Juki MO50E Seminar Serger 3-4 Thread Overlock, Lay In Tensions, Roll Hems (Same as MO51E) being replaced by MO-80CB

40470: Juki MO50E Demo Serger 3-4 Thread Overlock, Lay In Tensions, Roll Hems (Same as MO51E)

Our Price: $249.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Please contact us for availability. Condition: Seminar

Features

*"Juki MO50E online is exactly the same serger as the Juki MO51E dealer retail store model at $289 with the flower Logo on the front. John Douthat, AllBrands Owner & Tech

Save up to $160 more on purchase of Deluxe Carrying Case, 100 Organ Needles, 12 spools of serger thread 3000 yard cones, 3 to 10 year extended warranties. See all under Recommended Accessories below.

AllBrands is an Authorized Juki Dealer and Service Center for any repairs needed including warranty parts, electrical and labor. We give unlimited technical support by email, fax and phone. We service machines in our stores. Mass merchants do not have tech service or repair departments for your equipment. They are unable to help you directly, only referring any operational, mechanical or electronic questions back to the manufacturer instead of taking care of the problems themselves. Manufacturers and customers should expect that any problems you have will be taken care of by the dealer or merchant who sold you the equipment, not by just referring your questions back to the manufacturer.

• First Ever Basic Juki Serger with LAY IN TENSIONS!
  
• 1300 Stitches Per Minute
  
• Differential Feed
  
• Built-In Automatic Rolled Hemming
  
• Built-in Automatic Lower Lower Looper Threader
  
• Adjustable Cutting Width
  
• Adjustable Stitch Length
  
• ADjustable Differential Feed
  
• Serger Overlock Machine
  
• Removable Fabric Trim Waste Container
  
• DVD Video on How to Use
  
• No Fabric Pressure Adjustment Dial like Juki MO600 and MO700 Series.
  
  Click Here to View the Juki MO-50E Brochure(.PDF)
  
  MO-50E Overlocker Introduction Video
  
  
  Click HERE for You Tube Video on Serging Elastic on same Euro Pro EP534DX Serger
  
  Click here to access the Juki warranty registration form

Specifications

• Speed up to 1300 stitches per minute
  
• Differential feed easily adjustable while sewing, insures beautiful finished seams on all types of fabrics
  
• Built-in automatic lower looper threader
  
• Built-in roll hemming with fingertip controls
  
• Quick stitch width control allows many stitch formations
  
• Convenient foot-lifting handle
  
• Snap-on feet for easy foot changing
  
• Convenient waste fabric container collects fabric chips while you sew
  
• Chain cutter built-in for extra convenience
  
• Convenient light over the sewing area
  
• Electronic control insures full needle penetration power even at the lowest speeds
  
• On/off power switch for both motor and light
  
  

Juki MO80CB 2/3/4 Thread Freearm Overlock Serger, Lay In Tensions, Roll Hem, Diff Feed, Replaces MO50, MO51E, EuroPro EP534-546, Merrylock Made Taiwan

Juki MO-80CB Serger 2/3/4 Thread Overlock, Lay In Tensions, Automatic Rolled Hem

Our Price: $499.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box

Features

Specifications

• Sewing Speed: 1300 SPM
  
• Needle Type: ELx705 Size #14/90, #12/90
  
• Standard Overlock Width: Right Needle, 3mm-5mm; Left Needle, 3mm-7mm; Rolled Hem, 2mm
  
• Stitch Length: 1mm-5mm (standard: 2.5mm)
  
• Differential Feed: 0.6-N(1)-2.0
  
• Presser Foot Lift: 4mm
  
• Weight: 14 lbs.
  
• Dimensions: 12"(W) x 11"(D) x 12"(H)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  See All Videos on Juki MO-80CB Serger
  
  
  

Sew Steady SST Portable Sewing Machine Flatbed Extension Table 11.5" up to 24" Wide by 15" up to 32" Deep for Freearm or Flatbed Machines, 6 Sizes

3522: Sew Steady SST Portable Extension Table 11.5 to 24" Wide by 15 to 32" Deep. *Accessories (Spinner Tray and Sew Straight Guide) sold separately

Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Availability: Custom cut to fit your exact machine. Usually leaves the warehouse in 2-5 weeks Condition: New In Box

Features

Made in USA, Includes Acrylic Surround Freearm Platform and Adjustable Height Legs, Custom Fit Portable Freearm Extension for Flatbed Workspace Use, Order for your model Sewing, Embroidery, Quilting, Serger, and BlindStitch Portable Machines. Steady has the dimensional data on all brands and models of sewing machine free arms for custom cutouts on extension tables and cabinet inserts on their CNC laser cutting machines. If you need a non standard table or insert (no existing data available on machine or cabinet) please contact Sew Steady direct at SewSteady.com for a quote.

