 |
October 31, 2024 |
Kai Scissor N5135C 5 1/2'' Sewing Scissors, Embroidery and Thread Trimmers, Made in Japan
 56562: Kai Scissor N5135C 5 1/2'' Curved Blade Sewing Scissors, Thread Trimmer |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Retail Store Only Condition: New In Box |
Features
This is the Kai 5135c: 5 and 1/2 in scissors. The blades are perfect for close cuts, trapunto, cutwork, machine appliqué, rug hooking and cutting away stabilizers.
Non-US Warranty: 30 days parts and labor.
Consew 818DS Dual Speed Straight Knife Fabric Cutter, with 6, 8 or 10" Blade Cutting Machine, Built In Sharpener, Auto Oil, Made in Japan
 Consew 818DS Dual Speed Straight Knife Fabric Cutter, 6, 8 or 10" Blade |
Our Price: $2,599.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Automatic Oil Lubrication Device
- Advanced Motor assures smooth cutting and low motor temperature.
- Automatic Sharpening Device
- Thinner and flat type Standard reduces resistance
- Low, smooth base plate is low for smooth material movement
- Fan-guard and starting switch cover are designed for safety
Please Note the blade length does not equal the amount of stacked material that can be cut. The cut depth will depend on the thickness, texture and density of the material you are using. If you are unsure if this cutter will suit your application please contact us to let us know the material that you are using, and we will be happy to offer our best recommendation. For garment fabric layers, the cutting depth is about 2/3 of blade length. For heavier fabrics, the ratio can go down to 50% of blade length.
Available in a 220V by request.
Non-US Warranty: 30 days parts and labor.
Elize EP-80V Violet Air or Felt Tip Erasable Pen Marker +EP-90E Eraser*
 |
Our Price: $0.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
- Violet Color will gradually disappear in approximately 1-3 Days.
- The speed of disappearing the ink color is depending on material, humidity and condition of temperature.
- Test those markers of the waste piece from cutting cloth before actual using.
- Or the eraser is available separately for immediate removal of marks
- Pin point tip produces fine, thin line that vanishes without washing.
- Marks completely disappear from your project by way of air oxidation—no additional erasing required
- Marking Pens are the perfect accessory for marking on cloth for all your sewing and crafting needs.
- Always test mark pen on exact fabrics
- Note: Do not iron over marks or launder item before color vanishes
Non-US Warranty: 30 days parts and labor.
Specifications
- Polyester fiber fine tip (1.0mm)
- Ink color : Pink
- Barrel diameter 8.0mm
Elize EP-90E Felt Tip Eraser for Erasable Marker Marker Pens + Elize EP-80V Violet Air or Felt Tip Erasable Pen Marker
 40009: Elize EP-90E Felt Tip Eraser for Erasable Marker Marker Pens + Elize EP-80V |
Our Price: $0.49 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Elna Xquisit II 9020 Demo 32 Stitch Sewing & 6x10 Embroidery Machine EMD Format, Self Winding Bobbin, 100+Designs, 11 Fonts 5 Sizes from 7-25mm Height
 11480: Elna Xquisit II 9020 Demo Sewing & 6x10" Embroidery Machine .EMD Format |
Our Price: $1,999.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 3-4 business days. Condition: RB Refurbished |
Features
*5 Extras! Thread Color Conversion Software, 21 Exquisite plus 21 OESD Stabilizer Samples and DVD, Designs in Machine Embroidery Magazine Offer, Embroiderers Compass Guide.
As you've experienced, sewing renews your spirit and lets you express yourself in many ways, whether it's embroidery, wearable art, quilting, couture, bridal, heirloom, western wear, carnival, home decor. Just start with a length of fabric or purchase something and add your own special touch.
Let your creativity take over; the machine will do the rest. Totally automated threading, automatic bobbin winding, hoop sensors, hint messages, plan-ahead thread color organizer, updatable software - these are just a few of the numerous benefits you'll realize when you choose Elna. In a world filled with choices when it comes to sewing and embroidery, there's only one choice - the Elna Xquisit II..
What a wide array of stitches you'll find on this machine - straight, zigzag, buttonholes, specialty quilting and heirloom, satin, floral, cross, directional feed designs. 320 stitches in all, all organized into groups for your convenience.
- Fully automated threading - from spool through needle eye
- Full-color LCD screen
- Updatability via www.elna.com
- On-screen instruction manual
- Hint messages
- Personalized machine function settings
- Adjustable sewing speed up to 850 spm
- Multiple languages
- Automatic thread tension - computer system automatically releases correct thread amount for ultimage stitch performance
- Needle thread and bobbin thread sensors
- Presser foot lever sensor
- Automatic thread cutter key - programmable
- Start/stop key - for embroidery and traditional sewing
- Up/down needle key
- Dual lights - eliminate shadows
- Extra presser foot lift
Embroidery Features:
- Fully automated bobbin winding - free embroidery bobbin thread spool included
- Extra large embroidery area (24 x 14 cm / 9 ½" x 5 ½")
- Feed dog automatically lowers when embroidery unit is attached
- Multiple hooping – plots points on-screen for alignment of 2 or more large hoopings
- Wide array of built-in designs including Continuous Hoop designs
- On-screen layout, alignment grid turns on and off
- 6 alphabets – resize in 1 mm increments
- Rotate (in 1° increments), mirror image, change size and spacing
- Easy embroidery editing
- 32 permanent memories – up to 120 characters and letters in each
- Temporary embroidery memory restarts where left off
- Power failure function for embroidery
- Hoop detector
Traditional Sewing Features:
- 320+ stitches, including 12 buttonholes
- Choice heirloom and quilt stitches
- Directional feed patterns – larger than 7 mm with no hoop
- Directional sewing – forward, backward, left, right without pivoting
- 5 alphabets, 7 mm – 25 mm
- Lockstitch – programmable
- Maximum stitch width 7 mm
- Maximum stitch length 5 mm (basting – 20 mm)
- Elongation – satin stitches up to 5 times original length
- Combine stitches from different groups
- 2 color – certain stitches alternate needle and bobbin threads on right side of fabric
- Size – change from small to medium to large
- Mirror image and face to face
- Cascade – 6 choices arrange stitches in steps rather than in a straight line
- Direct editing – edit any stitch within a sequence
- Grid
- 20 permanent memories – up to 120 characters and letters in each
- Strong needle penetration on all fabrics
- Free arm
- Adjustable foot pressure
- Knee lifter
Storage and Accessories:
Three convenient storage areas accommodate presser feet, bobbins, needles, screwdriver, quilt guide. lint brush, seam ripper, eyelet punch, scissors, tweezers, fabric marker and more.
In a world filled with choices when it comes to sewing and embroidery, there's only one choice - the Elna Xquisit II.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Note: Most of the electronics for this model are no longer available, including the mother board and DC motor, however we still do service them for regular tune up, general service.TECHNICAL FEATURES:
- Fully automated threading - from spool through needle eye
- Full-color LCD screen
- On-screen instruction manual
- Hint messages
- Personalized machine function settings
- Adjustable sewing speed up to 850 spm
- Multiple languages
- Automatic thread tension - computer system automatically releases correct thread amount for ultimage stitch performance
- Needle thread and bobbin thread sensors
- Presser foot lever sensor
- Automatic thread cutter key - programmable
- Start/stop key - for embroidery and traditional sewing
- Up/down needle key
- Dual lights - eliminate shadows
- Extra presser foot lift
Warranty
AllBrands.com offers a 90 Day labor on defects in materials and workmanship. This item is not covered under Elna's Manufacturer warranty.
Hashima HI-350PS Professional Gravity Feed Steam Iron 1200W, Japan, 5Lb, Electronic Thermostat, CleanOut Ports, Water Bottle, Demineralizer, Iron Rest
 Hashima HI-350PS Professional Gravity Feed Steam Iron, 110V |
Our Price: $699.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models. Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.
Note: 220V is special order from Japan and takes 60-90 days to arrive in USA before shipping.
A new and exciting steam iron which meets the demands of the twenty first century. Very fashionable steam iron which is proud of its novel mechanism designed, and assures high working efficiency.
This iron has been developed with easy of use in mind.
The temperature can be easily controlled using the thermistor and electric thermostat.
The iron is made from light materials so the user does not become tired.
Strong steam output is another of this machine’s special features.
As the steam chamber is completely sealed, and the main switch and thermostat are not on the actual iron, durability is insured.
The bottom of the water bottle has a round mesh filter (in red color)to keep the demineralizer granules from passing through the water valve, hose, solenoid and iron steam chamber.
Note: 220V is special order from Japan and takes 60-90 days to arrive in USA before shipping.
A new and exciting steam iron which meets the demands of the twenty first century. Very fashionable steam iron which is proud of its novel mechanism designed, and assures high working efficiency.
This iron has been developed with easy of use in mind.
The temperature can be easily controlled using the thermistor and electric thermostat.
The iron is made from light materials so the user does not become tired.
Strong steam output is another of this machine’s special features.
As the steam chamber is completely sealed, and the main switch and thermostat are not on the actual iron, durability is insured.
The bottom of the water bottle has a round mesh filter (in red color)to keep the demineralizer granules from passing through the water valve, hose, solenoid and iron steam chamber.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Electric Capacity: AC 120V - 1,200 WDimensions: Depth: 240mm, Width 105mm, Height 135mm
Net Weight: 4 lbs.
Water Tank: 3.0
How to Use a Gravity Feed Iron
What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor
steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com
steam generator or gravity-feed iron on PatternReview.com
Gravity Feed Irons by NancyKsews.com
Cool Tool: Gravity Feed Iron in ThreadsMagazine.com
Hashima HW-40C-HAS 4-Thread Commercial Cone Unwinder and Spool Winder
 21526: Hashima HW-40C-HAS 4-Thread Commercial Cone Unwinder and Spool Winder |
Our Price: $999.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: OUT OF STOCK Condition: New In Box |
Features
- One action type bobbin stopper
- Easy adjustment of the thread-winding volume of thread is controlled by a timer
- Small size and light weight
- The intermittent switch allows simple winding start setting
- High-speed four bobbins winding assures the prompt, Convention of a large volume of thread to bobbins
HASHIMA HW-40C Winding Video
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Brochure on Models of Hashima High Speed Winders available from the factoryInstruction Manual on HW-40 Hashima High Speed Winder available in the USA
-
Model: HW-40C
-
Power: Single phase
-
Output: 80W
-
Timer: 15min
-
Speed: 1,380r.p.m
-
Traverse: 97mm
-
Dimensions: 490(D)×660(W)×950(H)mm
-
Weight (approx.): 25kg (55 lbs)
-
Voltage: 110V
HASHIMA USED TO PREPARE SPECIAL SPECIFICATION HW-40 WITH 2.5 INCH CONE FOR USA CUSTOMER. NOW, DUE TO VERY LIMITED DEMAND FOR THE SPECIFICATION, HASHIMA PREPARE ONLY 1 SPECIFICATION OF 4 INCH (100mm) CONES WITH TRAVERS OF ABOUT 95mm ONLY.
Havels 7649-30 Dura Edge Lightweight 9" Pinking Scissors Shears, Japan
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Stainless Steel Blades, Comfort Grip Handles, Elegant and durable scissors Japanese stainless steel blades are lightweight, with double-ground edges for silky smooth, precise cutting. Comfort grips add beauty and style.
Non-US Warranty: 30 days parts and labor.
Husqvarna Viking 120 Words from Japan Embroidery Disk
 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Janome Refurb MC300E Embroidery Machine JAPAN, 5.5x7.9 &4"Hoops, 100 Designs, Card Port, 3 Fonts, Resize, Rotate, Trace, Zoom, Stitch Count, 650 SPM
 Janome MC300E 5.5x7.9" Embroidery Only Machine JAPAN, 4" Hoop, PC Link |
Our Price: $799.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Limited Stock Condition: RB Refurbished |
Features
The Memory Craft 300E is the first Memory Craft devoted entirely to embroidery. That’s right, it only does embroidery. But it does it very, very well.
First, you get legendary Janome stitch quality, which means you can stitch out your designs at up to 650 stitches-per-minute with beautiful precision. Then you get all the other great Memory Craft features, like dozens of built-in designs in all sizes, on-screen editing, thread brand selection, and more.
Embroidery can take an everyday item and turn it into something uniquely yours. And because you’re using Janome technology, you’ll get professional quality results right from the start. Just put the item you want to embroider in the hoop (the 300E comes with a Standard 5” x 4.3” hoop and a 5.5” x 7.9” Large hoop). Choose the design you want to embroider and position it on the bright, LCD screen. You can bring in designs on PC Design Cards, ATA PC Cards or select from 90 built-in designs. Then, attach the hoop to the telescoping carriage arm and press the Embroidery mode key. You’re embroidering! The MC300E even stops and tells you when to change thread color.
- Backlit LCD screen
- PC link via ATA PC card
- Upgradeable via software
- Maximum embroidery size: 5.5" x 7.9" (140mm x 200mm)
- Embroidery speed 400 - 650spm
- Built-in designs: 100
- Fonts: 3
- Monogramming: 2 & 3 letter
- Built-in memory
- Compatible with Janome software
- Change colors of favorite thread: Janome, Robison-Anton, Madeira, Mettler
- Drag & Drop editing for easy placement
- Embroidery design resize 90%, 100%, 110%, 120%
- Rotate in 45 degree increments
- Flip vertically and horizontally
- Standard Hoops:
-Large 5.5" x 7.9" (140mm x 200mm)
-Standard 5" x 4.3" (126mm x 110mm)
- Embroidery area tracing
- MY SET screen controls for contrast, in/cm designation, and other customization
- Zoom in and out
- Multi-language selection
- Stitch-out time indicator
- Stitch counter
- Upper thread and presser foot sensors
- Manual thread tension control
- One-piece sewing light
MC300E Brochure.pdf
If you have been asking yourself, "What sewing machine should I purchase?", "What brand of sewing machine is good for beginner?", "What is a good sewing machine?", "Where should I buy a sewing machine?", "How do you know what sewing machine to purchase?", then you should watch this video.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Built in embroidery system
- Large display screen
- Large embroidery area - 200mm x 140mm
- Off line PC link
- Uses compact flash card - speed & high storage
- Adjustable embroidery speed
- 3 embroidery fonts built in
- 90 designs built in
- Upgradeable
- Design editing - rotation, flip, zoom, drag & drop.
- Time indicator and stitch counter
- 4 popular thread options on screen
- Design Tracing
- LCD Screen Grayscale 4.7" with Backlight (94.5x74mm)
- PC Link: Off-line ATA PC Card
- Multi-Folders (Embroidery) Built-in Memory: 1 Folder; ATA PC Card: 1 Folder
- Eco Mode: 1-30 min. + Off
- .JEF Embroidery Format
- Outer Memory Device: ATA PC Card PC Design Card
- 5.5" x 7.9" (140 x 200 mm) Maximum Embroidery Field
- Embroidery Sewing Speed: 400-650 spm
- 3 Monogramming Fonts
- Built-In Designs: Large: 10; Standard: 60; Combo: 20
- 2&3 Letter Monogramming Emblems
- Favorite Thread Selection
- Embroidery Area Tracing
- Standard Hoops: Large: 5.5"x 7.9" (140x200 mm); Standard: 5.0"x4.3" (126 x 110 mm)
- 11 Number of Programmed Languages
- Built-in Memory (Embroidery)
- Drag and Drop for Design Position Adjustment
- 90/100/110/120% Re-sizing (Design)
- Design Combination
- Zoom Function
- Flip (Vertical/Horizontal)
- 45 Degrees Clockwise and Counter-Clockwise Rotation
- Embroidery Time Indicator (Improved)
- Embroidery Stitch Counter Every 10 Stitches
- Semi-Automatic Thread Tension Control
- Upper Thread Sensor
- "P" foot Sensor
- Bottom Storage Compartment
- Wedge base-1 Piece Sewing Lights
- Soft Cover Case
Juki DDL-5550N High Speed Straight LockStitch Industrial Sewing Machine Head Only 7x18.5" Flat Bed Size Dimensions, Made in Japan
 32315: Juki DDL5550N High Speed Straight Stitch Sewing Machine Head Only |
Our Price: $599.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*FREE $30 Organ Japan 16x231 Regular Sharp Industrial Sewing Machine Needles, same as 16x257, 16x71, JLx1B and Juki DBx1 Needle System - Box of 100, Packs of 10
-
Brand: Juki
-
Application: For light-medium weight materials
-
Bed Size: 517mm x 178mm
-
Feed Dog: 3-Row
-
Hook: Automatic-lubricating full-rotary hook
-
Max. Sewing Speed: 5500 rpm/spm
-
Max. Stitch length: 5mm
-
Thread take-up: Slide Type
- Needle System (at time of delivery): DB x 1(#14)#9
- #18 For JE:134(Nm90)
-
Lubrication: Fully automatic lubrication system by means of plunger pump
-
Lubricating Oil: Juki New Defrix Oil #2(Equivalent to ISO VG32)
-
Lift of Presser Foot by Hand: 5.5 mm
-
Lift of Presser Foot by Knee: 13 mm
-
Weight of Machine Head: 75 LBS.
-
Thread Material: Polyester
-
Made In: Japan
Bed Size is 7" x 18 25/32"
Juki DDL-5550 Review
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Please click here for DDL-5550,DDL-5530 Instruction Manual (.pdf)Download PDF on Juki DDL5550N Series
Please review our Freight LTL shipping Policies
Juki DDL5550N Sewing Machine JAPAN. +Power Stand, Table & Motor, Fully Assembled Ready To Sew
 32886: Juki DDL5550N Sewing Machine Japan, Power Stand, Fully Assembled Ready To Sew |
Our Price: $999.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand, belt tension adjusted, belt guard installed, and sewn off, You only have to set up the thread stand. It ships from Atlanta
Complete with Table, Stand, Motor and Drawer. The thread take-up mechanism, feed mechanism, thread paths and hook have been further improved to enhance responsiveness to material changes and to ensure consistent stitch quality
Complete with Table, Stand, Motor and Drawer. The thread take-up mechanism, feed mechanism, thread paths and hook have been further improved to enhance responsiveness to material changes and to ensure consistent stitch quality
-
Brand: Juki
-
Application: For light-medium weight materials
-
Bed Size: 517mm x 178mm
-
Feed Dog: 3-Row
-
Hook: Automatic-lubricating full-rotary hook
-
Max. Sewing Speed: 5500 rpm/spm
-
Max. Stitch length: 5mm
-
Thread take-up: Slide Type
- Needle System (at time of delivery): DB x 1(#14)#9
- #18 For JE:134(Nm90)
-
Lubrication: Fully automatic lubrication system by means of plunger pump
-
Lubricating Oil: Juki New Defrix Oil #2(Equivalent to ISO VG32)
-
Lift of Presser Foot by Hand: 5.5 mm
-
Lift of Presser Foot by Knee: 13 mm
-
Weight of Machine Head: 75 LBS.
-
Thread Material: Polyester
- Made In: Japan
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Machine Specifications:-
Application: For medium weight materials.
-
Max Sewing Speed: 5,500 stitches per minute
-
Max Stitch Length: 4mm
-
Needle bar stroke: 30.7mm
-
Lift of the presser foot by hand: 5.5mm
-
Lift of the presser foot by knee: 13mm
-
Needle (at the time of delivery): DBX1 (#14) – For JE: 134 (Nm75)
-
Hook: Automatic-lubricating full-rotary hook
-
Lubrication: Automatic
-
Lubricating oil: Juki New Defrix Oil No. 1
Please click here for DDL-5550,DDL-5530 Instruction Manual (.pdf)
Download PDF on Juki DDL5550N Series
Please review our Freight LTL shipping Policies
Juki DNU1541 Fully Assembled Ready To Sew, Walking Foot Needle Feed Upholstery Sewing Machine, Servo Motor Power Stand
 32888: Juki DNU1541 Fully Assembled Ready To Sew, Walking Foot Needle Feed Upholstery Sewing Machine/Stand |
Our Price: $1,999.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand, belt tension adjusted, belt guard installed, and sewn off, You only have to set up the thread stand. It ships from Atlanta
Industrial Sewing Machine & Power Stand, Lg M Bobbin, 9mm S.L., 9/16mm Foot Lift, The best basic upholstery machine on the market and the only one still made in Japan along with Optional Juki 1541S safety clutch and 1508/H heavier duty models. Fully Assembled Ready To Sew!
Complete with Table, Stand, 110V Motor and Drawer
All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H . Will fit standard cut out. Also available with safety clutch
Industrial Sewing Machine & Power Stand, Lg M Bobbin, 9mm S.L., 9/16mm Foot Lift, The best basic upholstery machine on the market and the only one still made in Japan along with Optional Juki 1541S safety clutch and 1508/H heavier duty models. Fully Assembled Ready To Sew!
Complete with Table, Stand, 110V Motor and Drawer
All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H . Will fit standard cut out. Also available with safety clutch
- Single Needle
- Compound Needle Feed And Walking Foot
- Speed up to 3000 Stitches Per Minute
- 9 Mm Stitch Length
- Industrial Upholstery Machine
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- With its larger needlebar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness
- Alternating vertical movements of the walking foot and presser foot are as large as 6.5 mm
- In addition, the ratio between alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes
- Rectangular feed prevents needle from fraying
- Sews multi-layered parts of a material with consistent stitching pitch while preventing stitch gathering
- When the thread is caught in the hook or any other sewing trouble occurs, the safety mechanism will automatically operate to prevent the machine from being damaged
- Stitch length can be easily selected by the stitch dial
- Includes a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel
- Knee-lifter mechanism is built in the bed which reduces the pressure required to operate facilities setup
- Machine's full open-type top design makes adjusting works easier
- Machine comes with a lubricating mechanism that uses a centralized oil wick which substantially reduces the time and trouble required for oiling the machine
- A walking foot mechanism is built into the machine arm to prevent oil from scattering
- Stitch length: 9 mm
- Needle bar stroke: 36 mm
- Presser foot lift clearance by hand: 9 mm
- Presser foot lift clearance by knee: 16 mm
- Hook type: Horizontal-axis full-rotary double-capacity hook
- Needle: 135 x 17
- Thread: #30
- #5, B46
- B138, Nm=60/3
- 15/3
- Distance from needle to machine arm: 10.3"
- Bed size is 477mm 178mm, or 18.75" x 7" standard flatbed.
