Also Includes

icon

INCLUDED: Organ 135x17 100 Needles Use Sz 20-25 Walking Foot Uph Machines/Threads

-7 Means Auto Backtack, Auto Thread Trimmers, Auto 9-16mm Foot Lift, Auto Needle Positioner, Control Panel, 9mm Stitch Length, Large M Bobbin, up to 3000SPM Servo Motor.
Has the standard CP18 Panel, not the wider CP180 as Panel shown in the picture on this page.
See videos below on CP18 panel* CP18 vs CP180 Comparison

The best basic upholstery machine on the market.

With its larger needle bar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness.
The machine's rectangular feeding motion promises the consistent feeding of materials of all thicknesses without stitch gathering.

All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H-7 . Will fit standard cut out. Also available with optional safety clutch

  • Automatic thread trimmer
  • Single Needle
  • Compound Needle Feed And Walking Foot
  • Speed up to 2500 Stitches Per Minute
  • 9 Mm Stitch Length
  • Industrial Upholstery Machine
  • US Warranty 30 Days labor on defects in materials and workmanship.
  • Non-US Warranty: 30 days parts and labor
Specifications
<
  • With its larger needlebar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness
  • Alternating vertical movements of the walking foot and presser foot are as large as 6.5 mm
  • In addition, the ratio between alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes
  • Rectangular feed prevents needle from fraying
  • Sews multi-layered parts of a material with consistent stitching pitch while preventing stitch gathering
  • When the thread is caught in the hook or any other sewing trouble occurs, the safety mechanism will automatically operate to prevent the machine from being damaged
  • Stitch length can be easily selected by the stitch dial
  • Includes a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel
  • Knee-lifter mechanism is built in the bed which reduces the pressure required to operate facilities setup
  • Machine's full open-type top design makes adjusting works easier
  • Machine comes with a lubricating mechanism that uses a centralized oil wick which substantially reduces the time and trouble required for oiling the machine
  • A walking foot mechanism is built into the machine arm to prevent oil from scattering
  • Stitch length: 9 mm
  • Needle bar stroke: 36 mm
  • Presser foot lift clearance by hand: 9 mm
  • Presser foot lift clearance by knee: 16 mm
  • Hook type: Horizontal-axis full-rotary double-capacity hook
  • Needle: 135 x 17
  • Thread: #30- #5, B46 - B138, Nm=60/3 - 15/3
  • Distance from needle to machine arm: 10.3"
  • Bed size is 477mm 178mm, or 18.75" x 7" standard flatbed.
  • Weight of machine head: 80.47 lbs
  • UL Listed







    *JUKI CP18 Control Panel - YouTube Videos

    Please review our Freight LTL Shipping Policies
    Ships Ground Freight only.

    Downloads (.PDF)
    Instruction Manual
    Specifications
    Parts list
    Product Brochure

    Machine Specifications
    Max. Sewing Speed 3,000 Stitch per Minute
    Max. Stitch Length 9mm (forward / backward)
    Needle Bar Stroke 36mm
    Lift of the Presser Foot by Hand 9mm
    Lift of the Presser Foot by Knee 16mm
    Thread Take-Up Slide Type
    Amount of Altering Vertical Movement 1
  • 6.5mm
    Hook Horizontal-Axis Full-Rotary Double-Capacity Hook
    Needle (at time of delivery) 135x17 (Nm160) Nm125
  • Nm180
    Thread #30
  • #5, B46
  • B138, Nm=60/3
  • 15/3
    Pitch Changing Method By Dial
    Lubrication Centralized Oil Wick Lubrication (hook:automatic)
    Lubricating Oil Juki New Defrix oil No.2 (equivalent to ISO VG32)
    Distance from Needle to Machine Arm 264mm
    Bed Size 477x178mm
    Compressed Air and Air Consumption 0.5MPa (5kgf/cm²), 0.3Nℓ/min
    Motor Output 750W
    Power Requirement Single-Phase 100
  • 120V, 200
  • 240V, 3-Phase 200
  • 240V
    Weight of the Machine Head 42.5kg

    Juki Warranty Information
I was referred to you about the Brother PQ15000S by Dwyana and told me to speak with you about tech stuff and options. I'm looking for a straight stitch machine to make horse halters, dog collars, and straps so I need a commercial grade type to be able to sew through about .01 inches - .45 inches of nylon webbing / nylon polyesters?
The Brother PQ1500 is an apparel fabric machine and you need an upholstery material machine with built in walking foot and maybe needle feed* to prevent slippage.
The best straight stitch Walking Foot Portables (39) is Sailrite Ultrafeed LS-1 Straight Stitch Walking Foot Metal Portable Sewing Machine and Foot Control
for up to 1/4" material.
The best straight stitch Walking Foot Needle Feed (88) with Power Stand is Juki DNU1541 Walking Foot Needle Feed*, Big M Bobbin, 9mm Stitch Length, 9/16mmLift, SetUp PowerStand for up to 1/2" material.
The best needles to sew through horse halters, dog collars, straps and .01 inches - .45 inches of nylon webbing / nylon polyesters is Organ Cool Sew size 20 up, which prevents heat build up in the eye and thread melting, shredding or breaking, which can be a problem with the dense materials you are sewing on.

I have a JUKI DNU 1541, It appears that it does not have a safety clutch as the shiny safety clutch button on the base is solid and unmovable. My question is, can a safety clutch be added to to a non safety clutch machine? Bruce
The DNU1541 cannot be converted to the DNU1541S. You would need to upgrade to one of our DNU1541S Safety Clutch machines. Juki