
Taking care of your garment, clothes, kitchen, bath and bedroom fabrics at home is easier, faster and less expensive than taking them to the cleaners! Steam presses are chemical free and can reduce your household and workroom carbon footprint on the environment. Select replacement and upgrade steam and dry ironing presses from the very best brands and manufacturers below. You will find a large selection of Steam Press Brands also know as Dry Ironing Board Presses and Steam Presses.
Note: Home Ironing Board Presses have 100 pounds pressure between upper iron plate and lower ironing board. Pressure is less at ends of the boards, depending on press width, fabrics and garments.
Clamping mechanisms are in the middle of the press and lose some pressure at the ends You can equalize the pressure using press cloths at one or both ends. We have few complaints in 38 years. It is not a problem on shorter boards like Elna. Miele and Singer rotary presses are best for equal pressure. John.Douthat@AllBrands.com, Owner and Tech.
"All steam presses on the market do not have even pressure distribution throughout the pressing board. Pressure in the middle of the board is always stronger then it is on the edges of the press. The pressing dimensions of our steam presses (S330 & S550) are as stated on our product info sheets / website." Reliable
Included in this Category:

8687: Family Inspire 26 Electronic Steam Ironing Press Board 26x10" 1600W AutoOff (Replaces FP202E) |
Our Price: $317.41 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
Note: An unexpected spike in electricity might cause this unit to go into the "reset" mode which will temporarily prevent it from heating up. This is a built-in safety feature.
The Inspire 26 replaces the older FP202E model. The main differences are that the boards have been updated, the handle with steamburst has been improved, but the size and specifications are the same.
We are now shipping the new 1600W Family Press, which replaces the prior 1600W model
The
Yamata Family Press is the first and most advanced electronic steam press. The FP-202E comes with the most accurate settings and safety features while incorporating features available with regular steam presses.
More
Yamata FP202e Features:
- For all types of clothing: pleated skirts, pants, blouses, shirts, ties, cloth belts, and scarves
- 26" by 10" pressing board dimensions
- 100 Pounds Pressing Pressure
- Auto shut-off if down over 10 seconds
- Auto shut-off if left up for over 15 minutes
- Includes sleeve pad and spray bottle
- Portable an easily stored
- LED lights for power, correct temperature, and steam
- Instruction Manual
Please note: For home use only.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Instruction Manual for similar FP202E Press
Assembly, Parts, Warranty, Operation Instructions for Family Press Digital Fabric Steam Presses
-
Application Power: 110-120V, 60Hz
-
Power: 1600 Watts
-
Pressing Plate Size: 25x10" (630x260mm)
-
Measurement: 68.5x25x58cm
-
Gross weight: 27 lbs.

Hamilton Beach Full-Size Folding Ironing Board |
Our Price: $66.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Laundry doesn't have to be such a chore with the Hamilton Beach Full-Size Ironing Board. Four legs give the base stability, so there's no wobbling while ironing. Adjustable height, fold-up storage and a machine-washable cover makes this necessary tool easier to work with and put away when not in use.
Full-Sized 14" x 54" Surface
Get the full-size flexibility to spread out clothes and iron with less maneuvering.
Stable Base
4 legs provide a solid and stable base, so there's no wobbling or wavering while you iron.
Adjustable Height
With the push of a lever, you can adjust the ironing board's height up to 3.1 feet. 10 different heights make it flexible enough to fit you.
Folds Up For Storage
Tuck away the ironing board in a closet, corner or even hang it on a wall mount.
Contoured, Machine-Washable Cover
Designed to fit the ironing board snugly, the stylish cover is also easy to keep clean
Non-US Warranty: 30 days parts and labor.
Specifications
- 4 stable legs - Won’t wobble as you iron
- Adjustable height - 10 different heights, up to 3.1 feet
- Iron rack - Holds iron within easy reach
- Machine washable contoured cover
- Folds for storage - Fits behind doors or in closets
- 14 in. x 54 in. full-size ironing surface - Fits pants, skirts and linens
Dimensions (inches): 37.64 H x 55.8 W x 14.6 D

Singer 220429112.04 Steamcraft Steam Iron |
Our Price: $59.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
SINGER SteamCraft irons have the specific features that finally solves Sewers hunt for the perfect iron. With the OnPoint™ tip technology (patent pending) to easily iron around buttons, seams, and pleats for a crisp finish. The always-on 30-minute vertical auto-off feature keeps your iron ready during long projects. Vertical steam allows for effortless steam for larger bolts of fabric.
SteamCraft irons have internal anti-calcium filters so they are tap water safe. We do recommend using the self clean function on a regular basis if the iron is used frequently to ensure any sediments or minerals are flushed out of the system. This is included in the instruction manual.
Other Features:
- Easy-fill, no-drip water tank with large filler opening
- Stainless steel sole plate
- Weight: 3.3 lbs. (1,484 g)
- Ergonomically designed with easy-to-reach controls
- Extra large & transparent water tank
- Protects delicate fabrics like quilts with steam on/off controls
- Vertical Steam
- Dimensions: 11.4 x 4.8 x 6.0 inches (289 x 122 x 152mm)
- Burst of Steam - 1.2g per shot 72g/min
Non-US Warranty: 30 days parts and labor.
Specifications
SINGER SteamCraft sewing irons - designed specifically to meet sewers’ exact needs.
- OnPoint Tip for a More Detailed Finish on Buttons, Cuffs, and Pleats
- Precision Controls
- Large Water Tank Capacity
- 10’ Cord Length with Handy Cord Wrap for Easy Storage
- 30 minute Auto Off Delay

Homz Anywhere Countertop Ironing Board |
Our Price: $34.99 Prices are subject to change, and only current prices will be honored.
Availability: OUT OF STOCK
Condition: New In Box
|
Features
- Distinctive leg shape permits garments to slide onto board without interference, allowing for maximum ironing surface
- 15% larger top than other countertop boards
- 8" height makes ironing on any surface more comfortable
- Convenient hook hangs on closet rod or wall hook
-
Color: Solid Blue
-
Material: Cotton
-
Material: Foam
-
Form Factor: Countertop
-
Width: 36"
-
Depth: 13"
Non-US Warranty: 30 days parts and labor.
Specifications
The Homz Anywhere Countertop Ironing Board offers the best of both worlds! It is completely portable and easy to transport for use anywhere, yet the top ironing surface is 15% larger than most countertop boards. Use it on the counter, floor, sofa, or any other living area of your home. You no longer need to be locked to one area to do your ironing - bring it out and move it anywhere to work! The feet fold flat for compact storage when not in use. There is a convenient hanger at the top of the board for hanging on a closet dowel bar.

Jacksons Woodworks JW1002 Medium Tailors Clapper 9-1/2" |
Our Price: $25.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Medium Tailors Clapper The Tailors Clapper is a must for sewing and ironing. It is used to press seams without burning. Used with steam from your iron, press the area with the clapper and hold for just a few seconds, it will leave a nice crisp seam. We offer this handmade clapper in Oak. It weights about 12oz and measures 9 ½ inches long, 2 1/2 inches wide tapered down to 2 inches and is 1 1/2 in thick. Both sides have routed grooves to offer easy handling and is unfinished to absorb the steam better. Colors may vary from the above picture, they may be lighter or darker depending on the variations of color in the wood used.
Non-US Warranty: 30 days parts and labor.

103671: Jacksons Woodworks JW1001 Large Tailors Clapper 11 ½” |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Large Tailors Clapper The Tailors Clapper is a must for sewing and ironing. It is used to press seams without burning. Used with steam from your iron, press the area with the clapper and hold for just a few seconds, it will leave a nice crisp seam. We offer this handmade clapper in Oak. It weights about 1.2 lbs and measures 11 ½” inches long, 3” wide tapered down to 2 1/2 inches and is 1 1/2” thick. Both sides have routed grooves to offer easy handling and is unfinished to absorb the steam better. Colors may vary from the above picture, they may be lighter or darker depending on the variations of color in the wood used.
Non-US Warranty: 30 days parts and labor.

Jacksons Woodworks JW1003 Small Tailors Clapper 7-3/4" |
Our Price: $23.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Small Tailors Clapper The Tailors Clapper is a must for sewing and ironing. It is used to press seams without burning. Used with steam from your iron, press the area with the clapper and hold for just a few seconds, it will leave a nice crisp seam. Beech wood. Both sides have routed grooves to offer easy handling and is unfinished. Width Measurements are 1 3/4 in tapered down to 1 1/4 in , Length is 7 3/4 in. Colors may vary from the above picture, they may be lighter or darker depending on the variations of color in the wood used.
Non-US Warranty: 30 days parts and labor.

Jacksons Woodworks JWTC3 Clappers 1 Bundle: 1 Large JW1001, 1 Medium (JW1002), 1 Small (JW1003), and 1 Point Press (JW1004) |
Our Price: $119.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Clappers 1 Bundle includes one of each of the following: 1 Large Tailors Clapper (JW1001) 1 Medium Tailors Clapper (JW1002) 1 Small Tailors Clapper (JW1003) 1 Point Press and Pounding Block (JW1004).
Large Tailors Clapper. The Tailors Clapper is a must for sewing and ironing. It is used to press seams without burning. Used with steam from your iron, press the area with the clapper and hold for just a few seconds, it will leave a nice crisp seam. We offer this handmade clapper in beech wood. measures 11 1/2 in long, 3 in wide tapered down to 2 1/2 in and is 1 1/2 in thick. Both sides have routed grooves to offer easy handling and is unfinished to absorb the steam better.
Medium Tailors Clapper The Tailors Clapper is a must for sewing and ironing. It is used to press seams without burning. Used with steam from your iron, press the area with the clapper and hold for just a few seconds, it will leave a nice crisp seam. We offer this handmade clapper in beech wood. Measures 9 1/2 in long, 2 1/2 inwide tapered down to 2 in and is 1 1/2 in thick. Both sides have routed grooves to offer easy handling and is unfinished to absorb the steam better.
Small Tailors Clapper The Tailors Clapper is a must for sewing and ironing. It is used to press seams without burning. Used with steam from your iron, press the area with the clapper and hold for just a few seconds, it will leave a nice crisp seam. Beech wood. Both sides have routed grooves to offer easy handling and is unfinished. Width Measurements are 1 3/4 in tapered down to 1 1/4 in , Length is 7 3/4 in.
Point Press and Pounding Block is a valuable 2 in 1 tool for every sewer. The point presser Side works like an ironing board for pressing hard to reach seams and enclosed corners. The pounding block/ clapper side is used to set permanent creases and flatten bulky seams without scorching. This item is made of solid beech wood. Measures 15 7/8 in x 5 ½ in x 2 ¾ in
Colors may vary from the above picture, they may be lighter or darker depending on the variations of color in the wood used.
Non-US Warranty: 30 days parts and labor.

97026: Singer ESP260T Intelligent 26in Clamshell Ironing Board Press 1800W, 70g/Min Steam, 800ml Tank, Auto Shutoff, 1.6Min Heat-up Time, 5 Fabric Settings |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored.
Availability: OUT OF STOCK
Condition: New In Box
|
Features
The SINGER® Steam Press is an easy at home fabric care product designed to save you time, money and provides dry cleaning results at home.
The SINGER® Steam Press is an easy at home fabric care product designed to save you time, money and provides dry cleaning results at home. With a 26" pressing surface and 800 ml, it will help you power through any craft and garment care.
Since 1851, SINGER® has been the trusted leader in fabric and garment care. We have applied over 160 years of experience working with fabrics to develop our new durable, consumer-inspired garment care products. Singer is the educational source to teach our consumers how to best care for their garments so that they can feel confident and look their best.
Non-US Warranty: 30 days parts and labor.
Specifications
Instruction Manual Singer ESP260T Intelligent 26" Steam Press
- 26" Press Surface
- Dry Cleaning Results at Home Saves Money on Your Dry Cleaning Bill
- Professional Steam Output - Continuous Steam and On-Demand Burst of Steam
- Non-Stick Pressing Surface Heats up to Nylon Setting in 108 Seconds
- 800 ml. Tank Capacity
- 1.6 minute heat-up time (Nylon setting)
- 5 fabric settings
- 1800 watts
- 70 g/min steam rate
- Auto Shutoff, Alerts if left on
- Compatible Stand: ST-07H
Singer Steam Press Videos

97116: Singer SP55001 20" Ironing Board Garment Press Steam Iron, 1500W, 150ml Water Tank, 30g/min Steam Output, Safety Auto Shut Off, Sleeve Pressing Pad |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored.
Availability: OUT OF STOCK
Condition: New In Box
|
Features
Since 1851, the name Singer has been synonymous with sewing and garment maintenance. The Singer 20"" Professional Steam Garment Press is the perfect press for maximum garment care. Basic features include a 20"" press surface length, 150ml tank capacity, and quick heat-up time with a steam output of 30 g/minute. And Singer offers a variety of helpful video tutorials, found by visiting the Singer website.Die-cast aluminum frame, 1500 watts, Auto shut-off, Includes pressing pad, refill container & spray bottle.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Product Overview
UPC Code: 037431886675
Manufacturer Warranty: 1 YEAR
D&H Returns Allowed: yes
Return Period (Days): 90
Add'l Return Info: Past Exch-Call Vendor 800-474-6437
Master Pack Qty: 1
Country of Origin: CHINA
General Information
Manufacturer: SVP Worldwide
Manufacturer Part Number: SP550.01
Manufacturer Website Address: www.svpworldwide.com
Brand Name: Singer
Product Name: Press Iron
Product Type: Press Iron
Technical Information
Automatic Shut Off: Yes
Reservoir Capacity: 5.07 fl oz
Reservoir Type: Removable
Steam Output: 4 lb/h
Power Description
Power Consumption: 1500 W
Physical Characteristics
Material: Frame
Miscellaneous
Country of Origin: China
Warranty
Limited Warranty: 1 Year

29090: Family Inspire 36 Largest Home Use Digital Steam Ironing Board Press 36x10" |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
The Inspire 36 replaces the older FP202XL model. The main differences are that the boards have been updated, the handle with steamburst has been improved, but the size and specifications are the same. Take the hassle out of ironing with the INSPIRE 36 large surface electronic deluxe steam press. This large steam press features an LED temperature display for accuracy and improved electronics, and it offers steam and dry settings. The 36-inch height allows the user to press large areas of fabric at once, making pressing the wrinkles from inseams and dresses simple and easy. Specially designed contour handle offers easy and strong grip. Vertical storage allows for this large steam press to fit into the tightest of spaces.
- 212°-392°F Temperature range
- Largest steam press plate at 36" x 11"
- Steam and dry capabilities
- 1600 Watts of power with steam burst
- 100 lbs of pressure
- LED Temperature display
- Stores vertically for easy storage
- Audible safety alarm
- Non-stick teflon heating plate
- Timed safety auto shutoff
- Press the entire inseam of your pants.
- Application Power: 110-120V,60Hz
- Power : 1600 Watts (Only one in the market)
-
The Heat Plate is the Top of The Iron. The actual size is 36 x 11. The ironing board below is 1 inch smaller so the 36x11" heat plat shoe above can pres to the edges.
Note: Home Ironing Board Presses have 100 pounds pressure between upper iron plate and lower ironing board. Pressure is less at ends of the boards, depending on press width, fabrics and garments.
Clamping mechanisms are in the middle of the press and lose some pressure at the ends You can equalize the pressure using press cloths at one or both ends. We have few complaints in 38 years. It is not a problem on shorter boards like Elna. Miele and Singer rotary presses are best for equal pressure. John.Douthat@AllBrands.com, Owner and Tech.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Assembly, Parts, Warranty, Operation Instructions for Family Press Digital Fabric Steam Presses
- 212°-392°F Temperature range (100-200C)
- Largest steam press at 36" x 11"
- Steam and dry capabilities
- 1600 Watts or power with steam burst
- 100 lbs of pressure
- LED Temperature display
- Stores vertically for easy storage
- Audible safety alarm
- Non-stick teflon heating plate
- Timed safety auto shutoff
- 110V
- Instruction Manual
- Weighs 32lbs.