We do not keep stock on hand for any of our Tables or Inserts as they are all made to order.
The Table should be received in no more than 3 weeks from the day we receive the order. Sew Steady

"It is much better than the extension table that came with the sewing machine." Jimmy L, LA, CA.
"One of the best inventions since the automobile!" Cheryl H, McKenney VA
"Wow!! I absolutely love my new extension table! And if it weren't for me looking for a part i needed i would have never known it existed !! I stumbled on your site and so glad i did!! So Thank you so very much you guys, it fits like a glove!!! "

Please Note:*From 12" Wide to 32" Deep* covers all six available dimensions at increased prices. Does not mean that any dimensions between 12" Wide to 32" Deep is available. Please pick from the 6 sizes available at increasing prices. Accessories shown in picture (Spinner Tray and Sew Straight Guide) are optional and sold separately.

Includes:

• Acrylic Platform
  
• Adjustable Height Legs
  
• Custom Fit Portable Freearm Flatbed, for Sewing, Embroidery, Quilting, Serger and BlindStitch Portable Machines.
  
• 1 year warranty.
  
  Note: Custom Made to Fit Around the Freearm or Flatbed Surface of Your Brand and Model Sewing, Embroidery and Serger Machines. If your sewing machine drop in bobbin (top load) cover (applies to metal covers not to plastic covers) does not come straight up and off the needle plate (if it slides toward the operator) or if your bobbin case is underneath the top of the arm (front load), you will need to remove the extension table to replace a bobbin.
  
  Sew Steady Tables are Custom Made to Fit your Model Like a Glove! Do you really need or have the extra space for a full sized cabinet with drawers? Or just more working surface around your machine?
  
  The Sew Steady Portable Table extends the sewing surface area of your table top sewing machine. It supports fabric for even stitch quality. Tight fitting NO GAP design since tables are specific to machine model. It has easily adjustable snap-on-off legs for easy storage and travel.
  
  A flat sewing surface provides you with the most control when sewing. If you don't have your machine mounted in a cabinet, using a Sew Steady Portable Table is the next best thing. Take it to class so you have a flat surface there, too. Adjustable legs can be removed for transport and storage. Each table is custom cut from 1/4" Plexiglas to fit your particular machine.
  
  
• Extension Table For Sewing, Embroidery Or Quilting
  
• Available In Five Sizes!
  
• Junior, Serger, Large & Big Tables include a permanent inches and metric ruler printed on the underside of the table. Giant tables come with 2 cling rulers which adhere to the underside.
  
• Large, Big and Giant sizes also include a movable extra support leg
  
• Large table works with tiltables
  
• Rounded front edge for comfort
  
• Use it as a light box and easy underneath storage
  
• High Quality Acrylic Construction
  
• Specify To Fit Around Freearm Or Embroidery Unit
  
• The Sew Steady table is built-to-order to fit your specific machine. Please allow 2-5 weeks before shipping and expect a delivery time of 5-7 days. It is well worth the wait!
  
  Demonstration video, showing table leg installation process:
  
  
  
  Acrylic Table for Top Loading Bobbin Sewing Machine
  
  

Specifications

• Junior: 11.5" x 15" -- Sewing only. This Size is Not available for Singer 221 Featherweight, please choose 18x18 or above
  
• Small: 18" x 18" -- Sergers only
  
• Large: 18" x 24" -- Serger, Freearm or Embroidery
  
• Big: 24" x 24" -- Serger, Freearm or Embroidery
  
• Giant: 24" x 32" -- Serger, Freearm or Embroidery
  
• Freearm cutout fits around the freearm of your model machine for sewing and quilting.
  
• Can order a table without a cutout—specify "blank/no machine cutout" in the make/model section of this page.
  
• Embroidery cutout fits around your model embroidery unit for embroidery.
  
• The legs on all our Sew Steady Tables are inset from the perimeter by no less than 1”.
  
