April 17, 2021

Durkee Embroidery Hoops and EZ Frames for Single Needle Brother, Multi Needle, PR, Babylock, Happy, and Janome Multi Needle Machines, Happy 701 1201, Janome MB4 MB7, Melco, Multi Needle Machines

Xs_38167_2641
Durkee Embroidery was founded with the concept of providing lower cost, higher quality products for the embroidery industry. Durkee utilized their extensive manufacturing experience to create the most widely distributed tubular hoop line in the world today. In an effort to effectively serve the embroidery community, we develop products based on customer feedback. We invite your comments and suggestions.

The top 2 reasons you need a Durkee Hoop to improve your embroidery results: 1. Allows you to effortlessly hoop "difficult items". 2. Easy to use: Simply apply sticky backing to the underside of the frame to hold your project in place

Durkee Embroidery Guarantee: It is our pleasure to detail the guarantee provided for our tubular hoop line. Durkee guarantees the plastic component of the round hoops for a lifetime against manufacturer's defects. They will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices. They also offer a total satisfaction guarantee.


The Janome MB4 and MB7 multi needle machines do have adjustable arms like the Brother PR. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100. Durkee

Durkee Durkee Multi-Needle Power Pack for BL/BR 6 & 10 Needle Machines Includes Cap Frame and 7 Piece EZ Frame Set

Durkee Durkee Multi-Needle Power Pack for BL/BR 6 & 10 Needle Machines Includes Cap Frame and 7 Piece EZ Frame Set

Durkee Multi-Needle Power Pack for BL/BR 6 & 10 Needle Machines Includes Cap Frame and 7 Piece EZ Frame Set

Our Price: $490.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Combine two (2) Best Selling products from Durkee for multi-needle machines and you get a true Power Pack! This package includes Durkee's World Famous Cap Frame allowing for larger designs and is much easier to use than "cylinder" type devices. Add Durkee's Seven (7) piece EZ Frame set and embroidery just got easier and more fun!





Non-US Warranty: 30 days parts and labor.

Durkee Multi-Needle Master Pack for Babylock Alliance and Brother PRS100: Includes Cap Frame and 7 Piece EZ Frame Set

Durkee Multi-Needle Master Pack for Babylock Alliance and Brother PRS100: Includes Cap Frame and 7 Piece EZ Frame Set

Durkee Multi-Needle Master Pack for Babylock Alliance and Brother PRS100: Includes Cap Frame and 7 Piece EZ Frame Set

Our Price: $490.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Combine two (2) Best Selling products from Durkee for multi-needle machines and you get a true Power Pack! This package includes Durkee's World Famous Cap Frame allowing for larger designs and is much easier to use than "cylinder" type devices. Add Durkee's Seven (7) piece EZ Frame set and embroidery just got easier and more fun!





Non-US Warranty: 30 days parts and labor.

Brother SASTURDY12 X14" DURKEE Split Design Hoop Frame for Six & Ten Needle PR600 PR620 PR650 PR655 PR670 PR1000 PR1050 PR1050X, requires PEDesign 11

Brother SASTURDY12, X14" DURKEE Split Design Hoop Frame for Six & Ten Needle PR650 PR655 PR670 PR1000 PR1050 PR1050X requires PEDesign 11 Software

98476: Brother SASTURDY12 X14" DURKEE Split Design Hoop Frame for Six & Ten Needle PR650 PR655 PR670 PR1000 PR1050 PR1050X requires PEDesign 11 Software

Our Price: $229.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features



  • Must be used with PE Design 11
  • Durkee SturdiFrame 12" x 14" with Instructions
  • For use with PR600 and later models
Non-US Warranty: 30 days parts and labor.

Brother SASTURDY8X14 8" x 14" DURKEE Split Design Hoop Frame for PRS100 Persona and Babylock Alliance BNAL requires PEDesign 11 Split Design Software

Brother SASTURDY8X14, 8" x 14" DURKEE Split Design Hoop Frame for PRS100 Persona and Babylock Alliance BNAL requires PEDesign 11 Split Design Software

98477: Brother SASTURDY8X14 8" x 14" DURKEE Split Design Hoop Frame for PRS100 Persona and Babylock Alliance BNAL requires PEDesign 11 Split Design Software

Our Price: $219.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features





  • Must be used with Brother PE Design 11 Software
  • Durkee SturdiFrame 8" x 14" with Instructions
  • For use with Brother PRS100 Persona or Babylock Alliance BNAL
Non-US Warranty: 30 days parts and labor.

Brother XH1466001 Babylock EF99 Extra Embroidery Hoop 10-5/8 x 16 Inch that comes Stardard with Luminaire XP1, XP2, Solaris BLSA

Brother XH1466001, Embroidery Hoop 10-5/8 x 16 Inch for Luminaire XP1, XP2, Babylock Solaris

99992: Brother XH1466001 Extra Embroidery Hoop 10-5/8 x 16 Inch that comes Stardard with Luminaire XP1, XP2, Babylock Solaris

Our Price: $99.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Make your projects larger than life with the new Brother Luminaire XP2 10 5/8" X 16" Embroidery Frame, the largest that Brother currently offers. This extra-large Brother Luminaire Embroidery Frame has efficient rubber plates on both sides of the inner frame to hold fabric securely.

Non-US Warranty: 30 days parts and labor.

Specifications

Huge 16" x 11" (41cm x 27cm) Brother embroidery hoop.

Part Number: XH1466001

Brother PEDESIGN 11 Full Version Software Package +Durkee STURDYPED8 X14" Sturdi Frame Split Design Hoop for PRS100 Persona and Babylock Alliance BNAL

Brother PEDESIGN 11, Full Version Software Package +Durkee STURDYPED8X14", Sturdi Frame Split Design Hoop for PRS100 Persona and Babylock Alliance BNAL

8479: Brother SASTURDY8X14" Durkee Split Design Sturdi Frame Hoop +required PEDESIGN11 Full Version Software for PRS100 Persona and Babylock Alliance BNAL

Our Price: $999.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Special Facts about PE-DESIGN 11
PE-DESIGN 11 is a feature-packed software that offers you so much for your sewing, embroidery, quilting and crafting projects. As a matter of fact, if you have former models of the ScanNCut Home and Hobby Cutting Machines, PE-DESIGN 11 will help you convert the PHX embroidery file format from the Luminaire to FCM for ScanNCut use. PE-DESIGN 11 also offers Wireless LAN Connectivity, exclusive to the Luminaire Innov-ís XP1, which allows a person to transfer designs wirelessly back and forth from your PC to their machine!





PE-DESIGN 11
Packed with powerful and time-saving features, this software is for both the casual hobbyist or the home-based business entrepreneur. Imagine the ability to create your own fonts, stitches and designs once to use many times on hats, pillows, shirts and more. Help reduce the amount of time spent changing threads by using the Intelligent Color Sort feature that will stitch the areas that share one color in groups. Best yet, if you own the Luminaire XP1, enjoy Wireless LAN Connectivity to transfer your embroidery designs and sewing stitches wirelessly.

We have packed this software with so many time-saving features that will help you create more in less time. Imagine the capability to create your own fonts, stitches and designs - just once - to use many times on hats, pillows, shirts, and other fabrics. Reduce the amount of time spent changing threads by using the Intelligent Color Sort feature, which will stitch those areas that share one color in groups.


Brother/Durkee SturdiFrame
  • Must be used with PE Design 11
  • Durkee SturdiFrame 8" x 14" with Instructions
  • For use with PRS100
  • Maximize your embroidery space
Non-US Warranty: 30 days parts and labor.

Specifications

How to Split Designs in PE Design 11 Digitizing Software:


How to Use the Sturdi Frame After it is Digitized in PE Design 11:

Brother PEDESIGN11 Full Version Software +Durkee STURDYPED12x14" SturdiFrame Split Design Hoop for PR600 PR620 PR650 PR655 PR670 PR1000 PR1050 PR1055

Brother PEDESIGN11, Full Version Software +Durkee STURDYPED12x14" SturdiFrame Split Design Hoop for PR600 PR620 PR650 PR655 PR670 PR1000 PR1050 PR1055

98478: Brother STURDYPED12 x14" Durkee SturdiFrame Split Design Hoop +required PEDESIGN11 Full Version Software for PR650 PR655 PR670, PR1000 PR1050 PR1055

Our Price: $999.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval



Special Facts about PE-DESIGN 11
PE-DESIGN 11 is a feature-packed software that offers you so much for your sewing, embroidery, quilting and crafting projects. As a matter of fact, if you have former models of the ScanNCut Home and Hobby Cutting Machines, PE-DESIGN 11 will help you convert the PHX embroidery file format from the Luminaire to FCM for ScanNCut use. PE-DESIGN 11 also offers Wireless LAN Connectivity, exclusive to the Luminaire Innov-ís XP1, which allows a person to transfer designs wirelessly back and forth from your PC to their machine!

PE-DESIGN 11
Packed with powerful and time-saving features, this software is for both the casual hobbyist or the home-based business entrepreneur. Imagine the ability to create your own fonts, stitches and designs once to use many times on hats, pillows, shirts and more. Help reduce the amount of time spent changing threads by using the Intelligent Color Sort feature that will stitch the areas that share one color in groups. Best yet, if you own the Luminaire XP1, enjoy Wireless LAN Connectivity to transfer your embroidery designs and sewing stitches wirelessly.

We have packed this software with so many time-saving features that will help you create more in less time. Imagine the capability to create your own fonts, stitches and designs - just once - to use many times on hats, pillows, shirts, and other fabrics. Reduce the amount of time spent changing threads by using the Intelligent Color Sort feature, which will stitch those areas that share one color in groups.

Brother/Durkee SturdiFrame
  • Must be used with PE Design 11
  • Durkee SturdiFrame 12" x 14" with Instructions
  • For use with PR650 and later models
  • Maximize your embroidery area!
Non-US Warranty: 30 days parts and labor.

Specifications

How to Split Designs in PE Design 11 Digitizing Software:


How to Use the Sturdi Frame After it is Digitized in PE Design 11:

Durkee SAEZTENPP 10 Needle Power Pack TENPP 10in1 for BR/BL10 Needle Machines, 14x14 Multi Position Sturdi Frame, 7PC Set EZ Frames, Arm, PR Cap Frame

Durkee Ten Needle Power Pack 10in1 EZ Frames Hoops Set 3/16" Aluminum for Brother PR6 PR10 & Babylock , Durkee, Fast Frames,  ez, frames, 8, eight, in, one, 1, brother, pr6-pr1050, embroidery, dehoop

90978: Durkee Ten Needle Power Pack 10in1 EZ Frames Hoops Set 3/16" Aluminum for Brother PR6 PR10 & Babylock

Our Price: $679.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee proudly introduces their Ten Needle Power Pack created specifically to “Optimize” ten needle machine owners embroidery experience. This package includes three (3) Best Sellers from Durkee Hoops. Each was designed for its’ own ease of use, practical application for simplifying difficult to hoop items, and for product durability. This package will truly enhance the value and enjoyment of your ten needle machine. The first item is the Durkee 14" x 14" (sewing field) SturdiFrame. It is to be attached to the “B” arms of the 10 needle machine and the frame will be recognized as the 14" x 14" Jumbo hoop. This frame is excellent for split design projects requiring a larger sewing field. Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the “B” arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the frame and press down to adhere the fabric to the backing and stitch!

Smaller projects...no problem! The second item in the Power Pack is the EZ Frame 7 piece combo pack. This incredibly versatile selection of frame sizes makes difficult to hoop items a breeze. Durkee EZ Frames provide a stable platform for your embroidery projects. Better stability means less bounce, better registration, and better results!

The third member of the Power Pack has literally changed thousands of embroiderers' attitudes from refusing to attempt embroidering caps to self-proclaimed cap embroidery artists...the Durkee Multi-Needle Cap Frame. The Durkee Cap Frame offers a sewing field as large as 5" wide and 4 1/2" tall for logos, special designs, or monograms. Perhaps the best of all is its’ simplicity of use;the cap frame fits into the “A” arm of the ten needle machine just like a traditional hoop.

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

*Durkee has less vibration with 3 times the thickness of frames with almost no vibration up and down, compared to Fast Frames.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!


Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Eight (8) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:
  • 2" x 4"
  • 2.5" x 4"
  • 3" x 4"
  • 5" x 4"
  • 7" x 5"
  • 8" x 8"
  • 12" x 8"
  • Cap Back/Radius Frame





    DURKEE HOOP GUARANTEE
    It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
    We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee Hooping Station HPElitePkgPackage Includes one (1) each: HP1 (Full Station), HP Infant Board, HP Junior Board, HP Plus Board, and two (2) HP2

Durkee Hooping Station  HPElitePkgPackage Includes one (1) each: HP1 (Full Station), HP Infant Board, HP Junior Board, HP Plus Board, and two (2) HP2 (Project Stations)

Durkee Hooping Station HPElitePkgPackage

Our Price: $1,315.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Non-US Warranty: 30 days parts and labor.

