HOW TO INSTALL YOUR PORTABLE TABLE
INCLUDED WITH TABLE:
8 standard legs, 2 cling rulers
1. Adjust leg height to be 1/4” shorter than machine free arm.
Hint: stand leg up to free arm, adjust accordingly
(for proper fit the Table will be level with the free arm of machine
at the needle).
2. Install legs by placing Table upside down on a firm surface.
Protect Table top with a soft towel. Push legs all the way onto
black buttons attached to Table. Turn Table upright.
3. Remove any accessory trays surrounding free arm. Slide Table
into place (if legs not attached or not at right height, Table may
not slide into place correctly).
4. Install support/suction leg (when supplied) by attaching the
suction cup into the top of the leg, adjust height and place
REMOVING LEGS (TRANSPORTATION & STORAGE):
Remove legs by placing Table upside down on a firm,
protected surface and gently wiggle legs back and forth.
DO NOT TWIST LEGS!
PLEASE DO NOT PICK TABLE UP BY LEGS
PLEASE DO NOT UNSCREW BUTTONS FROM TABLE
Scan code at left to find instructional videos on our Sew Steady products
TROUBLE SHOOTING FIT ISSUES
Not fitting around free arm
Accessory tray still
- OR -
Legs not attached or at correct height
Remove accessory tray
- OR -
Attach legs/adjust height (see table
Table still not fitting correctly
Note: if Table is not fitting properly,
please call for assistance or
return authorization: 800-837-3261
*Sew Steady Free Motion Table 32x24" for Home Sewing Machines. The longer your machine arm, the closer to the end of the table the needle will be. If your machine arm is too short, you may need to stand up to reach the needle comfortably with your arms and hands. We recommend a smaller table if the needle is over 10" from the end of of the table.
Note: This table was designed for machines with free arms longer than 13” overall length (not needle to neck) If you free arm is shorter than that this size of table may not be ideal as the needle will be more than 10” from the front of the table.
CAUTION: Do not place anything hot on acrylic. Never have sewing machine arm lower than cabinet insert. Do not stand on, lean on, or apply unnecessary pressure, outside of standard sewing use, to acrylic.
WARNING: Do not use harsh solvents such as Windex, rubbing alcohol, paint thinner, lacquer thinner, acetone, turpentine, or any petroleum based substances as they can cause acrylic to weaken and crack. If harsh solvents are used on acrylic the warranty is void.
RETURNS: Contact the original place of purchase for return policy. Product must be unused, with all components and original
packaging for any return. Damaged items must be reported and have picture proof submitted within 15 business days of delivery date for no charge replacements.
Dream World Northwest warrants this product, to the original
purchaser, for 1 year from purchase date to be free of defects in material and workmanship. This does not include cracks, scratches or dents due to dropping, bumping, banging, stepping on, or
normal use. If harsh, non-approved cleaning agents are used on acrylic, warranty is void. Removing or over tightening screws and nuts from table top voids warranty. Marking on product with
permanent markers may void warranty. Defective product may be sent (freight prepaid) to Service Department, Dream World Northwest, 745 Powers St. Eugene OR 97402 for evaluation of free replacement or repair at our option. Remedy does not include: cost of inconvenience, damage due to product failure, transportation damages, misuse, abuse, accidental or the like, or commercial use. In no event shall Dream World Northwest be liable for incidental or consequential damages. Some states do not allow limitation on how long an implied warranty lasts, or allow the exclusion or
limitation of incidental or consequential damages, so above
limitations or exclusions may not apply to you.
CALL FOR RETURN AUTHORIZATION
KEEP DATED SALES RECEIPT FOR WARRANTY
ACRYLIC TABLE CARE
Just set up my insert for sewing machine cabinet for my Bernina - it fits perfectly - Thank you! Love it! Have not opened the free motion extension table yet