97025: Singer ESP36T1 Intelligent 36" Steam Ironing Board Press |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
The SINGER® Steam Press is an easy at home fabric care product designed to save you time, money and provides dry cleaning results at home.
The SINGER® Steam Press is an easy at home fabric care product designed to save you time, money and provides dry cleaning results at home. With a 36" pressing surface and 300 ml, it will help you power through any craft and garment care.
Since 1851, SINGER® has been the trusted leader in fabric and garment care. We have applied over 160 years of experience working with fabrics to develop our new durable, consumer-inspired garment care products. Singer is the educational source to teach our consumers how to best care for their garments so that they can feel confident and look their best.
Non-US Warranty: 30 days parts and labor.
Specifications
- 36" Press Surface
- Dry Cleaning Results at Home Saves Money on Your Dry Cleaning Bill
- Professional Steam Output - Continuous Steam and On-Demand Burst of Steam
- Non-Stick Pressing Surface Heats up to Nylon Setting in 108 Seconds
- 300 ml. Tank Capacity
- 1.8 minute heat-up time (Nylon setting)
- 5 fabric settings
- 1800 watts
- 80 g/min steam rate
- Auto Shutoff, Alerts if left on
- Compatible Stand: ST-09H
With 36" x 18" of pressing space, and powerful bursts of steam at your fingertips, this press is prefect for sewists, crafters and "ironers". Press your garments, tablecloths, etc. in record time. Get perfect fusing of interfacing, applique webbing and other fusibles. Heat press seams and embroidery stitches to eliminate puckering.

14036: Singer ESP2 Electronic Magic Steam Ironing Press 24x9” Board |
Our Price: $269.99 Prices are subject to change, and only current prices will be honored.
Availability: OUT OF STOCK
Condition: New In Box
|
Features
- Accurate Electronic Fabric Temperature Settings
- Powerful Burst of Steam removes stubborn wrinkles
- Easy to Fill Water Tank
- Die-Cast Aluminum Base for easy, steady pressing
- Auto Shut-Off with Audible Alarm
- Locks for Easy Portability and Storage
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Singer Steam Press ESP2 features a Steam Press with powerful bursts of steam; Variable Heat and steam selections; Large pressing surface opens wide for larger items; Auto Shut-off with audio alarm; Portable comfortable handle for easy grip; Washable Pad Cover, Includes Spray Bottle, Measuring Cup, and Pressing Cushion.
Get the fresh from the cleaners look for everything from curtains to table cloths and shirts to slacks. With a large pressing surface and wide opening consumers can quickly have professional results in half the time of typical ironing. Adjustable heat settings and steam selections allow a wide variety of fabric types to be safely pressed.

|
Our Price: $249.00 Prices are subject to change, and only current prices will be honored.
Availability: ON BACKORDER
Condition: Factory Serviced
|
Features
The Aria’s large pressing surface, impressive steam volume, powerful steam extraction and accurate digital thermostat ensures that event the toughest fabrics will be wrinkle-free and pressed just right.
AN ALL NEW WAY TO PRESS
The all-new Aria 100SP with steam extraction is the ideal choice for those looking for an alternative to conventional ironing. With a pressing area 8x the size of an iron, the Aria 100SP will quickly eliminate wrinkles and put a crease into the toughest fabrics.
SAVE TIME IRONING
With such a large pressing surface, the Aria 100SP will cut down on ironing time by as much as 70%. It’s easy to use, just pull the handle down, press for steam, and leave in the closed position until the buzzer sounds. It's that simple.
FEATURES
- 410º F maximum temperature
- 1600W heating element
- Non-stick coating
- Safety alarm and auto shut-off
- Childproof safety lock
- Hi-Tec woven press cover with pad
- Accessory kit - pressing cushion, spray and water bottle
Extended US Warranty: 90 days on labor, parts/adjustments, 1 year repair on defects in material/workmanship excluding wear and tear components
Non-US Warranty: 30 days parts and labor.
Specifications
Instruction Manual for Reliable 100SP/200SP Reliable 100SP Aria Digital Steam Press 28x11" Vacuum Board Aria Digital Steam Press 28x11" Vacuum Board
Reduce your ironing time as much as 70% with Reliable Digital Steam Press. It has an oversized pressing area that’s 8X larger than a conventional iron. Plus, there’s plenty of steam to quickly remove wrinkles or easily add a crease to the toughest fabrics.
• Oversize steam press — 8X larger than a conventional iron
• Large pressing area (28”x11”) cuts down on ironing time by as much as 70%
• Easy to use: pull the handle down, press for steam, and leave in the closed position until the buzzer sounds
• Safe for nylon, silk, rayon, wool, cotton and linen
• Wide opening allows the operator to quickly and safely lay the fabric down — there is no risk of touching the hot upper pressing plate as fabrics are placed onto the press
• Steam extraction vacuum motor removes the steam moisture from the fabric, ensuring a “crisp and clean” finish for all fabrics
• Digital thermostat ensures accurate temperature for optimum results
• Large capacity water reservoir: 1 pt. (500ml)
• Easy to grip ergonomic handle with steam button in the center
• A gentle squeeze activates the steam
• Rests on any flat surface
• Optional stand available at SharperImage.com
• One-year limited warranty

|
Our Price: $229.00 Prices are subject to change, and only current prices will be honored.
Availability: ON BACKORDER
Condition: New In Box
|
Features
On Backorder Consider the Dragonfly DFSP- 810 28x10" Electronic Steam Press
Ironing pressing surface is 7 times larger than regular hand irons you have to push, press down and pull back and forth.
- Works for all types of clothing:
Pleated skirts, pants, blouses, shirts, ties, cloth belts, and scarves.
- Extra large 32" x 10" pressing board
Non-stick Teflon pressing surface is approximately 9 times of standard irons. No other press in the market offers a pressing area close to the DFSP-810L
- Be able to press the entire inseam of your pants.
- 1500-Watts of power -- the most powerful steam press in the market.
- Powerful steam burst at a press of button
- Digital control and LED lights for power, correct temperature, and steam.
- 100 Pounds Pressing Pressure.
- 10 oz water capacity
- Portable and easily stored.
- Auto shut-off if down over 10 seconds; Auto shut-off if left up for over 15 minutes.
- Safety Approvals: CE, GS, ETL certified.
Any commercial use voids manufacturer and dealer warranty provisions
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Application Power: 110-120V, 60Hz;
Power: 1500 Watts
Pressing Plate Size: 32" x 10"
Measurement: 35.4" x 10.4" x 23.8"
Weight: 30.87 lbs.

11276: Family Press Inspire 32x10" Home Use Steam Ironing Board 1600W 110V 26Lb |
Our Price: $375.00 Prices are subject to change, and only current prices will be honored.
Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box
|
Features
Compare to Ricoma and Reliable larger 34x11", ETL Approved. A steam press for HOME USE that you can get the inseam length of most pants onto the pressing boards!
This Family Press Inspire 32 replaces the older Family Press FP202L model. The main differences are that the curcuit boards have been updated, the handle with steamburst has been improved, but the size and specifications are the same as the FP202L .
The initial shipments of the 32"x10" Family Press FP202L come in the same, color carton as the 26x10" Family Press FP202E and the instruction book has not yet been updated for the larger board size. Neither has the model number on the back of the press, which still says FP202E. You can verify that the press you receive is the new 32x10" bed size. Please measure the 32x10" board dimensions to be sure. In that case, you have the correct long board press, regardless of the FP202 model number suffix on the back. John Douthat
The
Yamata Family Press is the first and most advanced electronic steam press. The 32x10" FP-202L comes with the most accurate settings and safety features while incorporating features available with regular steam presses.
More
Yamata FP202L Features:
- Works for all types of clothing: pleated skirts, pants, blouses, shirts, ties, cloth belts, and scarves. Also tablecloths, napkins, sheets, pillowcases, etc.
- 32" by 10" pressing board dimensions
- 100 Pounds Pressing Pressure
- Safety Feature: Auto shut-off if down over 10 seconds
- Safety Feature: Auto shut-off if left up for over 15 minutes
- Includes sleeve pad and spray bottle
- Portable an easily stored
- LED lights for power, correct temperature, and steam
- Instruction Manual
- Digital control and LED lights for power, correct temperature, and steam.
- Extra large 32" x 10" pressing board - non-stick Teflon pressing surface is approximately 9 times of standard irons. No other press in the market offers a pressing area close to the FP202L.
- Any commercial use voids manufacturer and dealer warranty provisions.
Please note: For home use only.
Note: Home Ironing Board Presses have 100 pounds pressure between upper iron plate and lower ironing board. Pressure is less at ends of the boards, depending on press width, fabrics and garments.
Clamping mechanisms are in the middle of the press and lose some pressure at the ends You can equalize the pressure using press cloths at one or both ends. We have few complaints in 38 years. It is not a problem on shorter boards like Elna. Miele and Singer rotary presses are best for equal pressure. John.Douthat@AllBrands.com, Owner and Tech.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Assembly, Parts, Warranty, Operation Instructions for Family Press Digital Fabric Steam Presses
-
Application Power: 110-120V, 60Hz
-
Power: 1600 Watts (Only one on the market)
-
Pressing Plate Size: 32x10" (630x260mm) Largest!
-
Measurement: 35.4W x 10.4H x 23.8D in
-
Net Weight: 26.4 lbs.
-
Gross weight: 30.87 lbs.

81612: SteamFast SF-623 Mid-Size Fabric Steam Press 20" x 8" Pressing Surface |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
The Steamfast SF-623 Mid-Size Fabric Steam Press is your solution for a professional quality pressing in the comfort of your own home. Delivering dry-cleaners results without the hassle, cost or chemicals, the Steam Press smoothes wrinkles and creates crisp creases in seconds.
At the press of a button, bursts of hot steam penetrate deep into fabrics, relaxing fibers, releasing wrinkles and freshening clothes in seconds. The heated non-stick pressing plate safely presses a wide variety of fabrics, with selectable temperature settings categorized by types of material. With a larger pressing surface than conventional steam irons, the Mid-Size Fabric Steam Press is the fastest, easiest, and most cost-effective way to get the professional look you want.
- Faster And More Effective Than Ironing
- 5 Custom Fabric Settings
- Push-Button Steam Burst
- Non-stick Pressing Plate
- Auto-Shutoff
- Press Pad Included
- Two Dry Settings
- 20" x 8" Pressing Surface
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Watts: 1500
Water Capacity: 5.07oz
Heating Time: 3 min
Item Weight: 12.79 lbs.
Item Height: 6.73 in.
Item Depth: 20.47 in.
Item Width: 17.16 in.
PowerCord Length: 6.6 ft
PowerCord Plug Type: 3-Pin Grounded
Warranty: 1 year
Hertz: 60HZ
Volts: 120V
Amps: 12.5
Water Fill Method: Measuring Cup

