Bundle & Save

Get additional savings when you purchase any of these items along with this product.

*Extra Bonus Includes AllBrands BWG $40 Value 3 Year Nationwide Extended Warranty Enhancement, Repair Parts & Labor, Power Surg, Transfer Owner, No Lemon, Replace, Buyout% Depreciation, for Non Commercial Use in the USA.

See Compatibility Chart Below. Plugs into electronic computer sewing machine dedicated foot control port, eliminating the need to use your foot control. The Quilter's Cruise Control made in the USA, is a stitch length regulator for use with many short-arm quilting frames. It plugs directly into your sewing machine's foot pedal port. Using optical encoders mounted to your quilting frame, it actively changes the speed of the sewing machine as you move it over the fabric to help maintain uniform stitch length throughout the quilting project.

QCC will NOT work on Babylock BLQ2 not made by Brother, but WILL work on Babylock Quilters Choice Professional BLQP, and new Babylock Jane BL500A both made by Brother

Note: Plugs into foot control port of specified electronic sewing machines with frames, so you don't have to use a separate foot control. Requires quilting frame carriage platform to install x & y motion electronic encoders, which feedback the speed of platform movement, so the motor can speed up or down and maintain stitch length.

Using optical encoders mounted to your quilting frame, it actively changes the speed of the sewing machine as you move it to help maintain uniform stitch length throughout the quilting project.

• Made in the USA
• It is a stitch length regulator for use with many short-arm quilting frames.
• It plugs directly into your sewing machine’s foot pedal port.
• Optical encoders are installed on the carriages of a quilting frame to gather the speed information of the quilter's movement. This is transmitted to the brain of the Quilter's Cruise Control and then, in turn, to the
sewing machine. Without the optical encoders on the frame, there is no signal to the brain, etc. Therefore, there must be a frame with carriages for the QCC to work.

roper Optical Encoder Installation & Removal



  • US Warranty 1 year limited warranty on defects in materials and workmanship.
  • Extended US Warranty: Extended Warranty Available
  • Non-US Warranty: 30 days parts and labor
Specifications
*Current Compatibilities Available:

Sewing Machines

  • Babylock QCP Quilter’s Choice Professional (but not BLQP2 by Jaguar)
  • Bernina models 135-200
  • Brother PQ1300
  • Brother PQ1500
  • Brother PQ1500S
  • Brother PQ1500SL
  • Brother PQ1500SLPRW
  • Elna 7200
  • HandiQuilter Original HQ16 Machine and Frame
  • Husqvarna Viking Designer LE
  • Husqvarna Viking Designer SE
  • Husqvarna Viking Mega Quilter
  • Husqvarna SE LE
  • HV Designer Diamond
  • HV Designer 1
  • HV Designer 1 USB
  • HV Designer II
  • HV Designer SE
  • Janome 1600P Series
  • Janome 6300P
  • Janome 6500
  • Janome 6600
  • Juki TL98E
  • Juki TL98Q
  • Juki TL98QE
  • Juki TL2010Q
  • Juki TL2000Qi
  • Pfaff Grand Quilter
  • Pfaff Creative Vision
  • Pfaff Classic Style 2023, 2025, 2027, 2029
  • Viking Husqvarna Mega Quilter
  • Viking Husqvarna Sapphire 850

    Quilting Frames
  • B-Line with inserts
  • B-Line without inserts
  • Bernina Quilting Frame
  • Grace and Little Gracie (black plastic carriages)
  • Grace and Little Gracie (wood and aluminum carriages)
  • Grace GMQ Pro Frame
  • Grace Mini-Pinni
  • Grace Next Generation
  • Grace Pinnacle
  • Grace Sturdy Lite Quilting Frame
  • HandiQuilter
  • HandiQuilter II
  • HandiQuilter HQ16
  • HandiQuilter HQ16 Machine and Frame
  • Happy Jack
  • Hinterberg (Original)**
  • Hinterberg (Stretch)**
  • Hinterberg (Summit)**
  • Inspira Imperial
  • Inspira Original
  • John Watts Quilter
  • New Joy: Gold Standard
  • New Joy: Magic
  • PC Quilter's Max Throat
  • Pennywinkle Valley Ranch
  • Quilt Easy
  • Super Quilter King
  • Super Quilter Proflex
  • Suzy Q Quilter
  • Ultra Quilter