- Weight of machine head: 80.47 lbs
- UL Listed
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Downloads (.PDF)
• Instruction Manual
• Specifications
• Parts list
• Product Brochure
Juki DNU-1541S Walking Foot Needle Feed Machine, Power Stand, Fully Assembled Ready To Sew, Safety Clutch, MBobbins, 9mm Stitch Length, 9/16"Foot Lift
|
Our Price: $1,999.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand, belt tension adjusted, belt guard installed, and sewn off, You only have to set up the thread stand. It ships from Atlanta
Industrial Sewing Machine & Power Stand, Large M Bobbin, 9mm S.L., 9/16mm Foot Lift, The best basic upholstery machine on the market and the only one still made in Japan along with safety clutch, Optional 1508/H heavier duty model. Fully Assembled Ready To Sew!
Complete with Table, Stand, 110V Motor and Drawer
Comparison: All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H . Will fit standard cut out.
Industrial Sewing Machine & Power Stand, Large M Bobbin, 9mm S.L., 9/16mm Foot Lift, The best basic upholstery machine on the market and the only one still made in Japan along with safety clutch, Optional 1508/H heavier duty model. Fully Assembled Ready To Sew!
Complete with Table, Stand, 110V Motor and Drawer
Comparison: All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H . Will fit standard cut out.
- Single Needle
- Safety Clutch to protect hook and put back into timing if knocked out.
- Compound Needle Feed And Walking Foot
- Speed up to 3000 Stitches Per Minute
- 9 Mm Stitch Length
- Industrial Upholstery Machine
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- With its larger needlebar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness
- Alternating vertical movements of the walking foot and presser foot are as large as 6.5 mm
- In addition, the ratio between alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes
- Rectangular feed prevents needle from fraying
- Sews multi-layered parts of a material with consistent stitching pitch while preventing stitch gathering
- When the thread is caught in the hook or any other sewing trouble occurs, the safety mechanism will automatically operate to prevent the machine from being damaged
- Stitch length can be easily selected by the stitch dial
- Includes a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel
- Knee-lifter mechanism is built in the bed which reduces the pressure required to operate facilities setup
- Machine's full open-type top design makes adjusting works easier
- Machine comes with a lubricating mechanism that uses a centralized oil wick which substantially reduces the time and trouble required for oiling the machine
- A walking foot mechanism is built into the machine arm to prevent oil from scattering
- Stitch length: 9 mm
- Needle bar stroke: 36 mm
- Presser foot lift clearance by hand: 9 mm
- Presser foot lift clearance by knee: 16 mm
- Hook type: Horizontal-axis full-rotary double-capacity hook
- Needle: 135 x 17
- Thread: #30
- #5, B46
- B138, Nm=60/3
- 15/3
- Distance from needle to machine arm: 10.3"
- Bed size is 477mm 178mm, or 18.75" x 7" standard flatbed.
- Weight of machine head: 80.47 lbs
- UL Listed
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Downloads (.PDF)
• Instruction Manual
• Specifications
• Parts list
• Product Brochure
Juki DNU1541-7WB AK CP18 Auto Walking Foot Needle Feed Sewing Machine & Stand with Auto Backtack, Foot Lift, Needle Position, Thread Trim, CP18 Panel
 |
Our Price: $5,499.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
-7 Means Auto Backtack, Auto Thread Trimmers, Auto 9-16mm Foot Lift, Auto Needle Positioner, Control Panel, 9mm Stitch Length, Large M Bobbin, up to 3000SPM Servo Motor.
Has the standard CP18 Panel, not the wider CP180 as Panel shown in the picture on this page.
See videos below on CP18 panel* CP18 vs CP180 Comparison
The best basic upholstery machine on the market.
With its larger needle bar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness.
The machine's rectangular feeding motion promises the consistent feeding of materials of all thicknesses without stitch gathering.
All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H-7 . Will fit standard cut out. Also available with optional safety clutch
Has the standard CP18 Panel, not the wider CP180 as Panel shown in the picture on this page.
See videos below on CP18 panel* CP18 vs CP180 Comparison
The best basic upholstery machine on the market.
With its larger needle bar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness.
The machine's rectangular feeding motion promises the consistent feeding of materials of all thicknesses without stitch gathering.
All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H-7 . Will fit standard cut out. Also available with optional safety clutch
- Automatic thread trimmer
- Single Needle
- Compound Needle Feed And Walking Foot
- Speed up to 2500 Stitches Per Minute
- 9 Mm Stitch Length
- Industrial Upholstery Machine
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
<- With its larger needlebar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness
- Alternating vertical movements of the walking foot and presser foot are as large as 6.5 mm
- In addition, the ratio between alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes
- Rectangular feed prevents needle from fraying
- Sews multi-layered parts of a material with consistent stitching pitch while preventing stitch gathering
- When the thread is caught in the hook or any other sewing trouble occurs, the safety mechanism will automatically operate to prevent the machine from being damaged
- Stitch length can be easily selected by the stitch dial
- Includes a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel
- Knee-lifter mechanism is built in the bed which reduces the pressure required to operate facilities setup
- Machine's full open-type top design makes adjusting works easier
- Machine comes with a lubricating mechanism that uses a centralized oil wick which substantially reduces the time and trouble required for oiling the machine
- A walking foot mechanism is built into the machine arm to prevent oil from scattering
- Stitch length: 9 mm
- Needle bar stroke: 36 mm
- Presser foot lift clearance by hand: 9 mm
- Presser foot lift clearance by knee: 16 mm
- Hook type: Horizontal-axis full-rotary double-capacity hook
- Needle: 135 x 17
- Thread: #30- #5, B46 - B138, Nm=60/3 - 15/3
- Distance from needle to machine arm: 10.3"
- Bed size is 477mm 178mm, or 18.75" x 7" standard flatbed.
- Weight of machine head: 80.47 lbs
- UL Listed
*JUKI CP18 Control Panel - YouTube Videos
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Downloads (.PDF)
• Instruction Manual
• Specifications
• Parts list
• Product Brochure
Machine Specifications
Max. Sewing Speed 3,000 Stitch per Minute
Max. Stitch Length 9mm (forward / backward)
Needle Bar Stroke 36mm
Lift of the Presser Foot by Hand 9mm
Lift of the Presser Foot by Knee 16mm
Thread Take-Up Slide Type
Amount of Altering Vertical Movement 1 - 6.5mm
Hook Horizontal-Axis Full-Rotary Double-Capacity Hook
Needle (at time of delivery) 135x17 (Nm160) Nm125 - Nm180
Thread #30 - #5, B46
- B138, Nm=60/3
- 15/3
Pitch Changing Method By Dial
Lubrication Centralized Oil Wick Lubrication (hook:automatic)
Lubricating Oil Juki New Defrix oil No.2 (equivalent to ISO VG32)
Distance from Needle to Machine Arm 264mm
Bed Size 477x178mm
Compressed Air and Air Consumption 0.5MPa (5kgf/cm²), 0.3Nℓ/min
Motor Output 750W
Power Requirement Single-Phase 100 - 120V, 200
- 240V, 3-Phase 200
- 240V
Weight of the Machine Head 42.5kg
Juki Warranty Information
Juki LBH-783U Bartack Buttonhole Lockstitch Machine, 1/4-1.25"L to 345 Stitches, 12mmLift, Thread Trim, Hole Cut, Auto Oil, Cycle Motor, Stand 3600SPM
 Juki LBH-783U Bartack Buttonhole Lockstitch Machine, Stand 3600SPM |
Our Price: $6,695.00 Prices are subject to change, and only current prices will be honored. Availability: Please contact us for availability. Condition: New In Box |
Features
- Easy Reverse Sewing with Simple Operation
- Vertical Axis Large Hook
- Automatic Thread Safety Device
- Automatic Thread Cutter
- Automatic Buttonhole Cutter
- Front End Bobbin Winder
- Buttonhole Sewing Machine
- Uses DP5 (#11J) needles
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Brochure on Juki LBH-780 Series Buttonhole Machines- 1 Needle industrial lockstitch sewing machine
- Automatic button hole with easy buttonhole size adjustment which further enhances ease of operation.
- A newly introduced mechanism in the needle thread trimmer prevents interference with the positioning of buttonholes
- The shape of the face plate is designed to provide sufficient clearance around the needle entry position
- The work clamp can be lifted as high as 12mm enabling the machine to make high-quality buttonholes in heavy-weight materials
- This machine is capable of sewing heavy-weight materials such as bulky knits
- The pressure required to depress the start pedal and lifter pedal has been reduced which helps to dramatically reduce operator fatigue
- The knife mechanism and stop-motion mechanism produce less noise when they actuate, thus contributing to a more comfortable working environment
- Thanks to the simple design of the stop-motion mechanism and unique knife mechanism, the machine operates with low noise
- Uses DP5 (#11J) needles
YouTube Juki LBH-780 Demo
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
- Easy Reverse Sewing with Simple Operation
- Vertical Axis Large Hook
- Automatic Thread Safety Device
- Automatic Thread Cutter
- Automatic Buttonhole Cutter
- Front End Bobbin Winder
- Buttonhole Sewing Machine
- Uses DP5 (#11J) needles
- 1 Needle industrial lockstitch sewing machine
- Automatic button hole with easy buttonhole size adjustment which further enhances ease of operation.
- A newly introduced mechanism in the needle thread trimmer prevents interference with the positioning of buttonholes
- The shape of the face plate is designed to provide sufficient clearance around the needle entry position
- The work clamp can be lifted as high as 12mm enabling the machine to make high-quality buttonholes in heavy-weight materials
- This machine is capable of sewing heavy-weight materials such as bulky knits
- The pressure required to depress the start pedal and lifter pedal has been reduced which helps to dramatically reduce operator fatigue
- The knife mechanism and stop-motion mechanism produce less noise when they actuate, thus contributing to a more comfortable working environment
- Thanks to the simple design of the stop-motion mechanism and unique knife mechanism, the machine operates with low noise
- Uses DP5 (#11J) needles
Thread Recommendations for Buttonhole, Button Sew and Bartack Machines
Juki LBH-1790S Computer-controlled, High-speed, Buttonholing Machine, Servo motor, T-Stand, 31 Standard Buttonhole Styles, 99 Pattern Storage
 Juki LBH-1790S Computer-controlled, High-speed, Buttonholing Machine, Servo motor, T-Stand |
Our Price: $11,199.99 Prices are subject to change, and only current prices will be honored. Availability: Please contact us for availability. Condition: New In Box |
Features
This sewing machine is provided as standard with the voice-guidance system with clock function.
The voice guidance can be used for the purpose of production support such as giving the operator information about the number of pieces produced, work progress management and the operation rate of sewing machine, though the initial setting is required.
The voice guidance can be used for the purpose of production support such as giving the operator information about the number of pieces produced, work progress management and the operation rate of sewing machine, though the initial setting is required.
- Setting of functions such as the pattern number and the needle thread tension can be entered through the operation panel with ease. It is also possible to easily change the distance between buttonholes by means of the enlargement / reduction function.
- The operation panel is provided as standard with a USB port. This means that the sewing machine data management and software updating can be carried out with ease by means of the USB port.
This sewing machine achieves higher productivity with its improved capabilities such as the maximum sewing speed of 4,200 sti/min, quick acceleration at the beginning of sewing and quick deceleration at the end of sewing, increased thread trimming speed and the auto-lifter performance.
Main functions driven electrically
The electric-driven mechanism has been adopted for the work clamp foot lifter, needle / bobbin thread trimmers, work clamp foot pressure regulator, cloth trimming knife and thread tension controllers, thereby ensuring stable sewing that produces beautiful seams with less operating noise.
Active tension (electronic thread tension control mechanism)
- The needle thread tension can be separately set for the parallel section and bartacking section of the buttonhole seam according to various sewing conditions (thread, material, sewing speed, etc.) given, and those setting data can be stored in memory.
- The needle thread tension can be changed over at the parallel and bartacking section of the buttonhole seam without fail, thereby producing beautifully-finished buttonhole stitch shape.
- The needle thread tension to be employed at the beginning and end of sewing can be set individually.
- This helps prevent slip-off of the thread at the beginning of sewing and unravel of the finished seam.
Multiple-times knife dropping
Thanks to JUKI's unique multiple-times knife dropping function, the knife replacement is no longer required even when the buttonholing size is changed. In the case of small-lot production, frequent change in the sewing size and / or sewing of different cycle sewing patterns with different sewing sizes are required. In such a case, the number of times to drop the cloth trimming knife are automatically set according to the buttonholing size.
As many as 31 different buttonholing shapes are provided as standard
As may as 99 different sewing patterns can be stored in memory.
The sewing patterns that are stored in memory can be selected as desired through the operation panel.
Work clamp foot lifting height
The work clamp foot lifting height can be set as desired. The work clamp foot can be lifted as high as to 17 mm by the use of the reverse-rotation needle-up function.
Basting stitch on elastic materials
The basting stitch is effective on elastic materials such as knits.
Basting stitch : Since the needle thread is tucked in without fail, it will never jut out of the buttonhole seams. Basting stitch can be sewn by nine rounds.
Easy changeover of sewing settings
Changeover between purl stitching and whip stitching and between single stitching and double stitching can be carried out with ease.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Model name: LBH-1790S
- Application: Standard
- Lubrication: Semi-dry head (Hook : minute-quantity lubrication)
- Max. sewing speed: 4,200sti/min (at the time of delivery : 3,600sti/min)*
- Size of cloth cutting knife: 6.4-31.8mm (1/4"-1-1/4")
- Buttonhole length: Max. 41mm
- Needle thread tension: Active tension (solenoid)
- Needle (at the time of delivery): DP×5 (#11J) #11J-#14J
- Lift of the work clamp: 14mm (17mm when the reverse-rotation needle-up function is used)
- Auto-lifter: Provided as standard (stepping motor type)
- Needle throwing system: Stepping motor
- Cloth feeding system: Stepping motor
- Cloth cutting knife system: Motor-driven clamp system
- Number of standard patterns: 31 patterns
- Number of patterns that can be input: Max. 99 patterns
- Machine head drive system: Compact AC servomotor (direct-drive system)
- Power requirement/Power consumption: Single-phase 200-240V / 370VA
- Weight: Machine head (include motor) 55kg, Control box 5.5kg
Juki LG-158-1 Single Needle 30" LongArm Walking Foot Needle Feef Sewing Machine +Power Stand LG158, 10mm SL, 7/8" Lift, Big M Bobbin, 100 DDx1 Needles
 2500: Juki LG-158-1 Single Needle 30" LongArm Walking Foot Industrial Sewing Machine & Power Stand |
Our Price: $13,499.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
With a generous 750 mm of free space under the arm and powerful unison-feed that provides a maximum stitch length of 10 mm, the machine delivers outstanding productivity when sewing heavy materials such as tents and sheets.
- Easy Reverse Sewing with Simple Operation
- Vertical Axis Large Hook with Big Bobbin
- Automatic Thread Safety Device
- Easy Feed Walking Foot
- Front End Bobbin Winder
- Works Great on Tents, Awnings, Leather, Canvas, and Vinyl
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Catalog for Juki LG-158-1 Single NeedleInstruction Manual for Juki LG-158-1 Single Needle
- 30" of free space under the arm
- 10mm stitch length
- Delivers uncomparable performance on heavy-weight materials such as tents, awnings, leather, canvas, and vinyl
- Front end bobbin winder enables the user to operate the machine much easier
- The presser foot goes up as high as 7/8" to ensure easy placement
- Unison feed mechanism insures smooth and speedy feed of materials through the machine
- Easy feed with walking foot
- Vertical axis large hook which reduces the bobbin thread replacement
- Automatic thread safety device which prevents damage
Model name LG-158-1 (1-needle)
Max. sewing speed 1,500sti/min*
Max. stitch length 10mm (normal/reverse feed)
Needle bar stroke 46.9mm
Needle gauge Standard 19.1mm (3/4") -
Lift of the presser foot By pedal: 21.5mm
Thread take-up Side type
Alternating vertical movement 6mm - 19mm
Hook Vertical-axis large hook
Needle (at the time of delivery) DD×1 (#25)
Thread #20 - #5, B69
- B138, Nm=40/3
- 20/3
Safety mechanism: Safety Clutch Provided as standard
Bobbin winder Built on the machine arm
Lubrication By an oiler
Lubricating oil JUKI New Oil No.1 (equivalent to ISO VG7)
Distance from needle to machine arm 750mm
Bed size 1,088mm×230mm
Weight of the machine head 108kg
*“sti/min” stands for “Stitches per Minute.”
When you place orders
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
See Google Videos on various models of Juki LG158
See You Tube Videos on various models of Juki LG158
Juki LG-158-2 Double Needle 30" LongArm Walking Foot Sewing Machine, Std. Gauge, Servo Motor & Stand, 10mm SL, 7/8" Lift, LG Bobbin, 100 214x1 Needles
 64079: Juki LG-158-2 Double Needle 30" LongArm Walking Foot Industrial Sewing Machine & Power Stand |
Our Price: $14,999.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 6-8 weeks. Condition: New In Box |
Features
With a generous 750mm of free space under the arm and powerful unison-feed that provides a maximum stitch length of 10mm, the machine delivers outstanding productivity when sewing heavy materials such as tents and sheets.
This JUKI LG-158 is a 30" Long Arm Sewing Machine with Compound Feed (Walking Foot), Jumbo Bobbins and a 1/2" Needle Gauge.
The machine is complete with unassembled table top, heavy duty stand and new 110 Volt SERVO Motor.
Most widely used for sewing larger panels of materials such as vinyl signs, awnings, tarps, insulation covers, and other large items.
This is a MADE IN JAPAN machine.
This JUKI LG-158 is a 30" Long Arm Sewing Machine with Compound Feed (Walking Foot), Jumbo Bobbins and a 1/2" Needle Gauge.
The machine is complete with unassembled table top, heavy duty stand and new 110 Volt SERVO Motor.
Most widely used for sewing larger panels of materials such as vinyl signs, awnings, tarps, insulation covers, and other large items.
This is a MADE IN JAPAN machine.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Long-arm, Unison-feed, Lockstitch Machine with Vertical-axis Large HookMAX SEWING SPEED: 1,500 SPM
MAX FOOT LIFT: 22mm (Almost a Full Inch)
Max. sewing speed 1,500sti/min
Max. stitch length 10mm
Presser foot By pedal: 21.5mm
Alternating vertical movement 6～19mm
Distance from needle to machine arm 750mm
Needle DD×1 (#25)
Thread #20～#5, B69～B138, Nm=40/3～20/3
Juki LH-3528AGF 1/4" 2-Needle, Double Needle Feed, Heavy Spec, Lockstitch Sewing Machine, Power Stand, Servo Motor, 5-12mm Presser Foot Lift, 0-4mm SL
 |
Our Price: $2,299.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 6-8 weeks. Condition: New In Box |
Features
- MODEL NAME : LH-3528
- Feed system :Bottom-feed Needle-feed
- Application :For light-weight
- materials :For medium-weight
- materials :For jeans and
heavy-weight materials
- Max. sewing speed : 3,000rpm
- Max. stitch length : 4mm (normal/reverse feed) 5mm normal/reverse feed)
- Thread take-up : Slide type
- Needle bar stroke : 33.4mm
- Lift of the presser foot : By hand: 5.5mm, By knee: 12mm
- Hook :Vertical-axis regular hook
- Needle : DP5(#9)#9
- #14
- Lubrication : Fully automatic lubrication system by means of plunger pump
- Lubricating oil : JUKI New Defrix Oil No.2(equivalent to ISO VG32)
- The tension applied to the bobbin thread has been reduced and the needle thread path has been thoroughly renovated to achieve highly consistent feed of the needle thread. Puckering, stitch skipping, thread breakage and isolated idling loops can be therefore prevented, enabling the machine to produce beautifully finished seams with consistency.
- After the gauge has been replaced, the machine can be adapted to the newly installed gauge only by adjusting the clearance provided between the blade point of the hook and the needle. In this case, it is not necessary to change the hook timing in accordance with the gauge. As a result, the length of time required to replace the gauge is dramatically reduced.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- MODEL NAME : LH-3528
- Feed system :Bottom-feed Needle-feed
- Application :For light-weight
- materials :For medium-weight
- materials :For jeans and
heavy-weight materials
- Max. sewing speed : 3,000rpm
- Max. stitch length : 4mm (normal/reverse feed) 5mm normal/reverse feed)
- Thread take-up :Slide type
- Needle bar stroke :33.4mm
- Lift of the presser foot : By hand: 5.5mm, By knee: 12mm
- Hook :Vertical-axis regular hook
- Needle :DP5(#9)#9
- #14
- Organized split needle bar mechanism : Not provided
- Lubrication : Fully automatic lubrication system by means of plunger pump
- Lubricating oil : JUKI New Defrix Oil No.2(equivalent to ISO VG32)
- Distance from needle to machine arm : 245mm
- Bed size : 517mm x 178mm
- Weight of the machine head : 38kg
Please review our Freight LTL shipping Policies
Juki Warranty Information
LH-3528AGF 1/4" Double Needle Feed Lockstitch Industrial Sewing Machine LH-3128, Fully Assembled Ready to Sew, 5-12mmLift 4mmS.L, PowerStand 3000SPM
|
Our Price: $2,299.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 6-8 weeks. Condition: New In Box |
Features
*Free $30 Organ 135x5 Needles Box of 100 - Interchangable with Singer 20u # 1901, 1955, SY1995, SY6790, and 134, 134R, 135X5, 135x7, DPX5 , DPx7, DPx134.
Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand, belt tension adjusted, belt guard installed, and sewn off,
You only have to set up the thread stand. It ships from Atlanta
Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand, belt tension adjusted, belt guard installed, and sewn off,
You only have to set up the thread stand. It ships from Atlanta
- MODEL NAME : LH-3528
- Feed system :Bottom-feed Needle-feed
- Application :For light-weight
- materials :For medium-weight
- materials :For jeans and
heavy-weight materials
- Max. sewing speed : 3,000rpm
- Max. stitch length : 4mm (normal/reverse feed) 5mm normal/reverse feed)
- Thread take-up : Slide type
- Needle bar stroke : 33.4mm
- Lift of the presser foot : By hand: 5.5mm, By knee: 12mm
- Hook :Vertical-axis regular hook
- Needle : DP5(#9)#9
- #14
- Lubrication : Fully automatic lubrication system by means of plunger pump
- Lubricating oil : JUKI New Defrix Oil No.2(equivalent to ISO VG32)
- The tension applied to the bobbin thread has been reduced and the needle thread path has been thoroughly renovated to achieve highly consistent feed of the needle thread. Puckering, stitch skipping, thread breakage and isolated idling loops can be therefore prevented, enabling the machine to produce beautifully finished seams with consistency.
- After the gauge has been replaced, the machine can be adapted to the newly installed gauge only by adjusting the clearance provided between the blade point of the hook and the needle. In this case, it is not necessary to change the hook timing in accordance with the gauge. As a result, the length of time required to replace the gauge is dramatically reduced.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- MODEL NAME : LH-3528
- Feed system :Bottom-feed Needle-feed
- Application :For light-weight
- materials :For medium-weight
- materials :For jeans and
heavy-weight materials
- Max. sewing speed : 3,000rpm
- Max. stitch length : 4mm (normal/reverse feed) 5mm normal/reverse feed)
- Thread take-up :Slide type
- Needle bar stroke :33.4mm
- Lift of the presser foot : By hand: 5.5mm, By knee: 12mm
- Hook :Vertical-axis regular hook
- Needle :DP5(#9)#9
- #14
- Organized split needle bar mechanism : Not provided
- Lubrication : Fully automatic lubrication system by means of plunger pump
- Lubricating oil : JUKI New Defrix Oil No.2(equivalent to ISO VG32)
- Distance from needle to machine arm : 245mm
- Bed size : 517mm x 178mm
- Weight of the machine head : 38kg
Please review our Freight LTL shipping Policies
Juki LS-1341 Cylinder Bed Walking Foot Needle Feed Lockstitch Sewing Machine, Large M B/C & Hook, 16mm Foot Lift, 6mmS.L, 160mm Wheel, Stand* 2000SPM
 5515: Juki LS 1341 Cylinder Bed Walking Foot Needle Feed Sewing Machine/Stand |
Our Price: $5,499.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
The slimmed-down throat plate easily adjusts to the sewing of small tubular articles with diameters as small as φ40mm. This enhances the machine's ability to smoothly sew not only bags and shoes, but also small article such as wallets. The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance.
- Includes Power Stand for USA: The Cylinder of machine bed sticks off the left hand side of the table giving it open or free arm type advantages.
- Cylinder-bed, single-needle, Unison-feed, Lockstitch Machine with a Vertical-axis Hook
- The LS Series offers a consistent stitching pitch and outstanding ability to sew sharp curves.
This makes the machine ideal for the sewing of tubular articles.
* With large vertical-axis hook
* The machine is equipped as standard with a mechanism to correct uneven material feed by making-micro adjustments to the bottom-feed
* Compared with the elliptical feed, the rectangular feed helps reduce gathered stitches
* The ratio of alternate vertical movement remains unchanged even when the material thickness changes
* Higher lift of the presser foot
* The maximum alternating vertical movement is 6.5mm
* Excellent operability and maintainability
* The underside of the top end of the cylinder-bed is provided with an easy-to-remove cover. This promises easy cleaning of thread wastes
* The stitch length can be easily selected by the stitch dial
* The machine's enhanced operability features include a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel(160mm)
* A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup
* The machine's full-open-type top design makes adjusting works easier
* The machine comes with a lubricating mechanism that uses a centralized oil wick
* This substantially reduces the time and trouble required for oiling the machine. (The hook needs manual oiling with an oiler)
* A walking foot mechanism is built into the machine arm to prevent oil from scattering
* Complete with table stand and motor
The underside of the top end of the cylinder-bed is provided with an easyto-
remove cover. This promises easy cleaning of thread wastes.
The stitch length can be easily selected by the stitch dial. The machine's
enhanced operability features include a clear view of the area around the
needle, placement of the bobbin thread winder on the front face of the
machine arm, and a large handwheel(160mm).
- Thread range: #50-#8, B33-B92, Nm_120/3-30/3
- Distance from needle to neck 255mm
- Cylinder Bed Diameter 72mm
- Motor Output 750W
- Machine Weight 37.5 Kg
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
With its larger needlebar stroke, larger lift of the presser foot, and newly adopted double-tension mechanism, the machine sews beautifully with thick threads (low count thread) and at higher thread tensions. This allows the machine to sew a broad range of heavy materials.The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance. In addition, the ratio between the alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes.
With this feature, the machine sews multi-layered parts of the material consistently and without stitch gathering.
The slimmed-down throat plate easily responds to the sewing of small tubular articles with diameters as small as 40mm.
This enhances the machine's ability to smoothly sew not only bags and shoes, but also small articles such as wallets.
Please review our Freight LTL shipping Policies
Juki Warranty Information
Juki LU1560N 1/4" Double Needle Feed Walking Foot Sewing Machine, Power Stand, Lg M Bobbin & Winder, Auto Oil Hook, 16mm foot Lift, 9mm Stitch Length
 2501: Juki LU-1560N 1/4" Double Needle Feed Walking Foot Sewing Machine/Stand |
Our Price: $4,999.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
Note: New 1" gauge set between needles to make Juki LU1560N-1-GA machines is $500 more installed from the factory. Juki LU-1560N 2 Needle Unison Feed Lockstitch Industrial Machine. ... Needle Gauge, 4.8mm, 6.4mm, 7.9mm, 9.5mm, 12.7mm (3/16, 1/4, 5/16, 3/8, 1/2).
Optional Reliable SewQuiet 5000 No Clutch No Brushes, DC Servo Motor 600W 3/4HP Digital LED Speed Control, Reverse Switch, Fused Overload, Aux Power Outlet
Delivers the basic functions and performance best suited to the sewing of heavy-weight materials
Optional Reliable SewQuiet 5000 No Clutch No Brushes, DC Servo Motor 600W 3/4HP Digital LED Speed Control, Reverse Switch, Fused Overload, Aux Power Outlet
Delivers the basic functions and performance best suited to the sewing of heavy-weight materials
- Built in Bobbin Winder
- Knee Lifter Mechanism
- Automatic lubricating full rotary hook
- Extra Large Vertical Axis Hooks
- 2 Needle Type 1/4" Gauge Between Needles
- The sub oil pan and double filter prevents dust from entering the oil.
- Stitch length can be easily selected by the stitch dial
- The machine is full open type top design for easy maintenance and adjustment
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- 2-needle type machine 1/4" guage between needles
- Delivers the basic functions and performance best suited to the sewing of heavy-weight materials
- Automatic lubricating mechanism improves maintainability
- The sub oil pan and double filter prevents dust from entering the oil.
- Built in bobbin winder.
- Knee-lifter mechanism is built in
- Stitch length can be easily selected by the stitch dial
- Extra large vertical axis hooks
- The machine is full open type top design for easy maintenance and adjustment
Juki Brochure on LU15 Series Sewing Machines
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
These You Tube Video are of basic Juki LU1560N with added Electronics, Model Juki LU 1560N 7 0BBAA. Electronics are not included with Juki LU1560N on this page. Electronics are Auto Back Tack, Auto Needle Position, Auto Thread Trim, and Auto Foot Lift
Optional Gauge Sets: for Juki LU-1560N 2 Needle Unison Feed Lockstitch Industrial Machine. ...
Needle Gauges:, 4.8mm, 6.4mm, 7.9mm, 9.5mm, 12.7mm (3/16, 1/4, 5/16, 3/8, 1/2).
2-needle, Unison-feed, Lockstitch Machine with Vertical-axis, Large Hook
Seiko LZ2-990-2N Single Needle, Zig-Zag Stitch Machine
 Seiko LZ2-990-2N Single Needle, Zig-Zag Stitch Machine |
Our Price: $3,599.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
●For sewing light to medium weight materials such as fabrics, leather, canvas, and vinyl.
●Suitable for sewing such as leather garment, shoe upper, leather glove.
Features
●Suitable for light to medium materials
●Large vertical axis rotary hook
●Extra wide zig-zag
●20 & 30 inches long arm models are available
●Twin needle machine is available on request
●Suitable for sewing such as leather garment, shoe upper, leather glove.
Features
●Suitable for light to medium materials
●Large vertical axis rotary hook
●Extra wide zig-zag
●20 & 30 inches long arm models are available
●Twin needle machine is available on request
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
Number of needle: Single needle
-
Max. sewing speed: 2,800 r.p.m.
-
Max. stitch length: 5.0 mm
-
Zig-Zag width: 0～10 mm
-
Clearance under presser foot:
-By Knee: 9.0 mm
-By Hand: 8.0 mm
-
Needle: DP x 17 (#19)
-
Thread: #30 (standard)
-
Hook: Large vertical axis hook
-
Lubrication: Semi automatic
-
Bed size: 477mm x 177 mm
-
Working space: 258mm x 110 mm
-
Net weight (Head only): 28Kg
- Motor: Clutch motor
Seiko LZ2-992-2N Single Needle, Walking Foot Zig-Zag Stitch Machine/Stand
 Seiko LZ2-992-2N Single Needle, Walking Foot Zig-Zag Stitch Machine/Stand |
Our Price: $4,999.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
●For sewing light to medium weight materials such as fabrics, leather, canvas, and vinyl.
●Suitable for sewing such as leather garment, shoe upper, leather glove.
Features
●Suitable for light to medium materials
●Large vertical axis rotary hook
●Extra wide zig-zag
●20 & 30 inches long arm models are available
●Twin needle machine is available on request
●Suitable for sewing such as leather garment, shoe upper, leather glove.
Features
●Suitable for light to medium materials
●Large vertical axis rotary hook
●Extra wide zig-zag
●20 & 30 inches long arm models are available
●Twin needle machine is available on request
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
Number of needle: Single needle
-
Max. sewing speed: 2,500 r.p.m.
-
Max. stitch length: 5.0 mm
-
Zig-Zag width: 0～10 mm
-
Clearance under presser foot:
-By Knee: 9.0 mm
-By Hand: 8.0 mm
-
Needle: DP x 17 (#19)
-
Thread: #30 (standard)
-
Hook: Large vertical axis hook
-
Lubrication: Semi automatic
-
Bed size: 477mm x 177 mm
-
Working space: 258mm x 110 mm
-
Net weight (Head only): 28Kg
- Motor: Clutch motor
Juki LZ-2280A 5mm Zigzag Lockstitch Sewing Machine, Power Stand with Servo Motor
 2525: Juki LZ-2280N 5mm Zigzag Lockstitch Sewing Machine Power Stand |
Our Price: $3,999.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
*Bonus Extra: $30 Value Organ 135x5 Needles, Box of 100 - same as SY1995, SY6790, 134R, 135X5, DPX5 Needle Systems
Ideal for all types of foundations and lingerie. For light to medium heavy weight fabrics. Use for such products as foundation garments, brassieres, underwear, apparel and accessory groups. Also for satin stitching or applique.
Ideal for all types of foundations and lingerie. For light to medium heavy weight fabrics. Use for such products as foundation garments, brassieres, underwear, apparel and accessory groups. Also for satin stitching or applique.
- Stitch patterns: standard one-step to left, one step to right zigzag stitch up to 5mm.
- Feeding amount: standard max. 2.5 mm
- Sewing speed: max. 5,500 s.p.m.
`Needle throw: max 3mm
- Presser foot lift:
by hand: 5mm
by knee: 10mm
- Up To 5500 Stitches Per Minute
- Single Needle Zigzag
- Zig Zag Lockstitch
- Satin Stitch Applique
- Long And Wide Zigzag
- Industrial Zigzag Machine
The hook driving shaft offset mechanism assures trouble-free and consistent zigzag stitching.
# The machine is equipped with a hook-driving shaft-offset mechanism which places the hook-rotating shaft off-center from the center of zigzag stroke of the needle. This mechanism allows the blade point of the hook to catch the needle thread every time regardless of the needle throwing direction. As a result, the machine is immune to sewing troubles such as stitch skipping and thread breakage, annoyances likely to occur with the conventional machine, especially when the needle throws to the right.
The market-proven hook and thread take-up lever enables sewing with upgraded consistency with a lower tension applied to the thread.
# With its market-proven hook and thread take-up lever, the machine produces high-quality, uniform seams even when sewing at extremely low thread tensions. In addition, these new components prevent stitch skipping and thread breakage during sewing and offer dramatically improved responsiveness to thread changing. The machine uses a wide range of thread types such as synthetic thread, spun thread, and cotton thread.
The standard zig-zag stitching machine creates softly finished seams. The needle rocking mechanism is provided with a triangular cam which helps produce beautiful seams with consistency.
Click HERE for Brochure on Juki LZ-2280N Series Zigzag Sewing Machines
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
LZ-2280AIdeal for all types of foundations and lingerie. For light to medium heavy weight fabrics. Use for such products as foundation garments, brassieres, underwear, apparel and accessory groups. Also for satin stitching or applique.- Stitch patterns: standard one-step to left, one step to right zigzag stitch up to 5mm.
- Feeding amount: standard max. 2.5 mm
- Sewing speed: max. 5,500 s.p.m.
`Needle throw: max 3mm
- Presser foot lift:
by hand: 5mm
by knee: 10mm
- Up To 5500 Stitches Per Minute
- Single Needle Zigzag
- Zig Zag Lockstitch
- Satin Stitch Applique
- Long And Wide Zigzag
- Industrial Zigzag Machine
The hook driving shaft offset mechanism assures trouble-free and consistent zigzag stitching.
# The machine is equipped with a hook-driving shaft-offset mechanism which places the hook-rotating shaft off-center from the center of zigzag stroke of the needle. This mechanism allows the blade point of the hook to catch the needle thread every time regardless of the needle throwing direction. As a result, the machine is immune to sewing troubles such as stitch skipping and thread breakage, annoyances likely to occur with the conventional machine, especially when the needle throws to the right.
The market-proven hook and thread take-up lever enables sewing with upgraded consistency with a lower tension applied to the thread.
# With its market-proven hook and thread take-up lever, the machine produces high-quality, uniform seams even when sewing at extremely low thread tensions. In addition, these new components prevent stitch skipping and thread breakage during sewing and offer dramatically improved responsiveness to thread changing. The machine uses a wide range of thread types such as synthetic thread, spun thread, and cotton thread.
The standard zig-zag stitching machine creates softly finished seams. The needle rocking mechanism is provided with a triangular cam which helps produce beautiful seams with consistency.
Click HERE for Brochure on Juki LZ-2280N Series Zigzag Sewing Machines
Juki LZ-2282N /CP160 4.5mm Straight Stitch Zigzag & Lace Cut Knife, Industrial Sewing Machine, 2.5mmSL, & DC Power Stand 5000RPM, 100 DPx5 Needles
 2521: Juki LZ-2282N /CP160 4.5mm Straight Stitch Zigzag & Lace Cut Knife, Industrial Sewing Machine, 2.5mmSL, & DC Power Stand 5000RPM, 100 DPx5 Needles |
Our Price: $8,499.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
When used in the lace-attachment process for ladies' foundation, the machine sews lace on the garment body while simultaneously cutting only the garment body.
- 1-Needle
- Lockstitch
- Needle Feed
- Auto Thread Trim
- Industrial Sewing Machine
Click HERE for Brochure on Juki LZ-2280N Series Zigzag Sewing Machines
Extended US Warranty: 90 days adjustments or 30 days replacement on materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Model name LZ-2282NStitch system Standard zigzag
Stitch pattern sample
Max. sewing speed 5,000rpm
Max. zigzag width 4.5mm
Max. stitch length 2.5mm
Needle 438 (Nm70), DP×5 (#10)
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki LZ391N, 11" Arm, Dial or Knee Lever for Zigzag Width up to 12mm, Straight Stitch or ZZ, Free Motion Sewing Machine, Servo Motor Power Stand
 7504: Juki LZ-391N 11" Arm, Straight,Zigzag, Freemotion Sewing Machine, Stand |
Our Price: $3,299.95 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
*This is not a stock item. It is only available upon request upon which time it will be manufactured. Usually takes up to 90 days before shipping. Specify set up for embroidery only or zigzag with feed.
It will do both.
The machine is capable of embroidering names and marks on sewing products, as well as zigzag stitching, by simply changing the throat plate and setting zero stitch length. When using this machine for zigzag stitching, the zigzag width and stitch length can be changed so that many different types of zigzag stitch can be sewn.
Features:
It will do both.
The machine is capable of embroidering names and marks on sewing products, as well as zigzag stitching, by simply changing the throat plate and setting zero stitch length. When using this machine for zigzag stitching, the zigzag width and stitch length can be changed so that many different types of zigzag stitch can be sewn.
Features:
- The JUKI LZ-391N can be used in three different ways.
- When this machine is used as embroidering machine, the zigzag width as large as 12mm and the sewing speed is as high as 1,700 s.p.m. When used as a zigzag stitch machine, the zigzag width is as large as 10mm and the sewing speed is as high as 2,000 s.p.m.
- Furthermore, the JUKI LZ-391N can be used as a straight stitching machine capable of running at a speed of 2,000 s.p.m. by simply setting the zigzag width to 0.
- It can be easily converted to an embroidering machine by removing the feed dogs, which make a zigzag stitch machine or a straight stitching machine.
- To change from embroidering to zigzag stitching or vice-versa, all you need to do is install the throat plates included and exclusive for either function, and install/remove the needle plate and feed dog. This procedure can be carried out very easily.
- The zigzag width and stitch length can be easily
adjusted.
- The zigzag width is adjusted by raising/lowering the knee lifter using the knee. The stitch length is adjusted by moving the feed adjustment knob up/down by hand. This adjustment mechanism allows even the inexperienced operator to carry out adjustments without any difficulty and quickly,thereby enabling this machine to be used very easily.
- For fixed width zigzag use the settings on the face of the machine as explained on paragraph 4.3 on page 17 of Instruction Manual for Juki LZ391N.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki LZ391N CatalogueInstruction Manual for Juki LZ391N
Juki LZ391N You Tube Videos
- Applications Embroidering and zigzag stitching light-, `medium- and heavy weight materials
- Sewing Speed Max. 2,000 s.p.m. (for zigzag stitching with thezigzag width set at 10mm)
- Max. 1,700 s.p.m. (for embroidering with the zigzag width set at 12 mm)
- Thread take-up Link type, thread take-up
- Needle bar stroke 33.4 mm
- Needle DB X 1 #9 through # 16
- Stitch Length Max. 5mm
- Stitch length adjustment methods Moving the knob up/down
- Zigzag width 0 through 12 mm
- Zigzag width regulating method Using the knee lifter with the zigzag width pointer released. If you sew the product with
the zigzag width fixed to a certain value, the pointer should be fixed to that value.
- Lift of the presser foot Max. 8mm (with the presser foot lifting lever)
- Installing the attachments The distance from the needle entry to the center of the needle bar is 22.2 mm. The
attachments for an ordinary zigzag embroidering machine can be used with this machine.
- Hook DB type, full-rotary
- ( A hook using a patented lubricating method, and capable of using a thick thread
- Lubrication Method Centralized lubrication system (using and oiler)
- Material handling area on the machine 270 mm (from the needle entry to the bottom of the arm)
See Juki LZ-391N Videos on You Tube
Please review our Freight LTL shipping Policies
Model name LZ-271 Replaced by LZ-391N
Max. sewing speed 2,000sti/min (with zigzag width is set to 10mm)
1,700sti/min (with zigzag width is set to 12mm)
Needle bar stroke 33.4mm
Zigzag width 0～12mm
Stitch length - Max. 5mm
Needle DB×1B (#11) #9～#18 DB×1B (#14) #9～#16
Juki LZH-1290 1-Needle, Lockstitch, 8mm Zigzag Stitching Machine with Large Hook, Assembled Power Stand, Servo Motor
 33048: Juki LZH-1290 1-Needle, Lockstitch, Zigzag Stitching Machine, Power Stand |
Our Price: $4,699.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
- With its newly incorporated triangular cam, the machine uniformly tenses thread in zigzag strokes regardless of the needle position, and the needle always enters the material at right angles. This prevents the needle from swaying during zigzag stitching.
- The machine offers outstanding capabilities for the sewing of sports shoes and leather shoes that require a wider zigzag width. The zigzag width can be quickly and easily adjusted by the dial mounted on the front face of the machine.
