• Portable walking foot machine
  
• Straight stitch
  
• Complete with head mounted motor
  
• Like Thompson PW500

• Semi Industrial Sewing Machine with Upholstery capability. 800 SPM with attached motor included.
  
  
• Walking foot dual-feed capability built-in.
  
  
• Sews Heavy leather up to 1/4" thick, covers, sails.
  Upholsters furniture, tarps, tents, custains, cushions, quilts, dresses and much more.
  
  
• Great portability with handle accessory on top.
  
  
• Use Organ Size 22 Needles system 135x17, and #69 bonded nylon/polyester thread for sewing on exterior weight upholstery fabrics.
  
  
• The cases shown below as recommended accessories are a close fit because of the machine's motor. The case might bulge slightly, but it will close and snap shut.

• Semi Industrial Sewing Machine with Upholstery capability. Up to 800 SPM with attached motor included.
  
  
• Walking foot dual-feed walking foot capability built-in.
  
  
• Sews Heavy leather up to 1/4" thick, covers, sails.
  Upholsters furniture, tarps, tents, curtains, cushions, quilts, dresses and much more.
  
  
• Use Organ Size 22 Needles system 135x17, and #69 bonded nylon/polyester thread for sewing on exterior weight upholstery fabrics.
  
  Please Note: Machine will fit in this case bottom to operate, but case top does not fit tightly because of bigger motor pushing on the back wall of case. See PD60 P60214 Hard White Plastic Carry Case Standard 14.5x7" Flatbed, or Singer 16 5/8x7" Longer Bed Sewing Machines* Handle, Metal Latches, Kick Stand

• Single needle drop feed walking foot lockstitch machine with horizontal oscillating hook.
  
• Reverse stitching lever.
  
• Built-in 110vac motor, 150 watts, 1.5 amps.
  
• Link type thread take-up lever
  
• For sewing light to heavy-weight materials such as
  leather,vinyl,upholstery,synthetics,canvas and various coated and laminated products.
  
• High lift walking foot with 1/4" sewing clearance underneath the foot
  
• Sews Up To 1/4" Compressed Fabric
  
• 4 stitches per inch maximum stitch length
  
• Up To 800 Stitches Per Minute speed
  
• Dual Belts And Pulleys
  
• Cleated posi-traction belts combine with new geared hand wheel pulley, geared reduction pulley and geared motor pulley to eliminate slipping
  
• Special heavy duty motor attached up to 150 watts, 1.5 amps, twice as much as home sewing machines
  
• Top And Bottom Dual Feed
  
• Spring loaded reverse
  
• Fabric Presser Foot Pressure Adjustment
  
• All-Metal Construction
  
• Portable Walking Foot Sewing Machine
  
• Fits regular portable case or cabinets
  
• Uses standard upholstery needles: 135x17, size 22, 20, 18, etc.
  
  For sewing medium to heavy weight fabrics that are difficult to feed Elastic and other stretch materials, plus canvas, nylon, vinyl, leather, synthetics, and similar materials
  For stitching such products as boat and truck covers, tents, awnings, sails, parachutes, tarpaulins, wet suits, leather, shoes, boots and similar products
  
  
  
  
  Consew CP206R Review
  
  APPLICATIONS:
  For sewing light to heavy-weight materials such as leather, vinyl, upholstery, synthetics, canvas and various coated and laminated products.
  Designed for stitching such products as auto, boat and furniture upholstery, tarpaulins, covers, sails, tents, camping trailer covers, awnings, umbrellas, tops, bags, luggage, handbags, travelware accessories, sports and camping equipment, wearing apparel, outdoor clothing, canvas shoes, slippers, orthopedic appliances etc.
  