|
Our Price: $2,199.00 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: Floor Model
|
Features
This page is for the B990 dry press, if you want the steam please order the HM 16-80 Here
Fastest pressing of flat fabrics up to 34" wide, or 68" folded tablecloths, napkins, drapery, curtains, pants, sheets, towels, pillowcases, bedspreads. Replaces B865 B863 B890.
NEW: *Add Optional $249 MieleCare 5 Year Extended Service & Repair Warranty Contract Performed by Miele Technicians in the USA for only $199 more! You can add to your order under Recommended Accessories below. AllBrands ships by common truck carrier in a specially designed and fabricated wood crate strapped to a 48x48" pallet to prevent any internal damage during shipping.
Sit and iron in comfort with the Miele rotary iron. This easy-to-use appliance has a wide roller that allows you to press everything from shirts and pants to bed linens and tablecloths, all with a crisp, professional finish. The electronically controlled roller speed can be adjusted to suit the type of laundry being pressed, and your own individual working speed. It is operated through the use of a foot pedal, allowing you to sit while you iron.
Professional Results
Sit and iron in comfort with the Miele rotary iron. Its versatile operation will enable you to give all your ironing a smart and professional finish.
While the rotary iron has design features comparable to much larger, industrial machines, it has specifically been designed for home use. Thanks to its clever fold-away mechanism and wheels, it can be stored in many places.
Wide-Width Roller
The wide roller width allows you to press everything from shirts and pants to bed linens and tablecloths. This unique product gently presses delicate lace or puts razor-sharp creases into pants.
Open-End Roller Design
The open end of the roller is particularly useful for ironing awkwardly shaped items such as shirts and blouses which can be fitted over the open end without being folded. The open end also allows for easy ironing of very wide items such as sheets and tablecloths.
Swing out bar for hanging laundry
Easy Folding
Finished work is automatically deposited on the laundry shelf beneath the roller in even, soft folds. The ample space between the shelf and the roller allows for large items to be pressed.
Comfortable Ironing with Extra Leg Room
The Miele rotary iron is very easy to use. By gently pressing the wide foot control bar, the heater plate contacts the roller which begins to rotate. Your hands are free to guide the laundry smoothly and accurately. The roller can be rotated by hand for ease when feeding in laundry.
Foot pedal operated
Three Temperature Settings
Finger Guard
The wide space between the hotplate and the roller makes it very easy to feed in the items being ironed. An automatic finger guard device is a special safety feature. If, during the ironing process, your fingers come too close to the hotplate, a safety switch will stop the roller rotation and lift the heater plate off the roller.
Emergency Release Button
Aluminum Feeder Board
Variable Roller Speed
The roller speed can be adjusted to suit the type of laundry being processed and the individual's working speed.
Fold Away Design
Transportation Wheels for Easy Maneuverability and Storage
The four rollers allow the rotary iron to be easily moved wherever you need to do your ironing. When folded away, the rotary iron requires minimal floor space; in fact, only a scant 2.4 sq.ft of space is required.
Do you aspire to set the most elegant table, with perfect napkins and a wrinkle-free tablecloth? Do you demand a high personal image reflected in smart appearance of your business and casual wardrobe?
If so, Miele invites you to sit and iron in comfort with the unique rotary iron.
This easy-to-use appliance has a wide roller that allows you to press virtually everything from blouses and pants to bed linens and tablecloths, all with a crisp and professional finish.
While the rotary iron has design features comparable to much larger, industrial machines, it has specifically been designed for home use and can be plugged into any 120-volt outlet.
Miele B990E White Rotary Iron - B990E. Professional Results, Wide Width Roller, Open End Design, Swing Out Bar For Hanging Laundry, Foot Pedal Operated, Three Temperature Settings, Finger Guard, Emergency Release Button, Aluminum Feeder Board, Variable Roller Speed, Fold Away Design, Transportation Wheels, White Finish
- Miele is a German manufacturer of high quality commercial equipment
- Miele is able to produce high-quality standards on its products by manufacturing all of its products on its own in nine factories in Germany
- Wide width roller allows you to press everything from shirts and pants to bed linens and tablecloths
- Unique design gently presses delicate lace or puts razor sharp creases into pants
- Large space between the roller and hot plate makes feeding in clothing easy and the open end accommodates larger, awkward items
- Cloth-covered roller rotates at a variety of speeds and is operated by a foot pedal, allowing you to sit while you iron
- Thanks to its clever fold-away mechanism and wheels, it can be accommodated in even the smallest room requiring less than 1/4 of a square meter of storage space, when not in use
- 34 in. wide heater plate is suitable for coping with large amounts of laundry
- Roller speed can be adjusted to suit the type of laundry being processed, and also to suit individual operator working speeds
- The free end of the roller is particularly useful for ironing awkward items such as skirts, blouses, nightshirts etc. as they can be fitted over the free end without having to be folded
- The roller can be rotated by hand for ease when feeding in laundry
- All important controls for ironing are conveniently situated on the control panel on the right hand side for easy operation
- As a special safety feature, an automatic finger guard device
- If, during the ironing process, your fingers come too to the heater plate, a safety switch will stop the roller rotation and lift the heater plate of the roller
- Features comparable to much larger, industrial machines, it has specifically been designed for domestic use
- Built-in wheels for easy transportation and folds away for easy storage
- Swing out bar for hanging laundry
Miele Rotary Press Video:
Do you remember the Original Mangle press from the 50's?
Original Mangle Press by Ironrite Ironer Co. of Detroit, Mi.
Download Manuals:
(For further technical information please click here)
Operating Manual
Quick Guide how to use the Rotary Iron
Click Here for Miele.com Manufacturer's Specification Page on B990E
Click HERE for all current You Tube Videos on Miele Rotary Irons
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Foot pedal operated
- Aluminum feeder board
- Height 37"
- Dimensions Open: 39-3/8" Wide x 37" High x 16-3/8" Deep
- Dimensions Closed: 19-5/8" Wide x 41-3/4" High x 16-3/8" Deep
- Weighs approximately 84 lbs
- Color - White
- 15 Amps, 120 Volts
- Shipped by FedEX Freight
Performance specifications:
Roller diameter: 16 cm
Roller length: 83 cm
Ironing throughput:15 kg/h according to DIN 11902 at 20% initial residual moisture
Control system
Infinitely variable temperature control
5 roller speed settings
Features
Polyester needle felt roller cover
Water reservoir for steam ironing
Treadle switch controls
Chrome-plated airing bar
Heating
Electric
Design
Return feed operation
Aluminum trough
Folding frame for ease of storage
H x W x D: 96 x 98 x 38 cm
H x W x D when folded: 105 x 50 x 38 cm
Safety feature
Patented finger guard
Manual trough release in event of power failure
Temperature limiter
Test certificates
VDE / CCA
EMV-CE
Please review our Freight LTL Shipping Policies Ships FedEx Ground Freight.
* For delivery please specify in the Above Option: "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if their is not a loading dock, or fork lift available for delivery.
* We also ship the Press in a custom made wood crate designed just for the B990E.

Singer Original 580 (Pfaff 580) Rotary Steam Press Ironer 33.5"W Continuous Feed Roller 120V, Refurbished with Blemishes |
Our Price: $2,499.00 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: RB Refurbished
|
Features
Last One! Easy Insertion and Removal of Garments, Folds up on Roller Casters for Storage, Takes Up The Same Storage Space As A Chair! Weighs 85 Pounds, 1.3L 2.74 Pint Water Reservoir Tank Lasts 4 Hours, 1800 Watts, 5 Temperature Settings, 3 Steam Settings, Continuous Feed 33" Wide Roller, 1.4-6.8 RPM. Same as Pfaff 580 Press in Europe but 110V instead of 220V operation.
AllBrands Exclusive! Heavy Duty All Wood Crating is added by AllBrands at no additional charge, to prevent damage in shipping to cardboard box and machine inside which weighs 85 pounds.
Important Choice! Miele B990 and Singer 580 rotary presses only come in 110V versions.
If you need 220V please select Miele HM16-80 33" Wide Rotary Steam Ironing Press with Continuous Feed and 220V
Advantage over Miele HM16-80 Rotary Steam Press is that the Singer 580 uses 16-20 Amp 120V power supply outlet for Household Operation instead of 220V Laundry Room Power Supply Requirement for the Miele HM1680. Singer 580, 110 volt machine designed for United States and Canadian use 110V Use Only.
With the SINGER 580 Rotary Steam Press you can experience the ultimate in ironing comfort as you perfectly press garments, bedding, and tablecloths from a seated position—in half the time of traditional ironing. Simply lay your fabric in the board and press the foot pedal. Immediately the 33"-wide rotary steam iron presses the fabric while steam powerfully eliminates even the most stubborn creases. Choose from any of the five temperature settings and three steam settings for perfect fabric control. Once you’re finished perfectly pressing your items, simple fold the rotary steam press and roll it out of the way.
SINGER 580 ROTARY STEAM PRESS
Roll Through Extra-Large Ironing Projects. Everyday household tasks are made easier with the SINGER® Rotary Steam Press.
Experience the ultimate in ironing comfort as you perfectly press garments, bedding, and tablecloths from a seated position—in half the time of traditional ironing. Simply lay your fabric in the board and press the foot pedal. Immediately the 33" wide roller begins to move and press the fabric while steam powerfully penetrates to eliminate even the most stubborn creases.
Additional Features & Benefits
1800 Watts. Delivers more steam
Five Temperature Settings
Linen, Cotton, Wool, Silk, Synthetic
Three Steam Settings
Low, Medium, High, plus Continuous and Burst of Steam buttons! No need to dampen anything before you iron!
Soft, Flexible Roller
Button-Down Shirts pose no problem.
Two Open Heating Shoe Ends
Allows you to iron all of the conventionally challenging ironing spots like cuffs and waistbands. Tubular pieces like t-shirts and skirts are manageable too!
Freshen High-Pile Fabrics like a Wool Sweater
Turn on continuous steam and pull the item over the steam slot. One pass is all that is needed to raise the fibers. Freshen a variety of fabrics including wool, velvet, corduroy and towels.
Use Tap Water or Distilled Water
If tap water is used, please use in conjunction with the included Lime Descaling Granulate.
Burst of Steam
Press the Burst of Steam button for on-demand steam at your fingertips
Continuous Steam Button
When this button is activated, constant steam is generated, even without the foot controller.
Auto Off
If the foot pedal is left untouched for 8 minutes, the heater and steam generator are automatically turned off.
Convenient Wheels
Allow you to move to any room
Iron Comfortably While Sitting Down
No more tired legs or back.
Complete Roller Control
You control the roller speed, steam and ironing pressure
Washable Ironing Pad
Keeps surface clean, allowing fabrics to flow smoothly
1.3L (2.74 Pints) Water Tank
Fill up the water tank and you can iron for up to four hours! The indicator level on the control panel alerts you when water is low.
Dimensions in Working Position
36.5” Length x 13” Width x 41” Height
Dimensions in Folded Position
20.5” Length x 17.75 Width x 39.5” Height
Weight 39kg or 86 pounds
Consumer's Choice
More people own SINGER machines than all other brands combined.
Its longer 33.5" 850mm roller, meaning a larger pressing surface, makes it particularly convenient for pressing larger laundry items such as towels, tablecloths and bed linen. Of course it can handle more complex pieces in your wardrobe too, such as shirts, blouses, and perfectly pressed trousers
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Product Brochure from Singer or Pfaff 580 Rotary Steam Press
Instruction Manual for Singer Pfaff 580 Rotary Steam Press
List of Spare Parts for Singer Pfaff 580 Rotary Steam Press
Service Manual for Singer Pfaff 580 Rotary Steam Press
TECHNICAL SPECIFICATIONS
- Dimension, Working Position: 36.5" W x 13" D x 41" H
- Dimension, Folded Down Position: 20.47" W x 17.75" D x 39.40" H
- Weight 39kg or 86 pounds
- Weight: 85 lbs
- Roller Size: 33"
- Water Tank Capacity: 2.74 pints
- Excess Temperature Fuse: 421/500 F
(steam generator / heating shoe)
- Nominal Voltage (60 Hz): 120V
- Power Consumption ( max.): 1800 KW
- Fuse ( home wiring ) 421/500 F at least: 16 A
- Ironing Speed (rpm): 1.4 - 6.8
- 33” Soft-Sided Roller
- Tablecloths and sheets are done in no time, garments are a snap
- Open Roller
- Easy access to the heating element and roller from either side
- Complete Roller Control
- Speed is easily adjusted
- Five Temperature Settings
- Safely press fine silk to heavy wool
- Perfect Steam Control
- Control of the amount of steam emitted, even if it’s none!
- Burst of Steam
- Stubborn wrinkles will disappear
- Continuous Steam
- Quickly freshen velvets and sweaters
- Washable Ironing Pad
- Keeps surface clean, allowing fabrics to flow smoothly
- Easy to Move
- Rolling castors make the unit easy to roll out of the way when finished
- Folds for Storage
- Rotating roller unit allows storage in a small square foot area
- 1800 Watts
- Water Tank holds 1.3L
Watch Hayley West demonstrating how easy it is to iron a shirt using the same Pfaff Roller Steam Press. Once you have mastered the basics, we are confident you will be ironing shirts in less than 2 minutes and all in the comfort of your chair!
Do you remember the Original Mangle press from the 50's? Singer 580 Rotary Steam Press now with Steam, has adopted the same exclusive and original features of open on both ends of roller and bottom instead of top ironing shoe placement as Ironrite had before they were discontinued.
Original Mangle Press by Ironrite Ironer Co. of Detroit, Mi.
Parts List for the Singer 580 Rotary Steam Iron
1 Ironing roller
2 Heating shoe with steam slot
3 Operator’s console control buttons
4 Filler opening with lime descaling cartridge
5 Support plate
6 Manual release lever
7 Free heating shoe ends
8 Bolt for unfolding
9 Water tank
10 Drain plug
11 Collecting table
12 Foot pedal
13 Power button
14 Heat Setting buttons with red LEDs
15 Continuous Steam button with blue LED
16 Demand Steam button with blue LED
17 Steam Setting buttons with blue LEDs
18 Power On button with green LED
19 Remaining Water button with blue LED
20 Descaling Granulate Used button with blue LED
21 Locking lever for unfolding
22 Identifi cation plate
23 Power cable
24 Cable hook
25 Spare lime descaling cartridge

