• 4” Scissors: Large rings provide comfortable finger and thumb access for making small precise cuts. High grade German stainless steel blades with razor sharp edges perform flawlessly.
  
  


• 6” Scissors: Great for your mid-to-large cutting needs for sewing, quilting and embroidery. These 6” sharp point trimming scissors are made of high grade German stainless steel blades with razor sharp edges.
  
  
  


• Sharp Metal Pointer: Use the ultra-sharp point stiletto instead of your finger for dozens of sewing/embroidery tasks such as appliquéing in the hoop, joining lace, machine ribbon embroidery, pressing small items and guiding fabric under the needle. When stored, the pointy tip screws into the protective handle and is easily assembled for use.
  
  


• Thread Snips: These super lightweight and easy to use scissors are ideal for trimming loose threads or jump stitches on hooped embroidery. The narrow curved blade makes it easy to trim hard to reach or tight areas that standard scissors are too large to handle. Plus the spring-like action makes these scissors pain-free for anyone with arthritis. Convenient for left or right handed users.
  
  


• Applique Scissors: Protect your base fabric when trimming appliqué. Slide the ½” wide duck bill between the appliqué fabric and base fabric to make clean precise cuts.
  
  


• Opposable Tweezers: Unlike traditional tweezers that can strain the fingers with prolonged use, these tweezers are self-closing and feature an angled tip. Hold items securely then squeeze the handles to release the items. These reverse tweezers are ideal for use with hard to grasp items like beads, crystals and other small embellishments.
  
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

• T-shirts and Sweatshirts:
  For left chest embroidery, simply flip the template.
  
  
• Placket Shirts:
  Place the top left or right corner in the middle of the top button.
  
  Place a target sticker or mark the upper and lower placement notches to make to easy to keep the design straight in the hoop.
  
  
• No more guesswork!
  Design placement on left and right chest embroidery is accurate every time!
  
  
• Quick & Easy!
  Simply select the garment size and place a Target Sticker along the alignment marks.
  
  
• Consistent and Accurate Results Every Time!
  Stitch a stack of shirts quickly and easily!
  
  
  
  
  
  Little Helper Align Placement Ruler:
  
  This clever little tool delivers big results for left chest pocket embroidery
  This is a fast and simple tool for positioning embroidery designs above pockets. Place the ‘Lil Helper’s zero mark on the center top of the pocket. The pocket’s outside edges will hit the ruler in equal increments on both sides. Align a target sticker with the correct height marking for the center of the design. Determine the design’s center by adding half the design’s height plus the distance from the top of the pocket to the bottom of the design.
  
  
  
  
  Design placement on garments just go easier! Order the Embroiderer's Helper and the Embroiderer's 'Lil Helper.
  
  The Embroiderer's Helper is an easy solution for positioning left and right chest embroidery designs on tees, sweatshirts, and placket shirts. No more guesswork or misaligned designs! Plus, use the Embroiderer's 'Lil Helper for design placement above pockets with confidence!
  
  
  
  
  The Embroiderer's Helper:
  
  Design Placement is Easy!
  The Embroiderer's Helper is an easy solution for positioning left and right chest embroidery designs on tees, sweatshirts, and placket shirts. No more guesswork or misaligned designs! Compatible for shirt sizes from Small to Extra Large.
  
  Ideal for Placket Shirts
  Place the top left or right corner in the middle of the top button. Place a target sticker or mark the upper and lower placement notches to make it easy to keep the design straight in the hoop.
  
  Align the curved button notch on the Embroiderer's Helper with the top button. Place a target sticker or other marking device in the notch that corresponds with the shirt size.
  
  Ideal for T's and Sweatshirts
  Fold the shirt in half. Align the template's curved neckline at the bottom of the shirt's neck ribbing.
  
  To mark the center of the design, place a target sticker or other marking device in the upper notch that corresponds with the shirt size.
  