    **may require compatible parts, purchased from frame manufacturer.

    If you do not see your sewing machine or quilting frame, contact us for future release dates. We are working on adding different versions. Some Quilters Cruise Controls can take 2 - 3 weeks for delivery depending upon your machine and frame combination. Cruise Controls for common machine and frame combinations such as Juki TL series and Janome 1600 series machine being used on current model Grace frames usually ship in 1 to 2 days. All Quilter's Cruise Control products are shipped directly back to the manufacturer and have a 25% restocking fee.

    Quilter’s Cruise Control Troubleshooting Guide:

    General Set-up and Operation: the speed the sewing machine goes when you are using the QCC is determined by
    the speed that you are moving the sewing machine/carriages. The optical encoders pick up on the speed. The one
    on the upper carriage determines the speed you’re moving front to back and the one on the bottom carriage
    determines the speed you’re moving left to right.
    If you’re moving the platform more than 2 inches per second, you are moving too fast. The sewing machine will go
    only about 1500 stitches per minute (about two inches per second maximum). Faster than that, the sewing
    machine can’t go fast enough and then the needle coming out of the fabric can’t move fast enough to come out
    straight up. This can cause thread breakage.
    The Quilter’s Cruise Control has nothing to do with thread breakage. It serves basically the same purpose as the
    foot pedal. And the foot pedal has nothing to do with thread breakage.
    If your sewing machine has a speed slide, it should be in the middle range as this is the speed that works optimally
    with the usual settings on the Quilter's Cruise Control. The stitch length on the sewing machine should be set to
    zero. The pressure on the foot should be very low or zero.
    Troubleshooting for the QCC
    First, unthread your needle.
    Turn on the sewing machine and the QCC. Ensure the machine light is on and the needle is slowly moving up and
    down. Move the carriages front to back only. This checks the operation of the optical encoder on the top carriage.
    Do the same moving the carriages left to right. This checks the operation of the optical encoder on the bottom
    carriage.
    If the problem seems to be the front to back stitching, follow this sequence:
    First we need to narrow down if it is something wrong with the optical encoder or the wiring harness or if it is an
    installation problem. With the encoder wheel on the top carriage between your thumb and forefinger, spin the
    encoder.
    1) Does the machine change speed? Yes/No
    If yes, that encoder and the wiring harness to it are working just fine and there is something wrong with the
    installation. If the sewing machine does not speed up and slow down, something is not right with the encoder or
    the wiring harness to it or the installation (see below for a couple of suggestions).
    If the problem seems to be the left to right stitching, check the optical encoder on the lower carriage instead.
    If this is an installation problem, follow this sequence: Make sure that the optical encoder "tires" or o-rings on the
    upper carriage are making good contact on the lower carriage. Gravity should hold the encoder down, although it
    should not be so tight that you can't raise it up and let gravity take it down again.
    2) Are the O-rings making good contact? Yes/No
    Make sure that the encoder is spinning smoothly. If it's hard to see, you might want to put a dot of white paint or
    fingernail polish on one of the edges to help see.
    3) Is the encoder spinning smoothly? Yes/No