|
Our Price: $2,799.00 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Compare Reliable Verve 100SR (same as Singer Pfaff 580) 110V Steam Rotary Presses to Miele HM1680 220V Steam Rotary Press for $1000 More, All of them Made in Europe!
Free Shipping by Commercial Freight Truck is only to a Commercial Address with an Unloading Dock.
Delivery to a Residential Address with a Lift Gate on the back of the truck is $100 More. JMD
PROFESSIONAL RESULTS:The Verve 100SR rotary steam press is a modern take on the mangle from the past. Commercial rotary design and easy-to-use controls make it an ideal tool for those with a passion for pressing. Best in class and value with variable steam function. Press the old-fashioned way - with the ease of modern technology.
COMPLETE PRESSING SOLUTION:Large sheets can be cumbersome and clumsy to press with a regular iron. The Verve 100SR takes the hassle out of pressing large items while saving precious time. The 33” open end roller can be fed from both sides. It will accommodate a wide variety of clothing as well. The steam function makes quick work of large tasks.
FEATURES:
• Three steam settings
• Variable speed control
• Open end roller - dual end feed
• Folds easily for compact storage
• 5 temperature settings
• 1800W heating element
• Safety release lever
• Acoustic hard water indicator
• Spare descaling cartridge included
Rotary Cylinder Press Arm is Open at Both Ends for Easy Insertion and Removal of Garments, Folds up on Roller Casters for Storage, Takes Up The Same Storage Space As A Chair! Weighs 85 Pounds, 1.3L 2.74 Pint Water Reservoir Tank Lasts 4 Hours, 1800 Watts, 5 Temperature Settings, 3 Steam Settings, Continuous Feed 33" Wide Roller, 1.4-6.8 RPM. Same as Pfaff Singer 580 Press in Europe but 110V instead of 220V operation.
Important Choice! Miele B990 Dry Press and Reliable Verve 100SR steam rotary presses only come in 110V versions. If you need 220V please select Miele HM16-80 33" Wide Rotary Steam Ironing Press with Continuous Feed with 220V only.
Advantage over Miele HM16-80 Rotary Steam Press is that the Reliable Verve 100SR uses 16-20 Amp 120V power supply outlet for Household Operation instead of 220V Laundry Room Power Supply Requirement for the Miele HM1680 steam press. Reliable Verve 100SR 110 volt machines are designed for United States and Canadian 110V Use Only.
With the Reliable Verve 100SR Rotary Steam Press you can experience the ultimate in ironing comfort as you perfectly press garments, bedding, and tablecloths from a seated position—in half the time of traditional ironing. Simply lay your fabric in the board and press the foot pedal. Immediately the 33"-wide rotary steam iron presses the fabric while steam powerfully eliminates even the most stubborn creases. Choose from any of the five temperature settings and three steam settings for perfect fabric control. Once you’re finished perfectly pressing your items, simple fold the rotary steam press and roll it out of the way.
Reliable Verve 100SR Rotary Steam Press
Roll Through Extra-Large Ironing Projects. Everyday household tasks are made easier with the new Reliable Verve 100SR.
Experience the ultimate in ironing comfort as you perfectly press garments, bedding, and tablecloths from a seated position—in half the time of traditional ironing. Simply lay your fabric in the board and press the foot pedal. Immediately the 33" wide roller begins to move and press the fabric while steam powerfully penetrates to eliminate even the most stubborn creases.
Additional Features & Benefits
1800 Watts. Delivers more steam
Five Temperature Settings
Linen, Cotton, Wool, Silk, Synthetic
Three Steam Settings
Low, Medium, High, plus Continuous and Burst of Steam buttons! No need to dampen anything before you iron!
Soft, Flexible Roller
Button-Down Shirts pose no problem.
Two Open Heating Shoe Ends
Allows you to iron all of the conventionally challenging ironing spots like cuffs and waistbands. Tubular pieces like t-shirts and skirts are manageable too!
Freshen High-Pile Fabrics like a Wool Sweater
Turn on continuous steam and pull the item over the steam slot. One pass is all that is needed to raise the fibers. Freshen a variety of fabrics including wool, velvet, corduroy and towels.
Use Tap Water or Distilled Water
If tap water is used, please use in conjunction with the included Lime Descaling Granulate.
Burst of Steam
Press the Burst of Steam button for on-demand steam at your fingertips
Continuous Steam Button
When this button is activated, constant steam is generated, even without the foot controller.
Auto Off
If the foot pedal is left untouched for 8 minutes, the heater and steam generator are automatically turned off.
Convenient Wheels
Allow you to move to any room
Iron Comfortably While Sitting Down
No more tired legs or back.
Complete Roller Control
You control the roller speed, steam and ironing pressure
Washable Ironing Pad
Keeps surface clean, allowing fabrics to flow smoothly
1.3L (2.74 Pints) Water Tank
Fill up the water tank and you can iron for up to four hours! The indicator level on the control panel alerts you when water is low.
Dimensions in Working Position
36.5” Length x 13” Width x 41” Height
Dimensions in Folded Position
20.5” Length x 17.75 Width x 39.5” Height
Weight 39kg or 86 pounds
Its longer 33.5" 850mm roller, meaning a larger pressing surface, makes it particularly convenient for pressing larger laundry items such as towels, tablecloths and bed linen. Of course it can handle more complex pieces in your wardrobe too, such as shirts, blouses, and perfectly pressed trousers
Extended US Warranty: 90 days on labor, parts/adjustments, 1 year repair on defects in material/workmanship excluding wear and tear components
Non-US Warranty: 30 days parts and labor.
Specifications
Reliable Verve 100SR Rotary Steam Press - Pressing Linens. The Verve 100SR rotary steam press is a modern take on the Mangle from the past. Made with precision craftsmanship and commercial grade machining in the Czech Republic the Reliable Verve has firm roots in the centuries old art of pressing. Easy-to-use controls are designed to safely assist beginners and skilled operators alike. This is truly the best in class with a value second to none with variable steam and temperature settings all at a voltage of 120. No need to arrange any electrical work. Plug and go!
Electrical: 120V
Element: 1800W
Roller Size: 33” (84cm)
Maximum Temperature: 500°F (260°C)
Water Tank: 5.5 cups (1.3L)
Ironing Speed: 240 to 680 RPM
Temperature Control: Digital
Automatic Shut-off: Standard
Automatic Wake-up: Standard
Net Weight: 85 lb (35.5 kg)
Shipping Weight: 101lb (46kg)
Product Dimensions: 36.5“x13“x41“
Shipping Dimensions: 43”x20.5“x25” (wood crate)
Country Of Origin: Czech Republic
Electrical Approval: cETLus
Warranty: Limited 1 year
Information Sheet on Reliable Verve 100SR Rotary Steam Press
Instruction Manual on Reliable Verve 100SR Rotary Steam Press
List of Spare Parts for Reliable Verve 100SR, Singer and Pfaff 580 Rotary Steam Presses
Service Manual for Reliable Verve 100SR, Singer and Pfaff 580 Rotary Steam Presses
TECHNICAL SPECIFICATIONS
- Dimension, Working Position: 36.5" W x 13" D x 41" H
- Dimension, Folded Down Position: 20.47" W x 17.75" D x 39.40" H
- Weight 39kg or 86 pounds
- Weight: 85 lbs
- Roller Size: 33"
- Water Tank Capacity: 2.74 pints
- Excess Temperature Fuse: 421/500 F
(steam generator / heating shoe)
- Nominal Voltage (60 Hz): 120V
- Power Consumption ( max.): 1800 KW
- Fuse ( home wiring ) 421/500 F at least: 16 A
- Ironing Speed (rpm): 1.4 - 6.8
- 33” Soft-Sided Roller
- Tablecloths and sheets are done in no time, garments are a snap
- Open Roller
- Easy access to the heating element and roller from either side
- Complete Roller Control
- Speed is easily adjusted
- Five Temperature Settings
- Safely press fine silk to heavy wool
- Perfect Steam Control
- Control of the amount of steam emitted, even if it’s none!
- Burst of Steam
- Stubborn wrinkles will disappear
- Continuous Steam
- Quickly freshen velvets and sweaters
- Washable Ironing Pad
- Keeps surface clean, allowing fabrics to flow smoothly
- Easy to Move
- Rolling castors make the unit easy to roll out of the way when finished
- Folds for Storage
- Rotating roller unit allows storage in a small square foot area
- 1800 Watts
- Water Tank holds 1.3L
Do you remember the Original Mangle press from the 50's? Reliable Verve 100SR Rotary Steam Press now with Steam, has adopted the same exclusive and original features of open on both ends of roller and bottom instead of top ironing shoe placement as Ironrite had before they were discontinued decades ago in the last century.
Original Mangle Press by Ironrite Ironer Co. of Detroit, Mi.
Parts List for the Reliable Verve 100SR Rotary Steam Iron
1 Ironing roller
2 Heating shoe with steam slot
3 Operator’s console control buttons
4 Filler opening with lime descaling cartridge
5 Support plate
6 Manual release lever
7 Free heating shoe ends
8 Bolt for unfolding
9 Water tank
10 Drain plug
11 Collecting table
12 Foot pedal
13 Power button
14 Heat Setting buttons with red LEDs
15 Continuous Steam button with blue LED
16 Demand Steam button with blue LED
17 Steam Setting buttons with blue LEDs
18 Power On button with green LED
19 Remaining Water button with blue LED
20 Descaling Granulate Used button with blue LED
21 Locking lever for unfolding
22 Identifi cation plate
23 Power cable
24 Cable hook
25 Spare lime descaling cartridge
Reliable Corporation (“Reliable”) warrants to original purchaser of its products that every product sold by Reliable (a “Reliable Product”) is free from defects in material and workmanship for a period of one year from the date of purchase, if properly used and maintained. Subject to the conditions and limitations set forth below, Reliable will either repair or replace any part of a Reliable Product that proves defective by reason of improper workmanship or materials. If the defective Reliable Product is no longer available and cannot be repaired effectively or replaced with an identical model, Reliable shall replace the defective
Reliable Product with a current Reliable Product of equal or greater value. Repaired parts or replacement products will be provided by Reliable on an exchange basis, and will be either new or refurbished to be functionally equivalent to new. If Reliable is unable to repair or replace a Reliable Product, it will refund the current value of that Reliable Product at the time the warranty claim is made.
This limited warranty does not cover any damage to a Reliable Product that results from improper installation, accident, abuse, misuse, natural disaster, insufficient or excessive electrical supply, abnormal mechanical or environmental conditions, wear and tear resulting from normal use of the product, or
any unauthorized disassembly, repair, or modification. This limited warranty does not extend to any indirect, consequential or incidental damages that may be suffered by a user or from the use of a Reliable Product, including without limitation, any liability for third party claims for damage, and is limited to the amount paid by the original purchaser Reliable Product with respect to which this limited warranty protection applies. This limited warranty does not apply with respect to products that have been altered or which are missing serial numbers or for products not purchased directly from Reliable or a dealer authorized by us to sell Reliable Products.
This limited warranty is the only warranty that applies to any Reliable Product, supersedes any and all terms that may be contained in any other document or purchase order and may not be altered or amended except expressly in writing by Reliable. To obtain a repair or replacement under the terms of this warranty, please contact our customer service group at 1-800-268-1649 or at support@reliablecorporation.com. You will be required to submit an original receipt via fax or
e-mail. The receipt must reflect that you are the original purchaser, the product was bought directly from us or from an authorized Reliable dealer and that the warranty claim is being made within the warranty period. You will be issued a return authorization number (RA#) and asked to ship the defective product
together with proof of purchase and RA#, prepaid insured to the following address: Reliable Corporation, 5-100 Wingold Avenue, Toronto, ON M6B 4K7. Freight collect shipments will be refused. The risk of loss or damage in transit will be borne by the customer. Once Reliable receives the defective product, it
will initiate the repair or replacement process. If you have any questions regarding these warranties, you may write to:
Reliable Corporation
100 Wingold Avenue, Unit 5
Toronto, Ontario
Canada M6B 4K7
www.reliablecorporation.com

2683: Miele B990E Rotary Ironing Press 34" Continuous Feed 95-340°F |
Our Price: $2,999.00 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
ETA this month!
Important Choice! Miele B990 Dry Press only comes in 110V. If you need 220V please select Miele HM16-80 33" Wide Rotary Steam Ironing Press with Continuous Feed and 220V
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
Miele brings the rotary iron into your home. The wide width roller allows you to press everything from shirts and pants to bed linens and tablecloths. The rotary iron has wheels for easy transportation and folds away for easy storage.
Since 1899, Miele has been dedicated to producing state-of-the-art home appliances, and we support your passion for a crisp, professional finish on your linens with our rotary irons. Its versatile operation will enable you to give all your laundry a smart finish. While the rotary iron has design features comparable to much larger, industrial machines, it has specifically been designed for home use and can be plugged into any 120-volt outlet, adding that crowning touch to your family’s laundry.
NEW: *Add Optional $249 MieleCare 5 Year Extended Service & Repair Warranty Contract Performed by Miele Technicians in the USA for only $199 more! You can add to your order under "Recommended Accessories" below.AllBrands ships by common truck carrier—strapped to a 48x48" pallet to prevent any internal damage during shipping.
Do you demand a high personal image, reflected in the smart, sharp appearance of your business and casual wardrobe? Are you someone who aspires for a perfect, pressed look to your dining area and garments? Do you want to set the perfect table, with the most elegant arrangement, perfect napkins, and a wrinkle-free tablecloth?
If so, Miele has the solution.
Treat yourself to professional results and ironing in luxury with the Miele B990 rotary iron. This easy-to-use appliance utilizes a wide press roller, allowing you to press everything from shirts and pants to bed linens and tablecloths—all with a crisp, professional finish. The electronically-controlled roller speed can be adjusted to suit the type of laundry being pressed, as well as your own individual working speed. This function is easily operated through the use of a foot pedal, allowing you to sit and relax while you iron.
Miele is a German manufacturer of high quality commercial equipment, and is able to enforce the highest standards on its products by manufacturing all of its products in its nine privately-owned factories.
The Miele B990 Rotary Press Instruction Manual
Professional Results
Sit and iron in comfort with the Miele rotary iron. Its versatile operation will enable you to give all your ironing a smart and professional finish. While the rotary iron has design features comparable to much larger, industrial machines, it has specifically been designed for home use. Thanks to its clever fold-away mechanism and wheels, it can be stored in many places.
Wide-Width Roller
The wide roller was designed for versatility and easy of ironing. The expanded width allows greater control over efficiency and speed, allowing you to press everything from shirts and pants to bed linens and tablecloths. This unique product gently presses delicate lace or puts razor-sharp creases into pants.
Open-End Roller Design
The open end of the roller is particularly useful for ironing awkwardly shaped items such as shirts and blouses, which can be fitted over the open end without having to be being folded. The open end also allows for easy ironing of very wide items, such as sheets and tablecloths.
Swing out bar for hanging laundry
A simple yet all too absent function of iron presses, the swing out bar is designed to speed up your ironing, allowing for quick and easy manipulation of your clothes. Furthermore, it collapses down with the rest of the machine for easy storage.
Easy Folding
Finished work is automatically deposited on the laundry shelf beneath the roller in even, soft folds. The ample space between the shelf and the roller allows for large items to be pressed.
Comfortable Ironing with Extra Leg Room
The Miele rotary iron is very easy to use. By gently pressing the wide foot control bar, the heater plate contacts the roller which begins to rotate. Your hands are free to guide the laundry smoothly and accurately. The roller can be rotated by hand for ease when feeding in laundry.
Foot Pedal Operation
Easy control of the device comes from the touch-sensitive foot pedal, a large bar built across the bottom of the B990 Rotary Iron for convenient access.
Three Temperature Settings
The temperature range is marked by dots and fabric controls on the ring around the temperature selector. These correspond with the international fabric care symbols for ironing. One dot is for the minimum temperature setting which is perfect for synthetics; two dots for mid-range temperature, ideal for woolens and silks; and, three dots for the highest setting... perfect for linens and cottons.
A glimpse of the machine in operation.
Finger Guard
The wide space between the hotplate and the roller makes it very easy to feed in the items being ironed. An automatic finger guard device is a special safety feature. If, during the ironing process, your fingers come too close to the hotplate, a safety switch will stop the roller rotation and lift the heater plate off the roller.
Emergency Release Button
This special safety function kicks if your fingers come too close to the heater plate. This automatically stops the roller rotation and lifts the heater plate off of the roller.
Variable Roller Speed
The roller speed can be adjusted to suit the type of laundry being processed and the individual's working speed.
Fold Away Design and Transportation Wheels
The four rollers allow the rotary iron to be easily moved wherever you need to do your ironing. When folded away, the rotary iron requires minimal floor space; in fact, only a scant 2.4 sq.ft of space is required.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
General:
Dimensions (Open): 39-3/8" Wide x 37" High x 16-3/8" Deep
Dimensions (Closed): 19-5/8" Wide x 41-3/4" High x 16-3/8" Deep
Weight: Approximately 84 lbs
Color: White
Power: 15 Amps Plug Rating, 120 Volts
Shipping: FedEX Freight
Performance specifications:
Roller diameter: 16 cm
Roller length: 83 cm
Ironing throughput: 15 kg/h according to DIN 11902 at 20% initial residual moisture
Control system:
-Infinitely variable temperature control
-5 roller speed settings
Features:
Polyester needle felt roller cover
Treadle switch controls
Chrome-plated airing bar
Heating: Electric
Design:
-Return feed operation
-Aluminium trough
-Folding frame for ease of storage
H x W x D (when unfolded): 96 x 98 x 38 cm
H x W x D (when folded): 105 x 50 x 38 cm
Safety features:
- Patented finger guard
- Manual trough release in event of power failure
- Temperature limiter
Test certificates:
VDE / CCA
EMV-CE
Please review our Freight LTL Shipping Policies
Ships FedEx Ground Freight.
* For delivery please specify in the Above Option: "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if their is not a loading dock, or fork lift available for delivery.
*