- To ensure smooth sewing of heavy materials, the lift of the presser foot is as high as 14mm.
- By reducing the frequency of bobbin thread replacement, the newly introduced horizontal-axis double-capacity hook contributes to increased efficiency in sewing. This feature is extremely helpful when sewing with thick thread.
- Ships assembled with power stand
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki LZH-12901-needle, Lockstitch, Zigzag Stitching Machine with Large Hook.
- Max sewing speed: 2,000rpm
- Max stitch length: 6mm
- Zigzag width: Max. 8mm (adjustable to 10mm)
- Zigzag width adjustment method: by dial
- SY1906 (Nm100) Nm90～Nm110
- Needle bar stroke: 35mm
- Presser foot lift: 6mm by hand, 14mm by knee
- Thread take-up: Link type
- Hook: Horizontal-axis full-rotary double-capacity hook
- Needle: SY1906 (Nm100) Nm90～Nm110
- Thread: #50～#8, B33～B92, Nm=120/3～30/3
- Lubrication: By an oiler (hook: automatic)
- Lubricating oil: JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
- Distance from needle to machine arm: 295mm
- Bed size: 477mm x 178mm
- Weight of machine head: 35kg
Please review our Freight LTL shipping Policies
Juki LZH-1290-7 10mm Zigzag Machine, Auto Backtack, Thread Trim, Foot Lift, Needle Position, Lg Hook, M Bobbins, Assembled Stand, Servo Motor 2000SPM
 |
Our Price: $8,499.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Please allow 30-60 days before delivery
- The machine tenses thread uniformly over the zigzag stroke to produce beautifully finished stitches at a high speed. With its extended zigzag with, higher presser foot lift, and newly introduced horizontal-axis double-capacity hook, the machine upgrades the functions required for the sewing of heavy materials.
- With its newly incorporated triangular cam, the machine uniformly tenses thread in zigzag strokes regardless of the needle position, and the needle always enters the material at right angles. This prevents the needle from swaying during zigzag stitching.
- The machine offers outstanding capabilities for the sewing of sports shoes and leather shoes that require a wider zigzag width. The zigzag width can be quickly and easily adjusted by the dial mounted on the front face of the machine.
- To ensure smooth sewing of heavy materials, the lift of the presser foot is as high as 11mm.
- By reducing the frequency of bobbin thread replacement, the newly introduced horizontal-axis double-capacity hook contributes to increased efficiency in sewing. This feature is extremely helpful when sewing with thick thread.
- Ships assembled with power stand
LZH-1290-7(with automatic thread trimmer) 1-needle, Lockstitch, Zigzag Stitching Machine with Large Hook.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki LZH-12901-needle, Lockstitch, Zigzag Stitching Machine with Large Hook.
- Max sewing speed: 2,000rpm
- Max stitch length: 6mm
- Zigzag width: Max. 8mm (adjustable to 10mm)
- Zigzag width adjustment method: by dial
- Needle bar stroke: 35mm
- Presser foot lift: 6mm by hand, 11mm by knee
- Thread take-up: Link type
- Hook: Horizontal-axis full-rotary double-capacity hook
- Needle: SY1906 (Nm100) Nm90～Nm110
- Thread: #50～#8, B33～B92, Nm=120/3～30/3
- Lubrication: By an oiler (hook: automatic)
- Lubricating oil: JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
- Distance from needle to machine arm: 295mm
- Bed size: 477mm x 178mm
- Weight of machine head: 35kg
Max. sewing speed 2,000sti/min
Max. stitch length 6mm
Presser foot By knee: 11mm
Zigzag width Max. 8mm (adjustable to 10mm)
Needle SY1906 (Nm100) Nm90～Nm110
Please review our Freight LTL shipping Policies
Juki MB-1373 Single Thread Chainstitch Button Sewer Sewing Machine, 8-16-32 Stitches, Size 10-28mm Diameter, 1.8-3.5mm High, Power Stand, Servo Motor
 |
Our Price: $2,999.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
The single-thread, chainstitch, button sewing machine, which is frequently used for sewing buttons on men's wear and blouses under different sewing conditions, has been redesigned with its capabilities upgraded.
Thread-fray-prevention ON/OFF changeover mechanism:
The machine is provided as standard with a "thread-fray-prevention ON/OFF changeover mechanism” to help produce beautiful seams with added durability.
Attachments:
The attachments used for your conventional machines are applicable as they are.
Speedy sewing:
The machine sews buttons with an optimum number of
stitches; 8, 16 or 32, according to the sewing conditions.
Max. sewing speed: 1,500rpm
Number of stitches: 8, 16, and 32 stitches
Feed length (crosswise feed): 2.5～6.5mm
Feed length (lengthwise feed): 0～6.5mm
Applicable button: Shank button, Wrapped-around button, Snap, Label, Metal button, Stay button
(exclusive attachments have to be used)
Button size: φ10～28mm (thickness of button: 1.8～3.5mm)
Needle: TQ×1 (#16) #14～20
Thread-fray-prevention ON/OFF changeover mechanism:
The machine is provided as standard with a "thread-fray-prevention ON/OFF changeover mechanism” to help produce beautiful seams with added durability.
Attachments:
The attachments used for your conventional machines are applicable as they are.
Speedy sewing:
The machine sews buttons with an optimum number of
stitches; 8, 16 or 32, according to the sewing conditions.
Max. sewing speed: 1,500rpm
Number of stitches: 8, 16, and 32 stitches
Feed length (crosswise feed): 2.5～6.5mm
Feed length (lengthwise feed): 0～6.5mm
Applicable button: Shank button, Wrapped-around button, Snap, Label, Metal button, Stay button
(exclusive attachments have to be used)
Button size: φ10～28mm (thickness of button: 1.8～3.5mm)
Needle: TQ×1 (#16) #14～20
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click here to download the Juki 1370 series information sheet (.PDF)Thread Recommendations for Buttonhole, Button Sew and Bartack Machines
Please review our Freight LTL shipping Policies
Juki MEB 3200J Trousers Keyhole Eyelet Buttonhole, Industrial Top Bottom Thread ChainStitch Sewing Machine, Panel, Stand, AutoCut, ThreadTrim FootLift
 |
Our Price: $19,995.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
Needle and looper thread tensions can be digitally established on the operation panel according to sewing conditions. Data can be registered on a pattern-by-pattern basis to easily reproduce the same sewing conditions.
- Using conventional machines, it's often quite difficult to reproduce the same sewing conditions. This machine does it with ease. With this capability, the MEB-3200 responds immediately to material changes, significantly reducing the time required for setup changes or adjustments. The machine
also ensures the consistent production of high-quality seams.
Thread tensions can be separately established for various sections of a buttonhole such as eyelet sections and
parallel sections.
- The machine promises high-quality seams by smoothly responding to changes in stitch formation and allowing the operator to set a separate thread tension for the bartacking sections of buttonholes.
- Thread tensions for the beginning and end of sewing can also be separately established. This helps prevent loose stitches or slip-off or raveling of thread at the beginning of sewing.
Threading work can be more easily.
- Since fewer parts need to be threaded, the machine can be threaded more quickly and easily than conventional buttonholing machines.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki MEB 3200 ManualEXCELLENT CAPABILITIES TO HELP IMPROVE SEAM QUALITY
Vertically driven cloth cutting knife controlled by a stepping motor.
- The knife is controlled by a stepping motor. This enables easy adjustment of the knife pressure on the operation panel to suit the material to be used, thereby preventing irregular cutting.
- Data on knife pressure can be registered on pattern-by-pattern basis to establish the best-suited knife pressure according to sewing specifications. Adequate knife pressure improves durability of cloth-cutting knife and knife guard.
- Selection between the cut-before knife and cut-after knife can be made on the operation panel.
- The stepping-motor-controlled cloth-cutting knife is free from the troubles likely to affect air-driven knives, including dull cutting and the breakage of parts such as the knife-driving arm. In addition, a large-capacity compressor is no longer required since the machine uses less compressed air.
Separately driven right and left work clamps.
- The right and left work clamps are separately driven by independent air cylinders. With this mechanism, the work clamps reliably clamp materials of different thicknesses to prevent the materials from flopping.
Download a Brouchure
Thread Recommendations for Buttonhole, Button Sew and Bartack Machines
Juki MEB 3200S Jacket Keyhole Eyelet Buttonhole, Industrial Top&Bottom Thread ChainStitch Sewing Machine, Stand, Panel, Auto Cut, ThreadTrim, FootLift
 |
Our Price: $19,995.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
Needle and looper thread tensions can be digitally established on the operation panel according to sewing conditions. Data can be registered on a pattern-by-pattern basis to easily reproduce the same sewing conditions.
- Using conventional machines, it's often quite difficult to reproduce the same sewing conditions. This machine does it with ease. With this capability, the MEB-3200 responds immediately to material changes, significantly reducing the time required for setup changes or adjustments. The machine
also ensures the consistent production of high-quality seams.
Thread tensions can be separately established for various sections of a buttonhole such as eyelet sections and
parallel sections.
- The machine promises high-quality seams by smoothly responding to changes in stitch formation and allowing the operator to set a separate thread tension for the bartacking sections of buttonholes.
- Thread tensions for the beginning and end of sewing can also be separately established. This helps prevent loose stitches or slip-off or raveling of thread at the beginning of sewing.
Threading work can be more easily.
- Since fewer parts need to be threaded, the machine can be threaded more quickly and easily than conventional buttonholing machines.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
EXCELLENT CAPABILITIES TO HELP IMPROVE SEAM QUALITYVertically driven cloth cutting knife controlled by a stepping motor.
- The knife is controlled by a stepping motor. This enables easy adjustment of the knife pressure on the operation panel to suit the material to be used, thereby preventing irregular cutting.
- Data on knife pressure can be registered on pattern-by-pattern basis to establish the best-suited knife pressure according to sewing specifications. Adequate knife pressure improves durability of cloth-cutting knife and knife guard.
- Selection between the cut-before knife and cut-after knife can be made on the operation panel.
- The stepping-motor-controlled cloth-cutting knife is free from the troubles likely to affect air-driven knives, including dull cutting and the breakage of parts such as the knife-driving arm. In addition, a large-capacity compressor is no longer required since the machine uses less compressed air.
Separately driven right and left work clamps.
- The right and left work clamps are separately driven by independent air cylinders. With this mechanism, the work clamps reliably clamp materials of different thicknesses to prevent the materials from flopping.
Download a Brouchure
Thread Recommendations for Buttonhole, Button Sew and Bartack Machines
Juki MF3620-U300 4Needle Feed Off Arm Flat Seamer Top Bottom Coverstitch Machine/Stand
 |
Our Price: $11,995.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Stretch Interlock Sewing Machine JAPAN MF3620, Stand 4200SPM, A new model Juki MF-3620 U300 with direct or belt drive (depending on stock) has been introduced as an addition to the MF Series of JUKI sewing machines. The new machine consumes only about half the power of the conventional models. The enhanced responsiveness (compared with the model equipped with the clutch motor) of the MF-3620 gives the operator complete control over the material when sewing curved sections. Safely within its new shield, the frame is equipped with mechanisms for micro-quantity lubrication and forced oil circulation. The thread take-up mechanism arranged on the outside of the arm prevents the entry of oil splashed and dust. The MF-3620 is also configured with JUKI's unique oil-thrower mechanism to protect the looper section from oil infiltration. Excess oil is speedily reclaimed via the new oil groove.
We are delighted to announce that new subclass models have been added; one model is best-suited to the sewing of hard-to-sew materials with multidirectional elasticity such as swimwear, while another model is for the prevention of uneven feed of the tape-attached parts of boxer briefs and running shirts to provide more consistent seam quality. In addition, the multipurpose type subclass model which is able to perform both one-side cutting and both-sides cutting has also been added, intended for sewing plants engaged in the sewing of diversified sewing items.
We are delighted to announce that new subclass models have been added; one model is best-suited to the sewing of hard-to-sew materials with multidirectional elasticity such as swimwear, while another model is for the prevention of uneven feed of the tape-attached parts of boxer briefs and running shirts to provide more consistent seam quality. In addition, the multipurpose type subclass model which is able to perform both one-side cutting and both-sides cutting has also been added, intended for sewing plants engaged in the sewing of diversified sewing items.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Application: Light- to heavy weight (knit)Max. sewing speed: 4,200 stitches/min
Stitch length: 1.6 ～ 2.5mm (standard 2.1mm)
Needle gauge: 5.2, 6.0mm
Needle: FL × 118GCS (#10S) #9S ～ #12S
Retainer needle: FLG-8 (#8) #8～#11
Brochure on Juki MF-3620 Series
JUKI MF-3620 with Optional Automation
Please review our Freight LTL shipping Policies
Juki MF-7923 U11 B64 Cylinder Bed Top and Bottom 3 Needle Coverstitch Machine, Power Stand, Servo Motor, White Table Top (Replaces MF7823)
 54820: Juki MF-7923 U11 B64 Cylinder Bed Top Bottom 3 Needle Coverstitch Machine/Stand |
Our Price: $3,799.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Table with Servo Motor (Replaces MF-7823), The machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear. It is not a specific-purpose model, but a basic one which can be used for a broader range of processes independently. The MF-7900 Series is a newly developed coverstitch machine provided with lots of mechanisms for improving the seam quality.
Specifications
Model: Juki MF-7923
-A needle bar stroke conversion mechanism
-Looper thread twining prevention mechanism
-Stitch type :3-needle top and bottom coverstitch
-Max. sewing speed :6.500rpm
-Stitch length: 0.93.6mm (stitch length can be adjusted
to 4.5mm)
-Differential-feed ratio(switchable): 1:0.91:1.8 (1:0.61:1.1)
-Needle gauge :4.8mm 5.6, 6.4mm
-Needle UY128GAS: #9S#14S (standard #10S)
-Lift of the presser foot: 5mm (with top and bottom coverstitch), 8mm(with bottom coverstitch)
-Stitch pitch adjustment: By dial
-Differential feed adjustment: By micro-adjustment mechanism
-Lubrication: Automatic
-Lubricating oil: JUKI Machine Oil 18 (equivalent to ISO VG18)
-Micro-lifter: Provided as standard
-Needle bar stroke converting function :Provided as standard
-Silicon oil tank for needle tip and
needle thread :Provided as standard
-Cartridge oil filter: Provided as standard
-Weight of the machine head: 42kg
*Speed depends on thread, material and operation.
Applications
The machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear. It is not a specific-purpose model, but a basic one which can be used for a broader range of processes independently.
Features
The Juki MF-7900 series is newly launched and includes totally renewed seam quality functions and performance. The machine is able to sew almost all kinds of sewing products, such as foundations, light-weight underwear and heavy-weight fleece, increasing the number of sewing items. The machine produces seams, which match materials and thread with consistency.
Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high-grade well-tensed seams for outer wear.
The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top covering stitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread.
A differential-feed adjustment mechanism with a micro-adjustment mechanism to provide a constant differential-feed ratio. The differential-feed amount can be easily adjusted to the best suited value for the material to be used.
The machine comes with a variety of features to increase applicable types of sewing products.
Since the front and rear feed dogs are synchronized, the differential- feed ratio is constant, requiring no additional adjustment, even when the stitch length is changed.
Adjustment of the feed dog inclination can be carried out from outside with ease. The feed dog inclination adjustment mechanism works effectively to secure the material being sewn in place with increased reliability and thereby preventing uneven material feed and puckering.
The micro-lifter keeps the presser foot in a slightly raised position during sewing to help prevent problems such as slippage and deformation, or damages that can easily occur when sewing elastic materials.
The looper thread cam comes provided with a thread twining prevention mechanism.
Even if the thread twines around the looper thread cam, the cam can be easily detached for removal of the thread.
The well-balanced design of the machine achieves low-vibration and low-noise operation even under the high-speed mode.
This enables the operator to concentrate on sewing work in a more comfortable environment.
The machine is designed to use gauge components which are similar to commercially available ones.
This means that gauge components for the machine are readily available and can be replaced with little or no difficulty.
Specifications
Model: Juki MF-7923
-A needle bar stroke conversion mechanism
-Looper thread twining prevention mechanism
-Stitch type :3-needle top and bottom coverstitch
-Max. sewing speed :6.500rpm
-Stitch length: 0.93.6mm (stitch length can be adjusted
to 4.5mm)
-Differential-feed ratio(switchable): 1:0.91:1.8 (1:0.61:1.1)
-Needle gauge :4.8mm 5.6, 6.4mm
-Needle UY128GAS: #9S#14S (standard #10S)
-Lift of the presser foot: 5mm (with top and bottom coverstitch), 8mm(with bottom coverstitch)
-Stitch pitch adjustment: By dial
-Differential feed adjustment: By micro-adjustment mechanism
-Lubrication: Automatic
-Lubricating oil: JUKI Machine Oil 18 (equivalent to ISO VG18)
-Micro-lifter: Provided as standard
-Needle bar stroke converting function :Provided as standard
-Silicon oil tank for needle tip and
needle thread :Provided as standard
-Cartridge oil filter: Provided as standard
-Weight of the machine head: 42kg
*Speed depends on thread, material and operation.
Applications
The machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear. It is not a specific-purpose model, but a basic one which can be used for a broader range of processes independently.
Features
The Juki MF-7900 series is newly launched and includes totally renewed seam quality functions and performance. The machine is able to sew almost all kinds of sewing products, such as foundations, light-weight underwear and heavy-weight fleece, increasing the number of sewing items. The machine produces seams, which match materials and thread with consistency.
Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high-grade well-tensed seams for outer wear.
The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top covering stitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread.
A differential-feed adjustment mechanism with a micro-adjustment mechanism to provide a constant differential-feed ratio. The differential-feed amount can be easily adjusted to the best suited value for the material to be used.
The machine comes with a variety of features to increase applicable types of sewing products.
Since the front and rear feed dogs are synchronized, the differential- feed ratio is constant, requiring no additional adjustment, even when the stitch length is changed.
Adjustment of the feed dog inclination can be carried out from outside with ease. The feed dog inclination adjustment mechanism works effectively to secure the material being sewn in place with increased reliability and thereby preventing uneven material feed and puckering.
The micro-lifter keeps the presser foot in a slightly raised position during sewing to help prevent problems such as slippage and deformation, or damages that can easily occur when sewing elastic materials.
The looper thread cam comes provided with a thread twining prevention mechanism.
Even if the thread twines around the looper thread cam, the cam can be easily detached for removal of the thread.
The well-balanced design of the machine achieves low-vibration and low-noise operation even under the high-speed mode.
This enables the operator to concentrate on sewing work in a more comfortable environment.
The machine is designed to use gauge components which are similar to commercially available ones.
This means that gauge components for the machine are readily available and can be replaced with little or no difficulty.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki MF7923UT video shows Under Bed Thread Trimmer which is not included on MF7923 without the UT suffixSee You Tube Videos on Juki MF7000 Series.
See Juki Japan Website for MF7900 Series Coverstitch Sewing Machines
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Juki MF-7923 U11 B64 UT57 Air Foot Lift Cylinder Bed Top Bottom 3Needle Coverstitch Machine, Under Trimmer, Legs with casters, Servo Motor, Table Top
|
Our Price: $5,699.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear. It is not a specific-purpose model, but a basic one which can be used for a broader range of processes independently.
Specifications
Model: Juki MF-7923
-A needle bar stroke conversion mechanism
-Looper thread twining prevention mechanism
-Stitch type :3-needle top and bottom coverstitch
-Max. sewing speed :6.500rpm
-Stitch length: 0.93.6mm (stitch length can be adjusted
to 4.5mm)
-Differential-feed ratio(switchable): 1:0.91:1.8 (1:0.61:1.1)
-Needle gauge :4.8mm 5.6, 6.4mm
-Needle UY128GAS: #9S#14S (standard #10S)
-Lift of the presser foot: 5mm (with top and bottom coverstitch), 8mm(with bottom coverstitch)
-Stitch pitch adjustment: By dial
-Differential feed adjustment: By micro-adjustment mechanism
-Lubrication: Automatic
-Lubricating oil: JUKI Machine Oil 18 (equivalent to ISO VG18)
-Micro-lifter: Provided as standard
-Needle bar stroke converting function :Provided as standard
-Silicon oil tank for needle tip and
needle thread :Provided as standard
-Cartridge oil filter: Provided as standard
-Weight of the machine head: 42kg
*Speed depends on thread, material and operation.
Applications
The machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear. It is not a specific-purpose model, but a basic one which can be used for a broader range of processes independently.
Features
The Juki MF-7900 series is newly launched and includes totally renewed seam quality functions and performance. The machine is able to sew almost all kinds of sewing products, such as foundations, light-weight underwear and heavy-weight fleece, increasing the number of sewing items. The machine produces seams, which match materials and thread with consistency.
Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high-grade well-tensed seams for outer wear.
The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top covering stitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread.
A differential-feed adjustment mechanism with a micro-adjustment mechanism to provide a constant differential-feed ratio. The differential-feed amount can be easily adjusted to the best suited value for the material to be used.
The machine comes with a variety of features to increase applicable types of sewing products.
Since the front and rear feed dogs are synchronized, the differential- feed ratio is constant, requiring no additional adjustment, even when the stitch length is changed.
Adjustment of the feed dog inclination can be carried out from outside with ease. The feed dog inclination adjustment mechanism works effectively to secure the material being sewn in place with increased reliability and thereby preventing uneven material feed and puckering.
The micro-lifter keeps the presser foot in a slightly raised position during sewing to help prevent problems such as slippage and deformation, or damages that can easily occur when sewing elastic materials.
The looper thread cam comes provided with a thread twining prevention mechanism.
Even if the thread twines around the looper thread cam, the cam can be easily detached for removal of the thread.