    If it is not an installation problem, follow this sequence: Now we need to figure out if it is the optical encoder or
    the wiring harness. The way to tell is by gently, very gently, unplugging the wire from the optical encoder and
    swapping it over to the other optical encoder. If the problem moved, then the wiring harness is the culprit. If it
    stayed in the same place, then the optical encoder is the culprit.
    4) What is the culprit? Wiring harness/Optical encoder
    Best Practices...You may also want to check:
    Bobbin tension. Be sure to check the tension in the bobbin. You can do this by taking the bobbin case with the
    bobbin in it and the thread coming out of it. Pretend that it is like a yoyo. Take the protruding thread into your
    right hand. Hold your left hand (if you’re right-handed, otherwise just the opposite) below your right hand.
    With your right hand holding the thread, allow the bobbin case to move down the thread into your left hand.
    If it moves so quickly you don’t need to coax it like a yoyo, the tension is too loose. Tighten it up (tighten the
    screw on the bobbin case until such time you test it, it needs to be coaxed down the thread into your left
    hand). If the bobbin case doesn’t move down at all, loosen it (loosen the screw on the bobbin case until such
    time you test it, it needs only a bit of coaxing, but does move down into your left hand).
    Thread path. Refer to your sewing machine manual and follow the directions for threading the machine. For
    example, from the pin holding your thread spool, guide the thread up through the two loops on the
    telescoping pole, then down through the third hole on the pre-tension arm. Do not go around the screw-like
    part that is used only for winding a bobbin. Then guide the thread through the tension disks over the tension
    spring, under the lower hook, up through the reciprocating arm, then down and through the thread guides
    and through the hole in the needle. This ensures that the thread tension, together with the correct bobbin
    tension, is appropriate and won’t cause any thread breakage.
    If the thread is correctly routed, there should be no problem. If there is still a problem, there could be a burr
    in the tension spring. Or there could some other mechanical anomaly in the sewing machine.
    New needle. Needles should not be used more than 8 hours.
    Make sure that your feed dogs are down all the way. If they’re rubbing up against the bottom of the fabric,
    then you could have a problem with the fabric “sticking” and them maybe not “moving” away from the
    needle quickly enough to avoid broken thread or even a broken needle.
    Make sure that you have appropriately raised the frame’s take-up bar that goes through the throat of the
    sewing machine. If the fabric isn’t just on or barely above the throat of the machine all the way across the
    frame, you could have one of two problems: If too low, it will bog down your movement of the carriages. If
    too high, the fabric is tenting up, meaning that it is too high above the throat and when the foot goes down
    and then comes back up again, the fabric comes up before the needle has had a chance to come out of the
    fabric. This could also cause broken thread and broken needle.
    If you are unable to make any determination of the culprit causing the troubles, you may wish to send the unit
    in for diagnosis/evaluation/service/repair/replacement. There is a minimum service fee required for all Service
    Tickets, please contact us for information.
Included Accessories
  • Quilter's Cruise Control brain (5.3"L X 2.6"W X 2" Tall)
  • Optical encoders
  • Wiring harness
  • Mounting hardware (specific to quilting frame)
Re: Grace Sure Stitch Regulator and the Quilters Cruise Control. Can you explain the difference? These two products provide the same function. QCC is compatible with more machines than Grace. See lists on our product web pages. I'll ask input from John.... Denise, if you have a Grace made frame, you should use Sure Stitch Regulator because if there is ever a problem with either one just contact [email protected] If you have a non-Grace frame, you should use Quilters Cruise Control and contact [email protected] if you ever have a problem.

QCC: Plugs into foot control port of specified electronic sewing machines with frames, so you don't have to use a separate foot control. Requires quilting frame carriage platform to install x & y motion electronic encoders, which feedback the speed of platform movement, so the motor can speed up or down and maintain stitch length. Using optical encoders mounted to your quilting frame, it actively changes the speed of the sewing machine as you move it to help maintain uniform stitch length throughout the quilting project.