82550: Miele B3847 Fashion Master Active Ironing Board and Steam Iron System |
Our Price: $2,499.00 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: ON BACKORDER
Condition: New In Box
|
Features
ETA by end of 2021! Steam ironing system with display and steamer for perfect ironing results and convenience.
- 4 Bar Steam Pressure
- Honeycomb Soleplate
- 1-2-Lift-System
- In-Board fan with Two Speed Settings
- Auto-Off
- Premium Ironing Table
- Handheld Steamer Attachment
Steamer Attachment
Get rid of unsightly creases and wrinkles in your jacket, blazer, evening gown or curtains with the steamer. It weighs only half as much as the iron but uses the same steam pressure and steam quantity.
The brush attachment raises the textile fibres and maintains a distance to the garment.
The steamer can also be used when the FashionMaster is folded up to save space.
Ironing Table Cover
Particularly robust Miele ironing board cover is distinguished by its heat-resistance and durability. The cover absorbs moisture perfectly and can be washed up to 40°C.
Honeycomb Structure Soleplate
Achieves best ironing results combined with gentle fabric care. Unlike conventional irons, steam is distributed quickly and evenly along the channels between the hexagons across the entire soleplate.
This creates a film of steam which allows the hand iron to glide effortlessly, but at the same time effectively, over the textile.
Steam
With up to 4 bar steam pressure and constant steam volume of 100 g/min, you can achieve professional ironing results with FashionMaster. The dry steam penetrates even the thickest material and consequently reduces ironing time.
You decide whether to work with bursts of steam or continuous steam by pressing the steam button on the iron.
Inflation Function
For everything that is to be smoothed but not flattened, the FashionMaster ironing board offers a blower function. The fan creates an air pocket between the garment and the ironing table so that frills, cashmere, etc. keep their shape.
This also helps to prevent seam impressions.
Suction Function
The extraction function built into the ironing board ensures deep penetration of the clothing with steam and reduces the formation of condensate.
Another effect is the textiles are secured on the ironing board and remain fixed in position during ironing.
Non-Stick Soleplate
For extra gentle care, use the attachable anti-stick soleplate, which can be used directly on fashionable adornments like sequins and prints.
It protects dark textiles from shiny spots with its Teflon coating without the necessity of ironing the textiles inside out.
CoolDown Function
Safety is a priority for Miele: consequently, movement sensors and monitoring of controls ensure that the iron switches off automatically if it is not used for about three minutes. It switches on again automatically when it is moved.
AutoOff Function
The entire appliance switches off automatically if the iron or steamer is not used for approximately 15 minutes. No need to worry whether you remembered to switch the iron off.
Time-Saving
There is a substantial advantage with the Miele rotary ironer: you can save 30% to 50% time, depending on the laundry, compared to a conventional steam iron. Valuable time which you can use for the better things in life.
Water Container
The user-friendly, flat design of the water container allows refilling even under low taps. The 1.25 litre capacity allows you to iron for approximately one hour non-stop.
Ironing Multi-Layered Items
Save physical effort and time. With the FashionMaster, multi-layered and bulky items now only need to be ironed on one side, not on both.
The large quantities of steam and high steam pressure mean that even thicker materials such as denim only have to be ironed on one side whilst still being smoothed perfectly.
Storage Compartments
There are two accessory compartments: the iron and cable holders are stored under the iron rest. The second compartment is in the appliance base. The connection cable, non-stick soleplate, steamer and other accessories are stored there.
When the FashionMaster is folded together, you do not see cables, the iron, etc., but instead its strikingly elegant design.
1-2-Lift System
Two steps, zero effort. With the patented 1-2 lift system, the complete appliance consisting of iron, steam generator and ironing board is set up in very simple steps.
Unlock and let it slide into a horizontal position - almost like magic. FashionMaster not only smooths your laundry, but it also takes the strain off your back.
Infinite Height Adjustment
With convenient and infinite height adjustments, you can set the ironing board exactly to your individual working height. Supported by a built-in gas-pressure stay, you can set a comfortable working height of 83 to 102 cm.
Rollers
Mobile and nimble: The FashionMaster stands firmly without requiring additional support even when folded-up, and can be positioned anywhere in your home.
With its soft castors, the FashionMaster can be moved effortlessly and follows you wherever you go. It takes door thresholds, carpet edges and even the odd step or two in its stride.
Comfort Zone
Measuring 120 x 40 cm, the ironing board even provides sufficient space for long trouser legs. It's designed for you to iron the entire front of a blouse or shirt in a single process without having to re-position the yoke.
Automatic Descaling
Once you have selected the water hardness before the first use, the appliance automatically determines the required descaling cycle and reminds you in a timely manner. The descaling process is started simply at the touch of a button.
The display asks you to add a suitable descaler and then starts automatically.
Automatic Rinsing
Mineral residue left behind by the evaporation process must be regularly removed by rinsing the steam generator to ensure consistent performance.
The FashionMaster calculates rinse intervals automatically based on the volume of water evaporated. When it is time to do so, rinsing takes place immediately after you switch on the FashionMaster.
The only matter to take care of is to empty the residual water container.
Guided First Use
Prior to the first use of the FashionMaster, the appliance will guide you through the most important settings. You only select the language for the appliance information and set the water hardness.
The appliance now automatically selects the optimum descaling cycle. This maintains your FashionMaster in the best possible manner and ensures a long service life.
Miele B 3847 Fashionmaster tested by men. Today the men once again test the achievements of the girls the Miele B 3847 Fashionmaster steam ironing station. They are not very enthusiastic about the Miele steam ironing station, which is probably due to ironing.
Review.com Hands-On with the Miele FashionMaster B3312 Ironing System
See More Videos on Miele Fashion Master Ironing System
Miele Fashion Master Website
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Operating Instructions Miele B3847 Fashion Master Steam Ironing System
Guarantee for Miele B3847 Fashion Master Steam Ironing System
Design
-
Appliance color: Lotus white
-
Iron color: Anthracite/Lotus white
-
Ironing board color: Anthracite
-
Display: Single line
- Perfect ironing results
- Chrome-plated aluminum honeycomb soleplate
-
Steam Pressure in Bar: 4.0
- Vertical Steam
- Steam Pulse
- Continuous Steam
- Steamer
- Active Ironing Table (Inflation and Suction Function)
- 2-Stage Fan
- Non-stick Soleplate
Time-Saving Ironing
-
Water container volume in gallons: 0.33
- Removable Water Container
- Ironing Multi-layered Items
User Convenience
- All-in-one/1-2 Lift system
-
Infinitely variable height adjustment with gas pressure stay, in inches: 33-40
- Selection of water hardness
- Automatic fan switch-on/off
- Fan Memory Function
- Prompted Descaling
- Automatic Rinsing
- Storage compartment for iron
- Storage compartment for power cord
Safety
- Cool Down function
- Auto Off function
Unit Data
-
Weight in Lbs.: 66
-
Dimensions (Folded): 19"x50"x15"
-
Dimensions (Set Up): 19"x38"x58"
-
Dimensions (Packaging): 54"x18"x20"
-
Connection Cable: 98"
- Hand Iron
Rated Loads
-
Rated Voltage: 120v
-
Fuse Rating: 15A
-
Rated Load: 1.7kW
-
Nominal Rating: 1700W
Product details - B 3847 FashionMaster
Design
Iron color
Anthracite/lotus white
Ironing board cover color
Anthracite
Perfect ironing results
Honeycomb soleplate
•
Steam pressure in bar
4.0
Steam quantity in g/min
100
Vertical steam
•
Steam starting from temperature level
2
Steam burst
•
Continuous steam
•
Steamer
•
Lift function
•
Second blower power level
•
Non-stick soleplate
•
Time-saving ironing
Water container volume in l
1.25
Removable water container
•
Permanently refillable water container
•
Ironing multi-layered items
•
Control panel
All-in-one
•
1-2-Lift-System
•
Infinitely variable height adjustment with gas lift mechanism in mm and in
830-1.020
Castors gentle on the floor
•
Ironing board with Comfort Zone
•
Automatic blower On/Off
•
Sprachflexibilität
•
Guided descaling
•
Guided first-time use
•
Automatic descaling
•
Auto-Off function
•
Storage compartment for iron
•
Storage compartment for mains lead and accessories
•
Safety
CoolDown function
•
Auto-Off function
•
Technical data
Dimensions (width) in in. (mm)
18 5/8 (470)
Dimensions (height) in in.(mm)
38 1/4 (970)
Dimensions (depth) in in.(mm)
58 3/8 (1,480)
Dimensions (width), folded up in in.(mm)
18 5/8 (470)
Dimensions (height), folded up in in.(mm)
50 1/2 (1,280)
Dimensions (depth), folded up in in.(mm)
14 5/8 (370)
Iron surface area in mm² and in²
1200 x 400
Standard accessories
Non-stick soleplate
•
Steamer
•
Premium ironing table cover
•
Steam hose holder
•
Main connection wire holder
•
Test strips for determining water hardness
•
Descaling tablets