Durkee M.S.K Embroidery Hoop Deluxe Multi Needle Starter Kit, 11in1 Frames for Brother PR6 PR1000, Baby Lock 6 & 10 Needle Machines

Durkee, M.S.K., Durkee M.S.K, Embroidery Hoop, Starter Kit, 10in1 Frames, for Brother PR6, PR1000, Baby Lock, 6 & 10 Needle, Machines


Our Price: $664.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” M.S.K. Hoops for Brother PR6 and PR1000, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Durkee’s Starter Kits feature Durkee Hoops & Frames for Brother and Baby Lock 6 & 10 needle machines as well as their new Alliance/Persona Single Needle/Tubular Arm machines.

Each kit contains the three (3) most popular size traditional Durkee tubular hoops for these machines: One (1) - 24cm x 24cm (9" x 9"), One (1) - 12.5cm x 24cm (5" x 9"), and One (1) - 15cm x 15cm (6" x 6"). The “Kit” also contains One (1) - Durkee Cap Frame and One (1) - complete EZ Frame 7 Piece Combo Pack.

Stability
Due to their 3/16" thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

The Kit contains:
One (1) - 24cm x 24cm (9" x 9")
One (1) - 12.5cm x 24cm (5" x 9")
One (1) - 15cm x 15cm (6" x 6")

Seven (7) piece combo pack also includes the Main Attachment Arm and one (1) each of the following frames:
  • 2" x 4"
  • 2.5" x 4"
  • 3" x 4"
  • 5" x 4"
  • 7" x 5"
  • 8" x 8"
  • Cap Back/Radius Frame


    Durkee EZ Frames from Emanuel Neiconi on Vimeo.









    DURKEE HOOP GUARANTEE
    It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
    We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee A.S.K. Embroidery Hoop Starter Kit, 11in1 Tubular Frames for Brother Persona PRS100, Babylock Alliance BNAL

Durkee, A.S.K., Embroidery, Hoop, Starter, Kit, for, Alliance, Persona PRS100, Kit


Our Price: $664.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” A.S.K for Brother PRS100 Persona machine, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Durkee’s Starter Kits feature Durkee Hoops & Frames M.S.K. for Brother and Baby Lock 6 & 10 needle machines AND their new Alliance/Persona Single Needle/Tubular Arm machines.

Each kit contains the three (3) most popular size traditional Durkee tubular hoops for these machines: One (1) - 24cm x 24cm (9" x 9"), One (1) - 12.5cm x 24cm (5" x 9"), and One (1) - 15cm x 15cm (6" x 6"). The “Kit” also contains One (1) - Durkee Cap Frame and One (1) - complete EZ Frame 7 Piece Combo Pack.

Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

The Kit contains:
One (1) - 24cm x 24cm (9" x 9")
One (1) - 12.5cm x 24cm (5" x 9")
One (1) - 15cm x 15cm (6" x 6")

Seven (7) piece combo pack also includes the Main Attachment Arm and one (1) each of the following frames:
  • 2" x 4"
  • 2.5" x 4"
  • 3" x 4"
  • 5" x 4"
  • 7" x 5"
  • 8" x 8"
  • Cap Back/Radius Frame


    Durkee EZ Frames from Emanuel Neiconi on Vimeo.









    DURKEE HOOP GUARANTEE
    It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
    We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Frames 12in1 Master Set 8pc: Adaptor arm + 1-1/2"x 4", 3"x 8", 5"x 8" & 12"x 4" for Brother PR, Babylock 6-10 Needle Machines Only

Durkee EZFrames, Master Set, blue adaptor arm, 1 1/2"x 4", 3"x 8", 5"x 8" & 12"x 4" ,EZ Frames, Brother, Baby Lock, 6 & 10 Needle Machines Only

94151: Durkee Hoops EZFrames 12in1 Master Set: 12 Most Popular Size EZ Frames PLUS Blue Adaptor Arm EZ for Brother PR/Babylock 6-10 Needle Machines Only

Our Price: $529.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

The two most frequently heard comments from EZ Frame owner/users are:
“I can’t believe how stable they are” and “I’ll never hoop again!”


There is no substitute for having the frames you need - when you need them! From baby bibs to boots, Onesies® to tote bags, tea towels to bath towels, pockets to purses, table napkins to tennis shoes and more...


The EZ Frames Master Set is ready to go to work on your next embroidery project! This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sewing Fields)
  • 1 1/2" x 4"
  • 2" x 4"
  • 2 1/2" x 4"
  • 3" x 4"
  • 3" x 8"
  • 5" x 4"
  • 5" x 8"
  • 7" x 5"
  • 8" x 8"
  • 12" x 4"
  • 12" x 8"
  • Radius Frame


    How to use the Durkee easy frames.


    Tips for Maximizing Your Sewing Field with EZ Frames from Durkee
Non-US Warranty: 30 days parts and labor.

Specifications

The EZ Frames Master Set is ready to go to work on your next embroidery project!
This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sewing Fields)
1 1/2" x 4"
2" x 4"
2 1/2" x 4"
3" x 4"
3" x 8"
5" x 4"
5" x 8"
7" x 5"
8" x 8"
12" x 4
12" x 8"
Radius Frame

Durkee Hoops EZ Framer MAX Pro Pack: EZ Framer MAX PLUS Hooping Station, 12in1 Piece EZ Frame Master Set EZ Frames for BroPR/BL 6 & 10 Needle Machines

Durkee EZFrames, Master Set, blue adaptor arm, 1 1/2"x 4", 3"x 8", 5"x 8" & 12"x 4" ,EZ Frames, Brother, Baby Lock, 6 & 10 Needle Machines Only, Durkee, Embroidery, Hoops, EZ Framer MAX, 16.5"

Durkee Hoops EZ Framer MAX Pro Pack: EZ Framer MAX PLUS 12in1 Piece EZ Frame Master Set EZ Frames for Br/BL 6 & 10 Needle Machines Only

Our Price: $999.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee has taken the hassle out of hooping! The EZ Framer MAX is an easy, simple device anyone can use, understand, and enjoy that makes embroidery more fun!

Introducing the
EZ Framer MAX Pro Pack

The EZ Frames 12 PC Master Set and EZ Framer MAX are perfect partners for making your embroidery projects faster, easier, and more fun!
Most embroiderers agree their two greatest challenges with embroidery are hooping and centering a design within a hoop. Just imagine...no thumbscrews, no hoop pop-off, no hoop burn! With Durkee EZ Frames you don’t have to imagine! And, getting your garment perfectly centered on your frame or hoop has never been easier than now with the EZ Framer MAX!

EZ Framer MAX
  • Easy to understand - easy to use hooping device for the home or commercial embroiderer
  • Eliminates table hooping/framing
  • Cross-hair laser light makes centering designs quick and easy
  • Lightweight - is portable or can be mounted permanently
  • Use any hoop/frame from any manufacturer up to 16 1/2" O.D.

    The EZ Frames Master Set is ready to go to work on your next embroidery project! This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sewing Fields)
  • 1 1/2" x 4"
  • 2" x 4"
  • 2 1/2" x 4"
  • 3" x 4"
  • 3" x 8"
  • 5" x 4"
  • 5" x 8"
  • 7" x 5"
  • 8" x 8"
  • 12" x 4"
  • 12" x 8"
  • Radius Frame

    See for yourself just how simple hooping and alignment can be going from start to finish with EZ Frames and the EZ Framer MAX:

    EZ Framer Max from Brent Taylor on Vimeo.



Non-US Warranty: 30 days parts and labor.

Durkee HP1 Hooping Pro Full Station Uses almost any size or style hoop: tubular, magnetic, wooden, single needle...no additional attachments required

Durkee, HP1, Hooping, Pro, Full, Project, Station, Uses, Almost, Any, Hoop, Size*


Our Price: $595.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features


Ten Reasons To Own The Durkee Hooping Pro



No Additional Purchases*for Tubular Hoops, Magnetic Hoops, Wooden Hoops, and Single Needle Hoops, No Additional Attachments or Fixtures Required.

Please note the project stations are sold separately.

Use almost any size hoop from any manufacturer including traditional tubular hoops, wooden hoops, or magnetic hoops. There are NO ADDITIONAL purchases to be made for parts, pieces, or fixtures to accommodate different size hoops.



Two Stations
Two Hooping Pro stations available – A “Full Station” for polo shirts, t-shirts, jackets, etc. and an optional narrower “Project Station” for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.

Cross-Hair Laser Light
The “Full Station” comes with a fully adjustable cross-hair laser light with articulating arm to assist in centering and aligning.

Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.

Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.

Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.

Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.

Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.

Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.

Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.
Non-US Warranty: 30 days parts and labor.

Specifications

PLEASE NOTE: THE VIDEO IS FOR EDUCATIONAL PURPOSES. THIS DOES NOT MEAN WHAT YOU SEE IN THE VIDEO IS INCLUDED WITH THE PURCHASE OF THIS ITEM.

Click here to watch the Durkee Hooping Pro – Introduction


Durkee Hooping Pro-Left Chest and Jacket Back


Durkee Hooping Pro – Freedom Ring Demo:


Optional Durkee Project Station Demo:


Optional Durkee Project Stations Plus Boards:

Durkee HP Hooping Pro Combo Professional Package: Full Station Board, Stabilizing Legs, Junior Station Board, Stabilizing Leg

Durkee HP Hooping Pro Station: Combo Professional Package


Our Price: $825.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Package Includes: One (1) Hooping Pro Full Station, One (1) Hooping Pro Project Station w/One (1) set of Stabilizing Legs, and One (1) Hooping Pro "junior" Board w/ One (1) Additional Set of Stabilizing Legs

Non-US Warranty: 30 days parts and labor.

Durkee Hoops EZ Framer MAX Hooping Station For All Hoops and Frames Up To 16.5" with Cross Hair Laser Light for Embroidery Positioning

Durkee Hoops EZ Framer MAX Hooping Station For All Hoops and Frames Up To 16.5" with Cross Hair Laser Light

94150: Durkee Hoops EZ Framer MAX For All Hoops and Frames Up To 16.5"

Our Price: $495.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

A well-known Executive in the embroidery industry once said, “There are only two major challenges in embroidery. The first is hooping.”
Then came the reply, “What is the second?”
“If you solve the first there is no second,” he said.

Introducing the
EZ Framer MAX

  • Easy to understand - easy to use hooping device for the home or commercial embroiderer
  • Eliminates table hooping/framing
  • Cross-hair laser light makes centering designs quick and easy
  • Lightweight - is portable or can be mounted permanently
  • Use any hoop/frame from any manufacturer up to 16 1/2" O.D.

    See for yourself just how simple hooping and alignment can be going from start to finish with the
    EZ Framer MAX:

    EZ Framer Max from Brent Taylor on Vimeo.

Non-US Warranty: 30 days parts and labor.

Specifications

Durkee Embroidery was founded with the concept of providing lower cost, higher quality products for the embroidery industry. We utilized our extensive manufacturing experience to create the most widely distributed tubular hoop line in the world today.

DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects within the contiguous 48 United States. We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices. We also offer a total satisfaction guarantee. We will refund or exchange any product within 30 days of purchase for any reason.

UNBREAKABLE TUBULAR EMBROIDERY HOOPS
Get the durability you expect and need from a plastic embroidery hoop without the expense. Durkee Embroidery has embroidery hoops available for Tajima, Barudan, Brother, Happy, Melco, SWF, Toyota, and ZSK embroidery machines. Try our embroidery hoops and you will never overpay for hoops again

Durkee 6in1 Single Needle Power Pack 2 Brother XP1 XP2 Luminaire, Baby Lock Solaris Machine: 5 Hoops (4x4 5x7 8x8 9.5x9.5 10-5/8x16) +Cap Insert 5x7

Durkee, Embroidery Hoop, Luminaire, Solaris, Cap Frame, Single Needle Power Pack, 4x4", 5x7", 8x8", 9.5x9.5", 10 5/8 x 16", Durkee Single Needle Power Pack 2 Brother XP1 XP2 Luminaire, Baby Lock Solaris Machine: 5 Hoops (4x4", 5x7", 8x8", 9.5x9.5", 10 5/8 x 16") +Cap Insert

93639: Durkee Single Needle Power Pack 2 Brother XP1 XP2 Luminaire, Baby Lock Solaris Machine: 5 Hoops (4x4", 5x7", 8x8", 9.5x9.5", 10 5/8 x 16") +Cap Insert

Our Price: $564.80
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing the
Brother/Baby Lock Single Needle Power Pack

The Brother Luminaire and Baby Lock Solaris embroidery machines are the envy of the embroidery industry. These machines are jamb-packed with cutting-edge technological innovations and features few would have dreamed possible just a few years ago. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack Two compliments your machine and will help answer that question for you. First, imagine not having to hoop your projects with traditional plastic hoops. And, what if you could use your machine to do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible.
The set includes:
Non-US Warranty: 30 days parts and labor.

Specifications

See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!

Durkee Single Needle Power Pack 1 for Dream Machine2 and Baby Lock Destiny Includes: 5 Hoops (4x4", 5x7", 8x12", 9.5x9.5" 9.5x14"), +CapInsert

Durkee Single Needle Power Pack 1 for Dream Machine2 and Baby Lock Destiny Includes: 5 Hoops (4x4", 5x7", 8x12", 9.5x9.5" 9.5x14"), +CapInsert

Durkee Single Needle Power Pack 1 for Dream Machine2 and Baby Lock Destiny Includes: 5 Hoops (4x4", 5x7", 8x12", 9.5x9.5" 9.5x14"), +CapInsert

Our Price: $534.80
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing the
Brother/Baby Lock Single Needle Power Pack


As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. First, imagine not having to hoop your projects with traditional plastic hoops. Second, what if you could use your machine to do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible.
The set includes
Non-US Warranty: 30 days parts and labor.