  FEATURES:
  Built-in 110vac Motor
  Link type thread take-up lever
  Foot Pedal & Carrying Case
  Hard plastic carrying case included (20.75" x 13.5" x 10")
  Deluxe Foot Control
  Table Extension

• Use Organ Size 22 Needles system 135x17, and #69 bonded nylon/polyester thread for sewing on exterior weight upholstery fabric
  
• Both zigzag and straight stitch can be operated in reverse with the lever on the right
  
• 150 Watt, 1.5 Amp, 110 Volt, 60 Cycle Motor, 800RPM
  
  
  Instruction Manual/Parts List (.PDF)
  
  Product Comparisons (.PDF)
  
  Frequently Asked Questions (.PDF)
  
  
  
  
  
  
  
  Read about an On The Water Review of portable Reliable Barracuda Walking Foot Sewing Machine
  
  Instructional Videos(links open in a new window):
  Inserting and threading a needle: video
  Adjusting thread tension: video
  Oiling instrctions (how often and where): video
  Bobbin winding: video
  Adjusting stitch length: video
  Changing stitch direction: video
  Adjusting zig-zag stitch width: video
  Adjusting bobbin tension: video
  Troubleshooting problems when the machine is not stitching or pulling up the bobbin thread: video
  
  

  Barracuda 200ZW v. Sailrite LSZ1 by Jill Schinas, published in June 2018, YachtMollyMawk.com

• Use Organ Size 22 Needles system 135x17, and #69 bonded nylon/polyester thread for sewing on exterior weight upholstery fabric
  
• Both zigzag and straight stitch can be operated in reverse with the lever on the right
  
• 150 Watt, 1.5 Amp, 110 Volt, 60 Cycle Motor, 800RPM
  
  Instruction Manual/Parts List (.PDF)
  
  Product Comparisons (.PDF)
  
  Frequently Asked Questions (.PDF)
  
  Reliable Warranty Information (.PDF)
  
  
  
  
  
  
  
  
  
  
  Read about an On The Water Review of portable Reliable Barracuda Walking Foot Sewing Machine
  
  

  Barracuda 200ZW v. Sailrite LSZ1 by Jill Schinas, published in June 2018, YachtMollyMawk.com

• 135x17 type needles have a round top (no flat side) for industrial upholstery and walking foot machines.
  
  Less Thread Breakage, Less Sticking, Less Downtime.
  The CS Cool-Sew finish on the needle surfaces and in the needle’s eye is resistant to sticking. Its finish has a very low friction coefficient, which prevents excessive heat buildup and resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles. Cool-Sew needles are ideal for stitching through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads. When Cool-Sew needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity.
  
  Regular needles show buildup of sticking fibers while Cool-Sew needle is free of buildup.
  
  As synthetic threads pass through the eye of a needle, they create friction and heat which may melt or snap threads. In some cases, the eye of the needle may be cut. The COOLSEW finished needle eye acts as if eye is lubricated and thereby alleviates the aforementioned problems. As an ordinary chromium plated needle penetrates through synthetic materials, the materials may stick to the needle. This may cause some of the synthetic materials to pass through the needle holes and create undesirable finishes. The sticking to the surface of the needle may also create heat-buildup problems such as melting and machine jamups. The COOL-SEW finish on the needle helps alleviate the sticking and heat-buildup problems.

Assembly Information Packet

• 20" x 48" table top
  
• Heavy-duty K-legs
  
• Rubberized feet
  
• Drawer
  
• Unassembled
  
  NOTE This table is manufactured specifically for the Reliable Barracuda Machine, If you have a machine other than the Reliable Barracuda, please measure your machine base, and contact us at 866-255-2726, to verify that it will fit your machine before purchasing

• Index stitching a half stitch at a time
  
• Safety clutch
  
• Synchronizer needle up or down
  
• Direct drive motor
  
• Includes Uberlight Flex LED light
  
• Built-in bobbin
  
• Superior stand
  
  Quality You Can Count On
  For heavier work, the most common type of sewing machine is the single needle, walking foot (compound feed) lockstitch machine. Top and bottom feed, and a higher foot lift allows the 4020SW to sew from medium to heavy weight fabric.
  
  Direct-Drive Motor
  Tired of replacing belts? Loud operation? The 4020SW features a built-in direct drive servo motor that harnesses our latest technology. This motor allows for quieter and smoother operation with no belts!
  
  A Half Stitch At A Time
  With a simple press of a button, the 4020SW allows for index stitching. Perform a simple half stitch for precision stitch control.
  
  Needle Up Or Needle Down
  Are you tired of stopping your work to move the handwheel? The 4020SW includes a programmable needle positioner to stop the needle in the up or down position. This eliminates the need to pause your work and turn the handwheel.
  