  If desired, place a second target sticker or other marking device in the next set of notches. Placing a target sticker in both notches ensures the garment stays square while hooping.
  
  The upper Target Sticker marks the center of the embroidery design. The lower Target Sticker can be used to ensure the shirt stays straight during hooping. Use one or both locations, whichever is most helpful to you.
  
  
  
  
  

• 213 lace designs in 5 mini-collections
  
• Plus inclusive link to download the Bella #AW2009 Knit Top pattern with instructions from AngelaWolfPatterns.com

• The Spray Tent is the place to spray patches, appliqués or any items requiring spray adhesive without unwanted overspray.
  
  
• The spray tent pops open when removed from its bag. We recommend placing your items face-down on a layer of paper to avoid excess accumulation of spray adhesive in your tent. After spraying, allow any excess adhesive to dry before storing.
  
  
• We recommend a single fold only for storage – replacing in the original bag can bend the metal stays.
  
  
• *If desired, place a piece of cardboard on the bottom of the tent as a floor.
  
  
  
  
  

• A lesson on the 6 Factors of Monogramming
  
• Embroidery Software 101
  
• Helpful Tidbits and Tricks
  
• Projects
  
• Creative Napkins
  
• Monogrammed Table Linens
  
• Best Seat in the House
  
• Foot Stool
  
• Bathroom Makeover
  
• Bedroom Makeover
  
• Embroidered Faux Suede Desk Accessories
  
• Helpful Tools
  
• Resources
  
• Multi-format Design CD featuring
  
• 3 Font Styles PLUS Accents!
  
  Machine-Embroidered Monograms for the Home has the perfect fonts, frames and accents for you to create a personalized lampshade for a child's room, hallway, den, kitchen or bathroom.
  

• 35 Machine embroidery designs on CD
  
• 15 Pincushion projects
  
• Tips on how to choose the right fibers and how to create your own custom colors
  
• Eileen's tips on how to make the perfect decorative pins!
  
  
  
  
  Embroidery formats include: ART, DST, EXP, HUS, JEF, PCS, PES, SEW, VIP, VP3, XXX
  
  Embroidery design sizes: 35 Designs fit within a 4" x 4" hoop. One bonus design included for large format hoops (design measures 5.95" x 6.35")
  
  Software requirements: Embroidery software and/or hardware to transfer design files from CD to embroidery machine.
  

• 8 Projects with step-by-step instructions


• 2 Complete appliqué alphabets and 26 embroidery designs on CD


• Printable patterns

• 3.4" x 6.3" Curved heat plate
  
• Three temperature settings
  
• Auto shut-off
  
• Wrinkle-free application
  
• Comfortable grip
  
• 7” x 4” insulated safety base
  
  

• 3.4" x 6.3" Curved heat plate
  
• Three temperature settings
  
• Auto shut-off
  
• Wrinkle-free application
  
• Comfortable grip
  
• 7” x 4” insulated safety base
  
  

• An add-on to your Totally Tubular Pressing or Hooping Station
  
• Pressing curved items likes hat crowns, cap bills, straps, slings, and more
  
• Superior heat-resistance while pressing curved items
  
• Applying applique, patches, rhinestones, HTV, and more
  
  *post and board NOT INCLUDED. Works with the Totally Tubular Pressing or Hooping Station
  
  

• Transform a crew neckline into a laced front opening.
  
• Embellish sleeves with coordinating designs.
  
• Relax a tight hem area with side seam embroidery.
  
• Add a back hem extension with decorative details.
  
  The download includes:
  
• 24 Designs!
  
• 8 Neckline designs
  
• 7 Sleeve designs
  
• 9 Hemline Sideseam designs
  
• Step-by-step printable instructions for easy T-shirt Remakes. Transform the neckline, embellish the sleeve and accent the sideseam hem area.
  
  All Designs fit in 5” x 7” with two bonus Jumbo designs (6” x 10” hoop and 8” x 14” hoop).
  
