetic fiber, leather and other materials, fabrics and cloth.
- Can cut through multiple layers of fabric
- Powerful but lightweight
- Octagonal blade allows for better operational control
- 3-speed servo motor
- Built-in sharpening stone
- LED worklight
- Durable, jam-free design
Wilson R10W26 Big-O 10" Round Knife Blade for Eastman Cutter, For Wolf model Big-O round-knife cutter 10"
 Wilson R10W26 Big-O 10" Round Knife Blade for Eastman Cutter, For Wolf model Big-O round-knife cutter 10" |
Our Price: $79.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For Wolf model Big-O round-knife cutter, 10"
Non-US Warranty: 30 days parts and labor.
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.