Specifications

See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!

Durkee EZ Framer PLUS with Laser Light Clamps to Hoop the Back of Caps, Onesies, Tote Bags, Shirt Sleeves, Shirt Cuffs, and More!

Durkee EZ Framer, PLUS 2-C Clamps to hoop the back of caps, onesies, tote bags, shirt sleeves, shirt cuffs, and more!


Our Price: $395.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee is proud to introduce our new EZ Framer PLUS. The EZ Framer PLUS simplifies the hooping/framing process for both the novice and veteran embroiderer as well.

Weighing less than 7 pounds, it is lightweight and totally portable.

The unit comes with two (2) “C” clamps for quick setup or, it can be mounted permanently to a work surface.

Industry experts estimate over 95% of all embroidered items require a hoop or frame 15cm in size or smaller. The EZ Framer PLUS will accommodate hoops and frames from the smallest sizes up to 21cm round hoops - 7 1/4" magnetic Mighty Hoops, and Durkee EZ Frames up to 7 1/4".


Non-US Warranty: 30 days parts and labor.

Specifications

Durkee is proud to introduce our new EZ Framer PLUS. The Durkee EZ Framer PLUS simplifies the hooping/framing process for both the novice and veteran embroiderer as well. Weighing less than 7 pounds, it is lightweight and totally portable. The unit comes with two (2) “C” clamps for quick setup or, it can be mounted permanently to a work surface. Industry experts estimate over 95% of all embroidered items require a hoop or frame 15cm in size or smaller. The Durkee EZ Framer PLUS will accommodate hoops and frames from the smallest sizes up to 21cm round hoops - 7 1/4" magnetic Mighty Hoops, and Durkee EZ Frames up to 7 1/4". Please watch the attached two (2) videos introducing and demonstrating the Durkee EZ Framer PLUS and see for yourself how easy it can be to hoop the back of caps, onesies, tote bags, shirt sleeves, shirt cuffs, and more!



EZ Framer Plus Demonstration from Brent Taylor on Vimeo.




Introduction to Durkee EZ Framer Plus from Brent Taylor on Vimeo.

Durkee 12in1 Embroidery Hoop Package for the Brother PR1055X and Babylock Venture, 12 piece EZ Frame Master Set, 3 SizesSturdiFrames, Multi-Needle Cap

BLPROVENTURE, Durkee, Embroidery Hoop, Package, Brother, PR1055X, Babylock, Venture, BLPROVENTURE, Durkee 12in1 Embroidery Hoop Package for the Brother PR1055X and Babylock Venture

Durkee Embroidery Hoop Package for the Brother PR1055X and Babylock Venture

Our Price: $999.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Introducing the new Durkee Package for the Brother PR1055X and Babylock Venture!

Includes
  • 12 piece EZ Frame Master Set
  • Three SturdiFrames
  • Multi-Needle Cap Frame

    The EZ Frames Master Set is ready to go to work on your next embroidery project!
    This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sizes indicate Sewing Fields)
  • 1 1/2" x 4"
  • 2" x 4"
  • 2 1/2" x 4"
  • 3" x 4"
  • 3" x 8"
  • 5" x 4"
  • 5" x 8"
  • 7" x 5"
  • 8" x 8"
  • 12" x 4
  • 12" x 8"
  • Radius Frame

    SturdiFrames
    SturdiFrames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms. Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the frame, press down to adhere the fabric to the backing and stitch!

    Durkee Cap Frame
    Durkee’s cap frame attaches to a multi-needle machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.

    This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.

Non-US Warranty: 30 days parts and labor.

Specifications

How to use the Durkee EZ Frames


Tips for Maximizing Your Sewing Field with EZ Frames from Durkee

Durkee BLPROSOLII 10in1 Embroidery Hoop Package for Babylock Solaris 1 & 2, Brother XP1, XP2 Luminaire

Durkee, Embroidery Hoop, Package, Brother, XP2, Babylock, Solaris II, BLPROSOLII, Durkee 10in1 Embroidery Hoop Package for Brother XP1 XP2 Babylock Solaris

99232: Durkee BLPROSOLII 10in1 Embroidery Hoop Package for Babylock Solaris 1 & 2, Brother XP1, XP2 Luminaire

Our Price: $999.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Introducing the new Durkee Package for the Brother XP2 and Babylock Solaris II!

Includes
  • 10 Single Needle EZ Frames
  • Single Needle Cap Frame Insert

    Introducing Durkee “EZ Frames” for single-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

    Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

    Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

    Save - A lower purchase price means up-front savings and higher operating speeds
    means more production in less time!

    Embroidery hoops are indispensable tools for working embroidery. They come in a wide range of sizes, styles and materials, and every company has their own favorite brand. Using a hoop also makes it easier to count the threads when worked a counted thread projects.

    Before starting the project, the embroidery fabric is placed in the hoop, pulling it taunt and tightening the outer hoop to hold the fabric into position. This taunt fabric base makes it easier to create well-formed stitches that are evenly spaced and uniform in size, as compared to holding the fabric in the hands without a hoop, which can cause the stitch tension to be too tight or too loose. Your choice of size and shape depends entirely on the project and your preference, however, when selecting a hoop, remember that the fabric must completely fill the hoop in order to keep it tight.

    When browsing and buying hoops, you will notice that some hoops tighten and loosen with a thumb screw, while others are tension or spring operated or have sections that snap together without tightening.

    Hoops that are tension or spring operated are made from a combination of metal and plastic and have a lip. There are also different material that the hoops can be made out of. Wooden hoops, which can be made from pine, hardwood or bamboo do not have a lip. Metal hoops are durable and will last longer than any other type of hoop.

    When using an embroidery hoop the hoop is attached to the stands with either a clamp, or secured in place through the sides of the hoop using wing nuts or thumb screws and now even magnets. No Thumbscrews.
Non-US Warranty: 30 days parts and labor.

Specifications

Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops

Durkee 9 Embroidery Double Height Hoops Frames Brackets for Janome MB4 MB7

Durkee All 9 Embroidery Double Height Hoops & Frames: Round 3.5" 4.375" 5.625" 6.75" Square 6x6" 9x9" Rectangle 12x4" 12x6" for Janome MB4 EP4 Machines


Our Price: $399.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Hoop picture SHOWS THE HOOPS ONLY but are shipped to you WITH THE BRACKETS ATTACHED for Janome MB4! EZ TURN Thumbscrews

Includes the following (9) Durkee Embroidery Hoops for the Janome MB4 Embroidery Machine

Double height, 9cm (3.5") round frame
Common uses: cuffs, collars, pockets, hat sides

Double height, 12cm (4 3/8") round frame
Common uses: hat backs, hat sides, smaller left chest

Double height, 15cm (5 5/8") round frame
Common uses: most popular left chest size

Double height, 15cm x 15cm (6"×6") square frame
Common uses: tote bags, back packs, small jacket backs

Double height, 18cm (6 3/4” Diameter) round frame
Common uses: larger left chest, small jacket back

Double height, 24cm x 24cm (9″×9″) square frame
Common uses: Children’s clothing, larger square designs round hoops cannot accommodate

30cm x 10cm (12"×4") rectangle frame
Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke

30cm x 15cm (12″×6″) rectangle frame
Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke

12.5x24cm-360 5x9" rectangle frame
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves

These hoops carry a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.

Grids not available.

MB-4 Embroidery Hoop Help Page Download (.PDF)

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.

Durkee 9 Hoops Round: 3.5, 4.5, 5.5, 7, Squares: 6x6, 5x9, 9x9, Large: 12x4, 12x6" for Brother PR6-1000 and Babylock

Durkee 9 Emb Hoops, Frames, 3.5", 4.5", 5.5", 7", 6x6", 5x9", 9x9", 12x4", 12x6", Durkee 9, Embroidery, Frames, Hoops, Brackets, for Brother, PR600, PR620, PR650, pr655, PR1000, BabyLock EMP6, BMP8, BMP9, ENT10, bnt10


Our Price: $369.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Includes the following 9 Durkee Embroidery Hoops:

PR09 9cm, 3.5" (3 3/16"Diameter) Round Embroidery Frame Hoop & Brackets
Double height, 9cm (3.5") round frame. Fits Brother PR600/Baby Lock machines. Common uses: cuffs, collars, pockets, hat sides.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached.

PR12 12cm 4.5" (4 3/8"Diameter) Round Frame Hoop & Brackets
Double height, 12cm (4.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: hat backs, hat sides, smaller left chest.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached.

PR15 15cm or 5.5" (5 5/8" Diameter) Round Embroidery Frame Hoop & Brackets
Double height, 15cm (5.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: most popular left chest size.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached.

PR1515,15x15cm (6x6") Square Embroidery Frame Hoop & Brackets
Double height, 15cm x 15cm (6″×6″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: tote bags, back packs, small jacket backs.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached.

PR18 18cm, 7" (6 3/4" Diameter) Round Embroidery Frame Hoop & Bracket
Double height, 18cm (7") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: larger left chest, small jacket back.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached.

PR2424 24cm x 24cm (9"x9") Square Embroidery Frame Hoop & Brackets
Double height, 24cm x 24cm (9″×9″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: Children’s clothing, larger square designs round hoops cannot accommodate.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.

Ships with the brackets attached.

PR3010 30x10cm (11 7/8" x 4") Rectangle Emb Frame Hoop & Brackets
30cm x 10cm (12″×4″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.

Ships with the brackets attached.

PR3015 30x15cm (12x 6") Rectangle Embroidery Frame Hoop & Bracket
30cm x 15cm (12″×6″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached. Grids not available.

12.5x24cm-500 5x9" Rectangle Embroidery Frame Hoop & Brackets

Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.



Durkee Embroidery - Hooping Tips from Brent Taylor on Vimeo.



Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.

Durkee 8in1 EZ Frames +Arm for Brother PR600-1055X & BL, Heavy Duty 3/16" Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8 8x12"+Cap Back/Radius Frame

Durkee, Fast Frames,  ez, frames, 8, eight, in, one, 1, brother, pr6-pr1050, embroidery, dehoop

66290: Durkee 8in1 EZ Frames Tubular Hoops 3/16" Aluminum, Brother PR6's PR1000's

Our Price: $369.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

*Durkee has less vibration with 3 times the thickness of frames with almost no vibration up and down, compared to Fast Frames.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!


Durkee EZ Frames from Emanuel Neiconi on Vimeo.





Infant Bodysuit Using Durkee EZ Frames and Multi Needle Embroidery Machine from Brent Taylor on Vimeo.




Infant Bodysuit Using Durkee EZ Frames and Multi Needle Embroidery Machine from Brent Taylor on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

ABOUT THE PRODUCT
Durkee‡ frames offer you a simple, yet effective way to hoop your more difficult-to-hoop items. Hold your fabric in place with our adhesive stabilizer and start stitching. This 8-piece set comes with the Main Attachment Arm, (1) 2” x 4”, (1) 2.5” x 4”, (1) 3” x 4”, (1) 5” x 4”, (1) 7” x 5”, and (1) 8” x 8” hoops, and Cap Back/Radius frame. Comes with Durkee’s limited lifetime replacement warranty. Adhesive stabilizer, SA5820 or SA5815 is required. Additional purchase required.

Eight (8) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:
  • 2" x 4"
  • 2.5" x 4"
  • 3" x 4"
  • 5" x 4"
  • 7" x 5"
  • 8" x 8"
  • 12" x 8"
  • Cap Back/Radius Frame





    DURKEE HOOP GUARANTEE
    It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
    We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee SAC4PCSNXP 4pc Package #6 Single Needle EZ Frames 4in1: 10-5/8x16, 9.5x9.5, 5x7, 4x4 Frames Combo for XP1 XP2 Luminaire and Babylock Solaris

Durkee, ez, frames, 7, seven, in, one, 1, brother, luminaire xps,  embroidery, dehoop, Durkee Package #6 Single Needle EZ Frames 4in1: 10-5/8x16, 9.5x9.5, 5x7, 4x4 Frames for XP1 Luminaire and Babylock Solaris

90944: Durkee Package #6 Single Needle EZ Frames 4in1: 10-5/8x16, 9.5x9.5, 5x7, 4x4 Frames for XP1 Luminaire and Babylock Solaris

Our Price: $333.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Durkee 7in1 EZ Single Frames & Arm: Brother PR600-PR1050, Heavy Duty 3/16" Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8"+Cap Back Ø(Fast Frames+)*

Durkee, SAEZ7MN, EZ-7PC-PR6-10 , ez, frames, 7, seven, in, one, 1, brother, pr6-pr1000, embroidery, dehoop

65692: Durkee SAEZ7MN 7in1 EZ Single Frames Tubular Hoops 3/16" Aluminum for Brother PR6 PR1000 1050X

Our Price: $325.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!


Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

ABOUT THE PRODUCT
Durkee‡ frames offer you a simple, yet effective way to hoop your more difficult-to-hoop items. Hold your fabric in place with our adhesive stabilizer and start stitching. This 7-piece set comes with the Main Attachment Arm, (1) 2” x 4”, (1) 2.5” x 4”, (1) 3” x 4”, (1) 5” x 4”, (1) 7” x 5”, and (1) 8” x 8” hoops, and Cap Back/Radius frame. Comes with Durkee’s limited lifetime replacement warranty. Adhesive stabilizer, SA5820 or SA5815 is required. Additional purchase required.

Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:

Durkee SAEZ7PRS 7in1 EZ Frames for Brother PRS100 & Babylock, Heavy Duty 3/16" Thick Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8+Cap Back/Radius

Durkee, SAEZ7PRS, EZ-7 PC PRS100, ez, frames, 040232372377, 040232372360, 7, seven, in, one, 1, brother, prs100, persona embroidery, dehoop

65755: Durkee SAEZ7PRS 7in1 EZ Frames Tubular Hoops 3/16" Aluminum for Brother PRS100 Persona, Babylock Alliance

Our Price: $325.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for Brother PRS100 Persona machine, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Durkee 7in1 EZ Frames are demonstrated on Brother PR6-1000, but applicable to the PRS100 Persona

Durkee EZ Frames from Emanuel Neiconi on Vimeo.



Note: The primary uses for the radius frame are: back of hats, deep pockets on backpacks, and to embroider the belly area of embroiderable stuffed animals. But the complete answer is – any item it fits. Also, on the subject of hats, the 2” x4”, 2 ½” x 4”, and 3” x 4” frames are frequently used to embroider the “sides” of hats. Durkee
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:

Durkee 7in1 EZ Tubular Hoops 3/16" HD Aluminum Frames for Janome MB4, 2x4 2.5x5 3x4 5x4 7x5 8x8"+Cap Back/Radius Frame

Durkee, ez, frames, 7, seven, in, one, 1, embroidery, dehoop


Our Price: $325.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” f EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

The video is used to demonstrate Durkee 7in1

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:
  • 2" x 4"
  • 2.5" x 4"
  • 3" x 4"
  • 5" x 4"
  • 7" x 5"
  • 8" x 8"
  • Cap Back/Radius Frame





    DURKEE HOOP GUARANTEE
    It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
    We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Frames 4in1 Single Needle Package #3: 6.25x10x25" 6x6" 5x7" 4x4" Hoops for Brother NQ1400E, NQ3500D, NV2800, NV2500, NV1500, Babylock 6x10"

Durkee, EZ, SN-4pc, BR/BL, PKG3, Frame, Single, Needle, Package, 3, Durkee EZ Frames 4in1 Single Needle Package 3: 6.25x10x25" 6x6" 5x7" 4x4" Hoops for Brother NQ1400E, NQ3500D, NV2800, NV2500, NV1500, Babylock


Our Price: $295.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.

Durkee 7in1 EZ Frames Melco Bravo Bernina E16, Heavy Duty 3/16" Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8"+Cap Back/Radius (like Fast Frames)*

Durkee, Fast Frames,  ez, frames, 7, seven, in, one, 1, Melco Bravo, and Bernina E16, embroidery, dehoop


Our Price: $325.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!


Durkee EZ Frames from Emanuel Neiconi on Vimeo.




Durkee Embroidery - Hooping Tips from Brent Taylor on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:

Durkee EZ Frames 4in1 Package #1 for Single Needle Machines 9.5x14 8x12 5x7 4x4 Hoops for XV85 Dream, XP1 XP2 Luminaire, Babylock Destiny, Solaris

Durkee, EZ, SN-4pc, BR/BL, PKG1, Frame, Single, Needle, Package, 1, Durkee EZ Frames 4in1 Single Needle Package 1: 9.5x14" 8x12" 5x7" 4x4" for XV8500D, XV8550D, Babylock Destiny

82200: Durkee EZ Frames 4in1 Single Needle Package 1: 9.5x14 8x12 5x7 4x4 Hoops XP1 XV BL

Our Price: $295.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for single-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.

Durkee SAC4PCSNXV Frames 4in1 Single Needle Package4: 8x12 5x7 6x6 4x4 Hoops Brother XV85 BL Destiny, XP1 XP2 Luminaire Solaris XJ1 XE1 VM5200 VM2300*

Durkee, 798304395419, EZ, SN-4pc, BR/BL, PKG1, Frame, Single, Needle, Package, 1, Durkee EZ Frames 4in1 Single Needle Package 1: 9.5x14" 8x12" 5x7" 4x4" for XV8500D, XV8550D, Babylock Destiny

Durkee SAC4PCSNXV EZ Frames 4in1 Single Needle Package k#4: 8x12", 5x7", 6x6", 4x4" Hoops XV XP1 XJ1 XE1 BL

Our Price: $295.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.



{Q} Why won't my machine recognize the correct size of hoop I Have installed on the machine?
{A} On the rare occasion this issue comes up, the answer is the same. . Durkee EZ Frames have nothing to do with the issue. In fact, the customer should take them off and set them aside to fix the problem. The “A” arm of the machine has multiple positioning locations that, when properly aligned, cause the machine to “recognize” the hoop attached to the arm. In this instance the word “recognize” refers ONLY to the hoops that came with the machine or other OEM hoops from Brother available for that machine. Those positions on the “A” arm are small slots or grooves. In order for the machine to recognize the correct hoop, the left side (adjustable arm that moves left and right) must align perfectly in any given slot and the knob that holds it tightly secured. If these two criteria are not met, the machine “assumes” the next smallest size hoop.

Thus, if the customer will remove any/all hoops or frames from the machine and adjust the “A” arm correctly in the proper slot and tighten the thumbscrew/knob securely, the machine will “think” it has a 7 7/8” x 11 7/8” hoop attached and the problem will be solved. This hoop is usually and inaccurately referred to as a 12 x 8 hoop. Brother identifies this hoop as their “Large” hoop. Because the machine “thinks” it has a 12 x 8 hoop in place is why the customer must ALWAYS center their #1 needle in the middle of the EZ Frame or hoop and trace their design.

Durkee EZ Frames 4in1 Single Needle Package #5: 9.5 X 14, 8 X 8, 5 X 7, 4 X 4 Frames

Durkee, ez, frames, 7, seven, in, one, 1, brother, pr6-pr1000, embroidery, dehoop

90943: Durkee EZ Frames 4in1 Single Needle Package #5: 9.5 X 14, 8 X 8, 5 X 7, 4 X 4 Frames

Our Price: $295.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Durkee EZ Frames 4in1 Single Needle Package 2: 7x12" 6x6" 5x7" 4x4" Hoops for Brother VE2200 VM5100 VM6200D, Quattro, NV5000 NV4750 NV4500, NV4000, BL

Durkee, EZ, SN-4pc, BR/BL, PKG2, Frame, Single, Needle, Package, 2, Durkee EZ Frames 4in1 Single Needle Package 2: 7x12" 6x6" 5x7" 4x4" for VE2200, VM5100, VM6200D,


Our Price: $295.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.

Durkee EZ Framer PLUS 2-C Clamps to Hoop Station Tubular Items: Back of Caps, Onesies, Tote Bags, Shirt Sleeves, Shirt Cuffs, and More!

Durkee EZ Framer, PLUS 2-C Clamps to hoop the back of caps, onesies, tote bags, shirt sleeves, shirt cuffs, and more!

84460: Durkee EZ Framer PLUS 2-C Clamps to Hoop Station Tubular Items

Our Price: $295.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee is proud to introduce our new EZ Framer PLUS. The EZ Framer PLUS simplifies the hooping/framing process for both the novice and veteran embroiderer as well.

Weighing less than 7 pounds, it is lightweight and totally portable.

The unit comes with two (2) “C” clamps for quick setup or, it can be mounted permanently to a work surface.

Industry experts estimate over 95% of all embroidered items require a hoop or frame 15cm in size or smaller. The EZ Framer PLUS will accommodate hoops and frames from the smallest sizes up to 21cm round hoops - 7 1/4" magnetic Mighty Hoops, and Durkee EZ Frames up to 7 1/4".


Non-US Warranty: 30 days parts and labor.

Specifications

Durkee is proud to introduce our new EZ Framer PLUS. The Durkee EZ Framer PLUS simplifies the hooping/framing process for both the novice and veteran embroiderer as well. Weighing less than 7 pounds, it is lightweight and totally portable. The unit comes with two (2) “C” clamps for quick setup or, it can be mounted permanently to a work surface. Industry experts estimate over 95% of all embroidered items require a hoop or frame 15cm in size or smaller. The Durkee EZ Framer PLUS will accommodate hoops and frames from the smallest sizes up to 21cm round hoops - 7 1/4" magnetic Mighty Hoops, and Durkee EZ Frames up to 7 1/4". Please watch the attached two (2) videos introducing and demonstrating the Durkee EZ Framer PLUS and see for yourself how easy it can be to hoop the back of caps, onesies, tote bags, shirt sleeves, shirt cuffs, and more!



EZ Framer Plus Demonstration from Brent Taylor on Vimeo.




Introduction to Durkee EZ Framer Plus from Brent Taylor on Vimeo.

Durkee HP2 Hooping Pro Project Station: for Embroidery Design Placement on Sleeves, Legs, Hat Backs, and Bags

Durkee, HP2, Hooping, Pro, Project, Station, Sleeve, Leg, Hat, Back, Bag


Our Price: $225.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features


Great for smaller, narrower embroidery projects such as shirt sleeves, pant legs,
Two Stations
Two Hooping Pro stations are available – An optional “Full Station” for polo shirts, t-shirts, jackets, etc. and the narrower “Project Station” on this page for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.

Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.

Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.

Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.

Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.

Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.

Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.





Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.
Non-US Warranty: 30 days parts and labor.

Specifications



Durkee Project Station Demo:


Durkee Project Stations Plus Boards:


Click here to watch the Optional Durkee Hooping Pro – Introduction


Durkee Optional Hooping Pro-Left Chest and Jacket Back


Optional Durkee Hooping Pro – Freedom Ring Demo:

Durkee Kickstart 4in1 EZ Frames Tubular Hoops 3/16" Aluminum for Brother PRS100 Persona, Babylock Alliance BNAL

Durkee, EZ-4 PC PRS100, ez, frames, 798304395631, 4, four, in, one, 1, brother, prs100, persona embroidery, dehoop


Our Price: $229.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

No hoop pop-off * No hoop burn * Less stress on fingers and hands * User friendly

Introducing Durkee “EZ Frames” for Brother PRS100 Persona machine, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Durkee proudly introduces our “Kick-Start Combo” Four (4) piece EZ Frame Set. This set was created with two specific goals in mind...

1. Create a simplified, less expensive, way to own EZ Frames - one of the most popular and sought after products in the embroidery industry!

2. Allow embroiderers to determine for themselves what additional frames they choose to add to their
collection and when to add them.


Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Consider Purchasing the Durkee 7in1 EZ Frames are demonstrated demonstrated here on Brother PR6-1000, but applicable to the PRS100 Persona. Purchasing the 7in1 option (in recommended accessories below) ads the 2.5 x 5", Cap Back Frame and 3 x 4 EZ frames. The 7in1 is a separate purchase.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.



See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Four (4) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:

Durkee EZ-4 PC PR 6 & 10 Needle Kickstart 4in1 EZ Frames Tubular Hoops 3/16" Aluminum for Brother PR6 PR1000 1050X Babylock 2x4 5x4 7x5 8x8"for A Arms

Durkee EZ-4 PC PR 6 & 10 Needle Kickstart 4in1 EZ Frames Tubular Hoops 3/16" Aluminum for Brother PR6 PR1000 1050X 2x4 5x4 7x5 8x8"for A Arm, Durkee, Kick Start, EZ-4PC-PR6-10 , ez, frames, 4, four, in, one, 1, brother, pr6-pr1000, embroidery, dehoop


Our Price: $229.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

No hoop pop-off * No hoop burn * Less stress on fingers and hands * User friendly

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Durkee proudly introduces our “Kick-Start Combo” Four (4) piece EZ Frame Set. This set was created with two specific goals in mind...

1. Create a simplified, less expensive, way to own EZ Frames - one of the most popular and sought after products in the embroidery industry!

2. Allow embroiderers to determine for themselves what additional frames they choose to add to their
collection and when to add them.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!



Consider Purchasing the Durkee 7in1 EZ Frames are demonstrated demonstrated here on Brother PR6-1000.. Purchasing the 7in1 option (in recommended accessories below) ads the 2.5 x 5", Cap Back Frame and 3 x 4 EZ frames. The 7in1 is a separate purchase.



Durkee EZ Frames from Emanuel Neiconi on Vimeo.



See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:

Durkee 5.5x6" Flat Cap Frame Front, Hat Back Embroidery Hoop, Insert for Janome MB-4, MB-7, MB4S, Melco EP4

Durkee, 5.5x6", Cap, Frame, Front, Hat, Back, Hoop, Janome, MB-4

82415: Durkee 5.5x6" Cap Frame Front, Hat Back Hoop for Janome MB4 MB7

Our Price: $195.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to your machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.

This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.



