*Remove the plastic insert on the right to make space for longer bed 16 5/8" x 7" Singer Class 15, 15-66, 15-88, 15-89, 15-90, 15-91, 15-99 (this not Singer 99K), 201, 301, Slant O Matic 401 401A 403 403A 404, 500 500A 503 503A , or Touch & Sew 600 to 649, 700 to 758 sewing machines. This case has a removable insert to the right that will accommodate these longer bed Singer sewing machines.

*Note: Longer bed Singer, Touch & Sew, etc. machines require removal of the plastic insert shown, but you lose the notions storage area to the right for these longer bed machines. To determine fit, measure the bed of your machine. If it is approximately 7" x 16 5/8" and the hinge holes along the back side are spaced about 9 3/4" center to center, then it will fit this case. Fits all Japanese and Taiwanese Flat Beds & All Singer Long Bed Sewing Machines.

*Note: Kick Stand prevents the case from turning over when lifting the machine back on it's hinges for inspection, cleaning or lubrication.

*Note. The gap between two pins to hold a machine onto a flatbed cabinet or carrying case is 9 9/16" inches or 24.3cm from center of left hinge pin hole to center of right hinge pin hole.

• Hard White Plastic Case is sturdier than traditional wood flatbed cases, or plastic cases with plastic latches.
  
  
• Does not fit old square corner flatbed, all metal Sears Kenmore, White Rotary, Westinghouse or Domestic sewing machines from 1940's to 1970's that had off standard distance between hinge pins sockets on back of machines.
  
  Please Note: Case bottom can be used with 16.5x7" flatbed, longer 9" arm space right of needle, portable walking foot sewing machines: Alphasew PW400 and Yamata FS388 on AllBrands.com
  
  
• State of the art design: Sharp looking, rich beige color
  
• Buckle hook: Enforcement design, It wont break.
  
• Comfortable handle: One Piece, easy to grip, durable, will handle heavy machines
  
• Closed Base: No holes on the bottom, never worry about leaks
  `Machine Sitting Cushion, to reduce vibration

Non-US Warranty: 30 days parts and labor.

This Universal Flatbed Sewing Machine Carrying Case is made specifically for your standard flatbed sewing machine. Most manufactures use a standard width on the hinges for all flatbed sewing machine carrying cases. The Univeral Flatbed Sewing Machine Carrying Case is made out of sturdy plastic to protect your machine.

Fits the Alphasew PW200 Machine, and most other standard Japanese and Taiwanese flat bed sewing macines

CAPACITY: (L) 14.5” X (W) 7” X (D) 2 3/4”

Please Measure your Machine to ensure fit

Non-US Warranty: 30 days parts and labor.

The 200ZWCUDACASEs are on Backorder until the end of May.


Includes two Pin Hinges at back of opening for Attachment to machine. No motor is included for portable operation, unless a motor is already mounted on your machine. Extra clearance between hinges and back of case for bigger motors on portable walking foot sewing machines. See Below

• Made From Very Durable Vinyl Covered Plywood
  
• Case Features Hand Holds In Each End and 4 latches
  
• Bumpers On Each Corner
  
• Inside Cushioning So That The Machine Can Be Stored In Any Position
  
• 20x13" dimensions
  
  The Cuda Carrying Case turns your Barracuda 2000U-33 into a portable working station.

Non-US Warranty: 30 days parts and labor.