GRACE: Includes X & Y Encoders, Start Stop, Speed Range, LCD Display, for Designated Electronic Sewing Machines*on Designated Grace Quilt Frames, For Quilting Machines w/o Stitch Reg. The Grace SureStitch is both a stitch regulator and constant stitch speed control. In Stitch Regulation mode, it takes advantage of your machine's full range of speeds. As you speed up and slow down, so will your machine, keeping all of your stitches the same length. When used as a speed control, the SureStitch lets you adjust the speed of your sewing machine with the push of a simple button.

Voyager 17: There are two ways to get stitch length regulation (QCC) on the Voyager 17 machine and frame. The first way is to purchase a regular QCC, as you currently have on your website. The price is the normal QCC price you are charging. This sometimes requires the customer to open up the control box of the Voyager 17 sewing machine and make adjustments in order for the idle speed for the sewing machine to work correctly. This is due to the fact that not all the sewing machines seem to be set the same way when they leave the factory. We have a separate controller for the Voyager 17 machine that works a bit differently. This involves the customer sending in their Voyager 17 machine head. We install a different control box onto the sewing machine, add the needle up down positioning function, and make all the internal sewing machine motor and electronic adjustments prior to returning the sewing machine and stitch length regulator to the customer. The customer must sign waivers indicating that they give us permission to work on the sewing machine and make changes and adjustments necessary for the stitch length regulator to work, etc. This work takes us the better part of a day to complete, and we charge USD699 plus return shipping. It involves quite a bit of interaction on our part with the customer during the process. QQC Quilters Cruise Control

How do I set up the Quilter's Cruise Control with my machine and frame?
All the installation instructions for the various frames we support are on the FAQ page on our website: www.quilterscruisecontrol.com. We also include a copy of the pertinent installation sheet in each of the boxes we ship out.Carol

The product that was purchased is very good, and it should be clearly stated that the item is not returnable, except for item exchange. Richard
Our warranty is 1 year parts and labor on defects in material and workmanship. That said, however, there are two more points to make. We have made ‘warranty’ repair on items older than 1 year, sometimes even when there is no defect and only mishandling or misuse of the product by the consumer. We charge return shipping on repairs that are sent in, either by Visa or Master Card, or if the customer desires, personal check in advance. If there is some aspect that is not repairable, we make a replacement. It may take up to 2 weeks for a repair to be complete and back on its way to the customer, based on time or receipt and production schedule in the back. Regarding return, there is a 15% restocking policy. The way it works is one of your customer service representatives takes down all the details. First we try to fix the problem, which works in 90% of the cases. Most problems are a matter or incorrect installation. On the remaining cases, when there is something else going on, not a defect or other problem that can be corrected by us or you, the customer gets approval in advance from you to return the product to us. When that happens, we check everything out to make sure all components have been returned and issue you a credit, which is then applied against your next monthly invoice. I hope this helps. Let me know if you have any other questions. Carol

How do you turn it off?
The Quilter’s Cruise Control, when engaged with the switch on the remote hand switch, starts the sewing machine needle up and down in what we call “idle speed.” That’s normal. The only way to stop the idle speed is to switch off the QCC with the remote hand switch.

How much does it cost?
The Quilter's Cruise Control® MSRP is USD559. Many of our authorized dealers have specials and quilting packages, so their prices may differ. The Quilter's Cruise Control® includes:
• The Quilter's Cruise Control® Brain and remote - specific to sewing machine


• Optical Encoders, wiring harness, and mounting hardware - specific to quilting frame

Where can I buy the Quilter’s Cruise Control®?
Contact one of our Authorized Dealers. Check your local listing for sewing machine and/or quilting frame dealers. Give them a call and ask if they carry the Quilter’s Cruise Control® . (We have a listing of dealers on this website, but our list is growing on a weekly basis, so it's not comprehensive and is regularly under construction.) For a Pfaff or Husqvarna Viking sewing machine compatibilities, contact an authorized Pfaff or authorized Husqvarna Viking dealer.

Where can I get additional information?
Contact your dealer. They should be able to assist you with questions specific to your set-up (machine/frame combination). Additionally, they may be well-versed with many different types of set-ups and therefore quite knowledgeable.