  • Easy to use - attaches to your machine like a normal hoop
  • Extra-large sewing field - much larger than many cap just like any other hoop embroidery systems and at a fraction of the price
  • Durable but lightweight - all metal construction
  • Can hoop the back of a cap, as well as, the front with anodized aluminum plate and stainless steel arms
  • Vertical slots in the front and back of the frame
  • Comes with Durkee’s lifetime replacement warranty plus, alignment guides to aid in achieving consistent hooping results.

    Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee 5.5x6" Cap Frame Front, Hat Back Hoop for Melco, Bravo, Bernina E16

Durkee, 5.5x6", Cap, Frame, Front, Hat, Back, Hoop,

89950: Durkee 5.5x6" Cap Frame Front, Hat Back Hoop for Melco, Bravo

Our Price: $195.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to your machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.

This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.



  • Easy to use - attaches to your machine like a normal hoop
  • Extra-large sewing field - much larger than many cap just like any other hoop embroidery systems and at a fraction of the price
  • Durable but lightweight - all metal construction
  • Can hoop the back of a cap, as well as, the front with anodized aluminum plate and stainless steel arms
  • Vertical slots in the front and back of the frame
  • Comes with Durkee’s lifetime replacement warranty plus, alignment guides to aid in achieving consistent hooping results.

    Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications


Durkee CF-PR-MN 5.5x6 Flat Cap Frame Front, Hat Back Hoop, Insert for Brother SACFPRS for Persona PRS100, Babylock Alliance BNAL Embroidery Machines

Durkee CF-PR-MNPRS100, Durkee Hat PRS100, SACFPRS, 5.5x6", Cap, Frame, Front, Hat, Back, Hoop, Brother, PR, Baby, lock, 6-10, Needle, Embroidery, Machines


Our Price: $195.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to your machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.

This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.



  • Easy to use - attaches to your machine like a normal hoop
  • Extra-large sewing field - much larger than many cap just like any other hoop embroidery systems and at a fraction of the price
  • Durable but lightweight - all metal construction
  • Can hoop the back of a cap, as well as, the front with anodized aluminum plate and stainless steel arms
  • Vertical slots in the front and back of the frame
  • Comes with Durkee’s lifetime replacement warranty plus, alignment guides to aid in achieving consistent hooping results.

    Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

This Durkee Cap Frame is available for the same price with free shipping for other multi needle machines: Janome MB4, Tajima/Toyota, Happy, Melco/Bernina, SWF. Please call 800-739-7374 or 225-923-1285 to order for brands and models other than Brother PR and Babylock on this page. Thanks.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.

Durkee CF-BRNEW5X7SN Brother SACFSN5X7 Flat Hat Cap Frame Insert fits Inside SA439 EF75 5x7in Hoops for Single Needle NV1500-XP2, Babylock Machines

Durkee, CF-BRNEW5X7SN, Hat, Cap, Frame, Insert, Brother, SA439, Baby, lock, EF75, 5x7", Hoops Online Only


Our Price: $195.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Fits Inside SA439 or Babylock EF75 5X7 Hoops for Brother XP2 XP1 XJ1 XE1 XV8500 VM6200 VM5100 VM5200 VE2200 VE2300 VQ3600 VQ3500, NV6000 6700 6750 5000 4750 4500 4000 2800 2500 1500

Includes Top Blue Frame only, you must have the bottom portion of the SA439 5X7 Embroidery Frame from Brother to use this item

We are delighted to introduce our first new single needle cap frame insert, Introducing Durkee Single Needle Cap Frame Inserts - all metal frames allowing embroiderers to embellish caps with monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into either a Brother 5"x7" Accessory#SA439 hoop or, Baby Lock 5" x 7" Item# EF75 Hoop.

See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place
with sticky backing/stabilizer. Our Single Needle Cap Frame Insert allows the embroiderer to stitch a design or logo approximately 4 1/2" wide and 4 1/2" tall. The frame also provides both vertical and horizontal alignment guides and slots for consistent embroidery placement

Please note: This insert is specifically designed with two - and only two - manufacturer's 5" x 7" hoops that come with the machines designated

Compatible with Brother’s Embroidery Hoop

5" x 7" Accessory #SA439 for the following machines:

Innov-is NV2500D, Innov-is NV1500D, Duetta® NV4500D, Quattro® NV6000D, Innov-is 2800D, Quattro® NV6700D, Isodore® Innov-is NV5000, Duetta®2 NV4750D, DreamWeaver™ XE VM6200D, DreamMaker™ XE VE2200, Quattro® 3
Triliogy Limited Edition Innov-is 6750D, BP2100, DreamCreator™XE VM5100, The Dream Machine XV8500D,


Compatible with Baby Lock’s Embroidery Hoop

5" x 7" Item# EF75 for the following machines:

Destiny, Ellisimo BLSO, Ellisimo Gold BLSOG, Ellisimo GoldII BLSOG,Unity BLTY, Journey BLJY, Ellegante 3 BLG3, Ellegante BLG 2, Ellegante BLG, Ellageo BLL2, Ellageo BLL. Esante BLN, Spirit BLPY, Aventura BLMAV, Flourish BLMFO

The Durkee Single Needle Cap Frame Insert. Monogram the front and back of a hat using the Durkee Single Needle Cap Frame Insert. Click Arrow on Video below to play.


Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.

Durkee CF-PR-MN 5.5x6" Hat Front, Cap Back Frame Brother SACFPRMN & Babylock 6-10 Needle Machines: PR600, PR620, PR650, PR655, PR655X, PR1000, PR1050X

Durkee, CF-PR-MN, SACFPRMN, 5.5x6", Cap, Frame, Front, Hat, Back, Hoop, Brother, PR, Baby, lock, 6, 10, Needle, Embroidery, Machine


Our Price: $195.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

This Durkee Cap Frame is available for the same price with free shipping in USA 48 states for other multi needle machines: Janome MB4, Tajima/Toyota, Happy, Melco/Bernina, and SWFJust Specify Your Brand, Model Number and Name in our Drop Down Menu above. Example: Brother PR1000 Entrepreneur. Thanks. John

Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.

Durkee’s cap frame attaches to a multi-needle machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.

This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.



*Easy to use - attaches to multi-needle machine * Extra-large sewing field - much larger than many cap
just like any other hoop embroidery systems and at a fraction of the price
* Durable but lightweight - all metal construction * Can hoop the back of a cap, as well as, the front.
with anodized aluminum plate and stainless steel arms
* Vertical slots in the front and back of the frame * Comes with Durkee’s lifetime replacement warranty
plus, alignment guides to aid in achieving consistent hooping results.

Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.

Durkee Cap Frame
posted by Rosemary Gulledge Blog on december 7, 2015
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 360NS 5.5x6 Inch Flat Hat Hoop Front Cap Frame Back, Insert for Happy Embroidery Machines

Durkee 360NS 5.5x6" Hat Hoop Front Cap Frame Back for Happy Embroidery Machines


Our Price: $195.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to a multi-needle machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.

This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.



*Easy to use - attaches to multi-needle machine * Extra-large sewing field - much larger than many cap
just like any other hoop embroidery systems and at a fraction of the price
* Durable but lightweight - all metal construction * Can hoop the back of a cap, as well as, the front.
with anodized aluminum plate and stainless steel arms
* Vertical slots in the front and back of the frame * Comes with Durkee’s lifetime replacement warranty
plus, alignment guides to aid in achieving consistent hooping results.

Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

This Durkee Cap Frame is available for the same price with free shipping for other multi needle machines: Tajima/Toyota, Happy, Melco/Bernina, SWF. Please call 800-739-7374 or 225-923-1285 to order for brands and models other than what is on this page. Thanks.

Durkee 14x14 560mm Jumbo Sturdi Frame Multi Position Hoop Complete For B Arms on Brother PR1000 PR1050X Babylock 10 Needle, Add Split Designs Software

NEW! Durkee SturdiFrames for Brother and Babylock 10 Needle Machines

85245: Durkee 14x14" Jumbo SturdiFrame Complete Unit For "B" Arms on Brother and Babylock 10 Needle Machines

Our Price: $189.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

We are proud to announce two the SturdiFrame for Brother and Baby Lock Ten (10) needle machines!!

These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.

The frame measure 14" x 14" (sewing field) and is to be attached to the “B” arms of the 10 needle machine. The frame will be recognized as the 14" x 14" Jumbo hoop. This frame is excellent for split design projects requiring a larger sewing field.

Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Sturdiframe



Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee “Plus” Size Board Attachment Slides on Top of HP2 Project Station

Durkee, Plus, Size, Board, Attachment, Slides, on, Top, of, HP2, Project, Station


Our Price: $150.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features



You must already have the existing HP2 station to use this attachment.

This video explains all three additional station options for the HP2 Product Station.

Non-US Warranty: 30 days parts and labor.

Durkee CFBR444SN, Brother Flat Cap Front, Hat Back Insert for SA444, BLEF26P 5x7 Hoop on NV1000,1200,1250,PE700,PE770,PE780,PE800,DZ820E,NS1150,NS2750

Durkee CFBR444SN 5X7 Hat Frame Insert Brother SA444 5x7" Hoops on NV1000/1200, NV1250, PC6500/8200/8500, PE700/700II PE770/780, DZ820E, SB7900E SB8000


Our Price: $149.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee’s Newest Single Needle Cap Frame Insert - all metal frames allowing embroiderers to embellish caps with monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into a Brother 5"x7" Accessory #SA444 hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer. Our Single Needle Cap Frame Insert allows the embroiderer to stitch a design or logo approximately 4 1/2" wide and 4 1/2" tall. The frame also provides both vertical and horizontal alignment guides and slots for consistent embroidery

placement.
Introducing Durkee’s Newest Single Needle Cap Frame Insert - all metal frames allowing embroiderers to embellish caps with

monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into a Brother 5"x7" Accessory #SA444 hoop. The bill

of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky

backing/stabilizer. Our Single Needle Cap Frame Insert allows the embroiderer to stitch a design or logo approximately 4 1/2" wide and 4 1/2" tall. The frame also provides both vertical and horizontal alignment guides and slots for consistent embroidery placement.

Includes Top Blue Frame only, you must have the bottom portion of the SA444 5X7 Embroidery Frame from Brother to use this item

Compatible with Brother’s Embroidery Hoop 5" x 7" Accessory #SA444 for the following machines:

NV1000 - NV1200 - NV1250D - PC6500 - PC8200 - PC8500 - PC8500D - PE700 - PE700II - PE770 - PE780D - Designio DZ820E - SB7900Et

See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Compatible with Brother’s Embroidery Hoop

5" x 7" Accessory #SA444 for the following machines:NV1000 - NV1200 - NV1250D - PC6500 - PC8200 - PC8500 - PC8500D - PE700 - PE700II - PE770 - PE780D - Designio DZ820E - SB7900E, SB8000

Compatible with Baby Lock’s Embroidery HoopBaby Lock sewing machine models BLR, BLR2, ESE, ESE2, BLMR, and ESL

The Durkee Single Needle Cap Frame Insert. Monogram the front and back of a hat using the Durkee Single Needle Cap Frame Insert. Click Arrow on Video below to play.


Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.

Durkee Sturdi Frames 7-7/8" x 14" for A Arms on Brother PR1000, PR1050X and Babylock 10 Needle Embroidery Machines, Add Adhesive Stabilizers

NEW! Durkee SturdiFrames for Brother and Babylock 10 Needle Machines

85244: Durkee 7 7/8" x 14" 560mm Sturdi Frame Complete Unit For "A" Arms on Brother and Babylock 10 Needle

Our Price: $149.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

We are proud to announce the Durkee SturdiFrames for Brother and Baby Lock Ten (10) needle machines!!

These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.

7 7/8" x 14" (sewing field) and is to be attached to the “A” arms of a 10 needle machine. The frame will be recognized by the machine as the “Extra Large” hoop.

Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Sturdiframe



Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 7-7/8" x 11 3/4" Sturdi Frame for A Arms on Brother and Babylock 6 & 10 Needle Machine, Add Adhesive Stabilizers

NEW! Durkee SturdiFrames for Brother and Babylock 10 Needle Machines

85246: Durkee 7 7/8" x 11 3/4" SturdiFrame for Brother and Babylock 6 & 10 Needle Machine

Our Price: $139.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

We are proud to announce the SturdiFrame for Brother and Baby Lock Ten (10) needle machines!!

These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.

The Size is 7 7/8" x 11 3/4" (sewing field) and is to be attached to the “A” arms of a 10 needle machine.

Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Sturdiframe



Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 7-7/8" x 8" Sturdi Frame for A Arms only -Gold Series on Brother and Babylock 6 & 10 Needle Embroidery Machines, Add Adhesive Stabilizers

NEW! Durkee SturdiFrames for Brother and Babylock 10 Needle Machines

85247: Durkee 7 7/8" x 8" SturdiFrame for Brother and Babylock 6 & 10 Needle Machine

Our Price: $119.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

We are proud to announce the SturdiFrame for Brother and Baby Lock Ten (10) needle machines!!

These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.

The Size is 7-7/8" x 8" (sewing field) and is to be attached to the “A” arms

Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Sturdiframe



Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee EZ Frame 19 5/8" Wide Hoop Holding Arms Only for Brother and Baby Lock 6 & 10 Needle Machines PR655, PR1000, PR1050

Durkee, ez, frames, 7, seven, in, one, 1, brother, pr6-pr1000, embroidery, dehoop

79904: Durkee EZ Frame 19 5/8" Wide Arms Only for Brother/Baby Lock 6 & 10 Needle Machines

Our Price: $99.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Durkee EZ Frame 19 5/8" Wide Arm Only for Brother/Baby Lock 6 & 10 Needle Machines.

