Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
Fast Frames 8 in 1 hoop set comes with 1 hoop holder arm, plus 6 sizes of single tubular and flat hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:
- The 19.25" wide hoop attachment holding arm for Brother PR600 series, Babylock EMP BMP
- 2" X 4" Mono Hoop
- 2.5" X 4" Pocket Hoop
- 3" X 4" Pocket Hoop
- 5" X 4" Christmas Stocking Hoop
- 6” Radius hat hoop for sides and backs of hats and caps
- 7" X 5" Attache case hoop
- 7"X 7" Deep Bag HOOP
-
12x7" Tubular Hoop Frame for Larger Handbags, Etc.
Key Benefits:
- Cut your hooping time down to 5 seconds, relief from carpel tunnel, and achieve excellent repeatability.
- Relief from carpel tunnel
- Excellent repeatability, great for multi head operations
Please note: Since this is not a Brother built product, PR600 Series machines will not recognize the frame size on the LCD Screen. Therefore, you will need to position designs properly to avoid needles or foot from hitting the edges of the frames. (do trial tracing test in layout)
Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment).
Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc.
Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
- The 19.25" wide hoop attachment holding arm for Brother PR600 series, Babylock EMP BMP
- 2 X 4 MONO HOOP
- 2.5 X 4 POCKET HOOP
- 3 X 4 POCKET HOOP
- 5 X 4 CHRISTMAS STOCKING HOOP
- 6” RADIUS HAT HOOP FOR SIDES AND BACKS OF HATS
- 7" X 5" ATTACHÉ CASE HOOP
- 7"X 7 " Deep Bag HOOP
- 12x7" Tubular Hoop Frame for Larger Handbags, Etc.
I always recommend AllBrands to EVERYONE! Wish there was a location near me!!