What type of guarantee is provided with purchase?
Please contact your dealer.

What type of warranty is provided with purchase?
12 months parts/12 months labor (PDF available below)

Will the Quilter's Cruise Control® work on both of my frames?
Some people have more than one short-arm quilting frame and would like the Quilter's Cruise Control® to work on both interchangeably. This is not totally out of the question. Although the mounting hardware is different for the different frames, it is available for purchase as a separate accessory. In some cases, you may be able to use the same two optical encoders and simply purchase separate hardware. In other cases, you may need to purchase a second set of optical encoders for the second frame, and utilize the same "Brain" for the two frames. Please contact us with the information on both frames, as we'll let you know what your options are. NOTE: if your frames are not listed as being compatible with the Quilter's Cruise Control®, we may not be able to accommodate your request. Additionally, this is only applicable for use with the same sewing machine: the Juki-compatible "Brain" will work only on the Juki TL98E; the Brother-compatible "Brain' will only work on the Brother 1300, Brother 1500 and Babylock QCP. You cannot use the Juki "Brain" on the "Brother" for example.

How do I know which B-Line frame I have?
There are 2 different types of B-Line frame available: QCC-ready and regular. The QCC-ready version has metal, threaded inserts on the top and bottom carriages (see left). This is where the optical encoders are mounted, using the bolts provided. Regular frames do not have this insert, thus requiring different mounting hardware. Shown: B-Line carriage with insert.

Will the Quilter's Cruise Control® help with needle and thread breakage?
Yes, using the Quilter’s Cruise Control® will virtually eliminate needle and thread breakage!

Most thread and needle breakage is caused by improper stitch length control. When the Quilter’s Cruise Control® is used, the sewing machine motor slows down when the machine slows down. When the machine stops, the sewing machine motor runs at its slowest speed. *Note* Your machine should be in good operating condition prior to using the Quilter's Cruise Control®. The Quilter's Cruise Control will not fix pre-existing problems such as a dull needle, improper tension, or a machine that has timing problems, etc.

What accessories are available? (see Accessories page for more information)
• Stylus Assembly is priced at USD35 (while supplies last)
• Driveway is priced at USD14
• Parking Space for Grace/Little Gracie is priced at USD19
• Additional Optical Encoders for second frame are priced at USD65 each
• Additional wiring harness for Optical Encoders is priced at USD29
• Additional mounting hardware for Optical Encoders is priced from
USD10-20
• Remote hand switch is priced at USD25
• Replacement Freeway, for Hinterberg frame USD10
• Replacement Double-ended connector cord USD10
• Replacement Power Supply/Transformer USD20
• Quilter's Cruise Control® Brain (only) USD400

It seems no matter what I do and no matter how fast I sew my stitch regulator speeds up and slows way down not matter how fast I am sewing. What am I doing wrong?
The problem you are seeing is caused by vibrations in the frame. The optical encoders ‘see’ the vibrations and think you are moving things really fast.

The solution: Get a very good quality mousepad, cut it in half. Place it on top of the frame carriage and then place your sewing machine on top of that. The sewing machine’s vibrations won’t go into the frame, rather be absorbed into the mousepad, and the optical encoders won’t ‘see’ any vibrations.

We find this problem occurs with the New Joy Gold Standard frame and the Inspira frame.