The well-balanced design of the machine achieves low-vibration and low-noise operation even under the high-speed mode.
This enables the operator to concentrate on sewing work in a more comfortable environment.
The machine is designed to use gauge components which are similar to commercially available ones.
This means that gauge components for the machine are readily available and can be replaced with little or no difficulty.
Specifications
Model: Juki MF-7923
-A needle bar stroke conversion mechanism
-Looper thread twining prevention mechanism
-Stitch type :3-needle top and bottom coverstitch
-Max. sewing speed :6.500rpm
-Stitch length: 0.93.6mm (stitch length can be adjusted
to 4.5mm)
-Differential-feed ratio(switchable): 1:0.91:1.8 (1:0.61:1.1)
-Needle gauge :4.8mm 5.6, 6.4mm
-Needle UY128GAS: #9S#14S (standard #10S)
-Lift of the presser foot: 5mm (with top and bottom coverstitch), 8mm(with bottom coverstitch)
-Stitch pitch adjustment: By dial
-Differential feed adjustment: By micro-adjustment mechanism
-Lubrication: Automatic
-Lubricating oil: JUKI Machine Oil 18 (equivalent to ISO VG18)
-Micro-lifter: Provided as standard
-Needle bar stroke converting function :Provided as standard
-Silicon oil tank for needle tip and
needle thread :Provided as standard
-Cartridge oil filter: Provided as standard
-Weight of the machine head: 42kg
*Speed depends on thread, material and operation.
Applications
The machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear. It is not a specific-purpose model, but a basic one which can be used for a broader range of processes independently.
Features
The Juki MF-7900 series is newly launched and includes totally renewed seam quality functions and performance. The machine is able to sew almost all kinds of sewing products, such as foundations, light-weight underwear and heavy-weight fleece, increasing the number of sewing items. The machine produces seams, which match materials and thread with consistency.
Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high-grade well-tensed seams for outer wear.
The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top covering stitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread.
A differential-feed adjustment mechanism with a micro-adjustment mechanism to provide a constant differential-feed ratio. The differential-feed amount can be easily adjusted to the best suited value for the material to be used.
The machine comes with a variety of features to increase applicable types of sewing products.
Since the front and rear feed dogs are synchronized, the differential- feed ratio is constant, requiring no additional adjustment, even when the stitch length is changed.
Adjustment of the feed dog inclination can be carried out from outside with ease. The feed dog inclination adjustment mechanism works effectively to secure the material being sewn in place with increased reliability and thereby preventing uneven material feed and puckering.
The micro-lifter keeps the presser foot in a slightly raised position during sewing to help prevent problems such as slippage and deformation, or damages that can easily occur when sewing elastic materials.
The looper thread cam comes provided with a thread twining prevention mechanism.
Even if the thread twines around the looper thread cam, the cam can be easily detached for removal of the thread.
The well-balanced design of the machine achieves low-vibration and low-noise operation even under the high-speed mode.
This enables the operator to concentrate on sewing work in a more comfortable environment.
The machine is designed to use gauge components which are similar to commercially available ones.
This means that gauge components for the machine are readily available and can be replaced with little or no difficulty.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki MF7923UT video shows Under Bed Thread Trimmer which is not included on MF7923 without the UT suffixSee You Tube Videos on Juki MF7000 Series.
See Juki Japan Website for MF7900 Series Coverstitch Sewing Machines
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Juki MH-1410B 2 Needle Feed, 1 3/8" Gauge, 4 Thread Chainstitch, Cylinder Bed Ind Sewing Machine, 2.1-6.4mm Stitch Length, PowerStand, 5000SPM AutoOil
 |
Our Price: $5,699.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
- High Speed
- Cylinderbed
- Needle Feed
- Double Chainstitch
- Automatic Lubrication
- Sewing Machine
MH-1410A: 31.8mm (1-1/4")
MH1410B: 34.9mm (1-3/8")
MH1410C: 38.1mm (1-1/2")
Click HERE for PDF File on Juki MH-1410
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- This new 4-needle unit provides excellent seam quality at high sewing speeds so that you can handle bulk amounts of stitching jobs
- Sews at up to 5,000 s.p.m. for attaching waistbands to jeans.
- Easy adjustment of stitch length and stitch pitch make using this machine simple and easy
- Fully automatic lubrication system so that you don't have to worry about forgetting to lube your machine
- Adjustable differential feed and simple looper threading
- Sewing speed: Max. 5,000 s.p.m.
- Stitch length: 2.1mm-6.4mm
- Needle gauge: 6.5mm + 25.4mm + 6.4mm (1/4" + 1" + 1/4")
- Needle system: DV×57 (#21) #18～#25
- Feed system: Needle Feed
- Stitch system: Chainstitch
- Presser foot lift: Max. 9mm
- Stitch adjustment: by push button (needle feed/bottom feed synchronized)
Click HERE for Juki Specks on MH-1420
Please review our Freight LTL shipping Policies
Juki TNU-243U Heavy Duty 16.5" LongArm Walking Foot Ind Sewing Machine TMU243U, 20mm Foot Lift, 15mm Stitch L, Assembled Power Stand 800SPM
 16969: Juki TNU-243U Heavy Duty 16.5" LongArm Walking Foot Sewing Machine/Stand |
Our Price: $9,999.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
The Juki TNU243U machine is optimally suited for the sewing of extra heavy-weigth materials such as tents, seat belts, and bag handles,
Semi-long Flat-bed, 1-needle, Lockstitch Machine with Large Shuttle-hook for Extra Heavy-weight Materials
The lifting range of the presser foot is as high as 20mm for smooth placement / removal of extra heavy-weight materials. The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products.
The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing product. The machine comes with a large shuttle-hook. This type of shuttle-hook helps to reduce the frequency of bobbin thread replacement and is best suited for the sewing of extra heavy materials sewn with lower-count threads. The lifting range of the presser foot is as high as 20mm for smooth placement/removal of extra heavy materials. Thanks to the TNU-243's unison-feed mechanism, the machine's higher feed efficiency guarantees the output of high-quality seams free from uneven material feed.
Semi-long Flat-bed, 1-needle, Lockstitch Machine with Large Shuttle-hook for Extra Heavy-weight Materials
The lifting range of the presser foot is as high as 20mm for smooth placement / removal of extra heavy-weight materials. The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products.
The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing product. The machine comes with a large shuttle-hook. This type of shuttle-hook helps to reduce the frequency of bobbin thread replacement and is best suited for the sewing of extra heavy materials sewn with lower-count threads. The lifting range of the presser foot is as high as 20mm for smooth placement/removal of extra heavy materials. Thanks to the TNU-243's unison-feed mechanism, the machine's higher feed efficiency guarantees the output of high-quality seams free from uneven material feed.
- Complete with assembled table, stand and motor
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Max. sewing speed 800rpm
- Max. stitch length 15mm
- Presser foot lift By knee: 20mm
- Alternating vertical movement 4～8mm
- Distance from needle to machine arm 420mm
- Needle 794 (Nm230) Nm130～Nm280 DY×3 #21～#28
- Thread #8～#0, B92～B207 Nm=30/3～15/3
Please review our Freight LTL shipping Policies
Juki TSC-461 Super Long Arm 37.5" Cylinder Bed Single Needle Feed Walking Foot Sewing Machine TSC461, 11mmSL, 20mmLift, & Pedestal Power Stand 650RPM
 31236: Juki TSC-461 Super Long Arm 37.5" Cylinder Bed Single Needle Feed Walking Foot Sewing Machine TSC461 |
Our Price: $19,999.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
This machine is capable of powerfully feeding the materials which cannot be smoothly fed by conventional machines.
It is equipped with a free space under the arm as wide as 950mm, which means that the machine is capable of sewing large materials, long-sized materials and tubular sewn products with ease.
The lift of the presser foot is high as 20mm.
The lifting amount of the presser foot is sufficient to sew extra heavy materials.
The machine is equipped with a built-in type bobbin winder which the operator can reach during sewing.
The machine comes with a large shuttle hook and large bobbin which have been exclusively designed for sewing extra heavy materials: these reduce the frequency of bobbin replacement. thereby leading to higher efficiency in sewing extra heavy materials using thick threads.
When compared with the conventional 45K bobbin, the amount of thread wound around the newly developed large bobbin is increased by 50%.
Applications: Carrying bags, transportation equipment. sporting goods.
It is equipped with a free space under the arm as wide as 950mm, which means that the machine is capable of sewing large materials, long-sized materials and tubular sewn products with ease.
The lift of the presser foot is high as 20mm.
The lifting amount of the presser foot is sufficient to sew extra heavy materials.
The machine is equipped with a built-in type bobbin winder which the operator can reach during sewing.
The machine comes with a large shuttle hook and large bobbin which have been exclusively designed for sewing extra heavy materials: these reduce the frequency of bobbin replacement. thereby leading to higher efficiency in sewing extra heavy materials using thick threads.
When compared with the conventional 45K bobbin, the amount of thread wound around the newly developed large bobbin is increased by 50%.
Applications: Carrying bags, transportation equipment. sporting goods.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Max. sewing speed: 650rpmMax. stitch length: 11mm (normal/reverse feed)
Needle bar stroke: 56mm
Lift of the presser foot: By hand: 12mm, By pedal: 20mm
Reverse feed stitching method: By lever
Thread take-up: Cam type thread take-up
Alternating vertical movement: 4 8mm
Hook: Large capacity shuttle hook
Needle (at the time of delivery): 794 (Nm230) Nm=130 Nm280
Thread #8 #0. 892 8277, Nm=30/3 8/3
Lubrication: By an oiler
Lubricating oil: JUKI New Defrix Oil No.1 (equivalent to ISO V37)
Bobbin winder: Built on the machine arm
Top-feed method: Interlocked with the bottom feed mechanism
Distance from needle to machine arm: 950mm
Click HERE for Juki Brochure on TSC-461
- Extra Heavy Duty 37 inch Long Cylinder- Bed
- Compound Needle Feed Walking Foot
- Stitching Machine for Leather, Webbing, Canvas,
- Filters and any Heavy Fabrics from about 1/16”
up to 7/8” thick with an adjustable stitch length lever
and reverse feed for back-tacking.
Juki Warranty Information
Juki TSH-471U 16.5" Longarm Unison Walking Foot Needle Feed Sewing Machine, Servo Motor Stand, 800SPM, 11mm Stitch for Heavy Materials
 91826: Juki TSH-411U 16.5" Arm Bottom Feed 12/20mm Foot Lift Sewing Machine/Stand for Heavy Materials |
Our Price: $9,699.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Special Order 90 to 120 days Non-refundble
The lifting range of the presser foot is as high as 20mm for smooth placement / removal of extra heavy-weight materials. The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products.
The lifting range of the presser foot is as high as 20mm for smooth placement / removal of extra heavy-weight materials. The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
TSH-441U1-needIe, Semi-long Cylinder Bed, Lockstitch Machine
with a Large Shuttle-hook for Extra-heavy-weight Materials
Max. sewing speed 800sti/min
Max. stitch length 11mm
Presser foot By pedal: 20mm
Alternating vertical movement 4～8mm (TSC-441U, TSU-471U)
Distance from needle to machine arm 420mm
Needle 794 (Nm230) Nm130～Nm280
Thread #8～#0, B92～B207 Nm=30/3～15/3
Juki TSC-441U 16.5" Arm Walking Foot Needle Feed Sewing Machine Video
Juki TSC-441U 16.5" Longarm Unison Walking Foot and Needle Feed Sewing Machine, Servo Space Saver Stand, up to 800SPM, 11mm Stitch for Heavy Materials
91826: Juki TSH-411U 16.5" Arm Bottom Feed 12/20mm Foot Lift Sewing Machine/Stand for Heavy Materials |
Our Price: $9,499.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Special Order 90 to 120 days non-refundable/
The lifting range of the presser foot is as high as 20mm for smooth placement / removal of extra heavy-weight materials. The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products.
The lifting range of the presser foot is as high as 20mm for smooth placement / removal of extra heavy-weight materials. The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
TSH-441U1-needIe, Semi-long Cylinder Bed, Lockstitch Machine
with a Large Shuttle-hook for Extra-heavy-weight Materials
Max. sewing speed 800sti/min
Max. stitch length 11mm
Presser foot By pedal: 20mm
Alternating vertical movement 4～8mm (TSC-441U, TSU-471U)
Distance from needle to machine arm 420mm
Needle 794 (Nm230) Nm130～Nm280
Thread #8～#0, B92～B207 Nm=30/3～15/3
Juki TSC-441U 16.5" Arm Walking Foot Needle Feed Sewing Machine Video
Kai KAI5100-SER KAI 4in Needlecraft Scissors Serrated
 |
Availability: Retail Store Only |
Features
The KAI 5100-SER 4-inch Micro-Serrated Scissors are a uniquely designed scissor. One of the blades has a micro-serrated edge that provides extra grip on even the most slippery and stubborn of fabrics, such as silks, satin and wool. Additionally, the KAI 5100-SER's micro-serrated blade is ideal for fusible appliqué and wool appliqué patterns and shapes when a precise cut is needed.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai GSP 3 Piece Serrated Patchwork Scissors Set
 |
Our Price: $64.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The KAI Serrated Set is a wonderful gift set for any person who likes to have extreme control over their cuts. Whether it is for a friend, family member, or even yourself, this is the premier gift set for those seeking out serrated scissors. A blade cover for each scissor is also included in every gift set.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
This set includes: 1 pair of N3120- 4 1/2in Serrated Patchwork, 1 pair of N3160- 6in Serrated Patchwork, and 1 pair of N3210- 8in Serrated PatchworkKai 5028 28 mm Rotary Cutter, Soft Comfort Hand Grip, Special Finger Grips
 |
Our Price: $16.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For Right or Left hand Use, Pressure Sensitive Blade, Natural hand grip with pressure sensitive blade, Universal grip for right or left handed use.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai 5028BL 28 mm Replacement Cutter Blades for 28 mm Rotary Cutter (2) Blades Per Pack
 |
Our Price: $6.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Japanese Made Tungsten Steel Blade, (2) Blades Per Package.
- Replacement Blade for Kai 28 mm Rotary Cutter
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Replacement Blade For 28 mm Rotary Cutter from Kai
Kai 5045 Handheld 45mm Rotary Blade Cutter Soft Comfort Grip Right/Left Hand
 |
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Natural hand grip with pressure sensitive blade. Universal grip for right or left handed use.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai 5045BL 45mm Blade for Handheld 45MM Rotary Cutter, Japan Tungsten Steel
 30952: Kai 5045BL 45mm Blade for Handheld 45MM Rotary Cutter, Japan Tungsten Steel |
Our Price: $9.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Japanese Made Tungsten Steel, (1) Blade Per Package
- Replacement Blade For Kai 45 mm Rotary Cutter
Non-US Warranty: 30 days parts and labor.
Kai 5045PBL 45 mm Rotary Cutter Pinking Blade (1) Per Package, Japanese Made Tungsten Steel Blade
 5045PBL |
Our Price: $7.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Japanese Made Tungsten Steel, (1) Blade Per Package
- Pinking Blade For Kai 45 mm Rotary Cutter
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai 5045wBL 45 mm Rotary Cutter Wavy Edge Blade (1) Per Package, Japanese Made Tungsten Steel Blade
 |
Our Price: $7.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Japanese Made Tungsten Steel, (1) Blade Per Package
- Wavy Edge Blade For Kai 45 mm Rotary Cutter
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai Japan 5100-B 4 Inch Bent Blade Curved Scissors, Thread Trimmers for Sewing, Embroidery and Needle Crafts
 Kai Japan 5100-B 4" Bent Scissors, Trimmers for Embroidery Needle Craft |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This is the Kai 5100b-p: blunt 4-inch bent handle scissors. The tips are perfect for Hardanger, cutwork, and cutting out button holes. It is also great for removing satin stitches from embroidery designs. The blunt tip helps to prevent the unintentional piercing of fabrics and sewers alike.
Additionally, we have added these scissors because of their popularity with Margaret Brewster Willingham of eye of the beholder.
As with all of our 5000 series scissors, the Kai 5100b-p's blades are made of a hardened, stainless steel. This allows for a smooth and precise cut, all-the-way to the tip.
Kai Japan 5100 Scissors Videos
Additionally, we have added these scissors because of their popularity with Margaret Brewster Willingham of eye of the beholder.
As with all of our 5000 series scissors, the Kai 5100b-p's blades are made of a hardened, stainless steel. This allows for a smooth and precise cut, all-the-way to the tip.
Kai Japan 5100 Scissors Videos
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai Japan 5100-C 4" Scissors Curved Tip Point for Needle Crafts, Embroidery, Applique, Sewing,
 13295: Kai Japan 5100-C 4" Scissors Curved Tip, Needle Crafts, Embroidery, Applique |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Kai 5100C: 4-inch Needle Craft (Curved Tip) Scissors have sharp, pointed, and curved tips that allow for flexibility in clipping jump stitches in embroidery designs, lettering, machine quilting, beadwork, and fly tying for fishermen.
The curved tips on the 5100C also aid in cutting away stabilizers from the back of embroidery projects and they are useful for appliqué projects as well.
The curved tips on the 5100C also aid in cutting away stabilizers from the back of embroidery projects and they are useful for appliqué projects as well.
- Hardened stainless steel blades
- Curved detailed tips for precise trimming
- Popular for trimming threads, machine embroidery, beadwork and fly tying
- Sharp, curved tips for clipping threads and trimming embroidery designs
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
The Kai 5100C: 4-inch Needle Craft (Curved Tip) Scissors have sharp, pointed, and curved tips that allow for flexibility in clipping jump stitches in embroidery designs, lettering, machine quilting, beadwork, and fly tying for fishermen.The curved tips on the 5100C also aid in cutting away stabilizers from the back of embroidery projects and they are useful for appliqué projects as well.
Kai Japan 5100 Scissors Videos
Kai Japan 7100 4-1/4" Professional Series Scissors for Embroidery and Thread Trimming
 Kai Japan 7100 4 1/4" Professional Series Scissor |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The KAI 7100 - 4 ¼” Professional Series scissor is ideal for tasks that require a small but powerful cutting tool. The high-carbon stainless steel blades provide extra-long edge life and high cutting efficiency. It also features handles made of "Elastomer", a soft plastic, which is designed for better leverage and ease of handling while cutting.
Additionally, as being the smallest of the 7000 series scissors, the 7100 is better suited for detailed tasks such as thread snipping, embroidery projects, Hardanger embroidery, beadwork, rug-hooking, appliqué projects, and fly tying to name a few.
Additionally, as being the smallest of the 7000 series scissors, the 7100 is better suited for detailed tasks such as thread snipping, embroidery projects, Hardanger embroidery, beadwork, rug-hooking, appliqué projects, and fly tying to name a few.
Non-US Warranty: 30 days parts and labor.
Kai Japan KAI5150 6 inch Rag Quilt Scissors
 |
Our Price: $22.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The KAI5150 is a multi-purpose scissor designed for Do-It-Yourself projects, hobbies, crafting, quilting, and sewing projects. It features a wire-stripper, as well as a micro-serrated edge that assists in cutting soft or slippery fabrics and other materials. The strong, high- carbon stainless steel blades, are also ideal for clipping rag quilts. They are versatile for short detailed cuts for rag look seam allowances. The actual cutting blades are thicker than most scissors of its size, and because of this, they can cut through thicker materials with ease. These KAI5150 scissors truly define what it means to be multi-purpose.
Non-US Warranty: 30 days parts and labor.
Kai 5135 Japan 5-1/2" Embroidery Craft Sewing Quilting Scissors, Thread Trimmers, Black Handles
 12770: Kai 5135 Japan 5-1/2" Embroidery Craft Sewing Quilting Scissors Trimmers |
Our Price: $17.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Quilters love this size for trimming “Dog Ears” and clipping threads when chain piecing. This smooth, comfortable size is perfect in your sewing kit for take along sewing projects and sewing classes. Kai shears are great for sewing and embroidery. Small black handle, with a 1.675"cut length and 5.5" in overall length.
Great Craft Shears
Flexible handles for comfort
Extremely powerful cut
Fully hardened blades may be sharpened many times
Great Craft Shears
Flexible handles for comfort
Extremely powerful cut
Fully hardened blades may be sharpened many times
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai 5165 Japan 6-1/2" Sewing & Craft Shears, Scissors, Thread Trimmers
 |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Cut length: 2 3/4"Kai KAI5125 Thread Snips
 99156: Kai KAI5125 Thread Snips |
Our Price: $12.99 Prices are subject to change, and only current prices will be honored. Availability: Retail Store Only Condition: New In Box |
Features
These KAI 5125 Thread Snips feature an ergonomically styled grip made of "Elastomer-Soft Plastic" for maximum comfort and handling. Using these makes thread snipping a breeze.
This makes them an ideal choice for use in sewing, quilting, tailoring, embroidery, dressmaking, and beyond.
** PLEASE Note: These are THREAD snips. They are not meant for cutting fabric.
This makes them an ideal choice for use in sewing, quilting, tailoring, embroidery, dressmaking, and beyond.
** PLEASE Note: These are THREAD snips. They are not meant for cutting fabric.
Non-US Warranty: 30 days parts and labor.
Kai 5210 Japan 8in Long Dressmaking Scissors Shears Bent Trimmers, 3in Cutting Length, Green Handle
 13285: Kai 5210 Japan 8" Dressmaking Scissors Shears Bent Trimmers 3" Cutting |
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
- Ergonomically soft handles, fatigue free cutting on all types of fabric
- Cuts multiple layers of denim with ease while trimming silks without any fabric slippage
- Standard size handle and blade length
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
These versatile, professional grade scissors are made ofhardened stainless steel with vanadium, hand polished and balanced
allowing for superior cutting action for quilting, crafting or dressmaking.
