Bundle & Save
Get additional savings when you purchase any of these items along with this product.
Organ LWx6T 29-34 Curve Flat Shank 50 Blindstitch Needles in 6 Sizes (+$59.99, You Save $20.00)
- Up to 1200 Stitches per Minute
- 110 volts, 250 Watts
- Cylinder Arm and Swing-Away Table
- Skip Stitch and Knee Lifter
- 3.2 to 6.5mm Stitch Length
- 7mm Presser Foot Height
- All-Metal Portable
- Portable Home Use Sewing Machines for Apparel Tailoring and Alterations only
- Blind Stitch Machine
- US Warranty 30 Days labor on defects in materials and workmanship.
- Extended US Warranty: Extended Warranty Available
- Non-US Warranty: 30 days parts and labor
Click HERE for Longer Generic Instruction Book Operating Manual User Guide for Table Top Portable Blindstitch Sewing Machines
Blind Hemmer Ending Stitch Techniques I show how I now end my blind hemmer stitches. In the past I always used the old technique of raising the needle to its' highest position and releasing the pressure foot and jerking the fabric back quickly to break the thread. This led to size 10 needles skipping stitches sooner than I thought they should. I contacted the mfg of my machine and they told me to use the technique I show in this video. Since I've gone to it my #10 needles are lasting much longer. :) The machine shown is an Industrial Consew made in Japan back in the 1970s. Kevin Sews Published on Jul 2, 2014
- Instruction Book
- Foot Control
- Extra Needles
- Knee Lever
- Cone Thread Stand
- Comes Threaded
- Allen Wrench
When I pull the stitching out, several stitches unravel along with it. Is there a way to tack the stitches to prevent unraveling?
Jenna, there are several ways of securing a blind hem stitch at the end of a seam. The easiest way is to sew over and beyond the end of a seam, especially if hemming a tubular item like pants. When you sew over previous stitching it helps to lock the stitches in.
Before you remove fabric from the end of the machine feeder, turn the hand wheel clockwise to swing the needle all the way to the left position in the needle channel which will help secure the thread and stitch in place. Then quickly pull or jerk the fabric hem from behind the feeder which will break the thread and tie off the chain stitch so that it will not continue to unravel. It takes some practice because you may have to use the knee lever or hand wheel to position or release the fabric if it is not already at the end of the feeder.
You can also turn the hand wheel counterclockwise at the end of the seam (like reverse stitching but no formation) just to hide the end stitches, or you can manually weave the unraveled thread back into the chainstitch with a seaming needle.