This heavy-duty commercial model Jiffy Steamer holds up to 4 quarts of regular tap water and heats up to 200 degrees F in minutes. Features dual thermostats to produce steam in seconds, corrosion-proof stainless steel boiler tank to eliminate water line clogging, and safety wiring that temporarily turns the unit off when it becomes dry. The super flexible 67" hose makes it easy and comfortable to use, and the sight gauge allows for a quick, visual check on water levels. 4 attached wheels, 62" tall hanger rod included. The "stone" color base measures 18x10x10", uses a standard electrical outlet, and has a power on/off light.
Can leave on preheat setting all day and use intermittently in minutes without going through the entire heat cycle each time you use it.
The J-4000 is a commercial unit and not recommended for home use, because of the 15 minute preheat time.
The home model J-2000 produces steam in less than 2 minutes and will steam for an hour and a half while offering a on and off switch, once turned off, it will produce steam in less than 2 minutes again.
We have many customers buy the J-4000, thinking “commercial” is better, when in fact all of our steamers are professional grade. The J-4000 is intended to be used for commercial setting for several hours a day.
Jiffy Service Department: "The J4000 unit takes about 15 minutes to start up and get going with 1 gallon of water. The J2000 is steaming about 2 minutes. The difference is that the larger J4000 you are heating a full gallon of water before it starts and the J2000 is only heating a few ounces to produce steam. The J4000 is for large shop use for all day and the J2000 is for a half a day or less and can be cut on and off, and used on a moments notice."
The metal head with wooden handle will offer more durability and the head will provide more heat closer to the garment while steaming. The plastic head and handle is cooler to the touch and lighter weight to use. The steamhead options is truly a customer preference.
- 1500 Watts Of Steam Power
- Dual Thermostats
- Brass Heating Elements
- Preheat time approximately 15 minutes and produces steam within 2 minutes once at preheat temperature
- Auto-Off If Out Of Water
- Stainless Steel Boiler Tank
- Cast Aluminum Housing
- Garment & Hose Hanger
- Professional Steamer On Casters
- Weighs Only 26 Pounds
- On/Off Switch
- Holds 1 gallon of water and will steam continuously for 2 hours
- The J-4000 series has a water level sight gauge that shows the water level.
Jiffy Steamer World Power Supply Configurations
Jiffy Owner's Manual
Find more about Jiffy Repair Services
- US Warranty 3 Year Warranty
- Non-US Warranty: 30 days parts and labor
Please refer to the "How to Steam Guide" (.pdf) for further information on how to use your steamer.
Jiffy World Power Supply Voltage Configurations (click to enlarge)
Jiffy J4000 Commercial Garment Fabric & Upholstery Steamer, 5 Minute Demonstration:
- J-4000 base unit
- Steam head and hose attachment
- Rod set
- Assembly wrench
- Owner's manual
1. Made in the USA.
2. Our products are the originals.
3. We invented the product and process.
4. We are the industry leader.
5. Oldest (since 1940) and largest (currently 1,000 dealers serving over 45 countries) garment steamer manufacturer in the world.
6. 3-Year Warranty on all Jiffy Steamer products. This is the best in the industry and represents our confidence in the products we manufacture.
7. 24 / 7 / 365 ordering capabilities through www.allbrands.com
8. Next day delivery option available (even on Saturday in some zip codes).
9. A warm, friendly, knowledgeable and LIVE voice every time you call during business hours. As a matter of fact, the customer service representative that you speak with has completed a 2 week training course and knows how to build and repair Jiffy Steamers…they can help you.
10. Should your unit require repair, we have a 24 hour repair turn-around time…your steamer will be repaired and back on a UPS truck within 24 hours after your approval of the repair quote.
11. All our steamers are fully customizable with a host of options for steam head / hose attachments, cord plugs and voltage.
12. Each Jiffy Steamer is handcrafted in our Union City, Tennessee factory. We never compromise on quality, materials or workmanship. Take a look “under the hood” of our products. You will find stainless steel, brass, copper, incoloy and silicone braided color-coded wiring. This quality is simply not found in competitor’s products.
13. We have an ultra-low products return percentage. Every unit is 100% tested and steamed before it leaves our assembly line.
14. Our staff is experienced…more than any other garment steamer manufacturer in the world with over 603 years (and counting) of manufacturing knowledge.
15. Our staff is dedicated…with an average tenure of 17 years employment at our company for our associates.
16. It takes, on average, 52 unique stages to build a Jiffy Steamer product within our factory. Care is taken at every step.
17. Use what the professionals use…Jiffy Steamers…our products can be found in over 95% of the chain retail clothing stores.
18. We build commercial-grade units across all of our product lines…travel, residential and industrial categories.
19. A new Jiffy Steamer is put into use, somewhere around the globe, every 6.57 minutes…you are in good company!
20. Not everyone can iron, but anyone can steam! The process is easily learned and mastered.
21. Our products are protected by multiple patents and trademarks.
A Closer Look into Garment Care
Steaming vs. Ironing
Your clothes are an investment. Don't you want to apply the safest, gentlest method for removing wrinkles?
