- It's bigger: The Innov-ís 4000D has the largest sewing arm space and embroidery hoop areas of any home machine available.
- It's faster: The Innov-ís 4000D allows you to sew or embroider fast-really fast-with a maximum of 1,000 stitches per minute.
- Revolutionary automatic needle-threading system.
- Built-in dual USB ports
- Thread trimming system clips threads between embroidery jump stitches and pulls thread tails out of the way.
- Extra-large embroidery area, nearly 12 inches x 7 inches (300 mm x 180 mm)
- Bigger, brighter LCD screen
- Increased lighting in the sewing and needle area
- Three-level presser foot height adjustment
- US Warranty 90 Days labor on defects in materials and workmanship.
- Non-US Warranty: 30 days parts and labor
Embroidery File Formats: .PES and .DST embroidery data files are compatible with this machine.
Other Included Accessories Cables, sewing notions, tools, instructions
NOTICE: NV40000D version 1.30 upate to your machine main PC Board to select the length of jump stitches from 5 to 50mm not to thread trim, is available at http://www.brother.com/E-ftp/Innov-is4000D/version.html
Regarding your problem with your new Innovis. It really is a wonderful machine, I also have one. Here are a few tips on making your experience with it enjoyable, these have worked for me. You will find it is very difficult to turn the handwheel if you have any thread jammed anywhere along the thread path, the tiniest little bit needs to be removed and your machine will be fine. Regarding the machine saying "check that the frame is secured" it will do that each time you start a design, it is a safety feature to remind you and you can just push your start button twice, this feature is not able to be turned off so just hit the start button twice as soon as you begin to embroider. Regarding the spare bobbin case, I have never had to use it even tho it was meant to be used with the prewound bobbins, the machine often runs better without switching the cases, if I am using the prewounds I will stick to the NEBS brand (I've been mostly winding my own because it winds a beautiful bobbin with the fine linerie/bobbin thread) as I have found that other brands will cause some problems even tho they say they are "the same as NEBS" On threads, I am using RA and it works great, I had a problem with Sulky but I think that is caused by the thread being very kinked by the small spool it is wound on, to thread Sulky with the automatic threader I will thread as usual but not cut the thread with the cutter I will leave a tiny maybe 1/8 inch piece past the cutter then hit the auto threading button and it threads fine. I hope this all helps you with your machine and if you need any more help please feel free to email me anytime. Mattie@Allbrands.com