The Durkee EZ Frame Wide Arms 19 5/8" for Brother Baby Lock 6 and 10 Needle Machines is the adaptor arm needed to use the Durkee EZ Frames with your machine. Simple and effective system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project tot he underside of the frame. Durkee EZ Frames for Multi Needle Commercial Embroidery Machines have a lifetime replacement warranty against manufacturers defects. This Durkee EZ Frame Wide Arms 19 5/8" for Brother Baby Lock 6 and 10 Needle Machines is what you need to purchase if you are not wanting the complete EZ Frame System. You can then simply add the individual frame you desire.



The Durkee EZ Frame Wide Arms 19 5/8" for Brother/Baby Lock 6 & 10 Needle Machines is compatible with:

Brother PR600
Brother PR600II
Brother PR620
Brother PR650
Baby Lock EMP6
Baby Lock BMP8
Brother PR1000
Baby Lock 10 Needle
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications


Durkee EZ Frames from Emanuel Neiconi on Vimeo.




Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee SAEZLG16XP EZ Frame EZSN10x16 Hoop for Brother Single Needle XP1 XP2 Luminiaire Babylock Solaris 10.5x16" Largest Hoop

Durkee EZ Frame EZSN10x16, for Brother XP1 Luminiaire Babylock Solaris 10.5x16"

90863: Durkee EZ Frame EZSN10x16 for Brother XP1 Luminiaire Babylock Solaris 10.5x16"

Our Price: $119.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.

Durkee EZ Frame SN 9.5x9.5 Hoop for Single Needle Machines Brother XV85, XJ1, XE1 Stellaire, XP1 XP2 Luminaire, Babylock Destiny, Solaris

Durkee EZ Frame SN 9.5x9.5, Hoop for Single Needle Machines Brother XV, XP1 Luminaire, Babylock Destiny, Solaris

Durkee EZ Frame SN 9.5x9.5 Hoop for Single Needle Machines Brother XV85, XJ1, XE1 Stellaire, XP1

Our Price: $89.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for single-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Embroidery hoops are indispensable tools for working embroidery. They come in a wide range of sizes, styles and materials, and every company has their own favorite brand. Using a hoop also makes it easier to count the threads when worked a counted thread projects.

Before starting the project, the embroidery fabric is placed in the hoop, pulling it taunt and tightening the outer hoop to hold the fabric into position. This taunt fabric base makes it easier to create well-formed stitches that are evenly spaced and uniform in size, as compared to holding the fabric in the hands without a hoop, which can cause the stitch tension to be too tight or too loose. Your choice of size and shape depends entirely on the project and your preference, however, when selecting a hoop, remember that the fabric must completely fill the hoop in order to keep it tight.

When browsing and buying hoops, you will notice that some hoops tighten and loosen with a thumb screw, while others are tension or spring operated or have sections that snap together without tightening.

Hoops that are tension or spring operated are made from a combination of metal and plastic and have a lip. There are also different material that the hoops can be made out of. Wooden hoops, which can be made from pine, hardwood or bamboo do not have a lip. Metal hoops are durable and will last longer than any other type of hoop.

When using an embroidery hoop the hoop is attached to the stands with either a clamp, or secured in place through the sides of the hoop using wing nuts or thumb screws and now even magnets. No Thumbscrews.
Non-US Warranty: 30 days parts and labor.

Specifications

Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops

Durkee EZ Frame 9" x 9" Anodized Hoop for Brother Multi Needle Machines PR6 and PR10

Durkee EZ Frame 9" x 9" Anodized Hoop for Multi Needle Machines

Durkee EZ Frame 9" x 9" Hoop for Multi Needle Machines

Our Price: $49.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

One of our most popular “traditional” size plastic hoops is our 9" x 9" hoop. We are proud to introduce the companion size EZ Frame for Multi-Needle machines.

The new 9" x 9" (Sewing Field) Durkee EZ Frame is now available. This size is great for a number of larger projects and designs including Tee Shirts, Tote Bags, Throw Pillows, Monograms, and more!

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Savings - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee EZ Frame SN8x8 Hoop for Single Needle Machines for Brother XV, Babylock Destiny*

Durkee EZ Frame SN8x8 Hoop for Single Needle Machines for Brother XV, Babylock Destiny*


Our Price: $89.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for single-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Embroidery hoops are indispensable tools for working embroidery. They come in a wide range of sizes, styles and materials, and every company has their own favorite brand. Using a hoop also makes it easier to count the threads when worked a counted thread projects.

Before starting the project, the embroidery fabric is placed in the hoop, pulling it taunt and tightening the outer hoop to hold the fabric into position. This taunt fabric base makes it easier to create well-formed stitches that are evenly spaced and uniform in size, as compared to holding the fabric in the hands without a hoop, which can cause the stitch tension to be too tight or too loose. Your choice of size and shape depends entirely on the project and your preference, however, when selecting a hoop, remember that the fabric must completely fill the hoop in order to keep it tight.

When browsing and buying hoops, you will notice that some hoops tighten and loosen with a thumb screw, while others are tension or spring operated or have sections that snap together without tightening.

Hoops that are tension or spring operated are made from a combination of metal and plastic and have a lip. There are also different material that the hoops can be made out of. Wooden hoops, which can be made from pine, hardwood or bamboo do not have a lip. Metal hoops are durable and will last longer than any other type of hoop.

When using an embroidery hoop the hoop is attached to the stands with either a clamp, or secured in place through the sides of the hoop using wing nuts or thumb screws and now even magnets. No Thumbscrews.
Non-US Warranty: 30 days parts and labor.

Specifications

Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops

Durkee EZ Frame SN Single Needle 8in x 12in Hoop Unit for Brother VM5200, VM6200, XE1, XJ1, XP1, XP2, and Babylock

798304391848, 798304395396, Durkee EZ Frame SN Single Needle 8in x 12in Hoop Unit for Brother and Babylock

82413: Durkee EZ Frame SN Single Needle 8in x 12in Hoop

Our Price: $89.95
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Non-US Warranty: 30 days parts and labor.

Specifications

Durkee Single Needle EZ Frames for Baby Lock & Brother Flat Bed Machines


Single Needle EZ Frame Stitching with Durkee Embroidery

Durkee PTA-30300-360 12in (30cm/360mm) Square Tubular Double Height Jacket Back Embroidery Hoop Frame for Happy Embroidery Machines

Durkee, PTA-30300-360, 12, 30, cm, 360, mm, Square, Tubular, Double, Height, Jacket, Back, Embroidery, Hoop, Frame, Happy, Machines


Our Price: $79.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.

Durkee EZ Frame Single Needle 5x7 Floating Frame



Durkee EZ Frame Single Needle 5x7 Floating Frame

Our Price: $79.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines



Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Non-US Warranty: 30 days parts and labor.

Durkee DUREZF4X4 EZ Frame Individual Single Needle 4x4 Floating Frame for Brother and Babylock

798304391671, 798304391794, Durkee DUREZF4X4 EZ Frame Individual Single Needle 4x4 Floating Frame for Brother and Babylock

82408: Durkee DUREZF4X4 EZ Frame Individual Single Needle 4x4 Floating Frame

Our Price: $79.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

If you've been looking for an alternative to traditional hooping with your Single Needle embroidery machine, then you need the Durkee’s new Single Needle EZ Frames! These frames are currently available for several models of Brother and Baby Lock single needle embroidery machines only. (Not for use with Brother Persona PRS100 or Baby Lock Alliance.)

Apply sticky backing to the underside of the EZ Frame. Then attach the fabric on the top of the EZ frame and backing. Attach EZ frame to your machine and then trace your design with your machine making sure the embroidery foot does not hit the frame and you are ready to embroider your design.

Please Note: Make sure that the EZ frame you are purchasing is equal to or smaller than the largest frame available for your machine. EZ frames do not make your embroidery machine sew an embroidery design any larger than the largest hoop available for your machine.





Non-US Warranty: 30 days parts and labor.

Durkee EZ Frame Single Needle 6x6 Floating Frame



Durkee EZ Frame Single Needle 6x6 Floating Frame

Our Price: $79.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines



Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Non-US Warranty: 30 days parts and labor.

Durkee EZ Frame Single Needle 6.5x10.25 Floating Frame



Durkee EZ Frame Single Needle 6.5x10.25 Floating Frame

Our Price: $79.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines



Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Non-US Warranty: 30 days parts and labor.

Durkee Freedom Ring 15cm Spring Load Outer Hoop Only, Happy Embroidery Machines

Durkee Freedom Ring Spring Loaded Outer Hoop Frame Self Adjusting Ring, Your 15cm 150mm Inner Hoop, Happy Embroidery Machines, N0 Thumbscrew NO Magnet


Our Price: $69.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

N0 Thumbscrews? No Magnets? No Problem! The New Freedom Ring uses a tension spring instead of a thumb screw to hold the ring to the hoop.




The new Freedom Ring™ from Durkee will fit as a replacement outer ring for
Allied, Durkee, Happy, Melco, SWF, and Tajima 15CM hoops.

We proudly announce the arrival of the newest product from Durkee Embroidery – the Freedom Ring™. Many people consider “hooping” or “framing” to be one of, if not the, most difficult challenges in embroidery. The Freedom Ring™ will eliminate many of those challenges.

So what makes the Freedom Ring™ different?

  • The inside top edge of the Freedom Ring™ is beveled making it much easier to press the inner ring into the outer Freedom Ring™ when hooping light to medium weight fabrics

  • When hooping thick or heavy weight items, the embroiderer need only begin pulling the Freedom Ring™ apart and it will lock open. After placing the Freedom Ring™ with stabilizer into the embroiderable, insert the inner ring into the Freedom Ring™. When ready, pull the release pin on the Freedom Ring™ and the ring closes securely.

  • The first available size is the 15CM round Freedom Ring™. The Freedom Ring™ will fit as a replacement outer ring for Allied, Durkee, Happy, Melco, SWF, and Tajima 15CM hoops.

    For Light to Medium Projects:
    The Freedom Ring™ has a bevel on the top of the inner surface to let the body of the hoop engage easily.
    Set the stabilizer and fabric over the Freedom Ring™.
    Position the hoop and press down, the spring will expand to keep equal tension over the entire project.
    Recess the Freedom Ring so it is seated securely on the body of the hoop and you are ready to go.

    For Thick or Heavy Projects:
    The Freedom Ring™ has a bevel on the top of the inner surface to let the body of the hoop engage easily.
    Pull the hoop open slowly till the release pin drops into place to hold the ring open.
    Set the stabilizer and fabric over the Freedom Ring™.
    Position the hoop and press down, hold the hoop and pull the pin.
    The spring will retract to keep equal tension over the entire project.
    Recess the Freedom Ring™ so it is seated securely on the body of the hoop and you are ready to go.

    NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee JN-3015cm 11 7/8x6” Embroidery Hoop for Janome MB4 Embroidery Machine

Durkee JN-3015cm 30cm x 15 cm Rectangle (11 7/8“x6”) Embroidery Hoop for Janome MB4 Embroidery Machine


Our Price: $69.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

30cm x 15cm (12″×6″) rectangle frame.

Fits Janome MB-4 machines.

Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.

This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.



MB-4 Embroidery Hoop Help Page Download (.PDF)

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.

Durkee JN-24x24cm 9x9" Square Embroidery Hoop for Janome MB4 Embroidery Macgubes

Durkee JN-2424cm 24 cm x 24 cm Square (9" x 9") Embroidery Hoop for Janome MB4 Embroidery Machine


Our Price: $69.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Hoop picture SHOWS THE HOOP ONLY but are shipped to you WITH THE BRACKETS ATTACHED!

Double height, 24cm x 24cm (9″×9″) square frame.

Fits Janome MB-4 machines.

Common uses: Children’s clothing, larger square designs round hoops cannot accommodate.

This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.

MB-4 Embroidery Hoop Help Page Download (.PDF)

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.

Durkee PR3015 12x6" Hoop & Brackets for Brother PR6, PR1000, PR1050X, Babylock

Durkee, PR3015, 30, 15, cm, 12, 6, Rectangle, Embroidery, Frame, Hoop, Bracket, Brother, PR600, PR620, PR650, Baby, Lock, EMP6, BMP8, BMP9, ENT10, Machine


Our Price: $69.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

30cm x 15cm (12"×6") rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, PR1000 and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached. Grids not available.

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee PR3010 30x10cm (11 7/8 x 4) Rectangle Embroidery Frame Single Hoop with Brackets for Brother PR6-10 Needle, Babylocks

Durkee PR3010 30x10cm (11 7/8" x 4") Rectangle Emb Frame Hoop & Brackets for Brother PR600 PR620 PR650 PR1000, BabyLock EMP6 BMP8 BMP9 ENT10 Machines


Our Price: $69.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

30cm x 10cm (12″×4″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke. Single hoop design for adhesive stabilizers on bottom of hoop to hold project to top of hoop.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, Pr655, PR670E and the Baby Lock EMP6, BMP8, and BMP9 6 needle embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.