  SEW STEADY TABLE DESIGN STANDARDS:
  All of our tables are designed based on having the accessory tray removed from the machine. We position the machine to have the needle around 5”-7” from the front edge of the table. The table encompasses the entire freearm/flatbed sewing surface (does not wrap to the far-right of the machine). If your machine free arm slopes downward and has contours we may choose to design the table to hover over the slope to ensure a perfectly level, smooth sewing surface. If you have a top loading bobbin and a sloped machine this may affect your use. Please contact us in advance at SewSteady.com for other options. If you are purchasing a Deluxe Table then the holes do not need to be in line with the needle to make circles.
  
  Please indicate the Dimensions of the Sew Steady extension table in inches:
  
  Left to Right :________ Front to Back:_________
  
  Make of Machine: ______________ Model of Machine: _______________
  
  The standard position of the table placement front to back is to have the needle sit about 5-7” from the front of the table. Will this work for you? ___________
  
  (If no, please indicate in measurements of 1/16”-increments how far from the front of the table you wish to have the front of your skinny free-arm on your machine sit)
  
  The standard position of the table from right to left is to have the table wrap around the free arm of the machine only. Our goal is to give the sewer the most sewing space from the free arm to the left of the needle. Will this work for you? _____________
  
  (If no, please indicate in 1/16”-increments how much Table you’d like to the left of the left/tip of your free arm to the left edge of the table)
  The standard position of the table is to have the sewer positioned in front of the machine, with the needle at the left, the handwheel at the right. Will this work for you? ______________
  (If no, do you plan to sew using Free Motion Technique, which would prefer you to sew at the tip of the machine, changing the placement of the cutout to be on the wider end?)
  Our tables typically only wrap around the free arm of a machine, they do not typically wrap the full length to the right. Do you need your table to wrap as far to the right side of the machine as possible? __________
  The table is designed to never be resting on or touching the machine. You may have to adjust the levelers on the feet to make sure the table is perfectly level with the top of the free arm in order to sit as designed. The table is designed to fit around the free arm with the accessory tray always being removed. We do make some tables that work for Embroidery and Sergers. Please let us know if you are interested in these options. We are happy to accommodate other special requests as well with proper measurements and pictures if needed. Our goal is to get you the right table the first time. If you decide you do not like the placement requested the first time, there is a $50 fee for a 2nd revision

Sew Steady 12" LED Light Stick, You Can Use USB Plug In On Your Machine or Computer to Operate

80778: *Sew Steady 12" LED Light Stick, Can Use USB Plug In On Your Machine to Operate

Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box

Features

Specifications

Euro Pro EP203 Ham & Sleeve Attachment for EP1000, 1005 and 1010 Vacuum Ironing Board Tables

7056: Euro Pro EP203 Ham & Sleeve Attachment for EP1000, 1005 and 1010 Vacuum Ironing Board Tables

Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box

Features

Shark S3501 Lightweight Upright Pocket Steam Mop Cleaner, 180° Swivel

Our Price: $129.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box

Features

Specifications

AllBrands Repair Service Portable Sewing Serger Quilt Embroidery Machines Minimum Charge $199.99 Mech, $299.99 Electronic, $399.99 Ind/Comm+Parts/Ship

33263: AllBrands.com Repair Service

Availability: Advance Orders Only. Please review the product description for complete details. Condition: Retail

Features

Allbrands.com has over 70 years of combined factory-trained mechanics experience in servicing portable sewing, serger, quilting, and embroidery machines. We now have premium professional repair services available on your sewing machines in-store or by mail.

For Portable Mechanical Sewing Machines without any electronics on board Minimum $199.99 Charge +$25 for Return Ship +Parts and Installation Labor. Minimum $299.99 charge for Portable Computer, Embroidery or Serger machines. Minimum $399.99 plus Freight for Multi Needle, Industrial, or Longarm machine heads. (do not send stands)

We are the Sewing Machine Doctors with a motto of Fix it Right The First Time with a warranty of 30 days on mechanical and electronic adjustments, not recleaning.
.
We Service AllBrands of Portable Machines: Brother, Babylock, Bernina, Elna, Juki, Kenmore, Necchi, Riccar, Pfaff, Singer, Viking, White, Simplicity.

Your sewing machine is your baby. We want to help you ensure the best quality stitches on your sewing, quilting, embroidery, or serger machine, that are well adjusted and running smoothly!