  Side Load Bobbin
  The 4020SW’s vertical hook allows for a side load for a smoother, more efficient sewing experience.
  
  Built-In Bobbin Winder
  For added convenience, the bobbin winder on the 4020SW is built into the front of the machine head.
  
  Uberlight Flex LED Light
  The perfect add on light is included at no extra charge for the 4020SW making it both, a great sewing machine, and a great value.
  
  Superior Stand
  Competitors typically choose to cut corners when it comes to the stand components - we don’t. We use only 100% plywood in our tabletops (not cheap particle board) and our legs are made from heavy-duty 3/32" steel.
  
  Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
  
  Ships LTL ground freight only. No expedited methods.

• Index stitching a half stitch at a time
  
• Safety clutch
  
• Synchronizer needle up or down
  
• Direct drive motor
  
• Includes Uberlight Flex LED light
  
• Built-in bobbin
  
• Superior stand
  
  Quality You Can Count On
  For heavier work, the most common type of sewing machine is the single needle, walking foot (compound feed) lockstitch machine. Top and bottom feed, and a higher foot lift allows the 4020SW to sew from medium to heavy weight fabric.
  
  Optional Roll Guide
  A perfect straight edge is a good thing. The 4020SW is also available with ⅜” roll guide to help create the perfect straight stitch at additional cost.
  
  Direct-Drive Motor
  Tired of replacing belts? Loud operation? The 4020SW features a built-in direct drive servo motor that harnesses our latest technology. This motor allows for quieter and smoother operation with no belts!
  
  A Half Stitch At A Time
  With a simple press of a button, the 4020SW allows for index stitching. Perform a simple half stitch for precision stitch control.
  
  Needle Up Or Needle Down
  Are you tired of stopping your work to move the handwheel? The 4020SW includes a programmable needle positioner to stop the needle in the up or down position. This eliminates the need to pause your work and turn the handwheel.
  
  Side Load Bobbin
  The 4020SW’s vertical hook allows for a side load for a smoother, more efficient sewing experience.
  
  Built-In Bobbin Winder
  For added convenience, the bobbin winder on the 4020SW is built into the front of the machine head.
  
  Uberlight Flex LED Light
  The perfect add on light is included at no extra charge for the 4020SW making it both, a great sewing machine, and a great value.
  
  Superior Stand
  Competitors typically choose to cut corners when it comes to the stand components - we don’t. We use only 100% plywood in our tabletops (not cheap particle board) and our legs are made from heavy-duty 3/32" steel.
  
  Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
  
  Ships LTL ground freight only. No expedited methods.

• Made From Very Durable Vinyl Covered Plywood
  
• Case Features Hand Holds In Each End and 4 latches
  
• Bumpers On Each Corner
  
• Inside Cushioning So That The Machine Can Be Stored In Any Position
  
• 20x13" dimensions
  
  The Cuda Carrying Case turns your Barracuda 2000U-33 into a portable working station.

• Right Hand Outside Zipper Foot for portable walking foot machines.
  
• For zigzag models requires changing inside foot with straight stitch foot .

• Compatible with portable walking foot sewing machines with dual belt speed reduction.
  Cannot be used on home sewing machine single belt systems and no speed reducer.
  
  *Consew CP206R Sewing Machine
  *Thompson PW500/PWZ500 Walking Foot Industrial Sewing Machine.
  *Sailrite LSZ-1 ZIGZAG Walking Foot Portable Metal Sewing Machine.
  *Alphasew PW200-SS Portable Walking Foot FlatBed
  *Alphasew PW200 Portable Walking Foot Flat Bed
  *AlphaSew PW400 Portable Walking Foot Flat Bed
  *Reliable 200ZW Portable Walking Foot & Zig-Zag Sewing Machine.
  *Mercury M-520 Portable Walking Foot Straight Stitch Machine

• With Cuda Crank your machine will penetrate up to 10 or more layers of heavy canvas or up to 8 layers of Sunbrella-Plus (top ot the line fabric for boats)
  
  
  
  Video Instruction for Installing Cuda Crank and Adjusting Tension on Belts with Idler Pulley in between handwheel and motor pulley