Ships with the brackets attached. Grids not available.

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee JN-3010cm 30cm x 10 cm Rectangle (11 7/8"x4") Embroidery Hoop for Janome MB4 Embroidery Machine

Durkee, JN-3010, cm, 30, 10, Rectangle, 11, 7/8, 4, Embroidery, Hoop, Janome, MB4, Machine


Our Price: $69.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

30cm x 10cm (12″×4″) rectangle frame.

Fits Janome MB-4 machines.

Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.

This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.



MB-4 Embroidery Hoop Help Page Download (.PDF)

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.

Durkee 12.5CM x 24CM (5"x9" I.D.) Rectangular Hoop - for Brother PRS 100 Persona and Babylock Alliance BNAL

Durkee PR-12.5x24cm-500 5x9" Rectangle Embroidery Frame Hoop & Brackets for Brother Persona BabyLock Alliance Machines


Our Price: $66.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee's new and exclusive "EZ Turn" oversized solid brass thumbscrews for easier tightening and loosening for those with arthritic hands or carpal tunnel syndrome.

Zinc/Chromate brackets for additional durability and stability.

Durkee's exclusive LIFETIME warranty on all plastic components.

Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves.



NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.

Durkee 5 x 9 Hoop Frame Baby Onesie Tutorial by Mike Johns

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.

Durkee 24x24cm 9x9" Square Hoop for Brother PRS100 Persona and Babylock Alliance BNAL

Durkee PR2424 24cm x 24cm (9"x9") Square Embroidery Frame Hoop & Brackets for Brother Persona PRS100


Our Price: $66.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee PR2424 Most Popular 9x9" Hoop. Also works for 5x7" Designs* With Side Brackets Included for Brother Persona Embroidery Machines using your Arm A, not Arm B. *

NOTE: This item comes in a GREY Color, not available in Black.

Note: Can only use up to the size of your machine's embroidery area, unless you are splitting designs on your embroidery software or Brother's PE Design software first.

Double height, 24cm x 24cm (9″×9″) square frame. Common uses: Children’s clothing, larger square designs that round hoops cannot accommodate.

This hoop fits the Brother Persona and Babylock Alliance Single Needle embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.

Ships with the brackets attached. Grids not available.

*To embroider a design of 5 x 7" you must allow for the design itself, as well as, the sewing head. The next size up for that from Durkee would be our 9” x 9” hoop. As long as that size hoop will fit into the project you are embroidering, that would be your best bet from Durkee. It also happens to be the most popular hoop size we sell to the home embroidery market.

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is great for embroidering children’s clothing and larger square designs that round hoops cannot accommodate.This Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is constructed of high impact plastic making it virtually indestructible. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square has brass inserts for all screws, light texture on the hooping surface, directional guides, and extra height, which aids in holding thicker, harder to hold garments. The adjusting rings' thumb screws on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are large and long to provide more torque and have a wider space for adjustments. The metal clips on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are extra long, aiding in vibration reduction. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square metal clips are zinc plated to provide reduced wear, and they come complete with plastic screws and lock washers.
Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square Advantages:

Directional guides.
Thumb screw is larger and longer than our competitors'.
Wide space thumb screw adjusting.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.



Durkee PR2424SQ Square 9x9" Hoop & Brackets for Brother PR600, PR655, PR1000, PR1050, Babylock* Sews 8x8" or Split Designs up to 4x8"

Durkee, PR2424, 24cm, 9"x9", Square, Embroidery, Frame, Hoop, Brackets, Brother, PR600, PR620, PR650, PR1000, Baby, Lock, EMP6, BMP8, BMP9, ENT10, Machines


Our Price: $66.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee PR2424 Most Popular 9x9" Hoop. Also works for 5x7" Designs* With Side Brackets Included for Brother PR600, PR620, PR650, PR1000, BabyLock EMP6, BMP8, BMP9, ENT10, and BNT10 Embroidery Machines using your Arm A, not Arm B. *

NOTE: This item comes in a GREY Color, not available in Black.

Note: Can only use up to 8x9" designs on Brother PR machines, unless you are splitting designs on your embroidery software or Brother's PE Design software first.

Double height, 24cm x 24cm (9″×9″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: Children’s clothing, larger square designs that round hoops cannot accommodate.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, PR1000, and the PR1000e and the Baby Lock EMP6, BMP8, BMP9 and ENT10 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.

Ships with the brackets attached. Grids not available.

*To embroider a design of 5 x 7" you must allow for the design itself, as well as, the sewing head. The next size up for that from Durkee would be our 9” x 9” hoop. As long as that size hoop will fit into the project you are embroidering, that would be your best bet from Durkee. It also happens to be the most popular hoop size we sell to the home embroidery market.

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is great for embroidering children’s clothing and larger square designs that round hoops cannot accommodate.This Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is constructed of high impact plastic making it virtually indestructible. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square has brass inserts for all screws, light texture on the hooping surface, directional guides, and extra height, which aids in holding thicker, harder to hold garments. The adjusting rings' thumb screws on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are large and long to provide more torque and have a wider space for adjustments. The metal clips on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are extra long, aiding in vibration reduction. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square metal clips are zinc plated to provide reduced wear, and they come complete with plastic screws and lock washers.
Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square Advantages:

Directional guides.
Thumb screw is larger and longer than our competitors'.
Wide space thumb screw adjusting.

Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square works with:
Brother PR600
Brother PR-600C
Brother 600II
Brother 620
Brother 650
Brother PR1000
Brother PR1000e
Babylock EMP6
Babylock BMP8
Babylock BMP9
Babylock ENT10
Tajima Embroidery Machines
Toyota Embroidery Machines
Renaissance Embroidery Machines

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.


Durkee JN--12.5x24cm-360 5x9" Rectangle Embroidery Hoop Frame & Brackets for Shirt Sleeves & Pant Legs on Janome MB4 MB7 Embroidery Machines

Durkee JN--12.5x24cm-360 5x9" Rectangle Embroidery Hoop Frame & Brackets for Shirt Sleeves & Pant Legs on Janome MB4 Melco EP4 Embroidery Machines


Our Price: $66.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee's new and exclusive "EZ Turn" oversized solid brass thumbscrews for easier tightening and loosening for those with arthritic hands or carpal tunnel syndrome.

Zinc/Chromate brackets for additional durability and stability.

Durkee's exclusive LIFETIME warranty on all plastic components.

Use it for: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves




Durkee Embroidery - Hooping Tips from Brent Taylor on Vimeo.



NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.

Durkee PR12.5x24cm 5x9" Hoop Frame & Brackets for Arm A on Brother PR600, PR1000, PR1050X, Babylock 6-10 Needle Embroidery Machines

Durkee PR-12.5x24cm-500 5x9" Rectangle Embroidery Frame Hoop & Brackets for Brother PR600 PR620 PR650 PR1000, BabyLock EMP6 BMP8 BMP9 ENT10 Machines


Our Price: $66.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Durkee's new and exclusive "EZ Turn" oversized solid brass thumbscrews for easier tightening and loosening for those with arthritic hands or carpal tunnel syndrome.

Zinc/Chromate brackets for additional durability and stability.

Durkee's exclusive LIFETIME warranty on all plastic components.

Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves.



NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee PR09RD 3-3/16" Round Hoop Brackets Brother PR600 PR1000 Babylock

Durkee PR09, 9cm, 3.5", (3 3/16"Diameter), Round, Embroidery Frame, Hoop, & Brackets, for Brother PR600, PR620, PR650, PR1000, BabyLock, EMP6, BMP8, BMP9 ,ENT10


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Double height, 9cm (3.5") round frame. Fits Brother PR600/Baby Lock machines. Common uses: cuffs, collars, pockets, hat sides.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached. Grids not available.

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee H-24x24-360 9.4" (240mm/15cm) Square Tubular Embroidery Hoop Frame for Happy Embroidery Machines

Durkee, H-24x24-360, 9.4", 240mm, 15cm, Square, Tubular, Embroidery, Hoop, Frame, Happy, Machines


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.

Durkee JN-18cm Round 6-3/4” Embroidery Hoop with Brackets for Janome MB4 Embroidery Machines

Durkee JN-18cm 18 cm Round (6 3/4” Diameter) Embroidery Hoop for Janome MB4 Embroidery Machine


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Double height, 18cm (6 3/4” Diameter) round frame.

Fits Janome MB-4 machines.

Common uses: larger left chest, small jacket back.

This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.

MB-4 Embroidery Hoop Help Page Download (.PDF)

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.

Durkee JN-15cm Round 5-5/8” Diameter Embroidery Hoop for Janome MB4

Durkee JN-15cm 15 cm Round (5 5/8” Diameter) Embroidery Hoop for Janome MB4 Embroidery Machine


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Double height, 15cm (5 5/8") round frame.

Fits Janome MB-4 machines.

Common uses: most popular left chest size.

This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.


MB-4 Embroidery Hoop Help Page Download (.PDF)

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.

Durkee JN-1515cm Square 6x6 Inch Embroidery Hoop for Janome MB4 Needle Machines

Durkee, JN-1515, cm, 15, Square, 6, Embroidery, Hoop, Janome, MB4, Machine


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Double height, 15cm x 15cm (6″×6″) square frame.

Fits Janome MB-4 machines.

Common uses: tote bags, back packs, small jacket backs.

This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.

MB-4 Embroidery Hoop Help Page Download (.PDF)

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.

Durkee JN-12cm Round 4-3/8” Embroidery Hoop Janome MB4 Embroidery Machines

Durkee JN-12cm, 12 cm Round, (4 3/8” Diameter), Embroidery Hoop, for Janome MB4, Embroidery Machine


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Double height, 12cm (4 3/8") round frame.

Fits Janome MB-4 machines.

Common uses: hat backs, hat sides, smaller left chest.

This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.

MB-4 Embroidery Hoop Help Page Download (.PDF)

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.

Durkee JN-09cm Round 3-3/16“ Diameter Embroidery Hoop for Janome MB4

Durkee JN-09cm 9 cm Round (3 3/16“ Diameter) Embroidery Hoop for Janome MB4 Embroidery Machine


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Double height, 9cm (3.5") round frame.

Fits Janome MB-4 machines.

Common uses: cuffs, collars, pockets, hat sides.

This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.

MB-4 Embroidery Hoop Help Page Download (.PDF)
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.

Durkee PR18RD 7" Round Hoop & Brackets, Brother PR600 PR1000 Babylock

Durkee, PR18, 18cm, 6, 3/4", Diameter, Round, Embroidery, Frame, Hoop, Bracket, Brother, PR600, PR620, PR650, PR1000, Baby, Lock, EMP6, BMP8, BMP9, ENT10


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Double height, 18cm (7") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: larger left chest, small jacket back.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached. Grids not available.

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee H-15x15-360 5.7" (150mm/15cm) Square Tubular Embroidery Hoop Frame for Happy Embroidery Machines




Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.

Durkee PR15RD 5.5" Round Hoop, Brackets, Brother PR600 PR1000 PR1050 Babylock

Durkee, PR15, 15, cm, 5.5, 5, 5/8, Diameter, Round, Embroidery, Frame, Hoop, Bracket, Brother, PR600, PR620, PR650, PR1000, Baby, Lock, EMP6, BMP8, BMP9, ENT10

Durkee PR15RD 5.5" Round Hoop, Brackets, Brother PR600 PR1000 PR1050 Babylock

Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Dimensions 5.5" (5 5/8" Diameter), Double height, 15cm (5.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: most popular left chest size.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached. Grids not available.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee PR12RD 4.5" Round Hoop, Brackets, Brother PR600 PR1000 PR1050X, Babylock

Durkee, Embroidery, 12cm, 4.5", 4, 3/8", Diameter, Round, Frame, Hoop, PR650, PR1000, Baby, Lock, EMP6, BMP8, BMP9, ENT10, Machine


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

(4 3/8"Diameter) Double height, 12cm (4.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: hat backs, hat sides, smaller left chest.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached. Grids not available.

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee DFR57 Freedom Ring 5x7" Outer Spring Hoop Brother PR6-PR1000 Babylock

Durkee, Freedom Ring, 5x7", Outer Spring Hoop, Brother, PR6-PR1000, Babylock


Our Price: $49.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

No Thumbscrews, No Magnets, No Problems! *You must have a existing Brother 5x7" Inner Hoop or order one below For Brother Baby Lock 6-10 needle machines, PR600, PR620, PR650, PR655, PR1000, Babylock BMP, EMP, ENT10, BNT1. These machines already came with a 4x4" hoop set, so you should not need to order an extra one.

A powerful, self-adjusting extension spring provides equal tension every time you hoop. A self-adjusting replacement outer hoop ring for your current Baby Lock or Brother 5” x 7” Hoop. Reduces, and often eliminates hoop burn caused by over tightening a thumbscrew. Elimination of the thumbscrew means no more wasted time adjusting the hoop for the fabric weight. No thumbscrew means less painful hooping for those with carpal tunnel syndrome or arthritic hands.
Non-US Warranty: 30 days parts and labor.

Specifications

We will be introducing the new Freedom Ring hoop from Durkee Enterprises and will demo how this new spring loaded works and how simple your embroidery sewing is going to improve.

