Also includes allen driver tools for adjusting driver to machine, instruction book and raised insert for needle plate to prevent hat from moving up and down with the needle.

Provides expanded embroidery area, allowing you to stitch caps virtually ear-to-ear. Total embroidery area is 14" x 2 3/8" (60mm x360mm). Includes14"x 2 3/8" (60mm x360mm) wide cap frame, cap frame driver, and mounting jig.

Embroider popular cap styles quickly and easily with this cap frame attachment.
The embroidery wide area is a generous 360mm wide x up to 60mm high

For Use With: Entrepreneur® Pro PR-1000, Entrepreneur® Pro PR1000e

Brother PR Hoop Compatibility Chart(.PDF)

Specifications
Cap Frame Set User Manual

The Brother PRPCF1 Wide Cap Frame Kit provides an expanded embroidery area, allowing you to stitch caps virtually ear-to-ear. Total embroidery area with the Brother PRPCF1 Wide Cap Frame Kit is 14" x 2 3/8" (60mm x360mm).

How To Set Up the Cap Frame Driver


How to Set Up the Cap Frame
Included Accessories
  • 14" x 2 3/8" (60mm x3 60mm) wide cap frame
  • Cap frame driver
  • Mounting jig
{Q}I have a Brother PR I am hooping hats, and I am trying to center the design closer to the bill of the hat. I had the design sized to 2.00 inches in height. then resized to 1.80 it let me move it down a little but not much. The design just sits a little high on the front of the hat. But the machine will not let me move it down. I have looked for help everywhere and find it. Your help is greatly appreciated. Mitzi M. {A}Mitzi, I do not believe the brother hat hoop will allow you to sew closer to the bill of the hat. Some customers are now using the Durkee hat hoop below* which allows you to sew closer to the bill and higher up on the hat too. Please look at the video. John {A}John, The Durkee hoop will be the best bet for her. When the design is moved closer to the bill allowing for a lower placement of the design, it doesn't allow as much space for the needle threader to activate properly. I have had this issue and try not to move the design too close to the bill. However, the Durkee frames are a saving grace and the videos on their site are great. Hope she resolves her issue. And she will be happier.
I have a Brother PR
I am hooping hats, and I am trying to center the design closer to the bill of the hat. I had the design sized to 2.00 inches in height. then resized to 1.80 it let me move it down a little but not much. The design just sits a little high on the front of the hat. But the machine will not let me move it down.
I have looked for help everywhere and find it.
Your help is greatly appreciated.
Mitzi M.
Mitzi, I do not believe the brother hat hoop will allow you to sew closer to the bill of the hat. Some customers are now using the Durkee hat hoop below* which allows you to sew closer to the bill and higher up on the hat too. Please look at the video. John
John, The Durkee hoop will be the best bet for her. When the design is moved closer to the bill allowing for a lower placement of the design, it doesn't allow as much space for the needle threader to activate properly. I have had this issue and try not to move the design too close to the bill. However, the Durkee frames are a saving grace and the videos on their site are great. Hope she resolves her issue. And she will be happier.