To determine which method of removing wrinkles is the better option for fabric care, steaming and ironing were put to the test.
- Two identical 6" x 6" squares of black wool were purchased from a local fabric store.
- We steamed sample "A" for 1 minute with a Model J-2000 Jiffy ® Steamer.
- Sample "B" was ironed for 1 minute, on the proper heat setting, with a top-of-the-line residential iron.
- We then bagged, labeled, and submitted both samples to MVA Scientific Consultants in Norcross, Georgia for detailed magnification.
The Scanned Electron Microscope (SEM) images show any damage that may have occurred.
|Sample A - Steamed||Sample A - Steamed|
|Sample B - Ironed||Sample B - Ironed|
The fibers in sample "A" are in near perfect condition due to the gentle nature of steam. However, the fibers in sample "B" are clearly distorted. You can easily recognize the damaged fibers caused by just one application of the iron's hot sole plate.
Unlike ironing, steam actually relaxes the fibers rather than crushing them.
Now that you have a closer look into garment care, use what the professionals use…
a JIFFY ® STEAMER!
Steam Kills Dust Mites
Do you or family members suffer from allergies?
A 2003 Environmental Protection Agency report stated that childhood asthma rates are doubling. The EPA report is the agency’s second comprehensive look at the environmental hazards to children’s health. The finding showed the percentage of children getting asthma has doubled in two decades, rising from 3.6 percent in 1980 to 8.7 percent, or 6.3 million children by 2001. The exact cause for the increase is unknown but researchers state a number of factors have been studied. Those range from exposure to dust mites, cockroaches and pesticides to tobacco smoke, ozone and soot. EPA officials are examining the role of indoor air pollutants, such as dust mites, especially since there have been modest improvements since 1990 in lessening exposure to outdoor air pollutants. The reduction of indoor factors will be the key to reversing this trend. 1
Dust Mites are microscopic creatures related to the spider family. They are invisible to the human eye and are about 0.3mm in length. They live on human skin flakes. They are most prevalent in the bedroom where millions can exist in your mattress, boxspring, pillows and comforters. They are also found in upholstered furniture, carpeting and other fabric items. Dust mites produce 20 or more fecal pellets per day, which is the primary allergen to humans. We inhale these allergens while sleeping and during periods when these particles become airborne such as when vacuuming and disturbing the infested fabrics.
It has been proven that dust mites and their allergen Der p1 are a major factor in allergic reactions. A key to controlling allergic reactions is controlling the dust mite population in your home. Lower mite populations lower the amount of mite allergen, Der p1. Other clinical studies have revealed that avoidance of dust mite allergens in early childhood can prevent the onset of asthma in adults. A study as reported in the Journal of Clinical and Experimental Allergy tested the feasibility and effectiveness of using a portable, domestic steamer for the control of dust mites, its effects on mite populations and concentration of the allergen Der p1.2
A domestic steamer was used to treat carpet squares that were seeded with a known number of dust mites. The number of live mites was monitored for 4 months and in 8 test squares and 8 control squares. Measurement of mite populations and allergen levels were taken before and after steaming with a domestic steamer.
The results showed two significant findings. No live mites were found in any of the eight steam-treated carpet squares. In contrast, the numbers of live mites extracted from the eight-control squares rose from a mean of 11 on day 3 to 185 four months later. The fact that no live mites were found in any of the eight steam-treated carpet squares at any time during the study shows that steaming is a highly efficient method of killing house dust mites. More significant for allergy sufferers is the measurement of the allergen Der p1. There was no difference in the concentration of Der p1 in dust samples of untreated carpets, but in those which had been steam cleaned there was an average 87% fall in the concentration of Der p1.
The study concluded with:
"Steaming requires nothing more than water and heat and therefore is non-polluting compared with mite eradication methods that require the use of detergents and other chemical agents. Furthermore, the design of domestic steamers, [such as the Jiffy® Steamer], renders it safe for domestic use as long as the operating instructions are followed. In addition, we observed no damage, or shrinkage of the fabric, nor discoloration and the carpet dried within a half-hour of treatment. There is no indication of prolonged retention of residual moisture, as with wet-vacuum cleaning which may promote mite population growth.
Finally, steaming as reported herein is the only method of house dust mite control that combines effective killing of mites and substantial reduction in allergen concentrations within a single system. These factors, taken together, render domestic steamers, [such as the Jiffy® Steamer], especially suitable for the management of dust mites and their allergens in the homes of allergy sufferers."
For additional information and reading on maintaining a healthy home, you may want to consider a book by Jeffrey C. May titled "My House Is Killing Me! The Home Guide for Families with Allergies and Asthma".3
1 As reported by Associated Press February 26, 2003
2 MJ Coloff, C Taylor, TG Merrett. The use of domestic steam cleaning for the control of house dust mites. Clinical and Experimental Allergy 1995 25: 1061-6.
3 May, Jeffrey C(2001). My House is Killing Me! The Home Guide for Families with Allergies and Asthma. John Hopkins University Press.
