PROFESSIONAL IRON STATION
The all new 4000IS is the newest entry in our line-up of professional steam iron stations. The 4000IS establishes a new benchmark for features, ease of use, quality of components and value.
IT’S ALL ABOUT THE STEAM
The 4000IS excels at producing quality, dry, pressurized steam. Pressurized steam is the fastest and most efficient way of ironing. It allows the fibers of the fabric to be softened quicker, with the weight and heat of the iron laying the fibers down flat. This creates the crisp and clean finish demanded by professionals.
• Reset thermostat
• 4 safety systems
• Pressure Gauge
• Quick Release Fittings
• Silicone iron rest
• 10-15 minute heat up time
• Up to 4 hours of continuous ironing
Reliable 4000IS Product Brochure (.PDF)
Reliable Warranty Information Sheet(.PDF)
- US Warranty Lifetime Boiler Warranty
- Non-US Warranty: 30 days parts and labor
Water capacity: .66 U.S. gallons – 2.5 L
Operating pressure : 50 PSI – 3.44 bar
Boiler & iron elements: 1000W / 800W
Iron: i30 - 7' steam hose
Power consumption: 15 amps
Tank construction: Stainless steel
Low water indicator: Standard
Steam connector type: Direct - clamp type
Net weight: 15 lb – 6.8 kg (with iron)
Shipping weight: 17 lb – 7.7 kg
Product dimensions: 13" x 11" x 9"
Shipping dimensions: 15" x 12" x 12"
Electrical approval: cETLus
Country of origin: Italy
Warranty: Limited 1 year, Lifetime Tank
The 2100IR iron with 7' steam hose is lightweight (3.9 lb.), comfortable (cork handle) and uses the same high standard parts (thermal fuse, thermostat) that has made it the #1 choice of professionals.
The temperature regulator is set too low; increase the settings. You may have too much water in the tank. Try emptying some water out and try again.
What do I do when there is no steam from the iron?
The steam valve may be set too low or turned off. Open the steam valve (2) full complete turns. Solenoid in the boiler could be defective.
What do I do when the steam is leaking at the filler cap?
Replace the filler cap washer with a new one, put the new washer in the retaining ring and reinstall. If it is still leaking water, you will need to replace the filler cap.
How do I drain the water from the i500 boiler?
Unplug the boiler and wait until it’s cold (no steam pressure) Turn the filler counter clockwise and remove it slowly. Turn the boiler over and drain the water.
How often should I clean and flush the boiler?
The boiler should be cleaned once a week or as often as needed (depending on the water quality).
What is the pressure gauge setting?
Bundle & Save
Get additional savings when you purchase any of these items along with this product.
Reliable i30T 2000IA Non Stick Teflon Iron Shoe for 2100IR, 2150IR, 2200IR, 2250IR, 3000IS, i60/2300IR (+$22.00, You Save $27.99)