Soft ergonomic handle for fatigue-free cutting. A favorite in the sewing
and quilting industry
Kai 3210 Japan 8 Inch Micro Serrated Patchwork Scissors Shears Bent Trimmers, 3" Cutting Length
 90968: Kai 3210 Japan 8 Inch Micro Serrated Dressmaking Scissors Shears Bent Trimmers |
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Ergonomically soft handles, fatigue free cutting on all types of fabric
- Cuts multiple layers of denim with ease while trimming silks without any fabric slippage
- Standard size handle and blade length
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Serrated blades help grip the fabric on satin, silky, slippery fabrics. Excellent on cotton for cutting multiple layers of patchwork piecing.The eight inch 3210 is ideal for longer cuts and would be considered a standard length. The serrated teeth are considered a micro serration, not to be confused with a pinking blade. These versatile, professional grade scissors are made of
hardened stainless steel with vanadium, hand polished and balanced
allowing for superior cutting action for quilting, crafting or dressmaking.
Soft ergonomic handle for fatigue-free cutting. A favorite in the sewing
and quilting industry
Kai 5210-L Left Hand 8-1/2" Dressmaking Style Shears, 3-3/8" Cutting Length, Bent Soft Black Handle, Blades are made of AU6 Japanese Stainless Steel
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For Left Handed Use, The shear handles are ergonomically designed to place the hand in correct alignment for ease of cutting and are made of Santoprene®, a soft thermal rubber, that is chemically bonded to the blades to prevent contamination.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- For difficult to cut materials
- Food safe for cutting up poultry, meats, and vegetables(FDA approved dyes in handles)
- All fabrics, sewing, and trimming operations
- Household use (shears are dishwasher safe)
- Meets most hobby and craft needs
- Gardening and floral arrangements
- Typically last 2-3 times longer than other brands of Shears
Kai 5220 Japan 8-3/4in Dressmaker Scissors Shears Bent Trimmers 3-3/8in Cut Length, Right Handed Soft Green Santoprene Handles, Stainless Steel Blades
 2773: Kai 5220 Japan 8-3/4" Dressmaker Scissors Shears Bent Trimmers 3-3/8" Cut Length |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Durable AU6 Stainless Steel blades, Cuts 3 3/8" Fabrics, Ergonomic.
KAI Ergonomix shears are excellent scissors for all types of materials. The 5220 is a right handed shear with green handles. The soft Santoprene handles add to the comfort. They are made from a Japanese A-U6 stainless steel with a Rockwell hardness rating of around 56 and stainless steel hardware with a nylon lock nut. The handles are chemically bonded, will not come loose, and are food safe. The 5220 has an overall length of 8 3/4” with a cut length of 3 3/8”.
KAI Ergonomix shears are excellent scissors for all types of materials. The 5220 is a right handed shear with green handles. The soft Santoprene handles add to the comfort. They are made from a Japanese A-U6 stainless steel with a Rockwell hardness rating of around 56 and stainless steel hardware with a nylon lock nut. The handles are chemically bonded, will not come loose, and are food safe. The 5220 has an overall length of 8 3/4” with a cut length of 3 3/8”.
Non-US Warranty: 30 days parts and labor.
Specifications
This is the Kai 5220: 8 1/2-inch shear. It has ergonomically soft handles that allow for fatigue-free cutting on all types of fabric. The hardened stainless steel blades cut through multiple layers of denim with ease while trimming cottons without fabric slippage.It also features large handle grips and a standard blade length. Individuals with larger hands typically find this grip to be very comfortable.
Kai 5627 7 1/2 in Scissors
 |
Our Price: $21.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This is the KAI5627 - 7 1/2 in scissor. This is a great all-purpose shear that excels in cutting various materials and fabrics associated with crafting, sewing, and quilting projects. Additionally, it is popular for use with rubber stamping projects as well. Another unique feature of the KAI 5627 is its large handle design. The large handle design lends itself to premier comfort, and fatigue-free cutting. The KAI5627 has a one inch longer blade length. This allows for a greater cut length, while still maintaining the clean and effortless cut expected from a KAI blade. They are made of a hardened stainless steel. This allows the blades to keep their edge for longer, and gives them a smooth, sharp cut all the way to the tip.
Non-US Warranty: 30 days parts and labor.
Kai GSS S Series 3 Piece Set Scissors
 |
Our Price: $59.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The KAI S-Series Set includes our most popular scissors sizes. The S-Series was the precursor to the ever popular 5000, the main difference being hard plastic handles on the S-series and softer Elastomer handles on the 5000's. The smooth, sharp blades give the KAI scissors an amazing smoothness in cut and feel. Whether it is for a friend, family member, or even yourself, this is the premier gift set for those seeking out performance-level scissors. This set includes: 1 S-4 (4" Needle Craft Scissors): Sharp pointed tips allow for detailed cutting and trimming. Extremely popular for trimming threads, Hardanger embroidery, beadwork, rug hooking, and fly tying for fishermen. -1 S-5 (5 1/2" Scissors): Quilters love this size for trimming "dog ears" and clipping threads when chain piecing. This smooth, comfortable scissor is perfect in your sewing kit for take along projects and sewing classes. - 1 S-8 (8" Dressmaking Shears): These 8-inch scissors have ergonomically right handles which allow fatigue-free cutting on all types of fabric. Cuts multiple layers of denim with ease while trimming cottons without any fabric slippage.
Non-US Warranty: 30 days parts and labor.
Kai Japan J5220-L 8-1/2" Ergonomic Left Handed Dressmaking Scissors, Shears, Bent Trimmers, 3-3/8" Cutting Length, 3.2oz
 30938: Kai Japan J5220-L 8-3/4" LEFT Handed Dressmaking Scissors, Shears, Bent Trimmers |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
ETA 30 Days! 3 3/8" Cutting Length, Bent Soft Black Handle, AU6 Japanese Stainless Steel Blades, The shear handles are ergonomically designed to place the hand in correct alignment for ease of cutting and are made of Santoprene®, a soft thermal rubber, that is chemically bonded to the blades to prevent contamination.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Product DetailsThis is the KAI 5220L - 8 1/2 in Left-Handed Scissor. Left-handers love the feel of these scissors. Ergonomic grips allow for easy cutting without discomfort to your thumb. This is the best fabric scissor made for left handed users. Large handle grip and standard blade length. This differs from the True Left scissors, in that the blades are not reversed, but is made to fit comfortably in your left hand. (A right handed scissor with a left handed grip for fatigue-free cutting!) WEIGHT: 3.9 OUNCES
KAI 8 1/2 inch lefty dressmaking shears
- For difficult to cut materials
- Food safe for cutting up poultry, meats, and vegetables(FDA approved dyes in handles)
- All fabrics, sewing, and trimming operations
- Household use (shears are dishwasher safe)
- Meets most hobby and craft needs
- Gardening and floral arrangements
- Typically last 2-3 times longer than other brands of Shears
Kai Japan 5250 10in Dressmaker Scissors Shears Bent Trimmers 4-3/4" Cutting Length
 30935: Kai Japan 5250 10in Dressmaker Scissors Shears Bent Trimmers 4-3/4" Cut |
Our Price: $34.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The shear handles are ergonomically designed to place the hand in correct alignment for ease of cutting and are made of Santoprene®, a soft thermal rubber, that is chemically bonded to the blades to prevent contamination. The handles are also slightly larger than the 5210 for larger and gloved hands.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- For difficult to cut materials
- Food safe for cutting up poultry, meats, and vegetables(FDA approved dyes in handles)
- All fabrics, sewing, and trimming operations
- Household use (shears are dishwasher safe)
- Meets most hobby and craft needs
- Gardening and floral arrangements
- Typically last 2-3 times longer than other brands of Shears
Kai 5275 Japan 11" Stainless Steel Scissors Shears Bent Trimmer Cuts 4.75" for Fabrics and Upholstery, Soft Ergonomic Santoprene Handles, From JAPAN
 Kai 5275-FE Factory Edge 11" Bent Soft Shears |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai 626 Japan 6-1/4" Scissors Shears Trimmer, Embroidery Craft Sewing
 |
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai 626-7 Japan 7-1/2" Loop Handle Shears, Straight Scissors, Trimmers
 |
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Availability: ON BACKORDER Condition: New In Box |
Features
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai 7205 Japan 8" Best Dressmaker Scissors Shears Bent Trimmers, Heavy Duty Professional, Stainless Steel
 13289: Kai 7205 Japan 8" Best Dressmaker Scissors Shears Bent Trimmers |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
KAI 7000 series High-Carbon stainless steel shears—depend on an extra-long edge life and superior cutting efficiency.
The KAI 7205 8" Shear is made from high carbon, hardened stainless steel. The addition of carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge. Swedish blogger and author, Johanna Lu*, says the best way to describe KAI Scissors is “like cutting through butter”.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears are not a reinvention of the standard cutting implements—they are the next class of professional, must-have scissors. Designed to professional standards, these tailoring-style shears are perfect for clothing construction, perfect pattern cutting, and much more. Smooth cutting action, super sharp blades, and a comfortable fit make these the sharpest, most ergonomic fabric scissors available.
The entire shear is cut via laser out of high-carbon, maloybenum and vanamium stainless steel. What does this mean to you? This process, and these materials, ensure long-lasting sharp edges and a perfect balance. Equipped with a patented double-nut interlock blade fastener, the blades are designed to prevent the common loosening screw, maintain tightness of the tool, and adjust the blade tension. Furthermore, the shears present an elegant matte finish, and come with a tasteful elastomer cushioned handle, molded to fit your fingers for a perfect grip—just like the majority of their products.
The winner of the 2005 IF Design Aware, the shears are designed for all types of fabrics, such as acrylics, sheers, denim, silks, canvas, dacron and composite sail cloth, leather, fleece, culinary use, drapery fabrics, and upholstery.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears.
A flawless cut. An elegant fit. A perfected tool.
Note: This product, specifically, is the 7205 model. The distinction is that these are the 8"/205mm edition of the 7000 line, designed for ambidextrous (left and right-handed) use.
Kai 7000 Series—Product Brochure (.PDF)
KAI SCISSORS FOR SEWING – A REVIEW by Johanna Lu*
The KAI 7205 8" Shear is made from high carbon, hardened stainless steel. The addition of carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge. Swedish blogger and author, Johanna Lu*, says the best way to describe KAI Scissors is “like cutting through butter”.
Introducing the KAI 7000 Series High-Carbon Stainless Steel Shears
Progress to 0:37 for a thorough demonstration on cutting durable fabrics.The KAI 7000 Series™ High-Carbon, Stainless Steel Shears are not a reinvention of the standard cutting implements—they are the next class of professional, must-have scissors. Designed to professional standards, these tailoring-style shears are perfect for clothing construction, perfect pattern cutting, and much more. Smooth cutting action, super sharp blades, and a comfortable fit make these the sharpest, most ergonomic fabric scissors available.
The entire shear is cut via laser out of high-carbon, maloybenum and vanamium stainless steel. What does this mean to you? This process, and these materials, ensure long-lasting sharp edges and a perfect balance. Equipped with a patented double-nut interlock blade fastener, the blades are designed to prevent the common loosening screw, maintain tightness of the tool, and adjust the blade tension. Furthermore, the shears present an elegant matte finish, and come with a tasteful elastomer cushioned handle, molded to fit your fingers for a perfect grip—just like the majority of their products.
The winner of the 2005 IF Design Aware, the shears are designed for all types of fabrics, such as acrylics, sheers, denim, silks, canvas, dacron and composite sail cloth, leather, fleece, culinary use, drapery fabrics, and upholstery.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears.
A flawless cut. An elegant fit. A perfected tool.
Note: This product, specifically, is the 7205 model. The distinction is that these are the 8"/205mm edition of the 7000 line, designed for ambidextrous (left and right-handed) use.
- Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
- Full-length "blade-to-grip" design for optimal cutting balance.
- Novel duplex interlock screw for lasting blade tension.
- Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.
Kai 7000 Series—Product Brochure (.PDF)
KAI SCISSORS FOR SEWING – A REVIEW by Johanna Lu*
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7205 is the 8-inch professional scissor that is ideal for thicker, more difficult fabrics. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last.Length: 8" (205mm)
Edge: Smooth
Handedness: Right
Handle: Bent
Kai 7230 #1 Japan 9 Inch Heavy Duty Professional Bent Trimmers, Shears, Scissors, Stainless Steel
 13288: Kai 7230 Japan 9" Heavy Duty Bent Trimmers, Shears, Scissors, Stainless |
Our Price: $75.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
- Full-length "blade-to-grip" design for optimal cutting balance.
- Novel duplex interlock screw for lasting blade tension.
- Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.
Kai 7000 Series Product Brochure (.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7230 is the 9-inch professional scissor that is ideal for thicker, more difficult fabrics. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last. The Kai 7230 being a 9-inch, is considered a lighter scissor, yet long enough for standard sewing projects. Most people compare this scissor to the Kai 7250 10-inch scissor. When compared, the Kai 7230 is better suited to people with smaller hands or desire lighter weight.Length: 9" (230mm)
The KAI 7230 - 9" Professional Shear is ideal for thicker, more difficult fabrics. The 7000 Professional Series, including the 7230, are made of a high carbon, hardened stainless steel. The addition of carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge. The carbon allows the finer edge to last longer. This gives the 7000 series a better ability to cut thicker fabrics and allow for easier use.
The KAI 7230, being a 9", is considered a lighter shear, yet long enough for standard sewing projects. Most people compare this shear to the KAI 7250 10" shear. When compared, the KAI 7230 is better suited to people with smaller hands or desire lighter weight.
*NOTE: The difference between the KAI 7230 9" and KAI 7250 10" is that you gain the extra inch in the handle, not the blade
WEIGHT: 6.1 OUNCES
Kai 5350 9 Inch Pinking Shears Scissors Edge Trimmers
13288: Kai 7230 Japan 9" Heavy Duty Bent Trimmers, Shears, Scissors, Stainless |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The N5000 Series is made for professional but can be used by anyone. The blades are made of AUS6A stainless steel (1.8 -3.5 mm in thickness) and hardened up to 56+/-1 HRC. The scissors are satin finished and equipped with a tension adjustable screw made of brass for easy re-conditioning.
Strong and light pinking shears for even the toughest of projects. The comfortable and lightweight handle, as well as the stainless steel blades, make this a necessary addition to your collection.
The Kai 5000 Series scissors are made of a hardened stainless steel. The smooth, sharp blades gives these Kai scissors an amazing smoothness in cut and feel.
Strong and light pinking shears for even the toughest of projects. The comfortable and lightweight handle, as well as the stainless steel blades, make this a necessary addition to your collection.
The Kai 5000 Series scissors are made of a hardened stainless steel. The smooth, sharp blades gives these Kai scissors an amazing smoothness in cut and feel.
Non-US Warranty: 30 days parts and labor.
Specifications
The KAI 9" Pinking Shears are strong and light for even the toughest of projects The comfortable and lightweight handle, as well as the stainless steel blades, make this a necessary addition to your collection. Cloth edges that are unfinished will easily fray, the weave becoming undone and threads pulling out easily. The saw-tooth pattern does not prevent the fraying but limits the length of the frayed thread and thus minimizes damage. WEIGHT: 5.3 OUNCESKai N5350 8" Stainless Steel Pinking Shears Scissors Edge Trimmers
 Kai N5350 8" Stainless Steel Pinking Shears |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Cut all types of materials with the KAI® 8" Pinking Scissors. These scissors are equipped with a pinking edge designed to minimize damage of unfinished edges that tend to easily fray, weaves that come undone, and threads that pull out easily. The pinking edge can also be used for decorative cuts.
Non-US Warranty: 30 days parts and labor.
Specifications
- Pinking edge
- Straight Handle
- Recommended for light materials
- Great for home, retail, factory, or workroom use
- Stainless steel blades
- 8" overall length
Kai Japan 7240-AS 9.5" Serrated Blade, Scissors, Shears, Bent Trimmers
 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Commercial Heavy Duty Steel, Soft Handles, Even cuts through Kevlar! Heavy Duty Steel, Soft Handles, Even cuts through Kevlar! KAI 7000 series High-Carbon stainless steel shears—depend on an extra-long edge life and superior cutting efficiency.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears are not a reinvention of the standard cutting implements—they are the next class of professional, must-have scissors. Designed to professional standards, these tailoring-style shears are perfect for clothing construction, perfect pattern cutting, and much more. Smooth cutting action, super sharp blades, and a comfortable fit make these the sharpest, most ergonomic fabric scissors available.
The entire shear is cut via laser out of high-carbon, maloybenum and vanamium stainless steel. What does this mean to you? This process, and these materials, ensure long-lasting sharp edges and a perfect balance. Equipped with a patented double-nut interlock blade fastener, the blades are designed to prevent the common loosening screw, maintain tightness of the tool, and adjust the blade tension. Furthermore, the shears present an elegant matte finish, and come with a tasteful elastomer cushioned handle, molded to fit your fingers for a perfect grip—just like the majority of their products.
The winner of the 2005 IF Design Aware, the shears are designed for all types of fabrics, such as acrylics, sheers, denim, silks, canvas, dacron and composite sail cloth, leather, fleece, culinary use, drapery fabrics, and upholstery.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears.
A flawless cut. An elegant fit. A perfected tool.
Note: This product, specifically, is the 7240AS model. The distinction is that these are the 10"/240mm edition of the 7000 line, designed for ambidextrous (left and right-handed) use, the addition of a serrated edge to prevent fabric slippage, plus the features listed below.
Kai 7000 Series—Product Brochure (.PDF)
Introducing the KAI 7000 Series High-Carbon Stainless Steel Shears
Progress to 0:37 for a thorough demonstration on cutting durable fabrics.The KAI 7000 Series™ High-Carbon, Stainless Steel Shears are not a reinvention of the standard cutting implements—they are the next class of professional, must-have scissors. Designed to professional standards, these tailoring-style shears are perfect for clothing construction, perfect pattern cutting, and much more. Smooth cutting action, super sharp blades, and a comfortable fit make these the sharpest, most ergonomic fabric scissors available.
The entire shear is cut via laser out of high-carbon, maloybenum and vanamium stainless steel. What does this mean to you? This process, and these materials, ensure long-lasting sharp edges and a perfect balance. Equipped with a patented double-nut interlock blade fastener, the blades are designed to prevent the common loosening screw, maintain tightness of the tool, and adjust the blade tension. Furthermore, the shears present an elegant matte finish, and come with a tasteful elastomer cushioned handle, molded to fit your fingers for a perfect grip—just like the majority of their products.
The winner of the 2005 IF Design Aware, the shears are designed for all types of fabrics, such as acrylics, sheers, denim, silks, canvas, dacron and composite sail cloth, leather, fleece, culinary use, drapery fabrics, and upholstery.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears.
A flawless cut. An elegant fit. A perfected tool.
Note: This product, specifically, is the 7240AS model. The distinction is that these are the 10"/240mm edition of the 7000 line, designed for ambidextrous (left and right-handed) use, the addition of a serrated edge to prevent fabric slippage, plus the features listed below.
- Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
- Full-length "blade-to-grip" design for optimal cutting balance.
- Novel duplex interlock screw for lasting blade tension.
- Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.
Kai 7000 Series—Product Brochure (.PDF)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Length: 9.5" (240mm)Edge: Serrated
Handedness: Right
Handle: Bent
Kai Japan 7250-M-FE 10 Inch Professional SERRATED Blade Bent Trimmers, Scissors Shears, Soft Handles, 3-3/4" Cut
Kai Japan 7250-M-FE 10 Inch Professional SERRATED Blade Bent Trimmers, Scissors Shears, Soft Handles, 3-3/4" Cut |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Commercial Heavy Duty Steel, Soft Handles, Even cuts through Kevlar! Heavy Duty Steel, Soft Handles, Even cuts through Kevlar! KAI 7000 series High-Carbon stainless steel shears—depend on an extra-long edge life and superior cutting efficiency.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears are not a reinvention of the standard cutting implements—they are the next class of professional, must-have scissors. Designed to professional standards, these tailoring-style shears are perfect for clothing construction, perfect pattern cutting, and much more. Smooth cutting action, super sharp blades, and a comfortable fit make these the sharpest, most ergonomic fabric scissors available.
The entire shear is cut via laser out of high-carbon, maloybenum and vanamium stainless steel. What does this mean to you? This process, and these materials, ensure long-lasting sharp edges and a perfect balance. Equipped with a patented double-nut interlock blade fastener, the blades are designed to prevent the common loosening screw, maintain tightness of the tool, and adjust the blade tension. Furthermore, the shears present an elegant matte finish, and come with a tasteful elastomer cushioned handle, molded to fit your fingers for a perfect grip—just like the majority of their products.
The winner of the 2005 IF Design Aware, the shears are designed for all types of fabrics, such as acrylics, sheers, denim, silks, canvas, dacron and composite sail cloth, leather, fleece, culinary use, drapery fabrics, and upholstery.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears.
A flawless cut. An elegant fit. A perfected tool.
Note: This product, specifically, is the 7240AS model. The distinction is that these are the 10"/240mm edition of the 7000 line, designed for ambidextrous (left and right-handed) use, the addition of a serrated edge to prevent fabric slippage, plus the features listed below.