Review our simple 3 step process below to get started! Or, Click HERE to Email Attn: [email protected] or general mailbox Attn: [email protected] if you have any questions or want to send pictures, prior to placing your order

Mail-in or Ship in Service Plan for all portable home sewing and embroidery machines. Here is how the program works.

*$199.99 +25.00 Return Shipping Cost if mail order: on Basic Mechanical Portable Sewing Machines.

*$299.99 +25.00 Return Shipping Cost if mail order: Computerized Sewing, Embroidery Machines,Sergers, Portable Blind Hem Machines.

*$399.99 +Pallatized Freight Return Shipping Cost if mail order: on Multi Needle Embroidery, Industrial Sewing Machine Heads, and Long Arm Quilting Machine heads.

Step 1. Purchase the 149.99 dollars minimum charge repair service above plus 25 dollars added for our prepaid and insured return shipping costs in USA 48 States. $100 Upcharge for Electronic, Embroidery or Serger. $200 upcharge for Mulit Needle, Industrial, or Longarm Quilting Machines. We will email you an Authorization Number to put on the outside of the box for easy identification.

Step 2. Ship your machine insured to Allbrands.com, Attn: Service Department, 20415 Highland Road, Baton Rouge, La. 70817. Pack in original carton with all styrofoam and double boxed, or wrap in 5" of heavy bubble wrap and double boxed. Include your foot control, bobbin case, bobbin, power cord, thread, needles and fabric samples, hooped fabric with stabilizer, copies of any prior repair tickets, printouts of our email communication, order confirmation, and any written documents regarding the sewing problems you are having with your machine.

Step 3. We will service and ship your repaired machine back pre-paid and insured. If mechanical adjustments or parts are needed, our mechanics will email or call you for approval of estimates above our minimum service charges. Our charges includes removing covers, cleaning, oiling, replacing covers, and balancing thread tension in sew off. Our average repair bill includes and average of 2 mechanical or electronic adjustments

If your machine cannot be repaired or you do not want to pay for any additional parts or installation required,
the 25 dollar prepaid shipping charge will be used to return your portable machine to you un-repaired.

Why do I need to have my sewing machine serviced?

There are many moving parts in a sewing machine and if it moves, it needs lubrication. These days many of the moving parts are housed with computer circuit boards and wires around them. Our Sewing machine technicians are factory trained to maintain and service computerized sewing machines.

For best performance and years of sewing, our technicians suggest you have your machine serviced annually. Below is our 24-Point Tune-Up Checklist and a list of Sewing Machine Performance Tips that our technicians suggest between services.

Sewing Machine Performance Tips:

Keep your machine covered when not using it. Household dust, lint and pet hair can enter your machine in one of it's many openings causing all types of problems.

Keep your machine away from direct sunlight, high/low temperatures and humidity.

Use the right needle for your project and change your needle every 3 to 4 hours of sewing or after every other project. The needle is the major culprit for most sewing problems.

Use good quality thread.

Use bobbins made specifically for your machine and make sure your bobbin thread is wound tight and no loose threads are hanging.

DO NOT SEW OVER PINS! Your needle may break, you could damage the hook or pieces of the needle could fly up into your face.

Do not use canned air on your machine or blow into your machine. The lint is just being pushed further into the machine and you are spraying moisture into your machine which can cause corrosion or damage your circuit boards

Clean the bobbin area frequently. Refer to manual for instructions.

Have a 24 Point Inspection completed, at a qualified repair center, on your sewing machine once a year to keep it performing like new for years to come.

Specifications

Bernina ACHINE MAINTENANCE FREQUENTLY ASKED QUESTIONS: CLEANING AND OILING


Bernina Users - THIS IS NOT LINT! ***DO NOT REMOVE***

Whitening Your Yellowed Vintage Sewing, Serger, Embroidery, Quilting and Knitting Machine Plastic ABS Parts! (RetroBrite) This is a video demonstrating how I have whitened some ABS plastic pieces of a vintage knitting machine that had become yellow with age and exposure to UV light. This is the RetroBrite procedure, which you may have seen being used on old video game consoles, sneakers, computers, and other older ABS plastic products. Works very well, is inexpensive, and really helps restore these old beauties to their former glory.

Machine Maintenance with Gary | Echidna Sewing