Product Description

Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand, belt tension adjusted, belt guard installed, and sewn off, You only have to set up the thread stand. It ships from Atlanta

Industrial Sewing Machine & Power Stand, Large M Bobbin, 9mm S.L., 9/16mm Foot Lift, The best basic upholstery machine on the market and the only one still made in Japan along with safety clutch, Optional 1508/H heavier duty model. Fully Assembled Ready To Sew!
Complete with Table, Stand, 110V Motor and Drawer

Comparison: All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki DNU-241H . Will fit standard cut out.

  • Single Needle
  • Safety Clutch to protect hook and put back into timing if knocked out.
  • Compound Needle Feed And Walking Foot
  • Speed up to 3000 Stitches Per Minute
  • 9 Mm Stitch Length
  • Industrial Upholstery Machine

  • US Warranty 30 Days labor on defects in materials and workmanship.
  • Non-US Warranty: 30 days parts and labor
Specifications
  • With its larger needlebar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness
  • Alternating vertical movements of the walking foot and presser foot are as large as 6.5 mm
  • In addition, the ratio between alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes
  • Rectangular feed prevents needle from fraying
  • Sews multi-layered parts of a material with consistent stitching pitch while preventing stitch gathering
  • When the thread is caught in the hook or any other sewing trouble occurs, the safety mechanism will automatically operate to prevent the machine from being damaged
  • Stitch length can be easily selected by the stitch dial
  • Includes a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel
  • Knee-lifter mechanism is built in the bed which reduces the pressure required to operate facilities setup
  • Machine's full open-type top design makes adjusting works easier
  • Machine comes with a lubricating mechanism that uses a centralized oil wick which substantially reduces the time and trouble required for oiling the machine
  • A walking foot mechanism is built into the machine arm to prevent oil from scattering
  • Stitch length: 9 mm
  • Needle bar stroke: 36 mm
  • Presser foot lift clearance by hand: 9 mm
  • Presser foot lift clearance by knee: 16 mm
  • Hook type: Horizontal-axis full-rotary double-capacity hook
  • Needle: 135 x 17
  • Thread: #30
  • #5, B46
  • B138, Nm=60/3
  • 15/3
  • Distance from needle to machine arm: 10.3"
  • Bed size is 477mm 178mm, or 18.75" x 7" standard flatbed.
  • Weight of machine head: 80.47 lbs
  • UL Listed



    Please review our Freight LTL Shipping Policies
    Ships Ground Freight only.

    Downloads (.PDF)
    • Instruction Manual
    • Specifications
    • Parts list
    • Product Brochure

Included Accessories
  • Instruction manual

Comparisons

Juki 1541H means Heavy Duty feed dogs with fewer but larger teeth and bigger hole in foot and plate for heavier thread and larger size needles. Otherwise the 1541 and 1541H are the same. 1541SC or 1541H-SC is Safety Clutch model which has a silver button to the right of the needle plate. When you hold the button down with your left index finger while turning the handwheel with your right hand, it will put the machine back in time in case it has been knocked out of time. Needle system is 135x17 upholstery. Maximum size is 24 which has the largest diameter and needle eye size for heavier threads.

F.A.Q.

I was referred to you about the Brother PQ15000S by Dwyana and told me to speak with you about tech stuff and options. I'm looking for a straight stitch machine to make horse halters, dog collars, and straps so I need a commercial grade type to be able to sew through about .01 inches - .45 inches of nylon webbing / nylon polyesters?
 The Brother PQ1500 is an apparel fabric machine and you need an upholstery material machine with built in walking foot and maybe needle feed* to prevent slippage.
The best straight stitch Walking Foot Portables (39) is Sailrite Ultrafeed LS-1 Straight Stitch Walking Foot Metal Portable Sewing Machine and Foot Control
for up to 1/4" material.
The best straight stitch Walking Foot Needle Feed (88) with Power Stand is Juki DNU1541 Walking Foot Needle Feed*, Big M Bobbin, 9mm Stitch Length, 9/16mmLift, SetUp PowerStand for up to 1/2" material.
The best needles to sew through horse halters, dog collars, straps and .01 inches - .45 inches of nylon webbing / nylon polyesters is Organ Cool Sew size 20 up, which prevents heat build up in the eye and thread melting, shredding or breaking, which can be a problem with the dense materials you are sewing on.

I have a JUKI DNU 1541, It appears that it does not have a safety clutch as the shiny safety clutch button on the base is solid and unmovable. My question is, can a safety clutch be added to to a non safety clutch machine? Bruce
 The DNU1541 cannot be converted to the DNU1541S. You would need to upgrade to one of our DNU1541S Safety Clutch machines. Juki

Related Categories

  • GPC: Home & Garden › Household Appliances › Sewing Machines