Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

*Durkee has less vibration with 3 times the thickness of frames with almost no vibration up and down, compared to Fast Frames.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Durkee EZ Frames from Emanuel Neiconi on Vimeo.

Infant Bodysuit Using Durkee EZ Frames and Multi Needle Embroidery Machine from Brent Taylor on Vimeo.

Infant Bodysuit Using Durkee EZ Frames and Multi Needle Embroidery Machine from Brent Taylor on Vimeo.

  • US Warranty Limited Lifetime
  • Non-US Warranty: 30 days parts and labor
Durkee‡ frames offer you a simple, yet effective way to hoop your more difficult-to-hoop items. Hold your fabric in place with our adhesive stabilizer and start stitching. This 8-piece set comes with the Main Attachment Arm, (1) 2” x 4”, (1) 2.5” x 4”, (1) 3” x 4”, (1) 5” x 4”, (1) 7” x 5”, and (1) 8” x 8” hoops, and Cap Back/Radius frame. Comes with Durkee’s limited lifetime replacement warranty. Adhesive stabilizer, SA5820 or SA5815 is required. Additional purchase required.

Eight (8) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:
  • 2" x 4"
  • 2.5" x 4"
  • 3" x 4"
  • 5" x 4"
  • 7" x 5"
  • 8" x 8"
  • 12" x 8"
  • Cap Back/Radius Frame

    It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
    We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Included Accessories
Includes Frames:
  • 2" x 4"
  • 2.5" x 4"
  • 3" x 4"
  • 5" x 4"
  • 7" x 5"
  • 8" x 8"
  • 12" x 8"
  • Cap Back/Radius Frame
Other Images

icon Durkee 8in1 EZ Tubular Hoop Aluminum Frames for Brother PR6 through PR1000

icon EZ Frames Maximum Width

icon EZ Frames Minimum Width

icon Durkee 8pc EZ Frames Combo Pack for Muti-Needle Machines Stitch comfortably up to 1,000 stitches per minute. Durable frames with 3/16” anodized aluminum. The hoops you need in one bundle.

Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns


Project #1 Baby Onesies

Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.

Project #2 Embroidered Stuffed Animals

Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.

Project #3 Christmas Stockings

Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.

Project #4 L/R Chest Embroidery

Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.

These are the additional sizes available for Alliance/Persona PRS100 and Six (6) and Ten (10) Needle Brother
and Baby Lock Machines with JUST A FEW of their potential uses. The sizes shown are available sewing fields.

1 1/2" x 4" - Sides & tongues of tennis shoes, collars, cuffs, and some shirt pockets, etc.
2 1/2" x 4" - Smaller pockets on tote bags, purses, etc.
3" x 4" - Smaller pockets on tote bags, purses, monograms on napkins, sides of caps, etc.
3" x 8" - Shirt sleeves, pant legs, monograms on boots, etc.
4" x 4" - Monograms and logos on tobogans, some left & right chest logos and monograms
5" x 5" - Common size used for left and right chest embroidery, stuffed animals, etc.
5" x 8" - Referred to by our customers as the “Onesie” frame, some shirt sleeves and pant legs, etc.
6" x 6" - Frequently used on larger tote bags, larger monograms and logos on children’s clothing, etc.
7" x 7" - Large tote bags, large embroidery on back packs, full fronts and/or backs on children’s clothing, etc.

Why won't my machine recognize the correct size of hoop I Have installed on the machine?
On the rare occasion this issue comes up, the answer is the same. . Durkee EZ Frames have nothing to do with the issue. In fact, the customer should take them off and set them aside to fix the problem. The “A” arm of the machine has multiple positioning locations that, when properly aligned, cause the machine to “recognize” the hoop attached to the arm. In this instance the word “recognize” refers ONLY to the hoops that came with the machine or other OEM hoops from Brother available for that machine. Those positions on the “A” arm are small slots or grooves. In order for the machine to recognize the correct hoop, the left side (adjustable arm that moves left and right) must align perfectly in any given slot and the knob that holds it tightly secured. If these two criteria are not met, the machine “assumes” the next smallest size hoop.

Thus, if the customer will remove any/all hoops or frames from the machine and adjust the “A” arm correctly in the proper slot and tighten the thumbscrew/knob securely, the machine will “think” it has a 7 7/8” x 11 7/8” hoop attached and the problem will be solved. This hoop is usually and inaccurately referred to as a 12 x 8 hoop. Brother identifies this hoop as their “Large” hoop. Because the machine “thinks” it has a 12 x 8 hoop in place is why the customer must ALWAYS center their #1 needle in the middle of the EZ Frame or hoop and trace their design.
Leola J, HorseshoeBend ID
I shop at all brands because of coupons and fast shipping. Excellent selection.