  Embroidery Formats: ART, C2S, DST, EXP, HUS, JEF, PES, VIP, VP3
  Requirements: 5” x 7” hoop, 6” x 10” or 8” x 14” hoop
  Adobe Acrobat Reader (Free download: www.adobe.com/reader)

• Specially digitized designs make it simple to change the shape of the shirt's neckline and add classy motifs all in the same hooping - no sewing skills required!
  
• Embellish sleeves with coordinating designs.
  
• Transform and relax a tight hemline with side seam embroidery.
  
• Add coordinating border designs to the hemline.
  
• Bonus Back Bling designs add a special unique touch.
  
  Necklines to Hemlines I contains 3 collections to transform necklines, sleeves, side seams and hemlines. All three necklines require one hooping in the 6” x 10” hoop or two hoopings in the 5” x 7” hoop. All three side seam designs require one hooping in the 6” x 10” hoop or two hoopings in the 5” x 7” hoop. All five sleeves come in right and left versions and require just one hooping in the 5” x 7”hoop. Both border designs require two 5” x 7” hoopings. Both back bling designs require one 5” x 7” hooping.

Part 2 of the best-selling Simple to Chic T-Shirt Remakes is Here!

Three New Shirts With 34 neckline, hemline and sleeve designs!!

Just in time for your customer's Fall Fashion makeovers!

• Specially digitized designs make it simple to change the shape of the shirt's neckline and add classy motifs all in the same hooping - no sewing skills required!


• Embellish sleeves with coordinating designs.


• Transform and relax a tight hemline with side seam embroidery.


• Add coordinating border designs to the hemline.


• Bonus Back Bling designs add a special unique touch.

Necklines to Hemlines ii is a multi-format CD with 34 designs to transform necklines, sleeves,and hemlines. 

• 8 embroidery designs for the 160mm x 230mm hoop (6x9")
  
• 6 embroidery designs for the 130mm x 180mm hoop (5x7")

• 8 Embroidery designs in two sizes*
  (160mm x 230mm and 130mm x 180mm)
  
• Six 6 1/2" x 10 1/2" and Six 5" x 7" blocks
  
• One 4" x 10 1/4" and One 4" x 7" rectangular border
  
• One 4" square cornerstone design
  
• Eileen's Reversible Quilting Technique:- Projects look beautiful from the front and back!
  
• Step-by-step instructions for making one 36 1/2" x 57 1/2" quilt with large block

• Place the Hoop Mat on a flat work surface
  
• Center the outer ring (standard hoop) or bottom metal frame (Snap Hoop Monster®) on the mat's grid
  
• Place stabilizer/fabric over the hoop
  
• Insert inner ring (standard hoop) or place magnetic top frame (Snap Hoop Monster®) on the fabric/stabilizer
  
  

• embroidery designs for 6" x 10" and 8" x 12" hoops (includes 9 dog blocks of different dog breeds!)
  
• instructions, color sequence charts, and templates

• 9 Embroidery designs in two sizes (160mm x 230mm and 130mm x 180mm)
  
  
• Eileen's Reversible Piecing Technique
  
  
• Step-by-step instructions for making two quilts with large blocks

• Design Placement is Easy!
  
  The Embroiderer's Helper is an easy solution for positioning left and right chest embroidery designs on tees, sweatshirts, and placket shirts. No more guesswork or misaligned designs! Compatible for shirt sizes from Small to Extra Large.
  
  
  


• Ideal for Placket Shirts
  
  Place the top left or right corner in the middle of the top button. Place a target sticker or mark the upper and lower placement notches to make it easy to keep the design straight in the hoop.
  
  
  Align the curved button notch on the Embroiderer's Helper with the top button. Place a target sticker or other marking device in the notch that corresponds with the shirt size.
  