|
Our Price: $3,199.00 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 5-7 business days.
Condition: New In Box
|
Features
Miele brings the rotary iron into your home. The wide width roller allows you to press everything from shirts and pants to bed linens and tablecloths. The rotary iron has wheels for easy transportation and folds away for easy storage.
Important Choice! Miele B990 Dry Press only comes in 120V, If you need 220V please select Miele HM16-80 33" Wide Rotary Steam Ironing Press with Continuous Feed and 220V,
Miele B990 is 120V Iron, Heated Ironing Shoe Plate, 95-340°F Variable Temperature, 5 Speed Foot Control Continuous Feed, Folds Up On Casters for Storage.
NEW: AllBrands ships only by common carrier truck. Free Shipping in the Continental USA. Cannot ship to the following states, Arizona, California, Florida and Nevada.
Fastest continuous pressing of flat fabrics up to 34" wide, or 68" folded tablecloths, napkins, drapery, curtains, pants, sheets, towels, pillowcases, bedspreads.
**
B990E B990 is a dry press, if you are considering a Steam Ironing Press please see the Miele HM 16-80
**
The Miele B990/B990E is a dry press, if you want the Miele Steam Ironing Press please order the 220V HM 16-80
**
The previous Miele B890 and B990E is replaced by the NEW Miele B990 on this page. B990 also Replaces earlier models B865, B863, and B890
Redesigned new control panel, temperature selection with added fabric indicator, improved foot control pedal, roller cover "waves" for better feeding, stainless steel accents
Sit and iron in comfort with the Miele rotary iron. This easy-to-use appliance has a wide roller that allows you to press everything from shirts and pants to bed linens and tablecloths, all with a crisp, professional finish. The electronically controlled roller speed can be adjusted to suit the type of laundry being pressed, and your own individual working speed. It is operated through the use of a foot pedal, allowing you to sit while you iron.
Professional Results
Sit and iron in comfort with the Miele rotary iron. Its versatile operation will enable you to give all your ironing a smart and professional finish.
While the rotary iron has design features comparable to much larger, industrial machines, it has specifically been designed for home use. Thanks to its clever fold-away mechanism and wheels, it can be stored in many places.
34" Wide-Width Roller
The wide roller width allows you to press everything from shirts and pants to bed linens and tablecloths. This unique product gently presses delicate lace or puts razor-sharp creases into pants.
Open-End Roller
The open end of the roller is particularly useful for ironing awkwardly shaped items such as shirts and blouses which can be fitted over the open end without being folded. The open end also allows for easy ironing of very wide items such as sheets and tablecloths.
Easy Folding
Finished work is automatically deposited on the laundry shelf beneath the roller in even, soft folds. The ample space between the shelf and the roller allows for large items to be pressed.
The Miele rotary iron has maneuverable rollers for quick and effortless transportation, and folds away neatly for easy storage.
Comfortable Ironing with Extra Leg Room
The Miele rotary iron is very easy to use. By gently pressing the wide foot control bar, the heater plate contacts the roller which begins to rotate. Your hands are free to guide the laundry smoothly and accurately. The roller can be rotated by hand for ease when feeding in laundry.
Finger Guard
The wide space between the hotplate and the roller makes it very easy to feed in the items being ironed. An automatic finger guard device is a special safety feature. If, during the ironing process, your fingers come too close to the hotplate, a safety switch will stop the roller rotation and lift the heater plate off the roller.
Variable Roller Speed
The roller speed can be adjusted to suit the type of laundry being processed and the individual's working speed.
Transportation Wheels for Easy Maneuverability and Storage
The four rollers allow the rotary iron to be easily moved wherever you need to do your ironing. When folded away, the rotary iron requires minimal floor space; in fact, only a scant 2.4 sq.ft of space is required.
Do you aspire to set the most elegant table, with perfect napkins and a wrinkle-free tablecloth? Do you demand a high personal image reflected in smart appearance of your business and casual wardrobe?
If so, Miele invites you to sit and iron in comfort with the unique rotary iron.
This easy-to-use appliance has a wide roller that allows you to press virtually everything from blouses and pants to bed linens and tablecloths, all with a crisp and professional finish.
While the rotary iron has design features comparable to much larger, industrial machines, it has specifically been designed for home use and can be plugged into any 120-volt outlet.
Miele B990E White Rotary Iron - B990E. Professional Results, Wide Width Roller, Open End Design, Swing Out Bar For Hanging Laundry, Foot Pedal Operated, Three Temperature Settings, Finger Guard, Emergency Release Button, Aluminum Feeder Board, Variable Roller Speed, Fold Away Design, Transportation Wheels, White Finish.
Since 1899, Miele has been dedicated to producing state-of-the-art home appliances, and we support your passion for a crisp, professional finish on your linens with our rotary irons. Its versatile operation will enable you to give all your laundry a smart finish. While the rotary iron has design features comparable to much larger, industrial machines, it has specifically been designed for home use and can be plugged into any 120-volt outlet, adding that crowning touch to your family’s laundry.
- Miele is a German manufacturer of high quality commercial equipment
- Miele is able to produce high-quality standards on its products by manufacturing all of its products on its own in nine factories in Germany
- Wide width roller allows you to press everything from shirts and pants to bed linens and tablecloths
- Unique design gently presses delicate lace or puts razor sharp creases into pants
- Large space between the roller and hot plate makes feeding in clothing easy and the open end accommodates larger, awkward items
- Cloth-covered roller rotates at a variety of speeds and is operated by a foot pedal, allowing you to sit while you iron
- Thanks to its clever fold-away mechanism and wheels, it can be accommodated in even the smallest room requiring less than 1/4 of a square meter of storage space, when not in use
- 34 in. wide heater plate is suitable for coping with large amounts of laundry
- Roller speed can be adjusted to suit the type of laundry being processed, and also to suit individual operator working speeds
- The free end of the roller is particularly useful for ironing awkward items such as skirts, blouses, nightshirts etc. as they can be fitted over the free end without having to be folded
- The roller can be rotated by hand for ease when feeding in laundry
- All important controls for ironing are conveniently situated on the control panel on the right hand side for easy operation
- As a special safety feature, an automatic finger guard device
- If, during the ironing process, your fingers come too to the heater plate, a safety switch will stop the roller rotation and lift the heater plate of the roller
- Features comparable to much larger, industrial machines, it has specifically been designed for domestic use
- Built-in wheels for easy transportation and folds away for easy storage
- Swing out bar for hanging laundry
Do you remember the Original Mangle press from the 50's?
Original Mangle Press by Ironrite Ironer Co. of Detroit, Mi.
Download Manuals:
(For further technical information please click here)
Operating Manual
Quick Guide how to use the Rotary Iron
Click Here for Miele.com Manufacturer's Specification Page on B990E
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Foot pedal operated
- Aluminum feeder board
- Height 37"
- Dimensions Open: 39-3/8" Wide x 37" High x 16-3/8" Deep
- Dimensions Closed: 19-5/8" Wide x 41-3/4" High x 16-3/8" Deep
- Weighs approximately 84 lbs
- Color - White
- 15 Amps, 120 Volts
Performance specifications:
Roller diameter: 16 cm
Roller length: 83 cm
Ironing throughput:15 kg/h according to DIN 11902 at 20% initial residual moisture
Control system
Infinitely variable temperature control
5 roller speed settings
Features
Polyester needle felt roller cover
Water reservoir for steam ironing
Treadle switch controls
Chrome-plated airing bar
Heating
Electric
Design
Return feed operation
Aluminium trough
Folding frame for ease of storage
H x W x D: 96 x 98 x 38 cm
H x W x D when folded: 105 x 50 x 38 cm
Safety feature
- Foot pedal operated
- Aluminum feeder board
- Height 37"
- Dimensions Open: 39-3/8" Wide x 37" High x 16-3/8" Deep
- Dimensions Closed: 19-5/8" Wide x 41-3/4" High x 16-3/8" Deep
- Weighs approximately 84 lbs
- Color - White
- 15 Amps Plug Rating, 120 Volts
- Shipped by FedEX Freight
Performance specifications:
- Roller diameter: 16 cm
- Roller length: 83 cm
- Ironing throughput:15 kg/h according to DIN 11902 at 20% initial residual moisture
Control system:
- Infinitely variable temperature control
- 5 roller speed settings
Features:
- Polyester needle felt roller cover
- Treadle switch controls
- Chrome-plated airing bar
Heating:
- Electric
Design
- Return feed operation
- Aluminium trough
- Folding frame for ease of storage
- H x W x D: 96 x 98 x 38 cm
- H x W x D when folded: 105 x 50 x 38 cm
Safety feature:
- Patented finger guard
- Manual trough release in event of power failure
- Temperature limiter
Test certificates:
- VDE / CCA
- EMV-CE
Please review our Freight LTL Shipping Policies Ships FedEx Ground Freight.
* For delivery please specify in the Above Option: "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if their is not a loading dock, or fork lift available for delivery.
*

32430: Miele HM1680 Rotary Steam Ironing Press Continuous Feed 32.5"W, 220V |
Our Price: $3,499.00 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
Includes 220-240V 60Hz Iron 32.5" Wide, 15Kg Ironing Output Per Hour, Variable Temperature Control 45-185°C or 113-365°F, 5 Speed Foot Pedal Continuous Feed, 32.5" Wide, 220-240V 50-60Hz, HD 3 Wire Safety Power Cord, Made in GERMANY.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
Miele brings the rotary iron into your home. The wide width roller allows you to press everything from shirts and pants to bed linens and tablecloths. The rotary iron has wheels for easy transportation and folds away for easy storage.
The Miele Professional HM 16-80 rotary ironer combines high throughput and ease of use for a crisp, professional finish. A wide roller allows you to press everything from shirts and pants to bed linens and
tablecloths, all with brilliant results.
Various speeds can be set electronically to best suit the type of laundry being pressed. This ironer also offers steam heat and can be conveniently operated through the use of a foot pedal, allowing you to
sit while you iron. In addition, the ironer has maneuverable rollers for quick and effortless transportation and folds away neatly for easy storage. Perfect for homes, B&B’s, small inns, restaurants and cafés.
Introducing the Miele HM 16-80 Rotary Steam Press
(Editor's note: The B990, and the B990E that it replaces, are both dry press models otherwise identical to this one. If you want a dry press, feel free to take a look at the Miele B990 instead.)
Do you demand a high personal image, reflected in the smart, sharp appearance of your business and casual wardrobe? Are you someone who aspires for a perfect, pressed look to your dining area and garments? Do you want to set the perfect table, with the most elegant arrangement, perfect napkins, and a wrinkle-free tablecloth?
If so, Miele has the solution.
Treat yourself to professional results and ironing in luxury with the Miele HM 16-80 rotary iron. This easy-to-use appliance utilizes a wide press roller, allowing you to press everything from shirts and pants to bed linens and tablecloths—all with a crisp, professional finish. The electronically-controlled roller speed can be adjusted to suit the type of laundry being pressed, as well as your own individual working speed. This function is easily operated through the use of a foot pedal, allowing you to sit and relax while you iron.
Miele is a German manufacturer of high quality commercial equipment, and is able to enforce the highest standards on its products by manufacturing all of its products in its nine privately-owned factories.
The Miele B990 Rotary Press Instruction Manual
(Recall that the B990 and HM 16-80 are identical except for steam.)
Operating Instructions Manual for Rotary Ironer HM 16-80
Sit and iron in comfort with the Miele rotary iron. Its versatile operation will enable you to give all your ironing a smart and professional finish. While the rotary iron has design features comparable to much larger, industrial machines, it has specifically been designed for home use. Thanks to its clever fold-away mechanism and wheels, it can be stored in many places.
Wide-Width Roller
The wide roller was designed for versatility and easy of ironing. The expanded width allows greater control over efficiency and speed, allowing you to press everything from shirts and pants to bed linens and tablecloths. This unique product gently presses delicate lace or puts razor-sharp creases into pants.
Open-End Roller Design
The open end of the roller is particularly useful for ironing awkwardly shaped items such as shirts and blouses, which can be fitted over the open end without having to be being folded. The open end also allows for easy ironing of very wide items, such as sheets and tablecloths.
Swing out bar for hanging laundry
A simple yet all too absent function of iron presses, the swing out bar is designed to speed up your ironing, allowing for quick and easy manipulation of your clothes. Furthermore, it collapses down with the rest of the machine for easy storage.
Easy Folding
Finished work is automatically deposited on the laundry shelf beneath the roller in even, soft folds. The ample space between the shelf and the roller allows for large items to be pressed.
Comfortable Ironing with Extra Leg Room
The Miele rotary iron is very easy to use. By gently pressing the wide foot control bar, the heater plate contacts the roller which begins to rotate. Your hands are free to guide the laundry smoothly and accurately. The roller can be rotated by hand for ease when feeding in laundry.
Foot Pedal Operation
Easy control of the device comes from the touch-sensitive foot pedal, a large bar built across the bottom of the HM 16-80 Rotary Iron for convenient access.
Three Temperature Settings
The temperature range is marked by dots and fabric controls on the ring around the temperature selector. These correspond with the international fabric care symbols for ironing. One dot is for the minimum temperature setting which is perfect for synthetics; two dots for mid-range temperature, ideal for woolens and silks; and, three dots for the highest setting... perfect for linens and cottons.
A glimpse of the machine in operation.
Finger Guard
The wide space between the hotplate and the roller makes it very easy to feed in the items being ironed. An automatic finger guard device is a special safety feature. If, during the ironing process, your fingers come too close to the hotplate, a safety switch will stop the roller rotation and lift the heater plate off the roller.
Emergency Release Button
This special safety function kicks if your fingers come too close to the heater plate. This automatically stops the roller rotation and lifts the heater plate off of the roller.
Variable Roller Speed
The roller speed can be adjusted to suit the type of laundry being processed and the individual's working speed.
Fold Away Design and Transportation Wheels
The four rollers allow the rotary iron to be easily moved wherever you need to do your ironing. When folded away, the rotary iron requires minimal floor space; in fact, only a scant 2.4 sq.ft of space is required.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
General:
Dimensions (Open): 39-3/8" Wide x 37" High x 16-3/8" Deep
Dimensions (Closed): 19-5/8" Wide x 41-3/4" High x 16-3/8" Deep
Weight: Approximately 84 lbs
Color: White
Power: 15 Amps Plug Rating, 120 Volts
Shipping: FedEX Freight
Performance specifications:
Roller diameter: 16 cm
Roller length: 83 cm
Ironing throughput: 15 kg/h according to DIN 11902 at 20% initial residual moisture
Control system: Infinitely variable temperature control
5 roller speed settings
Heating: Electric
Design: Return feed operation
H x W x D (when unfolded): 96 x 98 x 38 cm
H x W x D (when folded): 105 x 50 x 38 cm
Features:
- Polyester needle felt roller cover
- Treadle switch controls
- Chrome-plated airing bar
- Aluminium trough
- Folding frame for ease of storage
Safety features:
-
Patented finger guard
-
Manual trough release in event of power failure
-
Temperature limiter
Test certificates:
VDE / CCA
EMV-CE
Do you remember the Original Mangle press from the 50's? Reliable Verve (same as Singer Pfaff 580) Rotary Steam Press now with Steam, has adopted the same exclusive and original features of open on both ends of roller and bottom instead of top ironing shoe placement as Ironrite had before they were discontinued.
Original Mangle Press by Ironrite Ironer Co. of Detroit, Mi.
Please review our Freight LTL Shipping Policies
Ships FedEx Ground Freight.
* For delivery please specify in the Above Option: "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if their is not a loading dock, or fork lift available for delivery.
*

6774: Reliable 500VB Heated Vacuum & Up Air Ironing Board Press Table 49x16" |
Our Price: $599.00 Prices are subject to change, and only current prices will be honored.
Availability: ON BACKORDER
Condition: New In Box
|
Features
For USA & Canada Only! Perfect for Home or Cleaner Business
- Iron and Boiler not included (see below to purchase complete system)
Professional features for professional results
The c81 is equipped with both vacuum and up-air functions. While vacuum is great for ensuring a clean-crisp finish to your garments, the up-air feature eliminates impressions, common on delicate fabrics like velvet, corduroy and other napped fabrics.
All metal construction
Like all Reliable Steamer products, the c81 is built to last. It is made entirely of metal in order to ensure stability and sturdiness even for heavy-duty professional work.
Larger 49” x 16” pressing surface
You are busy, and you want to get the ironing done as fast as you can. The large working surface of the c81 reduces the amount of time you spend ironing by putting more of the fabric in front of you.
Built in heating element
Just like our professional series of vacuum tables, the c81 is equipped with a built in heating element to keep the inside of the table nice and dry, and rust free.
Convenience and performance
The c81 conveniently folds up so you can place it out of the way when it is not being used. When you are ready iron, just turn the switch on and you are ready to go.
Quick-dry pad + cover set
Our "Quick-Dry" textured polyester pad & cover set allows maximum air to flow through so your garments will dry quickly. The smooth surface allows your garments to move around with ease.
Vacuum & Up Air Functions
Pressing on a regular ironing board eventually leads to a damp ironing surface, making it impossible to get a clean, crisp finish for your garments. The 500VB with vacuum and up-air provides the user with the same tools that professionals count on.
The Right Tool For The Job
The secret to great finishing is to keep the ironing table dry by removing the steam from the fabric. Use vacuum for pressing a shirt or putting in a crease, while up-air (blowing) is great for delicates, removing the risk of leaving an impression or crushing the nap.
Product Brochure - PDF
Reliable Warranty Information (.PDF)
Extended US Warranty: 10 years on parts
Non-US Warranty: 30 days parts and labor.
Specifications
Technical Specifications
Model: 500VB
Electrical: 110V
Motor Amperage: 0.8
Motor Speed: 3200 RPM
Fan Size: 6” diameter x 2” high
Pedal: Left or right hand use
Heated Pressing Surface: Standard
Power Consumption: 7 amps
Height Adjustment: 30.5” – 38.5”
Pressing Dimensions: 16” x 48.5”
Folded Dimensions: 56” x 17.5” x 7”
Shipping Dimensions: 60” x 19” x 9”
Net Weight: 37 lb – 16.8 kg
Shipping Weight: 42 lb – 19 kg
Country Of Origin: Italy
Electrical Approval: cETLus
Warranty: Limited 1 year