Penny, you may have to hold the hose up higher in the air to prevent condensation from forming and coming out the steam head. Also make sure the hose coupling at the base is tight and not leaking. I am forwarding your communications to Jiffy for their further recommendations. Thanks. John Douthat, owner and tech.
Hello! Take your hose off and rinse it out just in case something has gotten into your hose. Empty the unit and start again with fresh water. This should help the problem. If you have any further questions, please call one of our technicians at 800-525-4339. Jiffy
How do I prevent leaking?
The steamer must be used in the vertical position only. If the hose is being held correctly and steaming and item in the vertical position, there should be no water droplets. However, as you steam towards the lower portion of a garment, you will need to extend the hose periodically to allow any condensation to go back down from the hose into the steamer base. This will also keep the hose from spitting water as well. When the head is placed in the rod set hook, be sure that the holes are faced upward when not in use.
The steamer I ordered doesn't put out the amount of steam I expected. I have a drapery workroom and I can't use it on the table because of the water spitting. Is there a steamer that will work horizontally and vertically? I have a Reliable boiler iron and am looking for that kind of steam. Can I return this steamer and get something better? Beverly
Jiffy Steamer is intended to be used upright so the steam can rise out of the hose. The steamer, if used horizontally will spit water out. The Jiffy also provides a continuous soft flow of steam, when being used correctly. Jiffy
We always buy our jiffy steamers from you and have always been satisfied with the products and service-thank you.
A pleasure to deal with, Great Transaction and fast shipping. Highly recommended!
I am an Trim and Upholstery Teacher and I have given your name to my students to buy the Jiffy 4000 from you. Your company got me my steamer quickly and the product is just as it was stated on line Thank you I will definitely buy from you again and tell others about you.
Beverly, New Hampshire
Just love the steamer. Wish the rod and hose were longer...I'm going to order the pole extension and the longer hose. Just to let you know that this is not a complaint it's just my preference. Wouldn't think twice about ordering from you again.
There were so many different choices of steamers I was grateful to get to speak with customer service. They were able to help select the best steamer for my needs. Thank you.
Good doing business with you! Thanks
Love this one and received it faster that I would have imagined possible.
Great price,delivery was fast and well packaged I am very happy with my steamer, thank you
Great experoence. Thank you.
Absolutely super transaction. Item was exactly as described and arrived in a timely manner. Couldn't be any happier. Will recommend to anyone looking for this type of merchandise - THANKS
Thanks will continue to do business with Allbrands. Great seervice !! Of course I will never be totally happy with the price LOL
Jeffery, North Carolina
Product was shipped super fast!
easily found exactly what we were looking for with reasonable expidited shipping charges (we needed a replacement in a hurry!) thank you
Ann, Atlanta, GA
First time buyer on your site, but will buy again, and have even recommended it to others.
Linda, Kennesaw, GA
Got it fasted than expected. And the product works great!
Elaine, Haverford, PA
The steamer we purchased arrived very quickly and works like a dream. We would definitely shop with you again.
Mark, Mahopac, NY
All in all, a better selection than the other web sites I visited, and the price was better than the rest. Ordering was easy and delivery was perfect. Thanks for a quality product at a good price. My wife loves it! A pleasure doing business with you. Thank you again.
Phyllis, Kansas City, MO
Your phone person(s) was excellent, and your service could not be better. I'm happy to have found you. I will definitely use you again.
I am truly satified. I love my new steamer. And your service was truly great. Donna
Thelma T., Weare, NH
Great experience and ease of purchase. Shipping was prompt. Will buy from you again!
I LOVE MYJIFFY STEAMER. THE CUSTOMER SERVICE AND SPEED OF SHIPPING EXCEEDED MY EXPECTATATION. THANK YOU, FANNIE MAE
Donn G., Carlisle, PA
Impressive. I picked you because of the price. I will buy again because of the service!
Michael F., Danville, KY
Enjoyed doing business with your company. Hope to do more business in the future.
James H., Lacey, WA
Very good service would order from again.
Arnold P., Hermosa Beach, CA
Great price; no tax and shipping costs. Beat all the competition. Couldn't pass it up.
Anthony M., Milwaukee, WI
I am very satisfied with allbrands in all respects! Thank you for an excellent shopping experience.
Sharon M., South Pasadena, CA
The price was competitive and the speed of shipping,as I remember, was pretty fast and it was securely packaged.
Rex B., Nampa, ID
We purchased this same item from you a few years ago. The price was fair and delivery was fast. We will order again.
Harold L, Boynton Beach FLA
It appears that your company has worked hard to: - Provide quality products - Become a very price competative dealership - Take an active interest in your customers satisfaction - Realize and implement the importance of good leadership - Understand how to leverage the internet for great e-commerce - Take seriously an all but forgotten maxim..."customer satisfaction"
Bradley S, Dover PA
Thanks for a great product. Shipping was very fast. Your quality is very good and thanks for still making it in the USA. Brad
Jiffy Steamer Company,
Please note that this is our commercial model…it takes 15 minutes to reach PREHEAT, then when you are ready to STEAM, simply move the switch to STEAM and you will have warm, moist steam in 2 minutes or less. Jiffy Steamer Company