  
  
  
• Ideal for T's and Sweatshirts
  
  Fold the shirt in half. Align the template's curved neckline at the bottom of the shirt's neck ribbing.
  
  
  
  To mark the center of the design, place a target sticker or other marking device in the upper notch that corresponds with the shirt size.
  
  
  
  If desired, place a second target sticker or other marking device in the next set of notches. Placing a target sticker in both notches ensures the garment stays square while hooping.
  
  
  
  The upper Target Sticker marks the center of the embroidery design. The lower Target Sticker can be used to ensure the shirt stays straight during hooping. Use one or both locations, whichever is most helpful to you.
  
  
  
  The Embroiderer's 'Lil Helper
  
  
  This clever little tool delivers big results for left chest pocket embroidery
  
  This is a fast and simple tool for positioning embroidery designs above pockets.
  Place the 'Lil Helper's zero mark on the center top of the pocket. The pocket's outside edges will hit the ruler in equal increments on both sides. Align a target sticker with the correct height marking for the center of the design. Determine the design's center by adding half the design's height plus the distance from the top of the pocket to the bottom of the design.
  
  

• T-shirts and Sweatshirts:
  For left chest embroidery, simply flip the template.
  
  
• Placket Shirts:
  Place the top left or right corner in the middle of the top button.
  
  Place a target sticker or mark the upper and lower placement notches to make ti easy to keep the design straight in the hoop.
  
  
• No more guesswork!
  Design placement on left and right chest embroidery is accurate every time!
  
  
• Quick & Easy!
  Simply select the garment size and place a Target Sticker along the alignment marks.
  
  
• Consistent and Accurate Results Every Time!
  Stitch a stack of shirts quickly and easily!

• 1000 meter Exquisite Thread
  
• 40 weigh

• Seedling
  
• Paprika
  
• Cobalt Blue
  
• Desert Rose
  
• Matches the MicroPrint Fabric

• 1000 meter Exquisite Thread
  
• 40 weigh

• Ideal for every embroiderer-novice to seasoned professional.
  
• No learning curve required! Use the easy to follow instructions for expert results.
  
• Spend more time embroidering and less time doing rework!
  
• Improve the quality of your embroidery.
  
• Stretch your embroidery budget.
  
  The Embroidery Tool Kit is ideal for any embroiderer from the novice to the seasoned professional. No learning curve required! Use the easy to follow instructions for expert results.
  
  Now you can spend more time embroidering and less time doing rework while improving the quality of your embroidery and stretching your embroidery budget.
  

• ½ yd. fleece, wool or knit fabric
  
• Appliqué fabrics – E-Stitch flower (fleece is used in the sample)
  
• ½” paper-backed fusible web tape
  
• Stretch gathered lace trim – optional hem
  
• Stretch fold over elastic trim – optional hem
  
  Collection includes:
  
• 12 embroidery designs for both left and right gloves
  
• PDF patterns
  
• Printable PDF instructions to make all projects
  
  Embroidery Formats: C2S, DST, EXP, HUS, JEF, PES, VIP, VP3, XXX
  Design Sizes: up to 179x128mm (5” x 7”)
  Requirements: 5” x 7”
  Adobe Acrobat Reader (Free download: www.adobe.com/reader)

Organize Your Studio!

Make your embroidery studio your favorite place to be with the help of the Stitching Sisters! Authors and sisters Marie Zinno and Eileen Roche have both recently reorganized their home embroidery studios, and they're sharing what they learned with you!

Inside this 64-page book, Marie and Eileen will guide you through six easy steps to reorganizing your studio. You'll learn to evaluate what you have and what you need, plan the studio layout with an embroiderer's unique needs in mind, set a budget, designate an area for each function, and then set your plan in motion!

Marie and Eileen share their reorganization experiences throughout the book and include lots of photos of their studio space and storage solutions along with a few "before" photos that keep them motivated to stay organized.

So gather your embroidery studio wish list and get your home studio organized and efficient in six easy steps!