Reliable 500VB Heated Vacuum Ironing Board Pressing Table Refurb |
Our Price: $379.00 Prices are subject to change, and only current prices will be honored.
Availability: ON BACKORDER
Condition: RB Refurbished
|
Features
Includes Foot Pedal Down Air Vacuum, Up Air Blowing Board, 110 Volts, 7 Amps, Iron Basket, Fabric Tray, Made in ITALY
For USA & Canada Only! Perfect for Home or Cleaner Business
- Iron and Boiler not included (see below to purchase complete system)
Professional features for professional results
The c81 is equipped with both vacuum and up-air functions. While vacuum is great for ensuring a clean-crisp finish to your garments, the up-air feature eliminates impressions, common on delicate fabrics like velvet, corduroy and other napped fabrics.
All metal construction
Like all Reliable Steamer products, the c81 is built to last. It is made entirely of metal in order to ensure stability and sturdiness even for heavy-duty professional work.
Larger 49” x 16” pressing surface
You are busy, and you want to get the ironing done as fast as you can. The large working surface of the c81 reduces the amount of time you spend ironing by putting more of the fabric in front of you.
Built in heating element
Just like our professional series of vacuum tables, the c81 is equipped with a built in heating element to keep the inside of the table nice and dry, and rust free.
Convenience and performance
The c81 conveniently folds up so you can place it out of the way when it is not being used. When you are ready iron, just turn the switch on and you are ready to go.
Quick-dry pad + cover set
Our "Quick-Dry" textured polyester pad & cover set allows maximum air to flow through so your garments will dry quickly. The smooth surface allows your garments to move around with ease.
Product Brochure - PDF
Reliable Warranty Information (.PDF)
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Technical Specifications
- Model: c81
- Electrical: 110V
- Heated pressing surface: Standard
- Functions: Down-Air Vacuum plus Up-Air Blowing
- Power consumption: 7 amps
- Pressing dimensions: 48.5in x 16in (123 mm x 42 mm)
- Pedal Left or right hand use
- Country of Origin: Italy

26380: Reliable 6600VB Heated & Vacuum Ironing Board Pressing Table 52X25” (626HA) |
Our Price: $3,499.00 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 3-4 business days.
Condition: New In Box
|
Features
PERFORMANCE AND VALUE
The new 6600VB is the perfect combination of great performance and great value. It’s the professional’s choice for pressing all types of garments, from shirts, to pants, to dresses, to jackets.
CRISP AND CLEAN FINISH
Pressing on a regular ironing board eventually leads to a damp ironing surface, making it impossible to get a clean, crisp finish for your garments. The 6600VB with powerful 0.6 H.P. vacuum motor is the model that more professionals count on.
Features:
- 52 in. x 25 in. pressing area
- One-piece cover/pad set
- Exhaust chimney
- Fast start up motor to save time
- Exhaust chimney for air release
- Adjustable heating element- the adjustable thermostat keeps the inside of the 6600VB dry and rust free.
- Iron pad and cord support included- standard on the 6600VB is an iron rest with a high temperature silicone iron pad and an iron cord support.
- Save time-the 6600VB is equipped with the industry's strongest (for fast drying time) and fastest (no waiting for the motor to rev up) 0.8 h.p. vacuum motor.
- Heated sleeve and utility buck- the heated sleeve buck and contoured utility buck adds great versatility to the 6600VB, allowing a wide range of uses.
Please review our Freight LTL shipping Policies
Reliable Warranty Information (.PDF)
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Electrical: 110V
- Horsepower: 0.6 hp
- Heated pressing surface: Standard
- Functions: Vacuum only
- Pressing dimensions: 52" x 25"
- Iron rest: Standard
- Cover/pad set: Integrated one-piece
- Swing arm & bucks: #100628H. #100625H
- Net weight: 221 lb – 100 kg
- Shipping weight: 256 lb – 116 kg
- Product dimensions: 62" x 31" x 70.75"
- Shipping dimensions: 63" x 32" x 44"
- Country of origin: Italy
- Warranty: Limited 1 year

39633: Reliable 7200VB Commercial Vacuum & Up-Air Heated Ironing Board Pressing Table |
Our Price: $6,999.00 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 3-4 business days.
Condition: New In Box
|
Features
- Fast start up motor to save time
- Height adjustable
- Vacuum & up-air volume control
- One-piece cover and pad set
- Ergonomic curved swing arm
- Adjustable 2-stage foot pedal
- All surfaces are heated
VACUUM & UP AIR FUNCTIONS
Pressing on a regular ironing board eventually leads to a damp ironing surface, making it impossible to get a clean, crisp finish for your garments. The 724HAB with vacuum and up-air provides the tools that professionals count on.
CRISP AND CLEAN FINISH
The secret to great finishing is to keep the ironing table dry by removing the steam from the fabric. Use vacuum for pressing a shirt or putting in a crease, while up-air (blowing) is great for delicates, removing the risk of leaving an impression
or crushing the nap.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Electrical 110V
- Horsepower 0.8 hp
- Heated pressing surface Standard
- Functions Vacuum and up-air
- Pressing dimensions 47" x 13.8"
- Pedal 2–pedal system
- Iron rest Standard
- Cover/pad set Integrated one-piece
- Heated sleeve buck #100628H
- Net weight 242 lb – 110 kg
- Shipping weight 292 lb – 133 kg
- Product dimensions 64" x 25" x 64"
- Shipping dimensions 69" x 28" x 44"
- Country of origin Italy
- Warranty Limited 1 year

39632: Reliable 7600VB Vacuum & Up-Air Commercial Heated Ironing Board Pressing Table |
Our Price: $7,799.00 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 3-4 business days.
Condition: New In Box
|
Features
- Height adjustable
- Vacuum & up-air volume control
- One-piece cover and pad set
- Heavy-duty metal swing arms
- Adjustable 2-stage foot pedal
- All surfaces are heated
VACUUM & UP AIR FUNCTIONS
Pressing on a regular ironing board eventually leads to a damp ironing surface, making it impossible to get a clean, crisp finish for your garments. The 726HAB with vacuum and up-air provides the tools that professionals count on.
CRISP AND CLEAN FINISH
The secret to great finishing is to keep the ironing table dry by removing the steam from the fabric. Use vacuum for pressing a shirt or putting in a crease, while up-air (blowing) is great for delicates, removing the risk of leaving an impression
or crushing the nap.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Electrical 110V
- Horsepower 0.8 hp
- Heated pressing surface Standard
- Functions Vacuum & up-air
- Pressing dimensions 52" x 26"
- Iron rest Standard
- Cover/pad set Integrated one-piece
- Swing arms & bucks #100628H, #100625H
- Net weight 292 lb – 133 kg
- Shipping weight 340 lb – 154 kg
- Product dimensions 59" x 33" x 64"
- Shipping dimensions 63" x 32" x 44"
- Country of origin Italy
- Warranty Limited 1 year

47371: Hi Steam PND-2500A Heated Vacuum Ironing Board Table 53x16.5" +Sleeve Arm, Hot Iron Rest, Tray |
Our Price: $1,499.99 Prices are subject to change, and only current prices will be honored.
Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box
|
Features
Are looking for a system to handle all your laundry needs? Then the Hi-Steam PND -2500A is for you!
- Professional strength self-contained vacuum
- Heated pressing surface
- Vacuum swing arm and heated sleeve buck
- Ship via UPS (2 boxes)
- Economically priced
- Perfect for use with HI-STEAM mini boilers for a compete, instant pressing department
- Ideal for: tailors, alteration rooms, drop-off stores, clothing stores, valet service, tuxedo and bridal shops
- Also Available -- PND-2500AB Vacuum + Blowing Board -- call for details
This board is intended for Medium Duty Commercial use.
Warranty - 1 year on heating element and motor, 90 Days on all other parts
Non-US Warranty: 30 days parts and labor.
Specifications
-
Model: PND-2500A
-
Electricity: 120V 5 AMPS 600 WATTS
-
Vacuum Area: 42" x 15" x 9"
-
Dimensions: 53" x 16.5"
-
Net Weight: 88 lbs
-
Gross Weight: 102 lbs

95149: Hi Steam ES-2000AR Spotting Board |
Our Price: $3,999.00 Prices are subject to change, and only current prices will be honored.
Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box
|
Features
- Strong, self-contained vacuum for faster drying
- Two cold spotting guns connect to solvent tanks on machine
- Stainless steel construction for strength and durability
- Steam/air assembly
- Standard sleeve spotting arm
- Ecological suction hood captures stray vapors
- Solvent bottle rack and light built into hood
- ETL Listed
- All Sales Final
Maintenance and Operating Manual
Non-US Warranty: 30 days parts and labor.
Specifications
Attached please find the ES-2000AR Spotting Machine Manual.
-
Model: ES-2000AR
-
Voltage: 120V 4.2 AMPS
-
Dimensions: 46" X21" X 70"
Boiler and Air Compressor Required
Electricity: 120V 4.2 AMPS
Machine Size: 46.5” X 21.5” X 70”
Net Weight 130 LBS
Shipping Weight 160 LBS
Requires Compressed Air

47369: Hi Steam Commercial PND-3000A Heated Vacuum Ironing Board Table System |
Our Price: $1,999.95 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
- Professional strength self-contained vacuum for fast drying
- Vacuum swing arm and inter-changeable buck shapes
- Heated pressing surface and swing buck
- Optional conveyer and iron lifter assembly
- Economically priced
- Perfect for use with Hi-Steam mini boilers for a complete instant pressing department
- Ideal for: tailors, alteration rooms, drop-off stores, clothing stores, valet service, tuxedo and bridal shops
This Board is for Heavy Duty Commercial use.
Non-US Warranty: 30 days parts and labor.
Specifications
Model: PND-3000A
Voltage: 120V 6.5 AMPS
Vacuum Area: 47” x 15.75” x 9.9"
Dimensions: 60.3” x 17.25” 63.0” x 17.25”
Net Weight: 145 lbs
FEATURES:
- Professional strength self-contained vacuum for fast drying
- PND-3000AB also features blowing up-air
- Vacuum swing arm and inter-changeable buck shapes
- Heated pressing surface and swing buck
- Optional conveyer and iron lifter assembly
- Economically priced
- Perfect for use with Hi-Steam mini boilers for a complete instant pressing department
- Ideal for: tailors, alteration rooms, drop-off stores, clothing stores, valet service, tuxedo and bridal shops
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Limited Warranty: 12 months for heating elements (vacuum boards) and motors, and 90 days for all other parts.

|
Our Price: $229.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
- Press can work on size of 5-8" and base diameter is 4.92", the base of the additional plate is 6.10"
- Easy parameter setting.
- Integrated electric control system for simple adjusting and maintenance.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Voltage: 110V/60Hz
Power: 120W
Temperature range: 0 - 240F
Time range: 0-999s
Working area: 12.5cm
Net weight: 26.5LBs
Gross weight: 31LBs
Box size: 51X42X27CM/20''X17''X10
Downloads:
Selecting between Celsius and Fahrenheit in Flat Heat Press (.pdf)
Manual for multi function heat press (.ppt)

|
Our Price: $229.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
The hot plate uses the special ultra fine line-tube technology, it can effectively keep the temperature equilibrating and stabilizing.
Structure is simple, cubage is small and replacing heat pad is convenient.
Entire digital display, Operation is easy and integration rate is high.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Voltage: 110V/60Hz
Power: 380W
Temperature Range: 0-240°F/-18℃-116℃
Time Range: 0-999s
Worktable Size: 15.5cm/6"
Gross Weight: 15kg/33LBs
Net Weight: 13kg/29LBs
Box Size: 51x42x27cm/20"x17"x11"

|
Our Price: $299.99 Prices are subject to change, and only current prices will be honored.
Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box
|
Features
Any graphics software will work as long as it prints on heat transfer paper.
- Accurate top-to-bottom Heat
- Continuous heat around mug
- Auto Reset timer and LCD Readout
- Effective with all types of mug transfers
- Accommodates: 11oz, 13oz, 15oz, 16 oz. and 12oz 4 3/4 Top Diameter Conical Mugs
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications

16930: Ricoma Ikonix HP-1508T Hat Cap Patch Heat Press Machine 420W 400°F Temperature |
Our Price: $369.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
- 4" X 8.5" Heat Platen
- 3.5" X 6" standard lower platen
- Auto Reset Timer
- Easy read temperature gauge
- Optional Interchangeable platens
- Scratch Resistant powder coat finish
- Power: 420W
Note: Any graphics software will work as long as it prints on heat transfer paper.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Voltage:110V/60Hz
- Power:420W
- Temperature range: 0-240C
- Time Range: 0-999 seconds
- Working Area: 3" X 6"
Downloads:
Selecting between Celsius and Fahrenheit in Flat Heat Press (.pdf)
Manual for multi function heat press (.ppt)

