*Requires Software that will Split Designs. Requires Brother PE Design or other software on your computer to split the design in two, before running both sides in your 14x14" hoop. Embroider up to 7x14" then turn around for another 7x14" for a merged 14x14" design. Needs to create a custom hoop in PE Design Next in order for the design to split. This is located in the design page settings. It is called Extra Large embroideries in the instruction manual.
Hoop frame for uses adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. With an embroidery field of 12” x 14”, now you can enjoy even more customization options. Sew 14” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
- 14" x 14" Hooping area
- For use with the Brother PR1000 and Babylock ENT10, BNT10
- Expand your embroidery options! Take your PR600 series machine to the next level with this jumbo hoop. With an embroidery field of 14” x 14”, now you can enjoy even more customization options. Sew 14” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment). Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. ..Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
Click HERE for Fast Frames Instructions
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
George, the Fast Frames 102-012 will work on your Brother PR1000 series. You only have to do a trial layout to make sure the design is centered and that the presser foot and needle do not hit the hoop. You console screen will only recognize Brother hoops, not Fast Frames, Hoop Tech, Quick Snap Purse hoops, Durkee, or Never Mark. But that does not affect your machines ability to use these non-Brother hoops. Hope this helps. Thanks. John Douthat, Owner and Tech.
Fast Frames 102-032 Deep Bag Hoop 14x7" for Brother PR1000, PR1050X, Babylock BNT10