Can the customer use quilters cruise control with the speed limiter on this machine? She needs to be able to control the speed on the machine because right now it's going too fast for her. She already has the quilters cruise control on the machine. Marquita
If her Juki TL98E is going to fast with the QCC she already has, she only has to slow down the movement of fabric to get the motor will slow down. Sounds like she's moving the fabric too fast. John at AllBrands
Another reason it may be sewing too fast is if there's some kind of a vibration in the frame or the carriages that the optical encoders are picking up. This sometimes occurs when the frame is light-weight aluminum and gets a vibration from the sewing machine while you're quilting.
If this is the problem, it can be addressed by putting a good quality computer mouse pad on top of the top carriage and underneath the sewing machine. You will have to cut the mousepad in half and arrange it on the carriage. If this doesn't address the problem, then I can send some troubleshooting information to narrow down the problem. Carol at QCC

I am having problems with my stitch regulator on my husquavarna Viking mega 18 x 8.
I am sending pictures from this am. Notice the butterfly on bottom left, that is what happened when I lengthened my stitch just a bit from the 0 point. The other stitching is at 0, the smallest length. My husband had just switched the wires on the encoders, where the plug into the brain. Yesterday nothing would happen on auto but worked on manual.
I have an imperial frame with Quiltsewclever.
What Do you think I should do to fix this problem ?
Pam K
Hi Pam, Sorry to hear you're experiencing troubles with your Viking 18x8, we hope we can help.
Attached please find a QCC Troubleshooting Guide. You do not have a QCC (Quilter's Cruise Control; stitch regulator for certain mid-arm sewing machines), however, going through the outlined steps might help you to troubleshoot your long-arm stitch regulation system. Going through the outlined steps should result in determination of which specific component is the culprit. Feel free to "reply all" with the results of your efforts. If we can help you further, we'll be happy to! NOTE: Sometimes, the "fix" is as simple as changing the rubber o-rings on the optical encoders. These are components which can be easily forgotten, but should be seen as "consumable" as they will deteriorate over time...if you've never changed them, whether they're the culprit this time or not, it's probably time to replace them with new. MyQbot.com
Sharon S, Arden NC
This was my first order. Product arrived faster than expected! Thank you.

Martha T, Cleveland GA
Enjoyed working with this company, they called me to check and make sure I had ordered the correct one for my machine and I’m enjoying the use of the cruise controller

Rosemary, Florida
customer service great!!

Corliss, North Carolina
The instructions for installing the Cruise Control left a bit to be desired but I evenutally got it right.

Sharon, New Hampshire
This was my first experience with your company and I was very pleased. The customer service rep that helped me with my order was wonderful. I will recommend your company to the ladies that I sew with. Thank you for providing prompt and courteous service.

Jennifer, Australia
it was a pleasure doing business with your company. I will be shopping again in the near future.

Diane, Arizona
I receiced the cruise control 3 days after ordering. I saved $106.00 by purchasing it from you rather than a local shop. My husband installed it without problems. This cruise control has made such a difference. I used to get so frustrated trying to complete one pass on a quilt as the thread was constantly breaking or the bobbin thread bunching up. Now with this, the machine glides over the quilt. Thank you so much.

Victoria, Australia
Well done,,speedy accurate and easy site to use. I am already playing with my product. Thank you