Kai 7000 Series—Product Brochure (.PDF)
Introducing the KAI 7000 Series High-Carbon Stainless Steel Shears
Progress to 0:37 for a thorough demonstration on cutting durable fabrics.The KAI 7000 Series™ High-Carbon, Stainless Steel Shears are not a reinvention of the standard cutting implements—they are the next class of professional, must-have scissors. Designed to professional standards, these tailoring-style shears are perfect for clothing construction, perfect pattern cutting, and much more. Smooth cutting action, super sharp blades, and a comfortable fit make these the sharpest, most ergonomic fabric scissors available.
The entire shear is cut via laser out of high-carbon, maloybenum and vanamium stainless steel. What does this mean to you? This process, and these materials, ensure long-lasting sharp edges and a perfect balance. Equipped with a patented double-nut interlock blade fastener, the blades are designed to prevent the common loosening screw, maintain tightness of the tool, and adjust the blade tension. Furthermore, the shears present an elegant matte finish, and come with a tasteful elastomer cushioned handle, molded to fit your fingers for a perfect grip—just like the majority of their products.
The winner of the 2005 IF Design Aware, the shears are designed for all types of fabrics, such as acrylics, sheers, denim, silks, canvas, dacron and composite sail cloth, leather, fleece, culinary use, drapery fabrics, and upholstery.
The KAI 7000 Series™ High-Carbon, Stainless Steel Shears.
A flawless cut. An elegant fit. A perfected tool.
Note: This product, specifically, is the 7240AS model. The distinction is that these are the 10"/240mm edition of the 7000 line, designed for ambidextrous (left and right-handed) use, the addition of a serrated edge to prevent fabric slippage, plus the features listed below.
- Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
- Full-length "blade-to-grip" design for optimal cutting balance.
- Novel duplex interlock screw for lasting blade tension.
- Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.
Kai 7000 Series—Product Brochure (.PDF)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7250 is the 10-inch professional scissor that is ideal for thicker, more difficult fabrics. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last. The 10-inch Kai 7250 is considered an ideal length for most sewing enthusiasts. Capable of cutting thicker fabrics with ease, the Kai 7250 meets almost all sewing project cutting needs.Length: 10"
Edge: Serrated
Handedness: Right
Handle: Bent
Kai Japan 7250 10" Professional Scissors Shears Bent Trimmers, Heavy Duty for Fabric, Drapery, Upholstery Materials Cutting
 13290: Kai Japan 7250 10" Scissor Shear Bent Trimmer, Heavy Duty Fabric Cutter |
Our Price: $73.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The KAI 7000 series High-Carbon stainless steel shears have an extra-long edge life and superior cutting efficiency. Designed for professional use, these tailoring style shears are ideal for clothing construction and for perfect pattern cutting. Excellent on all types of fabrics including: silks, cottons, denim, fleece, leather, tapestry, upholstery fabrics and drapery. Smooth cutting action and super sharp blades make these the sharpest fabric scissors available.
Includes Hardened Steel Blades, Soft Ergo Thermal Plastic Handle Inserts, Made in JAPAN, for Right and Left Hand Use The KAI 7000 series High-Carbon stainless steel shears have an extra-long edge life and superior cutting efficiency. Designed for professional use, these tailoring style shears are ideal for clothing construction and for perfect pattern cutting. Excellent on all types of fabrics including: silks, cottons, denim, fleece, leather, tapestry, upholstery fabrics and drapery. Smooth cutting action and super sharp blades make these the sharpest fabric scissors available.
Includes Hardened Steel Blades, Soft Ergo Thermal Plastic Handle Inserts, Made in JAPAN, for Right and Left Hand Use The KAI 7000 series High-Carbon stainless steel shears have an extra-long edge life and superior cutting efficiency. Designed for professional use, these tailoring style shears are ideal for clothing construction and for perfect pattern cutting. Excellent on all types of fabrics including: silks, cottons, denim, fleece, leather, tapestry, upholstery fabrics and drapery. Smooth cutting action and super sharp blades make these the sharpest fabric scissors available.
- Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
- Full-length "blade-to-grip" design for optimal cutting balance.
- Novel duplex interlock screw for lasting blade tension.
- Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.
Kai 7000 Series Product Brochure (.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7250 is the 10-inch professional scissor that is ideal for thicker, more difficult fabrics. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last. The 10-inch Kai 7250 is considered an ideal length for most sewing enthusiasts. Capable of cutting thicker fabrics with ease, the Kai 7250 meets almost all sewing project cutting needs.-
Length: 10" (250mm)
-
Edge: Smooth
-
Handedness: Right
- Handle: Bent
Kai Japan 7250-L True Left Hand 10 Inch Professional Scissors, Shears, Bent Trimmers, 3-3/4" Cut
 30931: Kai Japan 7250-L True Left Hand 10" Scissors, Shears, Bent Trimmers |
Our Price: $79.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The KAI 7000 series High-Carbon stainless steel shears have an extra-long edge life and superior cutting efficiency. Designed for professional use, these tailoring style shears are ideal for clothing construction and for perfect pattern cutting. Excellent on all types of fabrics including: silks, cottons, denim, fleece, leather, tapestry, upholstery fabrics and drapery. Smooth cutting action and super sharp blades make these the sharpest fabric scissors available.
Kai 7000 Series Product Brochure (.PDF)
Kai 7000 Series Product Brochure (.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
The KAI 7250L - 10 in True Left-Handed Professional Shear that is ideal for use on most sewing projects. A true left-handed scissor has a left-handed grip and its blades are reversed from that of a right-handed scissor. This allows a left-handed user to benefit from a more comfortable grip as well as a more precise cut. WEIGHT: 7.6 OUNCESLength: 10" (250mm)
Handedness: Left
Type: Tailoring Shears
What is the difference between left and right hand Scissors?
With left handed scissors, the blades are the other way round (the half that comes up when you open them is on the left), so that when cutting the blades are pushed together instead of apart like what would happen if a leftie used right-handed scissors. also, if the scissors have angled grips so your fingers are more comfortable and slide in better, those are the other way around as well (as your fingers are coming in from the other side.
Kai 7280 Japan 11 Inch Professional Tailor Scissors Shears Bent Trimmers, Heavy Duty Fabric Cutter, 5 Inch Cut
 13291: Kai 7280 Japan 11" Tailor Scissors Shears Bent Trimmer, Fabric Cutter |
Our Price: $79.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
The 7000 Series is a new generation of professional tailoring shears. The blades are made of AUS8A stainless steel (3.7 – 4 mm. in thickness) and hardened up to 58+/-1 HRC. The shears are elegantly matte finished and equipped with a patented duplex interlock fastener that prevents the screw from becoming loose. The fastener is also heat treated and hardened up to 45 +/- 1 HRC.
- Full metal handle underneath Santoprene soft thermal ergonimic black handle insert for comfort.
- Permanent Soft Thermal Plastic Insert
- Made of high-carbon Molybdenum Vanadium, high carbon stainless steel for extra long edge light and high cutting efficiency.
-Double-locking nuts for strength and tension
-Lightweight for comfort cutting
-Professionally diamond honed cutting edge
-Larger handles to reduce stress on hands
-Thicker blades for heavy duty cutting of materials
Kai 7000 Series Product Brochure (.PDF)
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7280 is the 11-inch professional scissor that is ideal for thicker, more difficult fabrics. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last.Length: 11" (280mm)
Edge: Smooth
Handedness: Right
Handle: Bent
Kai 7280-M Japan 11 Inch Professional Kevlar Serrated Scissors Shears Bent Trimmers, Heavy Duty Fabric Cutter, 5 Inch Cut
 90748: Kai 7280-M Japan 11" Kevlar Serrated Scissors Shears Bent Trimmer, Fabric Cutter |
Our Price: $109.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The 7000 Series is a new generation of professional tailoring shears. The blades are made of AUS8A stainless steel (3.7 – 4 mm. in thickness) and hardened up to 58+/-1 HRC. The shears are elegantly matte finished and equipped with a patented duplex interlock fastener that prevents the screw from becoming loose. The fastener is also heat treated and hardened up to 45 +/- 1 HRC.
- Full metal handle underneath Santoprene soft thermal ergonimic black handle insert for comfort.
- Permanent Soft Thermal Plastic Insert
- Made of high-carbon Molybdenum Vanadium, high carbon stainless steel for extra long edge light and high cutting efficiency.
-Double-locking nuts for strength and tension
-Lightweight for comfort cutting
-Professionally diamond honed cutting edge
-Larger handles to reduce stress on hands
-Thicker blades for heavy duty cutting of materials
Kai 7000 Series Product Brochure (.PDF)
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7280-M is the 11-inch professional scissor that is ideal for thicker, more difficult fabrics, including Kevlar. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last.Length: 11" (280mm)
Edge: Partial Serrated
Handedness: Right
Handle: Bent
Kai 5230 Japan 9'' Bent Trimmers Shears Scissors, Hard AU6 Steel Blades , 4" Cut Length Fabrics, Ergonomic Santoprene Soft Black Handles
 |
Our Price: $28.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
4" Cut Length Fabrics, Ergonomic Santoprene Soft Black Handles. Kai shears are great for sewing and embroidery. Black handle, with a 4"cut length and 9.25" in overall length.
- Excellent for all types of materials
- Soft Santoprene handles for comfort
- Durable A-U6 stainless steel blades
- Ergonomic handle design
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Kai Japan 7300 12" Bent Trimmers, Heavy Duty All Metal Commercial Professional Scissors Shears. Soft Handles, Thermal Plastic Insert. 5.5" Cut
 13292: Kai 7300 Japan 12"HD Heavy Duty All Metal Bent Trimmers, Scissors Shears |
Our Price: $89.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
- Full-length "blade-to-grip" design for optimal cutting balance.
- Novel duplex interlock screw for lasting blade tension.
- Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.
Kai 7000 Series Product Brochure (.PDF)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Made of a high carbon, hardened stainless steel, the Kai 7300 is the 12-inch professional scissor that is ideal for thicker, more difficult fabrics. The addition of Carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge that last. The carbon also allows the finer edge to be more durable, which in- turn, extends the cutting life of these professional scissors. It is also considered an ideal length for upholsterers and upholstery projects.Length: 12" (300mm)
Blade: Smooth
Handedness: Right
Handle: Bent
Kai 5240 Japan 9-1/2" Dressmaker Scissors, Shears, Bent Trimmers, 4" Cut Length, Durable A-U6 Stainless Steel Blades, Soft Green Santoprene Handles
 30933: Kai 5240 Japan 9-1/2" Dressmaker Scissors, Shears, Bent Trimmers |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The shear handles are ergonomically designed to place the hand in correct alignment for ease of cutting and are made of Santoprene®, a soft thermal rubber, that is chemically bonded to the blades to prevent contamination. The handles are also slightly larger than the 5210 for larger and gloved hands.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- For difficult to cut materials
- Food safe for cutting up poultry, meats, and vegetables(FDA approved dyes in handles)
- All fabrics, sewing, and trimming operations
- Household use (shears are dishwasher safe)
- Meets most hobby and craft needs
- Gardening and floral arrangements
- Typically last 2-3 times longer than other brands of Shears
Kai N3140S 5-1/2" Straight Soft Black Handle Scissor Shear with a 2-1/4" Cutting Length, Durable A-U6 Stainless Steel Blades, Ergonomic Handle Design
 30943: Kai N3140S 5-1/2" Straight Soft Black Handle Scissor Shears, 2-1/4" Cut Length |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The shear handles are ergonomically designed to place the hand in correct alignment for ease of cutting and are made of Santoprene®, a soft thermal rubber, that is chemically bonded to the blades to prevent contamination. The handles are also slightly larger than the 5210 for larger and gloved hands. The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- For difficult to cut materials
- All fabrics, sewing, and trimming operations
- Household use (shears are dishwasher safe)
- Meets most hobby and craft needs
- Gardening and floral arrangements
- Typically last 2-3 times longer than other brands of Shears
Kai N3160S, 6 1/4" Straight Soft Black Handle Shears with a 2-1/2" Cutting Length, Durable A-U6 Stainless Steel Blades, Ergonomic Handle Design
 30944: Kai N3160S, 6 1/4" Straight Soft Black Handle Shears with a 2-1/2" Cutting Length |
Our Price: $23.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The shear handles are ergonomically designed to place the hand in correct alignment for ease of cutting and are made of Santoprene®, a soft thermal rubber, that is chemically bonded to the blades to prevent contamination. The handles are also slightly larger than the 5210 for larger and gloved hands. The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- For difficult to cut materials
- All fabrics, sewing, and trimming operations
- Household use (shears are dishwasher safe)
- Meets most hobby and craft needs
- Gardening and floral arrangements
- Typically last 2-3 times longer than other brands of Shears
Kai Japan N5240 9-1/2" Dressmaker Scissors Shears Bent Trimmers 4" Cut
 30934: Kai Japan N5240 9-1/2" Dressmaker Scissors Shears Bent Trimmers 4" Cut |
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The shear handles are ergonomically designed to place the hand in correct alignment for ease of cutting and are made of Santoprene®, a soft thermal rubber, that is chemically bonded to the blades to prevent contamination. The handles are also slightly larger than the 5210 for larger and gloved hands.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- For difficult to cut materials
- Food safe for cutting up poultry, meats, and vegetables(FDA approved dyes in handles)
- All fabrics, sewing, and trimming operations
- Household use (shears are dishwasher safe)
- Meets most hobby and craft needs
- Gardening and floral arrangements
- Typically last 2-3 times longer than other brands of Shears
Kai N5250 10" Dressmaking Style Shears with a 4 3/4" Cutting Length, Black Handle, Durable A-U6 Stainless Steel Blades, Soft Santoprene Handles
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The shear handles are ergonomically designed to place the hand in correct alignment for ease of cutting and are made of Santoprene®, a soft thermal rubber, that is chemically bonded to the blades to prevent contamination. The handles are also slightly larger than the 5210 for larger and gloved hands.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
The blades are made of AU6 Japanese stainless steel with Vanadium giving them a Rockwell of 54 to 58 HRC. The shear blades are held together with a hex nylon-insert locknut that keeps the shears tight to prevent them from loosening up during use.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- For difficult to cut materials
- Food safe for cutting up poultry, meats, and vegetables(FDA approved dyes in handles)
- All fabrics, sewing, and trimming operations
- Household use (shears are dishwasher safe)
- Meets most hobby and craft needs
- Gardening and floral arrangements
- Typically last 2-3 times longer than other brands of Shears
Naomoto Japan AE50 Electric Iron 220V Thermostat, No Steam, Tuffram Soleplate
 |
Our Price: $1,399.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Suitable for Inter-lining pressing
Smooth out the wrinkles only by the power of heat! (Steam does not come out)
Electric thermostat gives you ultra fine temperature control. You can adjust the temperature depending on the materials.
Precise temperature control
A combination both Electronic Thermostat(N-89S/ST/W) and Heater Element gives precise temperature control ±1.5℃(3゜F) and energy efficiency
Tuffram finish iron sole
A Teflon injected Iron sole makes smooth and easy ironing with long life.
Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.
Naomoto Standard Comfort
Smooth out the wrinkles only by the power of heat! (Steam does not come out)
Electric thermostat gives you ultra fine temperature control. You can adjust the temperature depending on the materials.
Precise temperature control
A combination both Electronic Thermostat(N-89S/ST/W) and Heater Element gives precise temperature control ±1.5℃(3゜F) and energy efficiency
Tuffram finish iron sole
A Teflon injected Iron sole makes smooth and easy ironing with long life.
Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.
Naomoto Standard Comfort
- Molded Urethane Handle
- Open End Handle
- Heat Shield
- Excellent Weight Balance
- Fine Steam Volume Control
Please note 220V is NOT a standard plug for normal household use.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Voltage: 220VWattage: 950W
Weight: 1.3kg (2.8 lbs)
Machine Dimension: 200mm×115mm
Sole Finishing: Tuffram
Naomoto CDP–420 Electric Steam Iron Head Only for Boilers, 500W, Made in Japan
 28174: Naomoto CDP–420 Electric Steam Iron Head Only, 500W, Made in Japan |
Our Price: $1,599.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Electric Irons available 110V or 220V.
CDP-420 iron sold complete with two-in-one hose system.
CDP-420 iron sold complete with two-in-one hose system.
- For under-pressing and european style final-pressing
- Complete with two-in-one hose system.
- NAOMOTO SUPER CD TECHNOLOGY, Enables the excellent ironing with wide range temperature and for any kinds of fabric.
- Even if the ironing at low temperature (110℃，230゜F） is required, it is possible to iron without wearing Shoe and worrying about condensation drops forever.
- Excellent steam and heat make wrinkles smoothed out in no time.
- User friendly product - Drainage and water feeding hose are combined into one hose.
- You can easily and finely adjust the steam volume by swing lever, push lever and feather touch type switch.
2-in-1 Hose system
A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering.
Precise temperature control
A combination both Electronic Thermostat(N-89S/ST/W) and Heater Element gives precise temperature control ±1.5℃(3゜F) and energy efficiency
Tuffram finish iron sole
A Non Stock PTFE injected Iron sole makes smooth and easy ironing with long life.
Naomoto Standard Comfort
- Molded Urethane Handle
- Open End Handle
- Heat Shield
- Excellent Weight Balance
- Fine Steam Volume Control
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Voltage: 120V/220VWattage: 500W
Machine Dimension: 204mm×94mm
Weight: 1.7kg (3.7 lbs)
Sole Finishing: Tuffram
Naomoto FB-8S Utility Vacuum Table Heated Ironing Board +FB8S Cover +Pad +Catch Tray +HYS410P Variable Steam Iron +PS1 Water Pump Steam Volume Control
 9894: Naomoto FB-8S Utility Vacuum Self Contained Heated Ironing Board FB8S Cover +Pad +HYS-410P Variable Steam Iron +PS-1 Water Pump w/Steam Volume Control |
Our Price: $3,999.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
- Self-contained vacuum
- Complete with pump iron and pump assembly
- Instant plug-in use
- Functions vacuum while ironing
- Vacuum foot control table
- Weight 75 pounds or 33 kilos
- Dimensions 1235×385×870mm
NAOMOTO SUPER CD TECHNOLOGY, Enables the excellent ironing with wide range temperature and for any kinds of fabric.
Even if the ironing at low temperature is required, it is possible to iron without wearing Teflon Shoe and worrying about condensation drops forever.
Excellent steam and heat make wrinkles smoothed out in no time.
User friendly product - Drainage and water feeding hose are combined into one hose.
You can easily and finely adjust the steam volume by swing lever, push lever and feather touch type switch.
- 110V 1PH or 220V 1PH
-
Handle with Steam On/Off switch and front open-end design
Handle is made of urethane that allows sure grip. It is also de-signed to fit even in lady's hand. Open-front handle allows ease of ironing hard-to-reach places like cuffs and other tiny areas. And it also enables prompt press works.
-
Heat Protector
This made of heat-resistant materials to protect operator's hand from the heat radiated by iron.
-
Steam volume control dial
When ironing thicker fabrics and sweaters larger volume of steam-flow is required. By dial, you can regulate steam-flow volume freely as pressing material demands.
-
Sole plate
Teflon coated bottom surface makes ironing works quite smooth as if sliding on fabrics, and this also prolongs its service life.
-
Thermostat temperature control dial
NAOMOTO'S unique IC electronic thermostat is equipped on the iron. It has extremely long service-life and regulates temperature with precision of only 2 degree celcius allowance.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Self-contained model includes HYS-410P pump iron with water tank for instant plug-in use.- Model: FB-8S
- Voltage: 110v or 220v
- Iron 1000W
- Motor output 65W
- Pump motor 10w
- Work area 1045x200x385mm
- Dimensions W1235xD385xH870mm
- The complete pump assembly includes the tank
- Weight and dimensions for the PS-2 pump assembly only is: 13”x13”x13” 9 lbs
- Voltage
110v/220v
- Iron
1000W - Motor output
65W - Pump motor
10w - Work area
1045x200x385mm - Dimensions
W1235xD385xH870mm
HYS Pump Iron
Without any steam generator, you can easily start ironing wherever you want if only an electric power supply is available. It is suitable for Tailor shop, boutiques and also garment factory.
- Model: HYS-410P
- Voltage: 110V or 220V
- Wattage: 1000W
- Iron Base Dimension: 203x95mm
- Weight 1.8kg
- Iron Base
- Tuffram Coating
Naomoto Japan HSL 620 All Steam Boiler Iron Head Only 1.8kb, 2in1 Hose System, made in Japan
 24049: Naomoto Japan HSL 620 Steam Boiler Iron Head Only, 2in1 Hose System |
Our Price: $839.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
2-in-1 Hose system
A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering.
Tuffram finish iron sole
A Non Stick PTFE injected Iron sole makes smooth and easy ironing with long life.
Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.
NAOMOTO STANDARD COMFORT
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control
Hard chrome finish iron sole
The best seller "All Steam Iron" HS series proves the endurance and the reliability.
A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering.
Tuffram finish iron sole
A Non Stick PTFE injected Iron sole makes smooth and easy ironing with long life.
Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.
NAOMOTO STANDARD COMFORT
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control
Hard chrome finish iron sole
The best seller "All Steam Iron" HS series proves the endurance and the reliability.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Machine Dimension: 202mm×141mmWeight: 1.8kg
Sole Finishing: Hard Chrome
Naomoto HSP 320 All Steam Iron Head Only for 2 in1 Boiler Hose System ETA January 2023
 24050: Naomoto HSP 320 All Steam Iron Head Only for 2 in1 Boiler Hose System |
Our Price: $1,099.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
2-in-1 Hose system
A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering.
Tuffram finish iron sole
A PTFE Non Stick injected Iron sole makes smooth and easy ironing with long life.
Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.
NAOMOTO STANDARD COMFORT
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control
Hard chrome finish iron sole
The best seller "All Steam Iron" HS series proves the endurance and the reliability.
