This JUKI LG-158 is a 30" Long Arm Sewing Machine with Compound Feed (Walking Foot), Jumbo Bobbins and a 1/2" Needle Gauge.
The machine is complete with table top, heavy duty stand and new 110 Volt SERVO Motor.
Most widely used for sewing larger panels of materials such as vinyl signs, awnings, tarps, insulation covers, and other large items.
This is a MADE IN JAPAN machine.
- US Warranty 90 Days labor on defects in materials and workmanship.
- Non-US Warranty: 30 days parts and labor
MAX SEWING SPEED: 1,500 SPM
MAX FOOT LIFT: 22mm (Almost a Full Inch)
Max. sewing speed 1,500sti/min
Max. stitch length 10mm
Presser foot By pedal: 21.5mm
Alternating vertical movement 6～19mm
Distance from needle to machine arm 750mm
Needle DD×1 (#25)
Thread #20～#5, B69～B138, Nm=40/3～20/3
Hi, our Juki tech says #277 thread max size on Juki LG158, unless you are willing to adjust needle clearances in the bobbin area to accommodate the extra thread thickness of sizes over #277. Calvin from Juki in Miami said tex 310 should also work for the Juki 158. Joe