Quilters Cruise Control,
When the sewing machine is turned on and the Quilter’s Cruise Control is plugged in to the sewing machine and you flip the switch on the remote hand switch, the sewing machine needle should start going up and down slowly. So that much is working correctly. This means that the Quilter’s Cruise Control and the sewing machine are communicating. Now, for the problem of no change in the speed of the needle going up and down, that means that the optical encoders are not communicating with the Quilter’s Cruise Control. This can be caused by several things. Please read and follow the suggestions below so that we can narrow down where the problem is. Regarding the speed slide on the front of the sewing machine if there is one: It should be in the middle range as this is the speed that works optimally with the usual settings on the Quilter’s Cruise Control. Also, the stitch length on the sewing machine should be set to zero. The Quilter’s Cruise Control is supposed to regulate the stitches so that they are all the same length. The only time this doesn’t work is if you are moving too fast (more than 2 inches a second), or if the optical encoders aren’t working properly (either because of installation problems or if there is something wrong with an optical encoder, a wire, or the QCC brain). Try this: First, unthread your needle. Turn on the sewing machine and the QCC. Ensure the machine light is on and the needle is slowly moving up and down. Move the carriages back to front only. This checks the operation of the optical encoder on the top carriage. Do the same moving the carriages left to right. This checks the operation of the optical encoder on the bottom carriage. If the problem seems to be the front to back stitching, follow this sequence: First we need to narrow down if it is something wrong with the optical encoder or the wiring harness or if it is an installation problem. With the encoder wheel on the top carriage between your thumb and forefinger, spin the encoder. Does the machine change speed? If so, that encoder and the wiring harness to it are working just fine and there is something wrong with the installation. If the sewing machine does not speed up and slow down, something is not right with the encoder or the wiring harness to it or the installation (see below for a couple of suggestions). If the problem seems to be the left to right stitching, check the optical encoder on the lower carriage instead. If this is an installation problem, follow this sequence: Make sure that the optical encoder “tires” or o-rings on the upper carriage are making good contact on the lower carriage. Depending on which frame you have, most if not all of the tires should be in contact with the lower carriage. Gravity should hold the encoder down, although it should not be so tight that you can’t raise it up and let gravity take it down again. Make sure that the encoder is spinning smoothly. If it’s hard to see, you might want to put a dot of white paint or fingernail polish on one of the edges to help see. If it is not an installation problem, follow this sequence: Now we need to figure out if it is the optical encoder or the wiring harness. The way to tell is by gently, very gently unplugging the wire from the optical encoder and swapping it over to the other optical encoder. If the problem moved, then the wiring harness is the culprit. If it stayed in the same place, then the optical encoder is the culprit. Lastly, I think that the reason your Quilter’s Cruise Control isn’t telling the sewing machine to speed up and slow down is because the wiring harness connectors aren’t properly plugged in to the optical encoders. When you insert the wiring harness into the optical encoder, the orange wire should be opposite the number ‘1’ on the encoder cap. If it is opposite the ‘4’ and you have tried to push it in, you may have damaged the pins inside the optical encoder port or craqcked or broken the white connector. Is it possible for you to take a digital picture of the way you are trying to install it and send it back to us? Also, take a picture of the inside of the port where the pins are located. They may be bent and causing a problem inserting the connector now.

Carol, Quilters Cruise Control
Hi, John, We have a request in with a local dealer to borrow one of the Berninas to determine if the later models than 134-200 will work with the QCC. I’ll let you know when I get the machine in and tested. Carol, Quilters Cruise Control

Susanne, Denmark
We here in Denmark could learn a lot. Great and kind service. I called Allbrands for questions. Great product! This is the first time I ordered, but not the last. From a very happy Danisch quilter

Mary, Maryland
I received the stitch regulator day after I order it, installed it myself and love it. I have been practicing designs and a scrap quilt but expect to work on my queen size quilt this week. So far it is a great product, and very happy with it. Thank you for great service so far. I also like the 5 year extended warranty.

Kelley, Oklahoma
I have looked at the Quilters Cruise control for about a year now. A wonderful piece of equipment and what a difference it has made in my machine quilting. So easy to use! Product delivered in a timly manner and tracking was easy to follow. Thanks so much!!!

Ronna, California
I am having some difficulty getting it to run correctly, but I have received a response to my query by e-mail and will try the suggestions I was given. I was pleased so far with the support response!

Curtis, Chickasha, OK
My husband figured it out and is presently using it. *If you would relay this message to the manufacturer I would appreciate it.* It's hard to stay angry with someone that goes the extra mile to help. My mistake has turned out to salvageable. Thank you again.

James, Ogdensburg, NY
This was an E-Bay "buy it now" purchase but the price was superior... And when I had a question someone promptly responded to my e-mail inquiry.

Kenneth K., Laingsburg, MI
Item ordered is for Christmas, will know about quality, performance, etc. soon. VERY FAST shipping on this and the other item ordered!

Lise R, Buford GA
I received what I ordered a lot quicker than I expected. All was great.