The Sew Steady Portable Table extends the sewing surface area of your table top sewing machine. It supports fabric for even stitch quality. Tight fitting NO GAP design since tables are specific to machine model. It has easily adjustable snap-on-off legs for easy storage and travel.
A flat sewing surface provides you with the most control when sewing. If you don't have your machine mounted in a cabinet, using a Sew Steady Portable Table is the next best thing. Take it to class so you have a flat surface there, too. Adjustable legs can be removed for transport and storage. Each table is custom cut from 1/4" Plexiglas to fit your particular machine.
- Extension Table For Sewing, Embroidery Or Quilting
- Available In Five Sizes!
- Junior, Serger, Large & Big Tables include a permanent inches and metric ruler printed on the underside of the table. Giant tables come with 2 cling rulers which adhere to the underside.
- Large, Big and Giant sizes also include a movable extra support leg
- Large table works with tiltables
- Rounded front edge for comfort
- Use it as a light box and easy underneath storage
- High Quality Acrylic Construction
- Specify To Fit Around Freearm Or Embroidery Unit
- The Sew Steady table is built-to-order to fit your specific machine. Please allow 2-5 weeks before shipping and expect a delivery time of 5-7 days. It is well worth the wait!
Sew Steady Cabinet Inserts are designed to fit your specific make and model of freearm sewing machine and cabinet. The Insert fills the gap between the sewing machine and the opening of the cabinet to create a flat working surface*. Made with one of the highest grades of acrylic.
Please be careful when determining the make and model of your cabinet. It is vital to ensure the proper size insert is selected since this product is made-to-order and non-returnable. If you are unsure of the make or model, have a custom cabinet or one that is not listed, or desire a bespoke design, we will work with you to determine the right product. Please see the Frequently Asked Questions(FAQ) section below for more information.
*Please Note: Inserts are made for your machine and the width of the opening of the cabinet or table. Depending on the size of your sewing machine compared to the opening of the cabinet or table, the insert may not extend all the way around machine as shown. Machines must be smaller than the cabinet opening by a minimum 3" in depth at widest part(front to back) and 2" in length (left to right) for insert to wrap completely around machine as shown in picture.
If the machine is wider or longer than these minimums we may still be able to make a Filler piece to help fill gaps and still create a smooth sewing surface. Our standard Insert design allows for approximately 1-1/2” – 2” on the right for clearance for the cords and handwheel, when space permits.
LIP -Inserts have a lip to catch on the cabinet top - this is when the cabinet opening has no method to support the insert.
NO LIP - Inserts sit flush inside the cabinet opening & rest on a ledge built within the cabinet.
- US Warranty 30 days replacement if defective.
- Non-US Warranty: 30 days parts and labor
- Junior: 11.5" x 15" -- Sewing only. This Size is Not available for Singer 221 Featherweight, please choose 18x18 or above
- Small: 18" x 18" -- Serger only
- Large: 18" x 24" -- Serger, Freearm or Embroidery
- Big: 24" x 24" -- Serger, Freearm or Embroidery
- Giant: 24" x 32" -- Serger, Freearm or Embroidery
- Freearm cutout fits around the freearm of the machine for sewing and quilting.
- Embroidery cutout fits around the embroidery unit for embroidery.
SEW STEADY TABLE DESIGN STANDARDS:
All of our tables are designed based on having the accessory tray removed from the machine. We position the machine to have the needle around 5”-7” from the front edge of the table. The table encompasses the entire freearm/flatbed sewing surface (does not wrap to the far-right of the machine). If your machine free arm slopes downward and has contours we may choose to design the table to hover over the slope to ensure a perfectly level, smooth sewing surface. If you have a top loading bobbin and a sloped machine this may affect your use. Please contact us in advance for other options. If you are purchasing a Deluxe Table then the holes do not need to be in line with the needle to make circles.