A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering.
Tuffram finish iron sole
A PTFE Non Stick injected Iron sole makes smooth and easy ironing with long life.
Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.
NAOMOTO STANDARD COMFORT
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control
Hard chrome finish iron sole
The best seller "All Steam Iron" HS series proves the endurance and the reliability.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Machine Dimension: 190mm×60mmWeight: 1.06kg
Sole Finishing: Hard Chrome
Naomoto HSP 420 Steam Boiler Iron Head Only for 2in1 Hose System (Your Boiler) Tuffram Teflon Hard Chrome Iron Sole Finish, Heat Shield, 1.3Kg, 2.2Lb
 |
Our Price: $839.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
2-in-1 Hose system
A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering.
ITS System
A mechanism, which prevents condensation in the iron chamber, offers a superior performance in your ironing.
Tuffram finish iron sole
A Teflon injected Iron sole makes smooth and easy ironing with long life.
Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.
NAOMOTO STANDARD COMFORT
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control
Hard chrome finish iron sole
The best seller "All Steam Iron" HS series proves the endurance and the reliability.
A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering.
ITS System
A mechanism, which prevents condensation in the iron chamber, offers a superior performance in your ironing.
Tuffram finish iron sole
A Teflon injected Iron sole makes smooth and easy ironing with long life.
Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.
NAOMOTO STANDARD COMFORT
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control
Hard chrome finish iron sole
The best seller "All Steam Iron" HS series proves the endurance and the reliability.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Iron Head Only, you must have an exisiting boiler system to attach this iron headMachine Dimension: 203mm×100mm
Weight: 1.3kg
Sole Finishing: Hard Chrome Coating
Naomoto HSP-410 All Steam Iron for Your Boiler, Non Electric, 2 Hoses
 28170: Naomoto HSP-410 All Steam Iron for Your Boiler, Non Electric, 2 Hoses |
Our Price: $699.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Complete with iron rest and hoses.
* Ultra light-weight
* Ergonomic design
* Includes 2 steam hoses & iron rest
* Steam valve heat shield
* Radiused base for smoother ironing and no leave off marks
* Ultra light-weight
* Ergonomic design
* Includes 2 steam hoses & iron rest
* Steam valve heat shield
* Radiused base for smoother ironing and no leave off marks
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Worlds most preferred industrial All-steam iron• No electrical components to break down
• Welded Stainless steel construction
• Adjustable condensate return valve
• Thermo-tech jacket keeps hands cool
• Supplied with 2 high pressure hoses
and a silicon iron rest.
Naomoto HYS-5 Silicone Covered Hard Metal Iron Rest, Part 1352101 Also for HYS 520 & HYS58 Gravity Feed Steam Irons
 |
Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This item is not sold separately and may only be purchased with a Naomoto HYS 520 Iron.
Non-US Warranty: 30 days parts and labor.
Naomoto HYS-5 Silicone Hot Iron Rest (soft) Part 1352108, Also for HYS 520 & HYS58 Gravity Feed Steam Irons
 |
Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This item is not sold separately and may only be purchased with a Naomoto HYS 520 Iron.
Non-US Warranty: 30 days parts and labor.
Naomoto HYS-58 Gravity Feed Steam Iron Japan, Water Bottle, Demineralizer, Iron Rest, Heat Shield, Weight 5 Pounds, 880W, 80PSI
 2730: Naomoto HYS58 Gravity Feed Steam Iron with Demineralizer 5Lbs, Japan |
Our Price: $999.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Note: Optional Iron Shoe is only available at time of order due to minimum order value requirements from vendor. Naomoto Iron Shoe #2 for HYS 58 Gravity Feed Steam Iron Prevents Scorching Shinning Garments & Fabrics
The HYS-58 quickly generates its own steam using only tap water. A special filter resin prevents clogging. New Conex heat canopy deflects heat rise, keeping handle cool. Temperature control is accurate to 2 degrees. Safe for any fabric. Comes complete with water tank, filter resin, water hose and iron rest.
The HYS-58 quickly generates its own steam using only tap water. A special filter resin prevents clogging. New Conex heat canopy deflects heat rise, keeping handle cool. Temperature control is accurate to 2 degrees. Safe for any fabric. Comes complete with water tank, filter resin, water hose and iron rest.
- Electric Micro-Switch Operation
- Water Bottle Feed
- Weight 4.18 lbs. 900W
- Complete with water bottle, filter resin - 1lb. Bag, cleaning kit, and iron rest
- New steam chamber for easy cleaning
- Liquid type sensor thermostat
- Urethane grip handle
- Heat Shield
- Light touch microswitch
- Tuffram sole coating
- One piece chamber & solepate
How to use the Naomoto Industrial Steam Iron Video
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Specially designed for use in garment factory, laundry and dry cleaners, apparel and alteration stores, boutiques, department stores, hotels, hospitals, etc.
- Easy, precise steam volume control with micro-switch operation
- Ergonomic design with contoured handle to fit your hand
- Wood handle is designed to fit the human hand and has natural insulation properties for operator comfort
- Gently beveled soleplate makes smooth, easy ironing with no marking or tracking
- Temperature control using a liquid sensor thermostat for percision and accuracy
- Flush temperature dial is flush with the surface of the rear plate for finger light temperature adjustments
- Heat shield improved non-woven Nomex material protects the hand from heat up to 280 degrees Celsius
- Excellent visibility with complete open end handle design allows the user to see the point of the iron at all times
- Iron safely without watering at lower temperatures and pressures (20 - 80 psi, 1.5 - 5.5 bar) allows you to iron under the best conditions to prevent fabric damage
- Extremely energy efficient
- New hard nickel coating means smoother ironing with less resistance, ironing surface cleans easily with just a cloth, and there's no Teflon non stick shoe required!
- Soleplate: Hard nickel
- Electrical: 110/220 V, 880 Watts
- Weight: 3.74 lbs to 5.5 lbs
- HYS58 Iron head is 4.8 pounds
Naomoto HYS-58 Manual (.pdf)
How to Use a Gravity Feed Iron
steam generator or gravity-feed iron on PatternReview.com
Gravity Feed Irons by NancyKsews.com
Cool Tool: Gravity Feed Iron in ThreadsMagazine.com
Naomoto HYS5 3Pk Demineralizer Filter Bags of Resin for Gravity Feed Irons
 |
Our Price: $129.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Naomoto HYS-5 Demineralizer Filter Resin QTY 3
Non-US Warranty: 30 days parts and labor.
Naomoto Iron Shoe #2 Aluminum Soleplate, Coil Spring, for HYS 58
 |
Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Iron Shoe is Shown to Right of Iron for Illustration. Only orderable with Naomoto HYS58 Gravity Feed Steam Iron, because of manufacturer's minimum order value requirements.
This item is not sold separately and may only be purchased with a Naomoto HYS 58 Iron.
This item is not sold separately and may only be purchased with a Naomoto HYS 58 Iron.
Non-US Warranty: 30 days parts and labor.
Naomoto Japan HYS410P Electric Hot Iron 800W, 110V Power Cord, and Hose with PS-2PU Pump Water Tank to Iron with Steam Volume Control
 30114: Naomoto Japan HYS410P Electric Hot Iron, Power Cord, and Hose with PS-2PU Pump |
Our Price: $1,649.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Without using a separate steam generator, you can easily start pump ironing with steam wherever you want if only an 110V electric power supply is available.
It is suitable for small factories, boutiques and also garment factory.
You can use the irons for professional use at home.
It is possible to iron with steam only by setting up the water tank or electric mobile water pomp.
Precise temperature control
A combination both Electronic Thermostat(N-89S/ST/W) and Heater Element gives precise temperature control and energy efficiency.
Tuffram finish iron sole
A Teflon injected Iron sole makes smooth and easy ironing with long life.
Naomoto Standard Comfort
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control
It is suitable for small factories, boutiques and also garment factory.
You can use the irons for professional use at home.
It is possible to iron with steam only by setting up the water tank or electric mobile water pomp.
Precise temperature control
A combination both Electronic Thermostat(N-89S/ST/W) and Heater Element gives precise temperature control and energy efficiency.
Tuffram finish iron sole
A Teflon injected Iron sole makes smooth and easy ironing with long life.
Naomoto Standard Comfort
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Naomoto’s solution to a gravity feed iron that does not require hanging a water tank above the iron for gravity. This iron is a pump driven tank HYS410/520PThe PS-2 pump also has a steam volume control.
The iron also makes steam like the iron above and features an electronic thermostat for temperature ranges of +/- 4° F
-
Voltage: 120V
-
Wattage: 800W
-
Dimensions: 203mm×95mm (7.99" x 3.74")
-
Weight: 1.8kg (3.96 lbs)
-
Sole Finishing: Tuffram
Naomoto Steam/Electric Iron HYS-P Series Brochure
Click here to view the manual for this product (.pdf)
Naomoto Japan HYS-520 Electronic Gravity Feed Iron 880W, 5Lb, Heat Shield ETA 3 to 6 months
 2729: Naomoto Japan HYS-520 Electronic Gravity Feed Steam Iron PTFE Non Stick Soleplate |
Our Price: $1,399.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Note: Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models.
Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.
Gravity feed irons sold complete with water bottle, cleaning kit, filter resin, and iron rest.
Naomoto HYS-520 HY-STEAM Series Gravity Feed Bottle Iron Brochure
Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.
Gravity feed irons sold complete with water bottle, cleaning kit, filter resin, and iron rest.
Naomoto HYS-520 HY-STEAM Series Gravity Feed Bottle Iron Brochure
- 880 Watts
- Electronic Thermostat Temperature Control
- Electric Micro-Switch Operation
- Water Bottle Feed Iron
- Temperature control
- Weighs only 5 pounds 880W
- Complete with water bottle, filter resin - 1lb. Bag, cleaning kit, and iron rest
- Urethane grip handle
- Heat Shield
- Light touch microswitch
- Hard nickel & PTFE fiberglass sole coating
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
This is Naomoto’s top performing gravity feed iron that requires a water tank to be hung from above the iron at a minimum of 2-3 feet above the iron.allowing a solenoid valve to release water into the iron to make steam.
It also features an electronic thermostat for temperature ranges of +/- 4° FHow to Use a Gravity Feed Iron
What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor
steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com
steam generator or gravity-feed iron on PatternReview.com
Gravity Feed Irons by NancyKsews.com
Cool Tool: Gravity Feed Iron in ThreadsMagazine.com
Nifty Notions 6505 Olympus Sashiko Needles Longer, Traditional Needles from Japan, Pack of 2
 |
Our Price: $6.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Longer, traditional needles from Japan. 2 needles per package.
Non-US Warranty: 30 days parts and labor.
Nifty Notions 7771 Olympus Sashiko Thimble
 |
Availability: Usually leaves the warehouse in 2-3 business days. |
Features
*Available in Stores Only*
Click Here to Contact an AllBrands Location Near You!
Click Here to Contact an AllBrands Location Near You!
Non-US Warranty: 30 days parts and labor.
Olfa SCS-2 7" Serrated Edge Stainless Steel Scissors from Japan
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
7" stainless steel scissors are ideal for consumer and industrial applications. High quality stainless steel blades meet perfectly for precision cutting. The material being cut is held in place by one blade which is slightly serrated providing maximum control. Scissors so sharp, they can cut through electrical wiring, plastic, aircraft composites, Kevlar® and more. Excellent for cutting multiple layers of fabric. Perfect for rag flannel quilting! High quality stainless steel blades meet perfectly for precision cutting all the way to the tip.,Serrated edge holds the material being cut in place providing maximum control.,Excellent for cutting multiple layers of fabric!
Good For: cutting paper, fabrics, plastic, rubber, aircraft composites, etc.
Good For: cutting paper, fabrics, plastic, rubber, aircraft composites, etc.
Non-US Warranty: 30 days parts and labor.
Organ 1000 DBxK5 Chrome Commercial Embroidery Machine Needles Size 11* for Brother 1201, Melco, Happy, Ricoma, Tajima, Baruden, Toyota, SWF, ZSK, MB4
 |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
*For Brother 901 1201, Melco Amaya Bravo & EP4, Janome MB4, Tajima, Baruden, Toyota, SWF Sunstar, Happy Texmac, Highlead, Renaissance, Ricoma, Prodigy, Generation, Meistergram, Etc. Specify Size 11*
Needle Comparison Chart
Needle Comparison Chart
- Available in sizes 8, 9, 10, 11, 12, 14, 16, 18, 19, 20
- These are round shank needles only for commercial and industrial embroidery machines, not flat shank needles whice home embroidery machines require.
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 needles work with industrial embroidery machines that take round shank needles such as Tajima, SWF Sumstar, ZSK Germany, Barudan, Melco, Amaya, Bravo, Happy, Janome MB4 EP4, Toyota, Brother 901 1201, Highlead, Renaissance, Ricoma, Generation, Meistergram, Etx.Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
Diamond Organ YJ50-W9 Replacement Cutting Blade Hexagonal 6 Sided, for YJ50 Cloth Cutting Machine
 |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
6-sided replacement blade for the YJ50 Cloth Cutting Machine
Non-US Warranty: 30 days parts and labor.
Suprena Japan HC-1005A-C Electric 2" or 50mm Rotary Blade Shear Cutter Cutting Machine, Cuts up to 1/4" Thick
 |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
World-wide best seller, lightweight mini cutter. Available for small radius curved cutting without any slippage. Built-in Automatic Sharpener. Small hand held cloth cutting machine with round knife blade and carbide tipped bottom blade for scissor like precision cutting.
- Small 50mm round blade.
- Stationary carbide counter blade for fine cutting.
- Built-in one touch automatic blade sharpener.
- Double insulated motor for electrical protection.
- Easy hand grip for better cutting manoeuvrability.
- Micro switch hand lever for easy operation.
- The HC-1005A-C is not the cheapest hand held cutter on the market, (nor the most expensive) but year after year it remains the same. Customers around the globe know that the HC-1005A-C is the standard by which all other handhelds are measured.
- If you are looking for a great little cutting machine to add to your tools, let us introduce you to the HC-1005A-C. This dynamo is suitable for a wide range of fabrics, and can cut up to 1/4" of fabric.
- The HC-1005A-C is a tough machine, ready for all day use. Cut from a single ply of fabric for samples all the way up to 1/4" thick for production without a problem.
- Standard features include a one-touch sharpener, stationary carbide and counter blade, and a double insulated motor.
Best used for:
- Light to medium weight fabrics
- Woven and knit fabric
Features:
- One-touch sharpener
- Stationary carbide and counter blade
- Double insulatged motor
- Lightweight and ergonomic design
Suprena HC-1005AThis electric MINI CUTTER provides a most powerful and amazingly fastest cutting performance, having many distinguished features such as:
recessed sharp for total visibility, double insulated motor, one-touch sharpener, carbide stationary counter cutting blade, build in lubricator,lightweight and different type of knifes. Maximum cutting hight is 8mm (5/16") depending on type of materials. Lays should not be higher than it's height.
Video from Australia is Model 1007A with 220V. Ours is 1005A with 110V
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Model Number: HC-1005A-C
- 1/110V
- 2-1/2" (63.5mm) Round Blade
- Cutting Capacity: 1/4" (25 mm)
- Weight: 2.5 lbs (1.13kg)
- Sharpening Mechanism: single stone (spring loaded)
- Lubrication: manual
Tajima TTG 200-10 Thread Tension Gauge TTG-CM76907 for Sewing Machine Bobbin Cases or Top Thread Tension Testing for Grams of Pull from 0 to 250 grams
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Measures Top and Bobbin Thread Tensions for All Home & Industrial Machines, regardless of bobbin size or no bobbin at all. So it will work for all your sewing, quilting, embroidery, serger and blindstitch machines.
This upper thread tension gauge is a great tool for finding and setting consistent thread tensions on your top threads! This thread gauge allows an embroiderer to adjust top embroidery thread tension. The Tajima thread tension gauge will work with both commercial and home embroidery machines. The thread tension gauge is hooked to the top thread from the presser foot and by pulling on the thread the embroiderer can determine the tension the embroidery machine is exerting on the thread. The embroiderer can then adjust top tension until the desired level of tension has been attained. This simple to use pen type tension gauge is suitable for both top thread and bobbin thread tension settings.
User guide settings:
This upper thread tension gauge is a great tool for finding and setting consistent thread tensions on your top threads! This thread gauge allows an embroiderer to adjust top embroidery thread tension. The Tajima thread tension gauge will work with both commercial and home embroidery machines. The thread tension gauge is hooked to the top thread from the presser foot and by pulling on the thread the embroiderer can determine the tension the embroidery machine is exerting on the thread. The embroiderer can then adjust top tension until the desired level of tension has been attained. This simple to use pen type tension gauge is suitable for both top thread and bobbin thread tension settings.
User guide settings:
- Ideal for commercial and home machines.
- Recommended tension settings for Glide Polyester thread are between 90-110 grams.
- Time Saver - no more wasting precious time trying to set tensions.
- Top Thread (Rayon 120/2 or tkt. 40) Tension Value 100-130.
- Top Thread (Polyester 60/3 or tkt. 40) Tension Value 110-150.
- Underthread (Polyester 120/2) Tension Value 20-35.
- Madeira Rayon thread usually should run between 110-125 grams.
- Madeira Polyester thread usually should run between 115-130 grams.
Tajima Thread Tension Gauge
This thread gauge allows an embroiderer to adjust top embroidery thread tension. The Tajima thread tension gauge will work with both commercial and home embroidery machines. The thread tension gauge is hooked to the top thread from the presser foot and by pulling on the thread the embroiderer can determine the tension the embroidery machine is exerting on the thread. The embroiderer can then adjust top tension until the desired level of tension has been attained. - Madeira Rayon thread usually should run between 110-125 grams. - Madeira Polyester thread usually should run between 115-130 grams.
This upper thread tension gauge is a great tool for finding and setting consistent thread tensions on your top threads!To Use This Item:
Pull 6" of thread through needle
Wrap the thread around the gauge hook
Pull the gauge towards you with the numbers facing up
As you pull, take note of the reading as this is the tension reading in grams. Polyester tension should be 120-150 grams and Rayon should be 100-120 grams.
Adjust you main tension knob until you get the correct reading.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Instructions on Using Tajima Thread Tension Gauge, from Happy Embroidery Machine Company in JapanHow to Use an Upper Thread Tension Gauge
Take the guess work out of setting thread tensions.
Using thread tension gauges makes it easy to adjust both bobbin and upper tensions. It's quick, easy and will help you eliminate unsightly bobbin thread showing on top, looping top stitches and thread breaks. Your embroidery will look its best with consistent, balanced thread tensions. Here's how to use a top embroidery thread tension gauge to take the tension out of setting tensions!
Instructions for Use:
- Pull approximately 6 inches of thread through the needle and presser foot.
- Wrap the thread around the gauge hook (sometimes it's necessary to wrap it
several times so it won't slip).
- Steadily pull the gauge towards you with the window of the barrel facing up.
- As you pull, take note of the reading. These represent tension readings in grams. Polyester threads require higher tensions than Rayon. Polyester tensions 120 to 150 grams. Rayon tensions 100 to 120 grams.
- Adjust your machine main tension knob until you get the desired reading.
Once you have adjusted your thread tensions, it's always a good idea to run tests.
- First run the fill stitch test pattern.
- If you experience any top stitch looping, slowly tighten the main upper tension knob until this looping goes away (looping can also occur if your bobbin tension is too tight).
- Proper tensions for satin stitches should reveal 1/3 bobbin and 2/3 top thread color on the underside of the embroidery.
Note: Too much bobbin showing on the underside and/or showing on the topside usually means either the bobbin tension is too loose or the top thread tension is too tight
Click Here to View a Troubleshooting Guide for Thread from Superior Thread Company(.PDF)
Tajima thread tension gauge enables embroiderers to measure and adjust top thread tension on both commercial and home machines. The tension gauge is hooked to the top thread from the presser foot and by pulling on the thread the embroiderer can determine the tension the embroidery machine is exerting on the thread. The embroiderer can then adjust top tension until the desired level of embroidery thread tension has been attained.
- Madeira Rayon thread usually should run between 110-125 grams.
- Madeira Polyester thread usually should run between 115-130 grams.
How to Use an Upper Thread Tension Gauge
Take the guesswork out of setting thread tensions. Using thread tension gauges makes it easy to adjust both bobbin and upper tensions. It's quick, easy and will help you eliminate unsightly bobbin thread showing on top, looping top stitches and thread breaks. Your embroidery will look its best with consistent, balanced thread tensions. Here's how to use a top embroidery thread tension gauge to take the tension out of setting tensions!
Instructions for Use:
Pull approximately 6 inches of thread through the needle and presser foot.
Wrap the thread around the gauge hook (sometimes it's necessary to wrap it several times so it won't slip).
Steadily pull the gauge towards you with the window of the barrel facing up.
As you pull, take note of the reading. These represent tension readings in grams. Polyester threads require higher tensions than Rayon. Polyester tensions 120 to 150 grams. Rayon tensions 100 to 120 grams.
Adjust your machine main tension knob until you get the desired reading.
Once you have adjusted your thread tensions, it's always a good idea to run tests.
First run the fill stitch test pattern.
If you experience any top stitch looping, slowly tighten the main upper tension knob until this looping goes away (looping can also occur if your bobbin tension is too tight).
Proper tensions for satin stitches should reveal 1/3 bobbin and 2/3 top thread color on the underside of the embroidery.
Note: Too much bobbin showing on the underside and/or showing on the topside usually means either the bobbin tension is too loose or the top thread tension is too tight
Common Singer Bobbin Cases & Bobbin Case Tension: Sunday Morning Quickies September 19, 2021 by Bob Fowler
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.