How to Adhere Patches to Caps (Embroidery Vs. Heat Press)
This week on Embroidery Hub, Willy shows us how to make patches and how to adhere them to caps using two different methods: embroidery and heat pressing. He’ll also go over each method’s advantages to help you decide which one is best for your custom apparel business

|
Our Price: $369.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
- 15"x15" Heat platen up to 450°F
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications

|
Our Price: $419.00 Prices are subject to change, and only current prices will be honored.
Availability: OUT OF STOCK
Condition: New In Box
|
Features
Any graphics software will work as long as it prints on heat transfer paper. This is the only 16" Heat Press we have that matches the platen on Brother GT541 Garment Printer!
- Rugged and durable for years of trouble-free performance
- Use to transfer onto T-shirts, sweatshirts, mouse pads, license plates, magnetic material, bags, and much more!
- Opens up approximately 70 degrees
- Press items up to 1" thick
- Thermometer for heat platen temperature
- Adjustable thermostat up down
- celcius to farenheit settings
- Heat indicating light
- Silicon gel base board to endure temperature up to 575F without deformation
- No color difference after heat transfer
- Pressure adjustable
- Electronic time control
- Electronic constant temperature control accuracy
- Safe, durable and economical
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications

|
Our Price: $484.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
- Digital control, easy to adjust pressure and reliable performance.
- Five heating mats working, makes for faster printing, saving you time and increasing productivity.
- Suitable for mass production.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Voltage: 220/110V
- Frequency: 50Hz
- Watts: 380W
- Weight: 90lbs
- Max Temperature: 180-200℃
- Heating Time: 2-3 Minutes
- Mug Diameter Range: 2.95"-3.54"
- Max Mug Height: 4.53"
- Working Area: 6"x9"

33330: Ricoma iKonix HP-3838H High Pressure 15x15" Flat Heat Transfer Press Machine |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored.
Availability: OUT OF STOCK
Condition: New In Box
|
Features
The iKonix 15" x 15" Heat Press is perfect for high volume t-shirt transfers. This clamshell Heat Press Machines is best for starters who need a reliable Heat Press Machine. Rugged and durable, the iKonix high pressure heat press provides years of trouble-free performance. It is used for high-quality heat transfer on t-shirts, mouse pads, sweatshirts and plenty more.
- Rugged and durable for years of trouble-free performance
- Use to transfer onto T-shirts, sweatshirts, mouse pads, license plates, magnetic material, bags, and much more!
- Opens up approximately 70 degrees
- Press items up to 1" thick
- Thermometer for heat platen temperature
- Adjustable thermostat
- Heat indicating light
- Silicon gel base board to endure temperature up to 575F without deformation
- No color difference after heat transfer
- Pressure adjustable
- Electronic time control
- Electronic constant temperature control accuracy
- Safe, durable and economical
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications

|
Our Price: $569.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Any graphics software can be used for heat presses as long as it prints on heat transfer paper.
Model #HP-0401 MF / 4 in 1 multi-function heat press: Heat press size is 11.42″X14.96″; cup press can be used on standard 11 ounce cups,the base size is 3.34″X3.81″; plate press can work on size of 8″ and base diameter is 4.92″;The heat part of cap press machine ranges 3.14″X5.51″
- *Heat press size is 11.42" X 14.96"
- Cup press can be used on standard 11 ounce cups
- The base size is 3.34" X 3.81";
- Plate press can work on size of 8" and base diameter is 4.92"
- The heat part of cap press machine ranges 3.14"X5.51"
- Items included Exchangeable Parts: one T-Shirt Press(30*30cm), one Mug Press(11cm),one Plate Press(81mm) and one Baseball Hat Cap Press(8*14cm)
- Shovel Handle Design
- Constructed with steel frame.
- Adjustable timer and audible sound when preset time has been reached
- Power Switch, high current circuit breaker
- Silicon rubber base included
- Timer/alarm starts automatically when the heat press is engaged
- Extra thick heat plate provides even temperature and higher pressure
- Easy to use Swing-away T-Shirt Heat press
- Power on/off indicator switch
With interchangeable parts, the iKonix multi-function heat press is suitable for transfers on plates, caps, mugs and shirts. Constructed with a steel frame, this high pressure heat press is a durable addition to your decorated apparel equipment.
Items included Exchangeable Parts: one T-Shirt Press(30*30cm), one Mug Press(11cm),one Plate Press(81mm) and one Baseball Hat Cap Press(8*14cm)
Shovel Handle Design
Constructed with steel frame.
Adjustable timer and audible sound when preset time has been reached
Power Switch, high current circuit breaker
Press Temp: 0 – 399 C/-18℃ – 209℃ (+/- 2 degree)
Silicon rubber base included
Timer/alarm starts automatically when the heat press is engaged
Extra thick heat plate provides even temperature and higher pressure
Easy to use Swing-away T-Shirt Heat press
Power on/off indicator switch.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
Voltage: 110V/60Hz
-
Power: 1300W
-
Temperature range: 0 – 599F
-
Time range: 0-999s
-
Gross weight: 57 lbs
-
Net weight: 52 lbs
- Box size:56 X 55 X 46CM
- Working area:29X38CM / 11.5″X15″
Downloads:
Selecting between Celsius and Fahrenheit in Flat Heat Press (.pdf)
Manual for multi function heat press (.ppt)

- Shovel handle design
- Constructed with steel frame
- Adjustable timer and audible sound when preset time has been reached
- Power switch, high current circuit breaker
- Silicon rubber base included
- Timer/alarm starts automatically when the heat press is engaged
- Extra thick heat plate provides even temperature and higher pressure
- Power on/off indicator switch
Voltage:110V/60Hz
Power:1300W
Temperature range:0 – 599F/-18℃-315℃
Time range:0-999s
Working area:29X38CM / 11.5″X15″
Gross weight: 40 kg
Box size:56 X 55 X 46CM

90541: HPN CLAM1115 Red 11x15" Digital Heat Transfer Press Clam Shell HTV Machine, Online Only |
Our Price: $449.99 Prices are subject to change, and only current prices will be honored.
Availability: Advance Orders Only. Please review the product description for complete details.
|
Features
"The press you sell is much better for pressing vinyl onto garments... which gives decorators a combination of consistent heat, time, and especially pressure." Rosemary C.
Engineered by a leading U.S. manufacturer, the HPN 11"x15" Red Series High Pressure Heat Press Machine is a top of the line, commercial grade heat press offered at an affordable price. The powerful clamp mechanism ensures increased leverage and torque with minimal effort. The automatic floating upper heat platen provides complete end-to-end even pressure and heating and is built thicker for better heat retention.
The HPN 11" x 15" Red Series High Pressure Heat Press Machine is unmatched in quality and craftsmanship in its size class. A complete commercial quality, business grade heat press at an unbeatable price.
Excels in all heat press applications including: heat transfer images, heat transfer vinyl, rhinestones, sublimation, screen printed transfers, Direct to Garment prints and much more.
The digital 11" x 15" clam press is an economical heat press that can get any size job done. The digital 11" x 15" clam heat press is easy to operate with it's digital time and temperature readout and over-the-center pressure adjustment. The upper flotational platen provides a flat, even surface. The digital 11" x 15" clam heat press is ideal for individuals who are just starting out in the industry, as a second heat press for the shop, or as a travel press for special events.
• Ideal for those starting out, as a second press or a travel press
• Digital Time and Temperature
• Easy to operate
• UL/ULC/CE/RoHS Approved
• CE/NRTLCO Approved • Over-the-Center pressure adjustment
• Upper heating element has non-stick coating
• Cast-In Tubular Heating Element spaced every 2" eliminates cold spots
• Opens wide for easy layout and access
• 90 day warranty
Engineered by a leading U.S. manufacturer, the HPN 11"x15" Red Series High Pressure Heat Press Machine is a top of the line, commercial grade heat press offered at an affordable price. The powerful clamp mechanism ensures increased leverage and torque with minimal effort. The automatic floating upper heat platen provides complete end-to-end even pressure and heating and is built thicker for better heat retention.
The HPN 11" x 15" Red Series High Pressure Heat Press Machine is unmatched in quality and craftsmanship in its size class. A complete commercial quality, business grade heat press at an unbeatable price.
Excels in all heat press applications including: heat transfer images, heat transfer vinyl, rhinestones, sublimation, screen printed transfers, Direct to Garment prints and much more.
ALL OF OUR HEAT PRESSES CARRY INDUSTRY LEADING WARRANTIES AND OUR UNCONDITIONAL CUSTOMER SUPPORT!
Specifications:
Heat Press Style: Clamshell
11" x 15" Non-Stick Coated Heat Platen
Gauge Reading: Fahrenheit or Celsius degree measure
Digital Temperature Control
Digital Automatic Timer
Automatic Flotation Feature
Voltage: 110V
Temperature Range: 205° - 430º F
Features:
Rugged and durable for years of trouble-free performance
Opens approximately 50 degrees
Thick items capable(up to 1/2 inch thick)
Full pressure range knob
Micro processor precision heat and temperature gauge
Padded reinforced double bar "Strong handle" for easy high pressure application
Scratch resistant baked-on paint
Adjustable low to high pressure clamp
Full range heating coils for quick heat up
Heat indicating light
Electronic time control indicates completion of heat press cycle
Electronic constant temperature control systems for accuracy of 4 degrees
Complete commercial business grade
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Cast-in tubular heating elements that eliminate cold spots
Platinum RTD heat sensor
Digital time & temperature readout
Non-stick coated upper heat platen
Upper flotational heat platen
90 day warranty
Heat Press Style: Clamshell
11" x 15" Non-Stick Coated Heat Platen
Gauge Reading: Fahrenheit or Celsius degree measure
Digital Temperature Control
Digital Automatic Timer
Automatic Flotation Feature
Voltage: 110V
Temperature Range: 205° - 430º F

6934: Ricoma Ikonix HP-0601MF 6in1 Multi Function Heat Transfer Press Machine 11x15" |
Our Price: $599.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Any graphics software will work as long as it prints on heat transfer paper.
The Ikonix 6-in-1 Multifunction Heat Press is based on a swing-away design and includes 6 attachments to transfer images onto T-shirts, ceramic plates, ceramic tiles, mugs, mouse pads, jigsaw puzzles, caps, fabrics and materials.
- Heat press size is 11" x 15"
- Cup press can be used on standard 11 ounce cups
- The additional one can work on cup of 15 ounces; plate press can work on size of 8" and base diameter is 4.92"
- The base of the additional plate is 6.10"
- The heat part of cap press machine ranges 3.1"4 X 5.51"
- Items included Exchangeable Parts: one T-Shirt Press(30*30cm), one Mug Press(11cm),one Plate Press(81mm) and one Baseball Hat Cap Press(8*14cm)
- Shovel Handle Design
- Constructed with steel frame.
- Adjustable timer and audible sound when preset time has been reached
- Power Switch, high current circuit breaker
- Silicon rubber base included
- Timer/alarm starts automatically when the heat press is engaged
- Extra thick heat plate provides even temperature and higher pressure
- Easy to use Swing-away T-Shirt Heat press
- Power on/off indicator switch.
The Ikonix 6-in-1 Multifunction Heat Press is based on a swing-away design and includes 6 attachments to transfer images onto T-shirts, ceramic plates, ceramic tiles, mugs, mouse pads, jigsaw puzzles, caps, fabrics and materials.
With interchangeable parts, the iKonix multi-function heat press is suitable for transfers on plates, caps, mugs and shirts. Constructed with a steel frame, this high pressure heat press is a durable addition to your decorated apparel equipment.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
Voltage: 110V/60Hz
-
Power: 1300W
-
Amps: 12a
-
Temperature range: 0 – 599F
-
Time range: 0-999s
-
Working area: 15in X 23in
-
Gross weight: 83 lbs
-
Net weight: 79 lbs
-
Box Size: 22"X22"X18"
-
Shipping Weight: 60 lbs
-
Mug Press Attachment: used for 11 ounce mug size
-
Mug Press Attachment: used for 15 ounce mug size
-
Plate Press Attachment: used for plates with base of up to 5" base
-
Plate Press Attachment: used for plates with base of up to 6.1"
-
Cap Press Attachment: 3.15" x 5.5 "
-
Heat Press Style: Swing Away
Downloads:
Selecting between Celsius and Fahrenheit in Flat Heat Press (.pdf)
Manual for multi function heat press (.ppt)

- Shovel handle design
- Constructed with steel frame
- Adjustable timer and audible sound when preset time has been reached
- Power switch, high current circuit breaker
- Silicon rubber base included
- Timer/alarm starts automatically when the heat press is engaged
- Extra thick heat plate provides even temperature and higher pressure
- Power on/off indicator switch

82909: HPN Demo CP912 120V Hot Pink Craft Heat Press, 9x12" Platen, 35Lb, HTV Vinyl |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 3-4 business days.
Condition: Floor Model
|
Features
Technical support provided by Hotronix, The Craft Press is a great home heat press for any entry level business, crafters, or home based entrepreneurs and hobbyists. It’s ideal for a crafting Business. The Craft Press is 9"x12". This makes it the perfect size for pressing your shirts, pillow cases, towels, and much more. Together, the two are light and small enough to be portable for craft shows or to keep your work area clean. The Craft Press is also the perfect press to travel to craft shows, tradeshows, or game day set ups for on the spot personalization.
The Craft Press is a great home heat press for any entry level business or home hobbyist. It’s ideal for a crafting Business. The Craft Press is 9"x12". This makes it the perfect size for pressing your shirts, pillow cases, towels, and much more. Together, the two are light and small enough to be portable for craft shows or to keep your work area clean. The Craft Press is also the perfect press to travel to craft shows, tradeshows, or game day set ups for on the spot personalization. • Platen size is 9"x12" • Press features over the center pressure adjustment • Digital time & temperature read out • 90 Day warranty • UL/ULC/CE/RoHS Approved • CE/NRTLCO Approved
- Great heat press for crafters, hobbyists, and home-based entrepreneurs
- 9" x 12" platen
- Lightweight—only 35 lbs.
- Press features Over-the-Center Pressure Adjustment for even, edge-to-edge heat and pressure
- Digital time and temperature readout
- Non-stick Teflon coated heating platen
- UL/ULC/CE/RoHS Approved
- CE/NRTLCO Approved
- 120V AC/6.5A
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Craft Press Model CP912-120 Operator’s Manual
Specifications:
Copyright © 1995-2023 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks
of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.