Durkee 1.5"x4" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 1.5"x4", 1 1/2 x 4, EZ, Tubular, Hoop, 3/16", Aluminum, Frame, for, Brother, PR6, PR1000


Our Price: $49.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 8"x8" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multi needle EZ Frames

Durkee 8"x8" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multi needle EZ Frames

85237: Durkee 8"x8" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multi needle EZ Frames

Our Price: $54.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 12x4" Optional Hoop for use with 7in1 Tubular EZ Frames, Heavy Duty 3/16" Aluminum for Brother Babyloci PR6 to PR10 Needle Embroidery Machines*

Durkee, ez, frames, 7, seven, in, one, 1, brother, pr6-pr1000, embroidery, dehoop

Durkee 12x4" Hoop for 7in1 Tubular EZ Frames Set on Brother PR6-PR1000

Our Price: $54.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Made of Heavy Duty Aluminum. Connects to the Durkee EZ Frame set, not a stand alone product.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Durkee 3"x8"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 4"x12", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, for, Brother, PR6, PR1000


Our Price: $54.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee Freedom Ring 4X4" Outer Spring Hoop* Brother PR6-PR1000 Babylock

Durkee, Freedom, Ring, 4, Outer, Spring, Hoop, Brother, PR6, PR1000, Baby, lock


Our Price: $49.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

A powerful, self-adjusting extension spring provides equal tension every time you hoop. A self-adjusting replacement outer hoop ring for your current Baby Lock or Brother 4x4" Hoop. Reduces, and often eliminates hoop burn caused by over tightening a thumbscrew. Elimination of the thumbscrew means no more wasted time adjusting the hoop for the fabric weight. No thumbscrew means less painful hooping for those with carpal tunnel syndrome or arthritic hands.

No Thumbscrews, No Magnets, No Problems! *You must have a existing Brother 4x4" Inner Hoop or add one to your order one below for Brother Baby Lock 6-10 needle machines, PR600, PR620, PR650, PR655, PR1000, Babylock BMP, EMP, ENT10, BNT1.
These machines already came with a 4x4" hoop set, so you should not need to order an extra one.

Attention Brother and Baby Lock 6 and 10 needle machine owners. Our new 4 x 4 and 5 x 7 Freedom Rings
Non-US Warranty: 30 days parts and labor.

Specifications

We will be introducing the new Freedom Ring hoop from Durkee Enterprises and will be demo how this new spring loaded works and how simple your embroidery sewing is going to improve.

Durkee Freedom Ring 9x9" Outer Spring Hoop* Brother PR6, PR1000 Babylock

Durkee, Freedom Ring, 9x9", Outer Spring Hoop, for Brother, PR6-PR1000, Babylock


Our Price: $49.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

A powerful, self-adjusting extension spring provides equal tension every time you hoop. A self-adjusting replacement outer hoop ring. Reduces, and often eliminates hoop burn caused by over tightening a thumbscrew. Elimination of the thumbscrew means no more wasted time adjusting the hoop for the fabric weight. No thumbscrew means less painful hooping for those with carpal tunnel syndrome or arthritic hands.

No Thumbscrews, No Magnets, No Problems! *You must have a existing Durkee 9x9" Inner Hoop or add one below to your order for Brother Baby Lock 6-10 needle machines, PR600, PR620, PR650, PR655, PR1000, Babylock BMP, EMP, ENT10, BNT1

24x24cm, or 240x240mm Freedom Ring is Here!

From the time we first introduced our patented self-adjusting, self-tensioning Freedom Ring in March of 2013, the overwhelming question has been, "When are you going to have the 9 x 9 Freedom Ring?"

The 24cm x 24cm (9 x 9") Freedom Ring (FR) has arrived! Without a doubt, this has been the most highly anticipated product from Durkee to date. While the 9 x 9 has always been our most popular square fill-in-the-blank size hoop for all machines, it is BY FAR our best hoop for the Brother and Baby Lock 6 & 10 needle machines.

Currently Have A 9 x9 Durkee Hoop?
If you currently have a 9 x 9 Durkee Hoop, the Freedom Outer Ring is all you need.

Don't Have A 9 x9 Durkee Hoop?
If you do not currently have a Durkee 9 x 9 (24cm x 24cm) hoop you can order under Recommended Accessories below.
Non-US Warranty: 30 days parts and labor.

Specifications

We will be introducing the new Freedom Ring hoop from Durkee Enterprises and will be demo how this new spring loaded works and how simple your embroidery sewing is going to improve.

Durkee 7"x5"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 4"x12", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, for, Brother, PR6, PR1000


Our Price: $54.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 5"x8" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 5"x8", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, Brother, PR6, PR1000


Our Price: $54.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 5"x8" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 6"x6" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 6"x6", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, for, Brother, PR6, PR1000


Our Price: $54.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 6"x6" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 7"x7" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 7"x7", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, for, Brother, PR6, PR1000


Our Price: $54.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 7"x7" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 8x12in x 3/16in Thick Aluminum Hoop Frame on of many Tubular EZ Flat Frames for Brother and Babylock PR6 to PR10 Needle Embroidery Machines

Durkee, ez, frames, 7, seven, in, one, 1, brother, pr6-pr1000, embroidery, dehoop, Durkee 8x12in x 3/16in Thick Aluminum Screw On Hoop to go along with other Durkee Tubular EZ Flat Frames for Brother PR600 to PR10 Embroidery Machines

65751: Durkee 8x12in x 3/16in Thick Aluminum Screw On Hoop to go along with other Durkee Tubular EZ Flat Frames for Brother PR600 to PR10 Embroidery Machines

Our Price: $59.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 4"x12" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 4"x12", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, for, Brother, PR6, PR1000


Our Price: $54.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 15cmx15cm (6"x6" I.D.) Square Hoop-for Brother PRS100 Persona and BL Alliance

Durkee Embroidery 15cm x 15cm (6"x6") Square Frame for Brother Persona PRS100 Baby Lock Alliance Series Machines


Our Price: $42.00
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Double height, 15cm x 15cm square frame. Fits Brother Persona, and Babylock Alliance Series machines. Common uses: tote bags, back packs, small jacket backs.

This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached. Grids not available.

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.

Durkee PR1515cmSQ 6x6 Hoop Frame +Brackets for Brother PR600 PR620 PR650 PR655 PR670 PR1000 PR1050X PR1055 +Babylock Multi Needle Embroidery Machines

Durkee, Embroidery, 15, cm, 6, Square, Frame, Brother, PR600, Baby, Lock, Series, Machines


Our Price: $42.00
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Double height, 15cm x 15cm (6″×6″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: tote bags, back packs, small jacket backs.

This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.

Ships with the brackets attached. Grids not available.

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications




DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 4"x4" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 4", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, Brother, PR6, PR1000


Our Price: $49.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 4"x4" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 2.5"x4" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 4"x12", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, for, Brother, PR6, PR1000


Our Price: $49.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 3"x4"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 4"x12", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, for, Brother, PR6, PR1000


Our Price: $49.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 5"x4"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 4"x12", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, for, Brother, PR6, PR1000


Our Price: $49.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 2"x4"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 4"x12", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, for, Brother, PR6, PR1000


Our Price: $49.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee 5"x5" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames

Durkee, 5"x5", EZ, Tubular, Hoop, 3/16", Aluminum, Frame, for, Brother, PR6, PR1000


Our Price: $54.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

This video show cases all 7 hoops in the combo available here. This product is the 5"x5" frame only.

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.

Specifications

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


 


Project #1 Baby Onesies



Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.


Project #2 Embroidered Stuffed Animals


Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.


Project #3 Christmas Stockings


Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.


Project #4 L/R Chest Embroidery


Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

Durkee EZ Frame Radius Anodized Part -for Existing Multi-Needle EZ Frames



Durkee EZ Frame Radius Anodized Part

Our Price: $54.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

Made of Heavy Duty Aluminum. Connects to the Durkee EZ Frame set, not a stand alone product.
Non-US Warranty: 30 days parts and labor.

SewTech SAMDRIVER2 Multi Purpose Screwdriver Set for Brother Babylock for Needle Clamp Screw, Presser Foot Screw, Needle Plate Screws, Hoop Screws

Brother SAMDRIVER1, SAMDRIVER2, Sew Tech SAD sadriver, Multi Purpose, Screwdrivers, Needle, Plate, Feet, Hoops

59996: SewTech SAMDRIVER2 Screwdriver Brother Babylock Needle Plate Foot Hoop

Our Price: $9.99
Prices are subject to change, and only current prices will be honored.

Availability: OUT OF STOCK
Condition: New In Box

Features

This Sew Tech copy of Brother SAMDRIVER1 Multi Purpose Embroidery Hoop Screwdriver is one tool you need to have in your sewing room. The Brother SAMDRIVER1 Multi Purpose Embroidery Hoop Screwdriver allows you to tighten embroidery hoop screws, needle plate screws and needle plate screws. The Sew Tech Brother SAMDRIVER1 Multi Purpose Embroidery Hoop Screwdriver makes a great gift to your sewing buddy.

Model: SADRIVER (SAMDRIVER1)

Tighten with ease, even in tight places! This innovative multi-function tool has three different slotted screw tips, designed for four functions: A screw tip for tightening frames and hoops, a needle plate screw tip, and a combination needle/presser foot screw tip.

This convenient, useful, multi-function tool is the perfect addition to your sewing room, and can be used on all of your Brother sewing, embroidery and combo machines and Brother embroidery frames. No more searching for dimes, no more struggling to get your fingers under the needle!

Flat blades work with all brands of sewing and embroidery machines, embroidery hoops and frames.







Non-US Warranty: 30 days parts and labor.

Specifications

For Use With Any Sewing or Embroidery Machine Including:
Designio DZ820E, HE1, HE-240, LB6770 PRW, LB6800PRW, Innov-is NQ1400E, Innov-is NQ3500D, Innov-ís 1000, Innov-ís 1200, Innov-ís 1250D, Innov-ís 1500D, Innov-ís 2500D, Innov-ís 2800D, Duetta® 4500D, Duetta® 2 4750D, Isodore® Innov-ís 5000, Quattro® NV6000D, Quattro® 2 6700D, Quattro® 3 Trilogy Limited Edition Innov-ís 6750D, Innov-ís 900D, Innov-ís 950D, Innov-is 990D, PE500, PE540D, PE700II, PE770, PE780D, Entrepreneur® Pro PR1000, Entrepreneur® Pro PR1000e, PR-600, PR600II, PR620, Entrepreneur® PR650, Entrepreneur® PR650e, Entrepreneur® PR655, Simplicity SB7050E, Simplicity SB7500, SE350, SE400, SE425, DreamMaker™ XE VE2200, DreamCreator™XE VM5100, DreamWeaver™ XE VM6200D, The Dream Machine XV8500D

Durkee Hooping Station HP1/HP2PKGPackage Includes one (1) each Hooping Pro 1 (Full Station) and Hooping Pro 2 (Project Station)

Durkee Hooping Station  HP1/HP2PKGPackage Includes one (1) each Hooping Pro 1 (Full Station) and Hooping Pro 2 (Project Station)

Durkee Hooping Station HP1/HP2PKG Package

Our Price: $695.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Non-US Warranty: 30 days parts and labor.

Durkee EZ Frame Single Needle 7x12 Floating Frame



Durkee EZ Frame Single Needle 7x12 Floating Frame

Our Price: $79.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines



Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Non-US Warranty: 30 days parts and labor.

Durkee EZ Frame Single Needle 9.5x14 Floating Frame



Durkee EZ Frame Single Needle 9.5x14 Floating Frame

Our Price: $89.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines



Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Non-US Warranty: 30 days parts and labor.

Durkee Hooping Station HPInfant PkgPackage Includes: one (1) each: Hooping Pro 2 (Project Station) Plus HP Infant Board

Durkee Hooping Station  HPInfant PkgPackage Includes: one (1) each: Hooping Pro 2 (Project Station) Plus HP Infant Board

Durkee Hooping Station HPInfant Package

Our Price: $335.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Non-US Warranty: 30 days parts and labor.

Durkee Hooping Station HPJunior PkgPackage Includes: one (1) HP2 (Project Station) plus HP Junior Board

Durkee Hooping Station  HPJunior PkgPackage Includes: one (1) HP2 (Project Station)  plus HP Junior Board

Durkee Hooping Station HPJunior Package

Our Price: $365.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Non-US Warranty: 30 days parts and labor.

Durkee Hooping Station HPPlus PkgPackage Includes one (1) each: HP2 (Project Station) and a HP Plus Board

Durkee Hooping Station  HPPlus PkgPackage Includes one (1) each: HP2 (Project Station) and a HP Plus Board

Durkee Hooping Station HPPlus Pkg Package

Our Price: $375.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Non-US Warranty: 30 days parts and labor.

Durkee Hooping Station HPPlusAllBoardsPkgPackage Includes one (1) each: HP2 (Project Station), HP Infant Board, HP Junior Board, HP Plus Board

Durkee Hooping Station  HPPlusAllBoardsPkgPackage Includes one (1) each: HP2 (Project Station), HP Infant Board, HP Junior Board, HP Plus Board

Durkee Hooping Station HPPlusAllBoardsPkg Package

Our Price: $615.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Non-US Warranty: 30 days parts and labor.
Copyright © 1995-2021 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.