Please indicate the Dimensions of the Sew Steady extension table in inches:
Left to Right :________ Front to Back:_________
Make of Machine: ______________ Model of Machine: _______________
The standard position of the table placement front to back is to have the needle sit about 5-7” from the front of the table. Will this work for you? ___________
(If no, please indicate in measurements of 1/16”-increments how far from the front of the table you wish to have the front of your skinny free-arm on your machine sit)
The standard position of the table from right to left is to have the table wrap around the free arm of the machine only. Our goal is to give the sewer the most sewing space from the free arm to the left of the needle. Will this work for you? _____________
(If no, please indicate in 1/16”-increments how much Table you’d like to the left of the left/tip of your free arm to the left edge of the table)
The standard position of the table is to have the sewer positioned in front of the machine, with the needle at the left, the handwheel at the right. Will this work for you? ______________
(If no, do you plan to sew using Free Motion Technique, which would prefer you to sew at the tip of the machine, changing the placement of the cutout to be on the wider end?)
Our tables typically only wrap around the free arm of a machine, they do not typically wrap the full length to the right. Do you need your table to wrap as far to the right side of the machine as possible? __________
The table is designed to never be resting on or touching the machine. You may have to adjust the levelers on the feet to make sure the table is perfectly level with the top of the free arm in order to sit as designed. The table is designed to fit snuggly around the free arm with the accessory tray always being removed. We do make some tables that work for Embroidery and Sergers. Please let us know if you are interested in these options. We are happy to accommodate other special requests as well with proper measurements and pictures if needed. Our goal is to get you the right table the first time. If you decide you do not like the placement requested the first time, there is a $50 fee for a 2nd revision
1) Basic Extension Table Available in 6 Sizes
2) Deluxe Table Available in Large
Cling Centering Ruler
Circles Sewing Kit
3) Wish Table Package Available in 1 Size
Large Drawer Tray
4) Ultimate Table Package Available in Large or Big
Universal Sew Straight Guide
5) Deluxe-Ultimate Table Package Available in Large or Big
Includes (Both the Ultimate and Deluxe items combined except the Spinner Tray)
Cling Centering Ruler
Circles Sewing Kit
Universal Sew Straight Guide
We understand that you may not know this information off-hand or at the time of purchase. In the Cabinet opening dimensions drop-down, select “Unknown” and the manufacturer will contact you in order to work through selecting the right product.
I don’t know what Brand or Model cabinet I own, what do I do?
If you don’t know the brand, choose “Unknown/Custom” from the Cabinet Brand drop-down. If you don’t know the model, write “Unknown” in the Cabinet Model box. The manufacturer will contact you in order to work through selecting the right product.
My cabinet is custom built / not listed in the options
You have two options here.
1st option: Choose an existing design and modify your cabinet to fit the insert.
This is the cheapest solution because it requires no additional tooling adjustments from the manufacturer, but will possibly require more work on your end to ensure proper fit with your furniture. If you choose this method, pick an existing dimension from the Cabinet Opening Dimensions drop-down box, select “Unknown/Custom” in the Cabinet Brand option drop-down and write “Will adjust to fit” in the Cabinet Model box.
2nd option: Have a custom insert designed to fit your exact machine and cabinet.
This is the easiest solution and is ideal if you can’t or won’t make alterations to your furniture. However, because this requires tooling adjustments by the manufacturer, there is an additional fee on top of the price of the table itself. For example: if you wanted an insert that measures 12-7/8” x 24”, a size not currently offered, you would pay for the price of a medium size insert and then an additional customization fee. Please see the option list for the current custom design fee. If you choose this method, pick “Custom” from the Cabinet opening dimensions drop-down box, select “Unknown/Custom” in the Cabinet Brand option drop-down. The manufacturer will contact you to finalize the details of your order. Please note that the price of the table is variable depending on what exact measurements you require. There is a possibility your dimensions could bump you into a higher or lower price tier than you expect. Adjustments to price, if applicable, will be worked out with you before construction begins.
Got this for my mom's sewing machine and she loves it! Stable, large with a 16" ruler embedded, and it fits perfectly as well.